BASIC ENGINE
PAN GP-OILSUPPRESSION GP-SOUND
PISTON & ROD GP
CYLINDER BLOCK GP
BELT TIGHTENER GP
VALVE MECHANISM GP
CRANKSHAFT GP
MOUNTING GP-ENGINE
BASIC ENGINE
PAN GP-OIL
#SEBP32790070
183-1258: PAN GP-OIL
For full view, you need register
Parts for your 966G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3. | 6V-7238 | [1] | VALVE-SHUTOFF (ENGINE OIL PAN) | |
| 4. | 7E-3369 | [14] | SLEEVE-ISOLATOR | |
| 5. | 109-5308 | [1] | GASKET-OIL PAN | |
| 6. | 183-1259 | [1] | PAN-OIL | |
| 7. | 184-6658 | [1] | BELL AS-SUCTION | |
| 8. | 3E-8016 M | [2] | BOLT-SELF-LOCKING (M8X1.25X25-MM) | |
| 9. | 5P-8211 | [1] | SEAL-O-RING | |
| 10. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 6N-8863 | [14] | WASHER (10.2X32X2.5-MM THK) | |
| 12. | 6A-5591 M | [2] | BOLT (M12X1.75X25-MM) | |
| 13. | 6V-5230 M | [14] | BOLT (M10X1.5X60-MM) | |
| 14. | 7C-8296 | [14] | ISOLATOR | |
| 15. | 8L-2786 | [1] | SEAL-O-RING | |
| 16. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 121-0145 | [1] | SEAL-O-RING | |
| 18. | 9X-6451 | [1] | PLUG-DRAIN (MAGNETIC)(ENGINE OIL PAN) | |
| M | METRIC PART | |||
#SEBP32790071
183-1258: PAN GP-OIL
183-1258 PAN GP-OIL
S/N 3PD9676-21467
RIGHT SIDE DRAIN VALVE
PART OF 223-1553, 223-1556 ENGINE AR
S/N 3PD9676-21467
RIGHT SIDE DRAIN VALVE
PART OF 223-1553, 223-1556 ENGINE AR
For full view, you need register
Parts for your 966G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-7238 | [1] | VALVE-SHUTOFF (ENGINE OIL PAN) | |
| 2. | 9X-6451 | [1] | PLUG-DRAIN (MAGNETIC)(ENGINE OIL PAN) | |
| 3. | 184-6658 | [1] | BELL AS-SUCTION | |
| 4. | 217-3673 C | [1] | SEAL-ISOLATION | |
| 5. | 217-3674 C | [14] | FASTENER AS | |
| 6. | 235-1073 C | [1] | PAN-OIL | |
| 7. | 061-9458 C | [1] | SEAL-O-RING | |
| 8. | 3E-8016 M | [2] | BOLT-SELF-LOCKING (M8X1.25X25-MM) | |
| 9. | 5P-8211 | [1] | SEAL-O-RING | |
| 10. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 6A-5591 M | [2] | BOLT (M12X1.75X25-MM) | |
| 12. | 6N-8863 | [14] | WASHER (10.2X32X2.5-MM THK) | |
| 13. | 6V-4249 CM | [14] | BOLT (M10X1.5X50-MM) | |
| 14. | 8L-2786 | [1] | SEAL-O-RING | |
| 15. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP32790072
197-9561: PANEL GP-SOUND SUPPRESSION
197-9561 PANEL GP-SOUND SUPPRESSION
S/N 3PD1-471
PART OF 180-3191 ENGINE AR
S/N 3PD1-471
PART OF 180-3191 ENGINE AR
For full view, you need register
Parts for your 966G II WHEEL LOADER:
#SEBP32790073
132-3203: PISTON & ROD GP
132-3203 PISTON & ROD GP
S/N 3PD1-UP
16:1 RATIO
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
S/N 3PD1-UP
16:1 RATIO
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
For full view, you need register
Parts for your 966G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-7098 | [1] | CROWN AS-PISTON | |
| 2. | 197-9335 | [1] | PIN AS | |
| 2A. | 6I-2720 | [2] | PLUG-PIN | |
| 2B. | 168-7276 | [1] | PIN-PISTON | |
| 4. | 217-0577 | [1] | BEARING-CONNECTING ROD | |
| 128-0390 AB | BEARING-CONNECTING ROD (0.51-MM US) | |||
| 128-0391 AB | BEARING-CONNECTING ROD (0.76-MM US) | |||
| 5. | 155-6629 | [1] | ROD AS-CONNECTING | |
| 5A. | 7W-5844 | [1] | BEARING | |
| 5B. | 219-4458 | [2] | PIN-DOWEL | |
| 5C. | 7C-8639 M | [2] | BOLT-CONNECTING ROD | |
| 8. | 4P-1659 | [1] | RING-PISTON (OIL) | |
| 9. | 238-2710 | [1] | SKIRT-PISTON | |
| 10. | 168-7212 | [1] | RING-PISTON (TOP) | |
| 11. | 109-5319 | [1] | RING-PISTON (INTERMEDIATE) | |
| 12. | 8T-0100 M | [1] | BOLT (M8X1.25X60-MM) | |
| 13. | 3E-4352 | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 14. | 274-1587 | [1] | TUBE AS-OIL JET | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32790074
200-6085: PLUG GP-ENGINE
For full view, you need register
Parts for your 966G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-0623 | [1] | PLUG-CUP | |
| 2. | 8C-3445 | [1] | CAP-DUST | |
| 3. | 8C-3446 | [1] | VALVE-SAMPLING | |
| 4. | 3J-7354 | [1] | SEAL-O-RING | |
| 5. | 3K-0360 | [2] | SEAL-O-RING | |
| 6. | 5P-9617 | [1] | ADAPTER | |
| 7. | 6V-4589 | [1] | SEAL-O-RING | |
| 8. | 6V-5049 | [4] | SEAL-O-RING | |
| 9. | 9S-4191 | [3] | PLUG (9/16-18-THD) | |
| 10. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
| 11. | 9X-6650 | [1] | CONNECTOR-O-RING | |
| 12. | 9S-8005 | [1] | PLUG (3/4-16-THD) |
#SEBP32790075
200-6085: PLUG GP-ENGINE
For full view, you need register
Parts for your 966G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-0623 | [1] | PLUG-CUP | |
| 2. | 8C-3445 | [1] | CAP-DUST | |
| 3. | 8C-3446 | [1] | VALVE-SAMPLING (ENGINE OIL) | |
| 4. | 3J-7354 | [1] | SEAL-O-RING | |
| 5. | 148-8395 | [1] | PLUG AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 6. | 5P-9617 | [1] | ADAPTER | |
| 7. | 201-4340 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 8. | 6V-5049 | [4] | SEAL-O-RING | |
| 9. | 9S-4191 | [3] | PLUG (9/16-18-THD) | |
#SEBP32790076
185-7250: PULLEY GP-IDLER
For full view, you need register
Parts for your 966G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-0862 | [1] | PULLEY AS-IDLER | |
| 1A. | 6V-9027 | [1] | SEAL-O-RING | |
| 1B. | 124-7792 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 1C. | 144-8122 M | [1] | BOLT-SPECIAL (M10X1.5X65-MM) | |
| 1D. | 144-8123 | [1] | SPACER-SPECIAL | |
| 1E. | 145-2901 | [1] | COVER-DUST | |
| 2. | 185-7251 | [1] | SUPPORT AS | |
| 3. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
#SEBP32790077
115-9397: ROCKER ARM GP
For full view, you need register
Parts for your 966G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-9398 | [2] | ARM-VALVE ROCKER (EXHAUST) | |
| 2. | 115-9400 | [2] | ARM AS (UNIT INJECTION) | |
| (EACH INCLUDES) | ||||
| 2D-6642 | [2] | BALL | ||
| 115-9402 | [1] | BEARING | ||
| 3. | 115-9399 | [2] | ARM-VALVE ROCKER (INLET) | |
| 4. | 7C-1798 | [2] | SCREW-ARM ADJUSTMENT | |
| 5. | 245-6095 | [2] | NUT-HEX THIN (M12X1.5-THD)(CLASS 10, HEAT TREATED) | |
| 6. | 258-8721 | [2] | BUTTON | |
| 7. | 8L-2777 | [2] | SEAL-O-RING | |
| 8. | 115-9403 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 9. | 3S-6605 | [1] | PLUG-CUP | |
| 10. | 096-0014 | [1] | PIN-SPRING | |
| 11. | 185-4461 | [2] | SUPPORT AS | |
| (EACH INCLUDES) | ||||
| 12. | 180-1538 | [2] | DOWEL | |
| 13. | 183-4365 M | [4] | SCREW-ADJUSTMENT (M10X1.5-THD) | |
| 14. | 2Y-5829 M | [4] | NUT (M10X1.5-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32790078
116-1091: SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT -REAR
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
For full view, you need register
Parts for your 966G II WHEEL LOADER:
#SEBP32790079
183-5518: SUPPORT GP-ENGINE
183-5518 SUPPORT GP-ENGINE
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
For full view, you need register
Information:
BASIC ENGINE
PAN GP-OIL
Disassembly and Assembly
Service Magazine
