AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-0738 GEAR GP-BEVEL & PINION S/N AYL1-UP PART OF 112-0768, 126-7843, 138-3122, 214-9398, 214-9402 AXLE AR-FIXED 950G II


POWER TRAIN
DIFFERENTIAL & BEVEL GEAR GP
GEAR GP
AXLE GP

WHEEL LOADER 950G II WHEEL LOADER AYL
 950G II Wheel Loader AYL00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3280 950G II AYL   (1999)

POWER TRAIN

DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
137-1392 DIFFERENTIAL GP
DIFFERENTIAL GP-LIMITED SLIP
103-2007 DIFFERENTIAL GP-LIMITED SLIP
DIFFERENTIAL GP-LIMITED SLIP
144-4465 DIFFERENTIAL GP-LIMITED SLIP
DIFFERENTIAL GP-LIMITED SLIP
372-4788 DIFFERENTIAL GP-LIMITED SLIP
DIFFERENTIAL GP-NOSPIN
128-0745 DIFFERENTIAL GP-NOSPIN
DIFFERENTIAL GP-NOSPIN
8R-9833 DIFFERENTIAL GP-NOSPIN
GEAR GP-BEVEL & PINION
112-0738 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
157-0340 GEAR GP-BEVEL & PINION
 

#SEBP32800390
 

112-0738: GEAR GP-BEVEL & PINION

112-0738 GEAR GP-BEVEL & PINION
S/N AYL1-UP
PART OF 112-0768, 126-7843, 138-3122, 214-9398, 214-9402 AXLE AR-FIXED
i00753809 SEBP3280
1120738 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-1913 [1] SLEEVE AS  
2. 030-0060 [1] CUP-BEARING  
3. 030-0061 [1] CONE-BEARING  
4. 4E-3897 [2] LOCK  
5. 4E-3896 M [2] BOLT (M6X1X14-MM)  
6. 4E-4031 [2] PIN  
7. 1J-4757 [1] CONE-BEARING  
8. 1J-2860 [1] CUP-BEARING  
9. 2D-9455 [1] CONE-BEARING  
10. 2D-9454 [1] CUP-BEARING  
11. 6W-1638 [1] WASHER (71X95X5-MM THK)  
12. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
13. 445-9403 [1] YOKE  
14. 9V-2429 [1] RETAINER  
15. 9X-2619 [4] PIN-SPRING  
16. 9X-2620 [4] PIN-SPRING  
17. 6Y-2539 [1] CONE-BEARING  
18. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
19. 9U-1912 [1] SLEEVE AS  
20. 6Y-2540 [1] CUP-BEARING  
21. 2H-3088 [1] SEAL-O-RING  
22. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
23. 8R-9215 [1] GEAR-BEVEL (44-TEETH)  
24. 112-0742 [1] SHAFT-BEVEL PINION  
25. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
26. 9X-6493 M [20] BOLT (M16X2X180-MM)  
  M   METRIC PART
 

#SEBP32800391
 

112-0778: GEAR GP-BEVEL & PINION

112-0778 GEAR GP-BEVEL & PINION
S/N AYL1-UP
PART OF 112-0723, 126-7845, 126-7846 AXLE AR-OSCILLATING
Type 1
i00727566 SEBP3280
1120778 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-1913 [1] SLEEVE AS  
2. 030-0060 [1] CUP-BEARING  
3. 030-0061 [1] CONE-BEARING  
4. 4E-3897 [2] LOCK  
5. 4E-3896 M [2] BOLT (M6X1X14-MM)  
6. 4E-4031 [2] PIN  
7. 1J-4757 [1] CONE-BEARING  
8. 1J-2860 [1] CUP-BEARING  
9. 2D-9455 [1] CONE-BEARING  
10. 2D-9454 [1] CUP-BEARING  
11. 6W-1638 [1] WASHER (71X95X5-MM THK)  
12. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
13. 156-1151 [1] YOKE AS  
14. 7V-3791 [1] GUARD  
15. 9X-2619 [4] PIN-SPRING  
16. 9X-2620 [4] PIN-SPRING  
17. 6Y-2539 [1] CONE-BEARING  
18. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
19. 9U-1912 [1] SLEEVE AS  
20. 6Y-2540 [1] CUP-BEARING  
21. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
22. 8R-9215 [1] GEAR-BEVEL (44-TEETH)  
23. 9C-5853 [1] SHAFT-PINION  
24. 9X-6493 M [20] BOLT (M16X2X180-MM)  
  M   METRIC PART
 

#SEBP32800392
 

112-0778: GEAR GP-BEVEL & PINION

112-0778 GEAR GP-BEVEL & PINION
S/N AYL1-UP
PART OF 112-0723, 126-7845, 126-7846 AXLE AR-OSCILLATING
Type 2
i07560327 SEBP3280
1120778 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-3896 M [2] BOLT (M6X1X14-MM)  
2. 4E-3897 [2] LOCK  
3. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
4. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
5. 6W-1638 [1] WASHER (71X95X5-MM THK)  
6. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
7. 9U-1912 [1] SLEEVE AS  
  6Y-2540 [1] CUP-BEARING  
8. 9U-1913 [1] SLEEVE AS  
  030-0060 [1] CUP-BEARING  
9. 9X-6493 M [20] BOLT (M16X2X180-MM)  
10. 112-0779 [1] GEAR SET-BEVEL  
11. 422-9551 C [1] YOKE AS  
  1H-7339 [1] SEAL-O-RING  
  8J-1580 [1] RING-RETAINING  
12. 030-0061 [1] CONE-BEARING  
13. 1J-2860 [1] CUP-BEARING  
14. 1J-4757 [1] CONE-BEARING  
15. 2D-9454 [1] CUP-BEARING  
16. 2D-9455 [1] CONE-BEARING  
17. 4E-4031 [2] PIN  
18. 6Y-2539 [1] CONE-BEARING  
19. 9X-2619 [4] PIN-SPRING  
20. 9X-2620 [4] PIN-SPRING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP32800393
 

157-0340: GEAR GP-BEVEL & PINION

157-0340 GEAR GP-BEVEL & PINION
S/N AYL1-UP
PART OF 214-6161 AXLE AR-FIXED
i01831284 SEBP3280
1570340 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-1913 [1] SLEEVE AS  
1A. 030-0060 [1] CUP-BEARING  
2. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
3. 030-0061 [1] CONE-BEARING  
4. 4E-3897 [2] LOCK  
5. 4E-3896 M [2] BOLT (M6X1X14-MM)  
6. 4E-4031 [2] PIN  
7. 1J-4757 [1] CONE-BEARING  
8. 1J-2860 [1] CUP-BEARING  
9. 2D-9455 [1] CONE-BEARING  
10. 2D-9454 [1] CUP-BEARING  
11. 6W-1638 [1] WASHER (71X95X5-MM THK)  
12. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
13. 446-8175 [1] YOKE  
14. 112-0739 [1] GEAR SET-BEVEL  
14A. 8R-9215 [1] GEAR-BEVEL (44-TEETH)  
15. 9X-2619 [4] PIN-SPRING  
16. 9X-2620 [4] PIN-SPRING  
17. 6Y-2539 [1] CONE-BEARING  
18. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
19. 9U-1912 [1] SLEEVE AS  
19A. 6Y-2540 [1] CUP-BEARING  
20. 9X-6493 M [20] BOLT (M16X2X180-MM)  
21. 2H-3088 [1] SEAL-O-RING  
22. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
23. 9V-2429 [1] RETAINER  
  M   METRIC PART
 

#SEBP32800394
 

114-8947: GEAR GP-OUTPUT TRANSFER

114-8947 GEAR GP-OUTPUT TRANSFER
S/N D3B1-99999; D3F1-UP; CGR1-99999
PART OF 190-3776, 190-3777, 199-2758 TRANSMISSION AR
i01805708 SEBP3280
1148947 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-5052 C [1] CASE-TRANSFER  
2. 188-5046 BC [1] SHIM PACK (INCLUDES 13-SHIMS)  
3. 6V-4248 CM [27] BOLT (M10X1.5X25-MM)  
4. 368-5063 [1] SCREEN GP-MAGNETIC  
5. 8M-7160 [3] MAGNET  
6. 8P-3251 [1] COVER AS  
7. 7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
8. 7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
9. 7S-8554 [1] SEAL-O-RING  
10. 125-3375 [1] GEAR-TRANSFER (68-TEETH)  
11. 155-6648 [2] CONE-BEARING  
12. 155-6647 [2] CUP-BEARING  
13. 265-9465 [1] SHAFT-OUTPUT  
14. 2P-8987 [2] CONE-BEARING  
15. 2P-8986 [2] CUP-BEARING  
16. 115-0527 [1] CAGE-BEARING  
17. 5F-3144 [1] SEAL-O-RING  
18. 8T-0358 M [2] BOLT (M16X2X90-MM)  
19. 129-0987 [1] DRAIN AS  
20. 6J-2419 [1] SEAL-O-RING  
21. 8F-0212 [1] SEAL-O-RING  
22. 175-4946 [1] PLUG-DRAIN  
23. 9G-6257 [2] GASKET-COVER  
24. 6V-6317 M [12] BOLT (M10X1.5X20-MM)  
25. 3J-0634 [1] SEAL-O-RING  
26. 223-3924 [1] CAGE-BEARING  
27. 6I-8497 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
28. 9X-7743 [2] SEAL-LIP TYPE  
29. 115-1326 [1] YOKE AS  
30. 7S-8158 [1] GUARD  
31. 2H-3088 [2] SEAL-O-RING  
32. 2M-0849 C [1] WASHER-HARD (13.5X25.5X5-MM THK)  
33. 188-5149 C [1] CAGE AS-BEARING  
34. 8T-5414 M [4] STUD (M12X1.75X50-MM)  
35. 2N-7006 [1] COVER  
36. 2N-7007 B [1] GASKET  
37. 6V-8149 M [4] NUT (M12X1.75-THD)  
38. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.1)  
38A. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.2)  
39. 200-1315 CY [1] BRAKE GP-PARKING  
40. 6V-8201 M [4] BOLT-SOCKET HEAD (M16X2X45-MM)  
41. 103-1712 [1] DRUM  
42. 7X-0622 [8] WASHER (13X24X2.5-MM THK)  
43. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
44. 129-6329 [1] LEVER  
45. 191-1830 C [1] YOKE  
46. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
47. 115-4783 [1] TUBE AS  
48. 2H-3927 [1] SEAL-O-RING  
49. 1H-9696 [1] SEAL-O-RING  
50. 110-7453 [1] TUBE AS  
51. 3H-2652 [1] SEAL-O-RING  
52. 9G-5127 [1] BREATHER (ATMOSPHERIC)(TRANSMISSION)  
53. 6V-8197 CM [1] BOLT (M12X1.75X40-MM)  
54. 6V-5696 CM [1] BOLT (M12X1.75X80-MM)  
55. 6V-1820 CM [12] BOLT (M10X1.5X30-MM)  
56. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
57. 1H-8720 [1] SEAL-O-RING  
58. 6T-7061 [1] EYE-LIFTING  
59. 4S-8598 [1] SCREEN-SUCTION  
60. 8H-7521 [1] SEAL-O-RING  
61. 8T-0375 M [1] BOLT (M16X2X45-MM)  
62. 5F-8000 [1] SEAL-O-RING  
63. 125-3376 [1] GEAR-TRANSFER (74-TEETH)  
64. 9G-6258 [2] COVER-TRANSMISSION  
65. 265-3930 [2] RETAINER  
66. 3J-1907 [1] SEAL-O-RING  
67. 6V-0852 [1] CAP-DUST  
68. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
69. 9H-1024 [4] WASHER-HARD (17X30X6-MM THK)  
70. 6V-5686 M [4] BOLT (M16X2X50-MM)  
71. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
72. 1V-6341 [2] SEAL  
73. 3E-4353 C [10] WASHER-HARD (11X25X3-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800395
 

114-8947: GEAR GP-OUTPUT TRANSFER

114-8947 GEAR GP-OUTPUT TRANSFER
S/N D3B1-99999; D3F1-UP; CGR1-99999
PART OF 190-3776, 190-3777, 199-2758 TRANSMISSION AR
i01805727 SEBP3280
1148947 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-5052 [1] CASE-TRANSFER  
2. 188-5046 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
3. 6V-4248 M [27] BOLT (M10X1.5X25-MM)  
4. 4S-8603 [1] SCREEN GP-MAGNETIC  
6. 8P-3251 [1] COVER AS  
7. 7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
8. 7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
9. 7S-8554 [1] SEAL-O-RING  
10. 125-3375 [1] GEAR-TRANSFER (68-TEETH)  
11. 5P-0891 [2] CONE-BEARING  
12. 5P-0890 [2] CUP-BEARING  
13. 157-5547 [1] SHAFT-OUTPUT  
14. 2P-8987 [2] CONE-BEARING  
15. 2P-8986 [2] CUP-BEARING  
16. 115-0527 [1] CAGE-BEARING  
17. 5F-3144 [1] SEAL-O-RING  
18. 8T-0358 M [2] BOLT (M16X2X90-MM)  
19. 138-1509 C [1] DRAIN GP-ECOLOGY (POWER TRAIN OIL)  
19A. 7M-8485 [1] SEAL-O-RING  
19B. 8F-0212 [1] SEAL-O-RING  
  138-1510 [1] PLUG  
23. 9G-6257 [2] GASKET-COVER  
24. 6V-6317 M [12] BOLT (M10X1.5X20-MM)  
25. 3J-0634 [1] SEAL-O-RING  
26. 6I-8496 [1] CAGE-BEARING  
27. 6I-8497 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
28. 9X-7743 [2] SEAL-LIP TYPE  
29. 115-1326 [1] YOKE AS  
30. 7S-8158 [1] GUARD  
31. 2H-3088 [2] SEAL-O-RING  
32. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
33. 188-5149 [1] CAGE AS-BEARING  
34. 8T-5414 M [4] STUD (M12X1.75X50-MM)  
35. 2N-7006 [1] COVER  
36. 2N-7007 B [1] GASKET  
37. 6V-8149 M [4] NUT (M12X1.75-THD)  
38. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.1)  
38A. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.2)  
39. 200-1315 Y [1] BRAKE GP-PARKING  
40. 6V-8201 M [4] BOLT-SOCKET HEAD (M16X2X45-MM)  
41. 103-1712 [1] DRUM  
42. 7X-0622 [8] WASHER (13X24X2.5-MM THK)  
43. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
44. 129-6329 [1] LEVER  
45. 191-1830 [1] YOKE  
46. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
47. 115-4783 [1] TUBE AS  
48. 2H-3927 [1] SEAL-O-RING  
49. 1H-9696 [1] SEAL-O-RING  
50. 110-7453 [1] TUBE AS  
51. 3H-2652 [1] SEAL-O-RING  
52. 9G-5127 [1] BREATHER (ATMOSPHERIC)(TRANSMISSION)  
53. 6V-8197 M [1] BOLT (M12X1.75X40-MM)  
54. 6V-5696 M [1] BOLT (M12X1.75X80-MM)  
55. 6V-1820 CM [10] BOLT (M10X1.5X30-MM)  
57. 1H-8720 [1] SEAL-O-RING  
58. 6T-7061 [1] EYE-LIFTING  
59. 4S-8598 [1] SCREEN-SUCTION  
60. 8H-7521 [1] SEAL-O-RING  
61. 8T-0375 M [1] BOLT (M16X2X45-MM)  
63. 125-3376 [1] GEAR-TRANSFER (74-TEETH)  
64. 9G-6258 [2] COVER-TRANSMISSION  
65. 155-1634 [2] RETAINER  
66. 3J-1907 [1] SEAL-O-RING  
67. 6V-0852 [1] CAP-DUST  
68. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
69. 9H-1024 [4] WASHER-HARD (17X30X6-MM THK)  
70. 6V-5686 M [4] BOLT (M16X2X50-MM)  
71. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
72. 1V-6341 [2] SEAL  
73. 3E-4353 [10] WASHER-HARD (11X25X3-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800396
 

157-0955: GEAR GP-OUTPUT TRANSFER

157-0955 GEAR GP-OUTPUT TRANSFER
S/N A1A1-99999; LMP1-UP
PART OF 191-2351, 214-9075 TRANSMISSION AR
i01831020 SEBP3280
1570955 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-5052 [1] CASE-TRANSFER  
2. 6T-7061 [1] EYE-LIFTING  
3. 6V-4248 M [27] BOLT (M10X1.5X25-MM)  
4. 4S-8603 [1] SCREEN GP-MAGNETIC  
5. 4S-8598 [1] SCREEN-SUCTION  
6. 8P-3251 [1] COVER AS  
  8P-1722 [1] COVER  
6A. 7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
6B. 7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
7. 8H-7521 [1] SEAL-O-RING  
8. 8T-0375 M [1] BOLT (M16X2X45-MM)  
9. 7S-8554 [1] SEAL-O-RING  
10. 125-3375 [1] GEAR-TRANSFER (68-TEETH)  
11. 5P-0891 [2] CONE-BEARING  
12. 5P-0890 [2] CUP-BEARING  
13. 157-5547 [1] SHAFT-OUTPUT  
14. 2P-8987 [2] CONE-BEARING  
15. 2P-8986 [2] CUP-BEARING  
16. 115-0527 [1] CAGE-BEARING  
17. 5F-3144 [1] SEAL-O-RING  
18. 8T-0358 M [2] BOLT (M16X2X90-MM)  
19. 138-1509 C [1] DRAIN GP-ECOLOGY (POWER TRAIN OIL)  
19A. 8F-0212 [1] SEAL-O-RING  
19B. 7M-8485 [1] SEAL-O-RING  
  138-1510 [1] PLUG  
21. 125-3376 [1] GEAR-TRANSFER (74-TEETH)  
22. 9G-6258 [2] COVER-TRANSMISSION  
23. 9G-6257 [2] GASKET-COVER  
24. 6V-6317 M [12] BOLT (M10X1.5X20-MM)  
25. 3J-0634 [1] SEAL-O-RING  
26. 6I-8496 [1] CAGE-BEARING  
27. 6I-8497 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
28. 9X-7743 [2] SEAL-LIP TYPE  
29. 115-1326 [1] YOKE AS  
29A. 7S-8158 [1] GUARD  
30. 155-1634 [2] RETAINER  
31. 2H-3088 [2] SEAL-O-RING  
32. 3E-4353 [10] WASHER-HARD (11X25X3-MM THK)  
33. 188-5149 [1] CAGE AS-BEARING  
33A. 8T-5414 M [4] STUD (M12X1.75X50-MM)  
34. 188-5046 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
35. 2N-7006 [1] COVER  
36. 2N-7007 [1] GASKET  
37. 6V-8149 M [4] NUT (M12X1.75-THD)  
38. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.1)  
38A. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.2)  
39. 200-1315 Y [1] BRAKE GP-PARKING  
40. 6V-5686 M [4] BOLT (M16X2X50-MM)  
41. 155-5609 [1] DRUM  
42. 7X-0622 [8] WASHER (13X24X2.5-MM THK)  
43. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
44. 129-6329 [1] LEVER  
45. 191-1831 [1] YOKE  
46. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
47. 115-4783 [1] TUBE AS  
48. 2H-3927 [1] SEAL-O-RING  
49. 1H-9696 [1] SEAL-O-RING  
50. 110-7453 [1] TUBE AS  
51. 3H-2652 [1] SEAL-O-RING  
52. 9G-5127 [1] BREATHER (ATMOSPHERIC)(TRANSMISSION)  
53. 6V-8197 M [1] BOLT (M12X1.75X40-MM)  
54. 6V-5696 M [1] BOLT (M12X1.75X80-MM)  
55. 6V-1820 M [10] BOLT (M10X1.5X30-MM)  
57. 1H-8720 [1] SEAL-O-RING  
59. 6V-0852 [1] CAP-DUST  
60. 3J-1907 [1] SEAL-O-RING  
61. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
62. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
63. 1V-6341 [2] SEAL  
64. 9H-1024 [4] WASHER-HARD (17X30X6-MM THK)  
65. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800397
 

112-0769: HOUSING GP-FIXED AXLE

112-0769 HOUSING GP-FIXED AXLE
S/N AYL1-UP
PART OF 112-0768, 126-7843, 138-3122 AXLE AR-FIXED
i01067032 SEBP3280
1120769 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5315 [2] SEAL GP-DUO-CONE  
2. 6Y-2538 [2] CONE-BEARING  
3. 2P-1373 [2] CUP-BEARING  
4. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
5. 5H-3701 [2] SCREW-PURGE  
6. 143-4907 [1] HOUSING AS-FIXED  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
7. 1U-8846 B SEALANT-GASKET (28ML)  
8. 9C-8421 [2] SHAFT-AXLE  
9. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
10. 9X-2027 [6] WASHER (11X18X2-MM THK)  
11. 6V-5686 M [10] BOLT (M16X2X50-MM)  
12. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
13. 8T-0336 [1] FITTING-PRESSURE RELIEF  
14. 4H-6520 [1] SEAL-O-RING  
15. 9C-6021 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
16. 9C-9193 [1] HOUSING-PINION  
17. 4E-8534 [1] RETAINER-SEAL  
18. 123-4003 [1] SEAL-LIP TYPE  
19. 9C-6041 [3] DOWEL  
20. 9X-6493 M [24] BOLT (M16X2X180-MM)  
21. 127-5092 [2] HOUSING-AXLE  
22. 5P-4484 [1] PLUG-MAGNETIC  
23. 3B-0551 [1] PLUG-PIPE  
24. 6C-5304 M [24] BOLT (M16X2X110-MM)  
25. 7M-8485 [3] SEAL-O-RING  
26. 9S-4181 [2] PLUG (1-5/16-12-THD)  
27. 5P-3119 [2] RING-RETAINING  
28. 9C-8419 [2] NUT-BEARING  
29. 8B-6342 [2] CONE-BEARING  
30. 8B-6343 [2] CUP-BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP32800398
 

112-0769: HOUSING GP-FIXED AXLE

112-0769 HOUSING GP-FIXED AXLE
S/N AYL1-453
PART OF 112-0768, 138-3122 AXLE AR-FIXED
i01740192 SEBP3280
1120769 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5315 [2] SEAL GP-DUO-CONE  
2. 6Y-2538 [2] CONE-BEARING  
3. 2P-1373 [2] CUP-BEARING  
4. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
5. 5H-3701 [2] SCREW-PURGE  
6. 192-9121 [1] HOUSING AS  
  095-0673 CM [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
7. 1U-8846 B SEALANT-GASKET (28ML)  
8. 9C-8421 [2] SHAFT-AXLE  
9. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
10. 9X-2027 [6] WASHER (11X18X2-MM THK)  
11. 6V-5686 M [10] BOLT (M16X2X50-MM)  
12. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
13. 8T-0336 [1] FITTING-PRESSURE RELIEF  
14. 4H-6520 [1] SEAL-O-RING  
15. 9C-6021 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
16. 9C-9193 [1] HOUSING-PINION  
17. 4E-8534 [1] RETAINER-SEAL  
18. 123-4003 [1] SEAL-LIP TYPE  
19. 9C-6041 [3] DOWEL  
20. 9X-6493 M [24] BOLT (M16X2X180-MM)  
21. 127-5092 [2] HOUSING-AXLE  
22. 5P-4484 [1] PLUG-MAGNETIC  
23. 3B-0551 [1] PLUG-PIPE  
24. 6C-5304 M [24] BOLT (M16X2X110-MM)  
25. 7M-8485 C [4] SEAL-O-RING  
26. 9S-4181 [2] PLUG (1-5/16-12-THD)  
27. 5P-3119 [2] RING-RETAINING  
28. 9C-8419 [2] NUT-BEARING  
29. 8B-6342 [2] CONE-BEARING  
30. 8B-6343 [2] CUP-BEARING  
31. 9S-9334 C [1] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP32800399
 

214-6156: HOUSING GP-FIXED AXLE

214-6156 HOUSING GP-FIXED AXLE
S/N AYL454-UP
PART OF 214-6161, 214-9398, 214-9402 AXLE AR-FIXED
i01789427 SEBP3280
2146156 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-8534 [1] RETAINER-SEAL  
2. 5H-3701 [2] SCREW-PURGE  
3. 8T-0336 [1] FITTING-PRESSURE RELIEF  
4. 226-2684 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
5. 9C-8421 [2] SHAFT-AXLE  
6. 9C-9194 [1] HOUSING-PINION  
7. 9G-5315 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  2M-0344 [2] RING-SEALING  
10. 123-4003 [1] SEAL-LIP TYPE  
11. 192-9121 [1] HOUSING AS  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
12. 372-0715 [2] HOUSING-AXLE  
13. 2P-1373 [2] CUP-BEARING  
14. 3B-0551 [1] PLUG-PIPE  
15. 4H-6520 [1] SEAL-O-RING  
16. 5P-3119 [2] RING-RETAINING  
17. 5P-4484 [1] PLUG-MAGNETIC  
18. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
19. 6V-5686 M [10] BOLT (M16X2X50-MM)  
20. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
21. 6Y-2538 [2] CONE-BEARING  
22. 7M-8485 [4] SEAL-O-RING  
23. 8B-6342 [2] CONE-BEARING  
24. 8B-6343 [2] CUP-BEARING  
25. 8T-0649 M [24] BOLT (M16X2X110-MM)  
26. 8T-5002 M [24] BOLT (M16X2X180-MM)  
27. 9C-6041 [3] DOWEL  
28. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (AXLE)  
29. 9C-8419 [2] NUT-BEARING  
30. 9S-4181 [2] PLUG (1-5/16-12-THD)  
31. 9S-9334 [1] PLUG  
32. 9X-2027 [6] WASHER (11X18X2-MM THK)  
33. 1U-8846 B SEALANT-GASKET (62-ML)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Caterpillar Parts SIS Catalog 950G II :

FILTER GP-OIL
249-1750 FILTER GP-OIL
FILTER GP-OIL
197-1993 FILTER GP-OIL
FILTER & LINES GP-TRANSMISSION
199-4392 FILTER & LINES GP-TRANSMISSION
FILTER & LINES GP-TRANSMISSION
199-4392 FILTER & LINES GP-TRANSMISSION
FILLER GP-POWER TRAIN OIL
126-7700 FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
126-7700 FILLER GP-POWER TRAIN OIL
DRAIN GP-ECOLOGY
198-7248 DRAIN GP-ECOLOGY
DRAIN GP-ECOLOGY
143-4953 DRAIN GP-ECOLOGY
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
157-0340 GEAR GP-BEVEL & PINION
GEAR GP-OUTPUT TRANSFER
114-8947 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
114-8947 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
157-0955 GEAR GP-OUTPUT TRANSFER
HOUSING GP-FIXED AXLE
112-0769 HOUSING GP-FIXED AXLE
HOUSING GP-FIXED AXLE
112-0769 HOUSING GP-FIXED AXLE

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.