AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

204-0724 LIGHTING GP-SIGNAL S/N AYL1-UP PART OF 190-1111, 253-3927 LIGHTING AR-SIGNAL 950G II WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
SENSOR GP
CIRCUIT BREAKER GP
SENSOR GP

WHEEL LOADER 950G II WHEEL LOADER AYL
 950G II Wheel Loader AYL00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3280 950G II AYL   (1999)

ELECTRICAL AND STARTING SYSTEM

LIGHTING GP
LIGHTING GP-ROADING
215-1888 LIGHTING GP-ROADING
LIGHTING GP-ROADING
215-1888 LIGHTING GP-ROADING
LIGHTING GP-SIGNAL
204-0724 LIGHTING GP-SIGNAL
LIGHTING GP-WARNING BEACON
150-3918 LIGHTING GP-WARNING BEACON
LIGHTING GP-WARNING BEACON
200-0934 LIGHTING GP-WARNING BEACON
LIGHTING GP-WARNING BEACON
253-3938 LIGHTING GP-WARNING BEACON
 

#SEBP32800250
 

204-0724: LIGHTING GP-SIGNAL

204-0724 LIGHTING GP-SIGNAL
S/N AYL1-UP
PART OF 190-1111, 253-3927 LIGHTING AR-SIGNAL
i01599876 SEBP3280
2040724 LIGHTING GP-SIGNAL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6466 Y [2] LAMP GP-SIGNAL (24-VOLT)(FRONT TURN)  
2. 162-2073 Y [2] LAMP GP-SIGNAL (24-VOLT, REAR TURN)(REAR TURN)  
3. 5C-2890 M [12] NUT (M6X1-THD)  
4. 9X-8256 [12] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800251
 

150-3918: LIGHTING GP-WARNING BEACON

150-3918 LIGHTING GP-WARNING BEACON
S/N AYL1-UP
PART OF 213-6481 CONVERSION AR-ROADING
i00707904 SEBP3280
1503918 LIGHTING GP-WARNING BEACON Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 6V-6635 [4] SCREW-PAN HEAD (10-14X0.5-IN)  
3. 9R-7941 [1] SOCKET AS  
4. 108-1029 Y [1] LAMP GP-WARNING BEACON (24-VOLT)  
5. 139-3396 [1] HARNESS AS-LIGHTING (WARNING BEACON)  
6. 129-0337 [1] PLATE AS  
7. 102-9862 [1] SWITCH AS (WARNING LAMP)  
  3E-8822 [1] ACTUATOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800252
 

200-0934: LIGHTING GP-WARNING BEACON

200-0934 LIGHTING GP-WARNING BEACON
S/N AYL1-UP
PART OF 213-6481 CONVERSION AR-ROADING
i01449528 SEBP3280
2000934 LIGHTING GP-WARNING BEACON Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 9R-7941 [1] SOCKET AS  
  9R-7980 [1] COVER  
3. 108-1029 Y [1] LAMP GP-WARNING BEACON (24-VOLT)  
4. 139-3396 [1] HARNESS AS-LIGHTING (WARNING BEACON)  
5. 219-9522 [1] SWITCH AS-ROCKER (WARNING BEACON)  
6. 204-7851 [1] BRACKET AS  
7. 205-6300 [1] BRACKET  
8. 6V-6635 [4] SCREW-PAN HEAD (10-14X0.5-IN)  
9. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
10. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800253
 

253-3938: LIGHTING GP-WARNING BEACON

253-3938 LIGHTING GP-WARNING BEACON
S/N AYL1-UP
PART OF 279-4010 CONVERSION AR-ROADING
FOR USE WITH 250-3730 CONTROL AR, 250-3731 CONVERSION AR-MACHINE, 250-3728 CONTROL AR, 250-3729 CONTROL AR
i02107092 SEBP3280
2533938 LIGHTING GP-WARNING BEACON Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 9R-7941 [1] SOCKET AS  
  9R-7980 [1] COVER  
3. 108-1029 Y [1] LAMP GP-WARNING BEACON (24-VOLT)  
4. 139-3396 [1] HARNESS AS-LIGHTING (WARNING BEACON)  
5. 204-7851 [1] BRACKET AS  
6. 205-6300 [1] BRACKET  
7. 237-9736 [1] SWITCH AS-ROCKER (WARNING BEACON)(24-VOLT, ROTATING BEACON)  
8. 6V-6635 [4] SCREW-PAN HEAD (10-14X0.5-IN)  
9. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
10. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800254
 

126-7714: MOUNTING GP-PRESSURE SENSOR

126-7714 MOUNTING GP-PRESSURE SENSOR -AUTODIG, PAYLOAD
S/N AYL1-UP
PART OF 251-0734 CONTROL AR-AUTODIG, 192-3981 MONITOR AR-PAYLOAD
i00745342 SEBP3280
1267714 MOUNTING GP-PRESSURE SENSOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
3. 9R-4921 I [1] HOSE AS  
4. 122-2222 [1] ADAPTER  
5. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER OIL)  
6. 127-5778 [1] TEE-O-RING PORT  
7. 130-5300 [1] CLIP  
8. 132-1451 [1] BRACKET AS  
9. 147-2764 [1] HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL)  
10. 3J-1907 [3] SEAL-O-RING  
11. 5P-9085 [2] CLIP (LOOP)  
12. 6V-8185 [2] NUT (1/4-20-THD)  
13. 6V-8397 [4] SEAL-O-RING  
14. 6V-8636 [1] CONNECTOR  
15. 6V-9850 [1] ELBOW  
16. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4133 M [1] NUT (M10X1.5-THD)  
18. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
19. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
20. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800255
 

224-5799: MOUNTING GP-PRESSURE SENSOR

224-5799 MOUNTING GP-PRESSURE SENSOR -PAYLOAD
S/N AYL1-UP
PART OF 224-9882 MONITOR AR-PAYLOAD
i01951898 SEBP3280
2245799 MOUNTING GP-PRESSURE SENSOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 122-2222 [1] ADAPTER  
3. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER HEAD END)  
4. 126-6872 [1] TEE  
5. 147-2764 [1] HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  8T-8737 [1] PLUG-SEAL  
6. 222-9995 [1] BRACKET AS  
7. 130-5300 [1] CLIP  
8. 125-9488 I [1] HOSE AS  
9. 3J-1907 [3] SEAL-O-RING  
10. 5P-9085 [3] CLIP (LOOP)  
11. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
12. 6V-8397 [4] SEAL-O-RING  
13. 6V-8636 [1] CONNECTOR  
14. 6V-9850 [1] ELBOW  
15. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [1] NUT (M10X1.5-THD)  
17. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800256
 

224-5800: MOUNTING GP-PRESSURE SENSOR

224-5800 MOUNTING GP-PRESSURE SENSOR -PAYLOAD
S/N AYL1-UP
PART OF 224-9883, 224-9885 MONITOR AR-PAYLOAD
i01964343 SEBP3280
2245800 MOUNTING GP-PRESSURE SENSOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 122-2222 [1] ADAPTER  
3. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER OIL)  
4. 125-9488 I [1] HOSE AS  
5. 126-6872 [1] TEE  
6. 147-2764 [1] HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
  8T-8737 [1] PLUG-SEAL  
7. 222-9995 [1] BRACKET AS  
    (EACH INCLUDES)
  110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
8. 130-5300 [1] CLIP  
9. 3J-1907 [2] SEAL-O-RING  
10. 5P-9085 [3] CLIP (LOOP)  
11. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
12. 6V-8397 [2] SEAL-O-RING  
13. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [1] NUT (M10X1.5-THD)  
15. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800257
 

190-5098: PANEL GP-CIRCUIT BREAKER

190-5098 PANEL GP-CIRCUIT BREAKER
S/N AYL1-UP
PART OF 190-5096 WIRING GP-CHASSIS
i01477639 SEBP3280
1905098 PANEL GP-CIRCUIT BREAKER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 7V-9275 [1] STRAP  
3. 125-1302 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
4. 149-2612 [1] RELAY AS (24-VOLT)(HOOD TILT MOTOR)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
5. 167-0138 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)  
6. 190-5102 [1] WIRE AS  
7. 190-5103 [1] WIRE AS  
8. 192-3795 [1] BOX AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [2] LINK  
  8T-4935 M [1] BOSS-WELD (M10X1.5X45-MM)  
  9R-2821 M [4] BOSS (M10X1.5X15-MM)  
9. 193-8552 [1] FILM-IDENTIFICATION (MAIN CIRCUIT BREAKER)  
10. 193-8557 [1] FILM-IDENTIFICATION (ALTERNATOR CIRCUIT BREAKER)  
11. 193-8571 [1] PLATE  
12. 201-3399 [1] WIRE AS  
13. 130-5300 [3] CLIP  
14. 144-2257 [1] PLATE  
16. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
18. 4B-4274 [12] WASHER (5.5X13X1.2-MM THK)  
19. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
20. 5M-6668 [8] SCREW-MACHINE (8-32X0.75-IN)  
21. 6T-3643 [1] CIRCUIT BREAKER AS (15-AMPERE)(ENGINE ECM)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
22. 6T-3644 [1] CIRCUIT BREAKER AS (20-AMPERE)(HOOD TILT ACTUATOR)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
23. 6V-8225 M [8] NUT (M6X1-THD)  
24. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4133 M [3] NUT (M10X1.5-THD)  
26. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
27. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 200-8577 [1] CIRCUIT BREAKER AS (20-AMPERE)(UNSWITCHED POWER TO CAB)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
29. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
29A. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
    (EACH INCLUDES)
  0S-1570 [2] BOLT (1/4-28X0.625-IN)  
  1H-3244 [2] LOCKWASHER  
  7X-3182 [2] BOLT (1/4-28X0.5-IN)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800258
 

180-0156: SENSOR & MTG GP-LIFT POSITION

180-0156 SENSOR & MTG GP-LIFT POSITION
S/N AYL1-UP
PART OF 250-3728 HYDRAULIC AR-MACHINE, 265-7159 LOGGING AR, 192-3981, 224-9882, 224-9883 MONITOR AR-PAYLOAD
i01482819 SEBP3280
1800156 SENSOR & MTG GP-LIFT POSITION Parts scheme 1800156 SENSOR & MTG GP-LIFT POSITION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-2743 [3] SPACER (12X20X9-MM THK)  
2. 166-0599 [1] ROD  
3. 169-0417 Y [1] SENSOR GP-POSITION (LIFT)  
4. 179-7000 [1] ARM  
5. 199-4064 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 214-3616 [1] PLATE  
7. 214-3617 [1] PLATE  
8. 130-5300 [1] CLIP  
9. 160-8500 M [2] NUT (M8X1.25-THD)  
10. 5C-7261 M [5] NUT (M8X1.25-THD)  
11. 7X-0818 M [5] BOLT (M8X1.25X45-MM)  
12. 7X-7662 [2] ROD END  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [3] NUT (M10X1.5-THD)  
15. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
16. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
18. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
19. 8T-4971 M [2] BOLT (M6X1X30-MM)  
20. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800259
 

180-0157: SENSOR & MTG GP-TILT POSITION

180-0157 SENSOR & MTG GP-TILT POSITION
S/N AYL1-UP
PART OF 250-3728 HYDRAULIC AR-MACHINE, 265-7159 LOGGING AR
i01482731 SEBP3280
1800157 SENSOR & MTG GP-TILT POSITION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-7662 [2] ROD END  
2. 130-5300 [1] CLIP  
3. 169-0417 Y [1] SENSOR GP-POSITION (TILT)  
4. 208-3908 [1] COVER  
5. 210-5682 [1] ARM AS  
6. 210-5683 [1] COVER AS  
7. 213-0364 [1] BRACKET AS  
8. 214-3616 [1] PLATE  
9. 214-3617 [1] PLATE  
10. 160-8500 M [2] NUT (M8X1.25-THD)  
11. 4D-7794 [1] CLIP  
12. 5C-7261 M [5] NUT (M8X1.25-THD)  
13. 7X-0818 M [5] BOLT (M8X1.25X45-MM)  
14. 7X-7729 [4] WASHER (11X25X3-MM THK)  
15. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
17. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
18. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
19. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
20. 8T-4224 [11] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4971 M [2] BOLT (M6X1X30-MM)  
22. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G II :

LIGHTING GP-ROADING
215-1888 LIGHTING GP-ROADING
LIGHTING GP-ROADING
215-1888 LIGHTING GP-ROADING
LIGHTING GP-ROADING
201-1728 LIGHTING GP-ROADING
LIGHTING GP-ROADING
201-1728 LIGHTING GP-ROADING
LIGHTING GP-FLOOD & SIGNAL
232-3325 LIGHTING GP-FLOOD & SIGNAL
LIGHTING GP-FLOOD & SIGNAL
206-7958 LIGHTING GP-FLOOD & SIGNAL
LIGHTING GP-FLOOD
232-7783 LIGHTING GP-FLOOD
LIGHTING GP-FLOOD
194-4204 LIGHTING GP-FLOOD
LIGHTING GP-WARNING BEACON
150-3918 LIGHTING GP-WARNING BEACON
LIGHTING GP-WARNING BEACON
200-0934 LIGHTING GP-WARNING BEACON
LIGHTING GP-WARNING BEACON
253-3938 LIGHTING GP-WARNING BEACON
MOUNTING GP-PRESSURE SENSOR
126-7714 MOUNTING GP-PRESSURE SENSOR
MOUNTING GP-PRESSURE SENSOR
224-5799 MOUNTING GP-PRESSURE SENSOR
MOUNTING GP-PRESSURE SENSOR
224-5800 MOUNTING GP-PRESSURE SENSOR
PANEL GP-CIRCUIT BREAKER
190-5098 PANEL GP-CIRCUIT BREAKER
SENSOR & MTG GP-LIFT POSITION
180-0156 SENSOR & MTG GP-LIFT POSITION

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.