AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

213-4941 WIRING GP-FRONT S/N AXJ822-1515 PART OF 180-0579 ELECTRICAL AR 966G II WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

WHEEL LOADER 966G II WHEEL LOADER AXJ
 966G II Wheel Loader AXJ00001-UP (MACHINE) POWERED BY 3176 Engine SEBP3279 966G II AXJ   (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FRONT
180-3562 WIRING GP-FRONT
WIRING GP-FRONT
213-4941 WIRING GP-FRONT
WIRING GP-FRONT
213-4941 WIRING GP-FRONT
WIRING GP-FRONT
213-4941 WIRING GP-FRONT
WIRING GP-LIGHTING
215-1889 WIRING GP-LIGHTING
WIRING GP-LIGHTING
215-1889 WIRING GP-LIGHTING
 

#SEBP32790330
 

213-4941: WIRING GP-FRONT

213-4941 WIRING GP-FRONT
S/N AXJ822-1515
PART OF 180-0579 ELECTRICAL AR
i01823517 SEBP3279
2134941 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-1225 C [7] WASHER (11X22X6-MM THK)  
2. 5V-6152 [4] CLAMP  
3. 5V-6153 [2] PLATE-COVER  
4. 222-1687 C [1] HARNESS AS-FRONT CHASSIS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  8T-8737 [47] PLUG-SEAL  
  9X-0141 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3490 [2] SEAL-CONNECTOR (40-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
5. 033-8248 C [5] CLIP (LOOP)  
6. 130-5300 C [9] CLIP  
7. 4K-8864 C [2] CLIP (LOOP)  
8. 5P-9297 C [2] CLIP (LOOP)  
9. 6D-4244 [1] CLIP (LOOP)  
10. 6D-4246 [6] CLIP (LOOP)  
11. 8M-2770 C [2] CLIP (LOOP)  
12. 8T-3844 M [2] BOLT (M6X1X70-MM)  
13. 8T-4121 C [24] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 CM [20] NUT (M10X1.5-THD)  
15. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
16. 8T-6974 M [2] BOLT (M6X1X80-MM)  
17. 9M-8406 C [4] CLIP (LOOP)  
18. 9X-8250 [1] CLIP  
19. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP32790331
 

213-4941: WIRING GP-FRONT

213-4941 WIRING GP-FRONT
S/N AXJ1516-UP
PART OF 180-0579 ELECTRICAL AR
i02127870 SEBP3279
2134941 WIRING GP-FRONT Parts scheme 2134941 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-1225 C [5] WASHER (11X22X6-MM THK)  
2. 5V-6152 [4] CLAMP  
3. 5V-6153 [2] PLATE-COVER  
4. 7K-1181 C [3] STRAP-CABLE  
5. 236-8607 C [1] HARNESS AS-FRONT CHASSIS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  5P-1506 E HOSE (59-CM)  
  8T-8737 [47] PLUG-SEAL  
  7K-1181 [1] STRAP-CABLE  
  9X-0141 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3490 [2] SEAL-CONNECTOR (40-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS & WEDGE)
6. 033-8248 [5] CLIP (LOOP)  
7. 130-5300 C [7] CLIP  
8. 132-5789 C [1] CLIP (LADDER)  
9. 4K-8864 [2] CLIP (LOOP)  
10. 5P-9085 C [1] CLIP (LOOP)  
11. 6D-4244 [1] CLIP (LOOP)  
12. 6D-4246 [6] CLIP (LOOP)  
13. 8M-2770 [2] CLIP (LOOP)  
14. 8T-3844 M [2] BOLT (M6X1X70-MM)  
15. 8T-4121 C [20] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 CM [16] NUT (M10X1.5-THD)  
17. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
18. 8T-6974 M [2] BOLT (M6X1X80-MM)  
19. 9M-8406 [4] CLIP (LOOP)  
20. 9X-8250 [1] CLIP  
21. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP32790332
 

215-1889: WIRING GP-LIGHTING

215-1889 WIRING GP-LIGHTING -ROADING
S/N AXJ821-UP
PART OF 212-1545 LIGHTING AR-ROADING
i01702294 SEBP3279
2151889 WIRING GP-LIGHTING Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-7500 [2] SPACER (11X25X50-MM THK)  
2. 215-1882 [1] HARNESS AS-LIGHTING (ROADING, RH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS & WEDGE)
3. 215-1883 [1] HARNESS AS-LIGHTING (ROADING, LH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS & WEDGE)
4. 130-5300 [6] CLIP  
5. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
 

#SEBP32790333
 

215-1889: WIRING GP-LIGHTING

215-1889 WIRING GP-LIGHTING -ROADING
S/N AXJ1-UP
PART OF 212-1545, 253-3926 LIGHTING AR-ROADING
i01963941 SEBP3279
2151889 WIRING GP-LIGHTING Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 C [1] STRAP-CABLE  
2. 138-7500 [2] SPACER (11X25X50-MM THK)  
3. 228-2516 C [1] HARNESS AS-LIGHTING (ROADING, RH)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS & WEDGE)
4. 228-2517 C [1] HARNESS AS-LIGHTING (ROADING, LH)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS & WEDGE)
5. 130-5300 C [4] CLIP  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP32790334
 

135-6782: WIRING GP-RIDE CONTROL

135-6782 WIRING GP-RIDE CONTROL
S/N AXJ1-UP
PART OF 199-7858, 273-9526 CONTROL AR-RIDE, 250-3730 HYDRAULIC AR-MACHINE, 265-7158 LOGGING AR
i00782629 SEBP3279
1356782 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 6K-0806 [2] STRAP-CABLE  
3. 130-5300 [1] CLIP  
4. 136-1880 [1] HARNESS AS-RIDE CONTROL  
5. 160-0564 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 5P-9085 [2] CLIP (LOOP)  
7. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
9. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
11. 130-5301 [1] CLIP  
  M   METRIC PART
 

#SEBP32790335
 

184-7259: WIRING GP-SECONDARY STEERING

184-7259 WIRING GP-SECONDARY STEERING
S/N AXJ1-UP
PART OF 190-1271, 253-5213 STEERING AR-SECONDARY
i01449299 SEBP3279
1847259 WIRING GP-SECONDARY STEERING Parts scheme 1847259 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)  
    SECONDARY STEERING INTERMEDIATE
2. 230-5771 [1] SWITCH AS-PRESSURE (SECONDARY STEERING OIL)  
2A. 230-5771 [1] SWITCH AS-PRESSURE (PRIMARY STEERING OIL)  
    (EACH SWITCH AS INCLUDES)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
3. 3S-2093 [8] STRAP-CABLE  
4. 4H-1225 [2] WASHER (11X22X6-MM THK)  
5. 7K-1181 [2] STRAP-CABLE  
6. 8C-6358 [1] BLOCK AS-JUNCTION (BATTERY)  
  1D-5117 [3] NUT-JAM (1/2-13-THD)  
  8T-3519 [3] BOLT-BRONZE (1/2-13X2-IN)  
7. 122-0493 [1] COVER  
8. 184-7261 [1] HARNESS AS-STEERING (SECONDARY)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  8T-8737 [2] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
9. 189-5604 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 198-6754 [1] CABLE AS  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0761 BE CABLE (00-GA, RED)  
11. 198-6755 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 BE CABLE (00-GA, BLACK)  
12. 198-6756 [1] CABLE AS  
  5P-0761 BE CABLE (00-GA, RED)  
  8N-0869 [2] COVER-TERMINAL (RED)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
13. 199-0628 [1] CABLE AS  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  8N-0869 [2] COVER-TERMINAL (RED)  
  5P-0761 BE CABLE (00-GA, RED)  
14. 205-7299 [2] CLIP  
15. 033-8248 [2] CLIP (LOOP)  
16. 2A-2677 [2] SPACER (10.7X17.14X19.05-MM THK)  
17. 3K-0360 [2] SEAL-O-RING  
18. 5P-9297 [1] CLIP (LOOP)  
19. 6K-8178 [2] CLIP (LOOP)  
20. 7N-3718 [2] CLIP  
21. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
23. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
24. 8T-4171 M [1] BOLT (M6X1X12-MM)  
25. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
26. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
27. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 8T-4244 M [1] NUT (M12X1.75-THD)  
29. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
30. 218-4935 [1] SUPPRESSOR-ARC  
31. 7F-0560 [5] WASHER (0.516X0.938X0.101-IN THK)  
32. 6V-8188 [6] NUT (1/2-13-THD)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP32790336
 

117-2760: WIRING GP-UNIT INJECTOR

117-2760 WIRING GP-UNIT INJECTOR
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i00827117 SEBP3279
1172760 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9537 [1] HARNESS AS-WIRING (UNIT INJECTOR)  
  103-8133 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 2V-3216 [4] CLIP  
3. 7X-2468 [3] CLIP  
4. 7E-6508 [6] CAP AS  
5. 6V-8214 M [9] BOLT (M6X1X20-MM)  
6. 5P-0537 [9] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP32790337
 

179-1666: AXLE & AXLE OIL COOLER AR

179-1666 AXLE & AXLE OIL COOLER AR
S/N AXJ1-UP
CANNOT BE USED WITH @@@@@151-2111@@@@@, @@@@@146-4202@@@@@, @@@@@129-4286@@@@@, @@@@@129-4282@@@@@, @@@@@146-4203@@@@@, @@@@@129-4283@@@@@
i01832602 SEBP3279
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  139-9102 Y [1] AXLE AR-FIXED (FRONT, STANDARD DIFFERENTIAL)  
  139-9103 Y [1] AXLE AR-OSCILLATING (REAR, LIMITED SLIP DIFF)(W/HEAT EXHANGER)  
    -OR-
  203-2369 Y [1] AXLE AR-OSCILLATING (REAR, LIMITED SLIP DIFF)(W/HEAT EXHANGER)  
  218-1965 Y [1] COOLER GP-HYDRAULIC & AXLE OIL  
    S/N AXJ821-UP
  160-0719 Y [1] HEAT EXCHANGER GP-AXLE  
  139-9106 Y [1] HOUSING GP-OSCILLATING AXLE  
  145-9537 Y [1] LINES GP-AXLE OIL COOLER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32790338
 

129-4280: AXLE AR-FIXED

129-4280 AXLE AR-FIXED -FRONT, STANDARD DIFFERENTIAL
S/N AXJ1-UP
PART OF 183-1426 POWER TRAIN AR
i00824734 SEBP3279
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  129-4289 Y [2] BRAKE & PLANETARY GP  
  129-4298 Y [1] DIFFERENTIAL GP (STANDARD)  
  129-4290 Y [1] GEAR GP-BEVEL & PINION  
  129-4291 Y [1] HOUSING GP-FIXED AXLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32790339
 

129-4282: AXLE AR-FIXED

129-4282 AXLE AR-FIXED -FRONT, LIMITED SLIP DIFFERENTIAL
S/N AXJ1-UP
i04802864 SEBP3279
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  129-4289 Y [2] BRAKE & PLANETARY GP  
  372-4769 CY [1] DIFFERENTIAL GP-LIMITED SLIP  
  129-4290 Y [1] GEAR GP-BEVEL & PINION  
  129-4291 Y [1] HOUSING GP-FIXED AXLE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines
CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines
CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines
CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 966G II :

WIRING GP-FRONT
213-4941 WIRING GP-FRONT
WIRING GP-FRONT
180-3562 WIRING GP-FRONT
WIRING GP-FRONT
180-3562 WIRING GP-FRONT
WIRING GP-FRONT
180-3562 WIRING GP-FRONT
WIRING GP-ENGINE
216-9607 WIRING GP-ENGINE
WIRING GP-ENGINE
180-3561 WIRING GP-ENGINE
WIRING GP-ENGINE
180-3561 WIRING GP-ENGINE
WIRING GP-ENGINE
180-3561 WIRING GP-ENGINE
WIRING GP-FRONT
213-4941 WIRING GP-FRONT
WIRING GP-LIGHTING
215-1889 WIRING GP-LIGHTING
WIRING GP-LIGHTING
215-1889 WIRING GP-LIGHTING
WIRING GP-RIDE CONTROL
135-6782 WIRING GP-RIDE CONTROL
WIRING GP-SECONDARY STEERING
184-7259 WIRING GP-SECONDARY STEERING
WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
179-1666 AXLE & AXLE OIL COOLER AR
129-4280 AXLE AR-FIXED

Truck sale:

Caterpillar 966GII, Construction
64,000 USD 
Caterpillar 966GII, Construction
- Wheel Loaders
H.O. PENN MACHINERY CO., INC.
Caterpillar 966GII, Construction
 
Caterpillar 966GII, Construction
- Wheel Loaders
NMC
Caterpillar 966GII, Construction
55,000 
Caterpillar 966GII, Construction
- Wheel Loaders
NMC
Caterpillar 966GII, Construction
75,800 
Caterpillar 966GII, Construction
- Wheel Loaders
EMPIRE MACHINERY
Caterpillar 966GII, Construction
73,750 
Caterpillar 966GII, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.