AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

155-5605 UNIVERSAL JOINT GP S/N AYL1-UP PART OF 155-5604 SHAFT GP-DRIVE 950G II WHEEL LOADER


POWER TRAIN
SHAFT GP
VALVE GP-MODULATING
VALVE GP-RELIEF
WHEEL GP
FRAME AND BODY
GUARD GP
FRAME GP
CONVERSION GP

WHEEL LOADER 950G II WHEEL LOADER AYL
 950G II Wheel Loader AYL00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3280 950G II AYL   (1999)

POWER TRAIN

SHAFT GP
SHAFT GP-DRIVE
115-1648 SHAFT GP-DRIVE
SHAFT GP-DRIVE
115-1652 SHAFT GP-DRIVE
SHAFT GP-DRIVE
155-5600 SHAFT GP-DRIVE
SHAFT GP-DRIVE
155-5604 SHAFT GP-DRIVE
SLIP JOINT GP
115-1651 SLIP JOINT GP
SLIP JOINT GP
155-5607 SLIP JOINT GP
UNIVERSAL JOINT GP
115-1650 UNIVERSAL JOINT GP
UNIVERSAL JOINT GP
115-1654 UNIVERSAL JOINT GP
UNIVERSAL JOINT GP
155-5605 UNIVERSAL JOINT GP
 

#SEBP32800480
 

155-5605: UNIVERSAL JOINT GP

155-5605 UNIVERSAL JOINT GP
S/N AYL1-UP
PART OF 155-5604 SHAFT GP-DRIVE
i01832886 SEBP3280
1555605 UNIVERSAL JOINT GP Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-8810 [1] SPIDER & BEARING GP  
2. 9C-9159 [2] PLATE  
3. 027-1287 [2] FITTING-GREASE  
4. 153-1185 M [4] BOLT (M10X1.25X16-MM)  
  M   METRIC PART
 

#SEBP32800481
 

160-8408: VALVE GP-MODULATING

160-8408 VALVE GP-MODULATING -TRANSMISSION CLUTCH-TRANSMISSION CLUTCH
S/N A1A1-99999; D3B1-99999; D3F1-UP; LMP1-UP; CGR1-99999
24 VOLT DC
PART OF 190-3784 CONTROL GP-TRANSMISSION HYD
i01222616 SEBP3280
1608408 VALVE GP-MODULATING Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
2. 145-1144 [1] COIL AS  
3. 167-9524 [1] NUT-SELF LOCKING (1/2-28-THD)  
4. Z VALVE AS  
5. 164-2108 [1] WASHER (13.03X25.4X2.38-MM THK)  
6. 3J-1907 [1] SEAL-O-RING  
  Z   NOT SERVICED SEPARATELY
 

#SEBP32800482
 

202-8933: VALVE GP-RELIEF

202-8933 VALVE GP-RELIEF -TRANSMISSION HYDRAULIC CONTROL-TRANSMISSION HYDRAULIC CONTROL
S/N A1A1-99999; D3B1-99999; D3F1-UP; LMP1-UP; CGR1-99999
PART OF 190-3784 CONTROL GP-TRANSMISSION HYD
i01491680 SEBP3280
2028933 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-4663 [1] SEAL-O-RING  
2. 164-5567 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
4. 6V-0852 [2] CAP-DUST  
5. 241-6206 [1] PLUG  
6. 2M-9780 [1] SEAL-O-RING  
7. 202-2005 [1] COVER  
8. 9M-2110 [1] COVER-ADJUSTMENT  
9. 9S-8001 [3] PLUG  
10. 4J-7533 [3] SEAL-O-RING  
11. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
12. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
13. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
14. 8E-1143 [1] SLUG  
15. 9U-8668 [1] SPOOL AS  
  3D-8317 [1] RING-RETAINING  
  4B-9880 [1] BALL  
  4M-2381 [1] SPRING  
  8E-9893 [1] SPOOL-RELIEF  
  9U-8669 [1] RETAINER  
16. 1M-9351 [1] SPRING  
17. 2S-5835 [1] PISTON-LOAD  
18. 202-2006 [1] SCREW-ADJUSTMENT  
19. 8M-5253 [1] SEAL-O-RING  
20. 164-6874 [2] FITTING AS-ELBOW (QUICK DISCONNECT, MALE)  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  085-7356 [1] FITTING  
21. 111-3200 [1] BODY  
  M   METRIC PART
 

#SEBP32800483
 

2D-2511: VALVE GP-TIRE

2D-2511 VALVE GP-TIRE
S/N AYL1-UP
PART OF 138-2373 RIM AR, 131-2777, 206-9278, 246-1579 RIM GP-DEMOUNTABLE
i00876166 SEBP3280
2D2511 VALVE GP-TIRE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-2239 [1] VALVE AS-TIRE  
1A. 6F-3930 [1] CORE-VALVE  
1B. 9K-7951 [1] CAP-VALVE  
2. 7D-5252 [1] SPUD AS  
2A. 2D-2507 [1] SPUD  
2B. 2D-2508 [1] GROMMET  
2C. 2D-2509 [1] LOCKNUT (11/16-16-THD)  
 

#SEBP32800484
 

210-2613: ACTUATOR GP-POWER

210-2613 ACTUATOR GP-POWER
S/N AYL1-UP
PART OF 124-4240 TILT GP-HOOD
i01596177 SEBP3280
2102613 ACTUATOR GP-POWER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-1559 [1] MOUNT AS  
2. 122-4233 [1] WIPER  
3. 262-4917 [1] POST AS  
  203-6473 [1] GASKET  
4. 262-4918 [1] POWERHEAD AS  
5. 179-4324 JM [2] LOCKNUT (M5X0.8-THD)  
6. 168-2166 J [1] GASKET-MOTOR  
7. 203-6473 J [1] GASKET  
8. 205-6029 [1] MOTOR AS-ELECTRIC (HOOD TILT)  
  8N-1540 [1] PIN-CONNECTOR (12-GA TO 14-GA)  
  8N-1541 [1] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
9. 212-6854 [1] ROD END  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [4] NUT (M10X1.5-THD)  
12. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
13. 171-3716 J [1] GASKET-COVER  
   
    AVAILABLE REPAIR KIT(S):
  203-6470 J KIT-GASKET  
  J   KIT(S) MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP32800485
 

262-4914: ACTUATOR GP-POWER

262-4914 ACTUATOR GP-POWER
S/N AYL1-UP
PART OF 124-4240 TILT GP-HOOD
i02294014 SEBP3280
2624914 ACTUATOR GP-POWER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-1559 [1] MOUNT AS  
2. 122-4233 [1] WIPER  
3. 262-4917 [1] POST AS  
  203-6473 [1] GASKET  
4. 262-4918 [1] POWERHEAD AS  
5. 179-4324 JM [2] LOCKNUT (M5X0.8-THD)  
6. 168-2166 J [1] GASKET-MOTOR  
7. 203-6473 J [1] GASKET  
8. 205-6029 [1] MOTOR AS-ELECTRIC (HOOD TILT)  
  8N-1540 [1] PIN-CONNECTOR (12-GA TO 14-GA)  
  8N-1541 [1] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
9. 212-6854 [1] ROD END  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [4] NUT (M10X1.5-THD)  
12. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
13. 171-3716 J [1] GASKET-COVER  
   
    AVAILABLE REPAIR KIT(S):
  203-6470 J KIT-GASKET  
  J   KIT(S) MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP32800486
 

176-2444: BLOCK GP-AXLE OSC LIMITER

176-2444 BLOCK GP-AXLE OSC LIMITER
S/N AYL1-UP
PART OF 246-1584, 265-9525 TIRE & RIM AR
i01155132 SEBP3280
1762444 BLOCK GP-AXLE OSC LIMITER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 314-9350 [2] BLOCK  
2. 314-9351 [2] BLOCK  
 

#SEBP32800487
 

213-6481: CONVERSION AR-ROADING

213-6481 CONVERSION AR-ROADING
S/N AYL1-766
ITALY
Type 1
CANNOT BE USED WITH @@@@@250-3728@@@@@
i01616996 SEBP3280
2136481 CONVERSION AR-ROADING Parts scheme 2136481 CONVERSION AR-ROADING Parts scheme 2136481 CONVERSION AR-ROADING Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [3] STRAP-CABLE  
2. 5P-8837 [2] LOCK PIN  
3. 6C-0076 [1] CONNECTOR  
4. 6C-5712 [2] REFLECTOR (AMBER)  
5. 6C-5736 [2] REFLECTOR (RED)  
6. 6C-7159 [1] PLATE  
7. 6C-7319 [2] PLATE AS  
8. 6C-7320 [2] FILM-STRIPE (RED, WHITE)  
9. 6C-7476 [1] PLATE  
10. 6C-7485 [1] BLOCK  
11. 6C-7580 [8] COVER-WORK LIGHT  
12. 6C-7581 [1] LAMP GP-REGISTRATION PLATE (24-VOLT, 10-WATT)  
13. 6C-7589 [2] PLATE  
14. 6C-7590 [2] FILM (RED, WHITE STRIPES)  
15. 6C-7591 [2] LAMP GP  
16. 6C-7597 [1] HARNESS AS-LIGHTING (BUCKET)  
17. 6C-7607 [2] CHAIN AS  
18. 6C-7608 [2] SPRING  
19. 6C-8664 [4] SPACER  
20. 8F-0492 [2] SPACER (0.531X1.125X0.625-IN THK)  
21. 9X-8937 [4] TACK  
22. 107-8465 [1] WIRE AS  
23. 124-2541 [1] GUARD AS  
24. 124-3112 [2] BRACKET  
25. 124-4131 [1] FILM-REFLECTOR (RED, WHITE STRIPES)  
26. 139-3058 [1] PIN GP-LIFT ARM  
  6C-7460 [2] PIN  
27. 148-9025 [1] BRACKET (LH)  
28. 148-9026 [1] BRACKET (RH)  
29. 150-3918 Y [1] LIGHTING GP-WARNING BEACON  
30. 158-1202 [2] REFLECTOR (RED)  
31. 159-7342 [1] PLATE-INFORMATION (MAXIMUM WEIGHT)  
32. 161-2473 [1] FILM-REFLECTOR (RED, WHITE STRIPES, LH)  
33. 161-2474 [1] FILM-REFLECTOR (RED, WHITE STRIPES, RH)  
34. 163-8394 [1] BRACKET AS  
35. 163-8396 [1] BRACKET AS  
36. 198-9096 [1] FILM-IDENTIFICATION (BUCKET, BRACKET)  
37. 198-9098 [2] FILM-WARNING (KEEP AWAY FROM MACHINE)  
38. 213-3390 [1] BRACKET  
39. 213-3391 [1] SHEET  
40. 213-5302 [1] HARNESS AS-LIGHTING (REGISTRATION PLATE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
41. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
42. 198-9099 [2] FILM-INFORMATION (REFLECTOR, 40-KM)  
43. 3P-9554 [2] GROMMET  
44. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
45. 5C-2890 M [4] NUT (M6X1-THD)  
46. 5C-8312 M [6] NUT (M4X0.7-THD)  
47. 6V-7697 [2] SCREW-MACHINE (8-32X1.25-IN)  
48. 6V-9672 M [6] SCREW-MACHINE (M4X0.7X16-MM)  
49. 8M-2772 [1] CLIP (LOOP)  
50. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
51. 8T-4133 M [4] NUT (M10X1.5-THD)  
52. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
53. 8T-4138 M [4] BOLT (M6X1X20-MM)  
54. 8T-4182 M [6] BOLT (M10X1.5X45-MM)  
55. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
56. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
57. 8T-4244 M [2] NUT (M12X1.75-THD)  
58. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
59. 9L-6074 [1] GROMMET  
60. 9X-6165 [2] WASHER (6.5X22X2.5-MM THK)  
61. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
62. 7X-7877 E STRIP-EDGE (200 CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800488
 

213-6481: CONVERSION AR-ROADING

213-6481 CONVERSION AR-ROADING
S/N AYL1-766
ITALY
Type 2
CANNOT BE USED WITH @@@@@250-3728@@@@@
i01663081 SEBP3280
2136481 CONVERSION AR-ROADING Parts scheme 2136481 CONVERSION AR-ROADING Parts scheme 2136481 CONVERSION AR-ROADING Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [3] STRAP-CABLE  
2. 5P-8837 [2] LOCK PIN  
3. 6C-0076 [1] CONNECTOR  
4. 6C-5712 [2] REFLECTOR (AMBER)  
5. 6C-5736 [2] REFLECTOR (RED)  
6. 6C-7159 [1] PLATE  
7. 6C-7319 [2] PLATE AS  
8. 6C-7320 [2] FILM-STRIPE (RED, WHITE)  
9. 6C-7476 [1] PLATE  
10. 6C-7485 [1] BLOCK  
11. 6C-7580 [8] COVER-WORK LIGHT  
12. 6C-7581 [1] LAMP GP-REGISTRATION PLATE (24-VOLT, 10-WATT)  
13. 6C-7589 [2] PLATE  
14. 6C-7590 [2] FILM (RED, WHITE STRIPES)  
15. 6C-7591 [2] LAMP GP  
16. 6C-7597 [1] HARNESS AS-LIGHTING (BUCKET)  
17. 6C-7607 [2] CHAIN AS  
18. 6C-7608 [2] SPRING  
19. 6C-8664 [4] SPACER  
20. 8F-0492 [2] SPACER (0.531X1.125X0.625-IN THK)  
21. 9X-8937 [4] TACK  
22. 107-8465 [1] WIRE AS  
23. 124-2541 [1] GUARD AS  
24. 124-3112 [2] BRACKET  
25. 124-4131 [1] FILM-REFLECTOR (RED, WHITE STRIPES)  
26. 139-3058 [1] PIN GP-LIFT ARM  
  6C-7460 [2] PIN  
27. 148-9025 [1] BRACKET (LH)  
28. 148-9026 [1] BRACKET (RH)  
29. 200-0934 CY [1] LIGHTING GP-WARNING BEACON  
30. 158-1202 [2] REFLECTOR (RED)  
31. 159-7342 [1] PLATE-INFORMATION (MAXIMUM WEIGHT)  
32. 161-2473 [1] FILM-REFLECTOR (RED, WHITE STRIPES, LH)  
33. 161-2474 [1] FILM-REFLECTOR (RED, WHITE STRIPES, RH)  
34. 163-8394 [1] BRACKET AS  
35. 163-8396 [1] BRACKET AS  
36. 198-9096 [1] FILM-IDENTIFICATION (BUCKET, BRACKET)  
37. 198-9098 [2] FILM-WARNING (KEEP AWAY FROM MACHINE)  
38. 213-3390 [1] BRACKET  
39. 213-3391 [1] SHEET  
40. 213-5302 [1] HARNESS AS-LIGHTING (REGISTRATION PLATE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
41. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
42. 198-9099 [2] FILM-INFORMATION (REFLECTOR, 40-KM)  
43. 3P-9554 [2] GROMMET  
44. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
45. 5C-2890 M [4] NUT (M6X1-THD)  
46. 5C-8312 M [6] NUT (M4X0.7-THD)  
47. 6V-7697 [2] SCREW-MACHINE (8-32X1.25-IN)  
48. 6V-9672 M [6] SCREW-MACHINE (M4X0.7X16-MM)  
49. 8M-2772 [1] CLIP (LOOP)  
50. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
51. 8T-4133 M [4] NUT (M10X1.5-THD)  
52. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
53. 8T-4138 M [4] BOLT (M6X1X20-MM)  
54. 8T-4182 M [6] BOLT (M10X1.5X45-MM)  
55. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
56. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
57. 8T-4244 M [2] NUT (M12X1.75-THD)  
58. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
59. 9L-6074 [1] GROMMET  
60. 9X-6165 [2] WASHER (6.5X22X2.5-MM THK)  
61. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
62. 7X-7877 E STRIP-EDGE (200 CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800489
 

213-6481: CONVERSION AR-ROADING

213-6481 CONVERSION AR-ROADING
S/N AYL767-UP
ITALY
CANNOT BE USED WITH @@@@@250-3728@@@@@
i01909848 SEBP3280
2136481 CONVERSION AR-ROADING Parts scheme 2136481 CONVERSION AR-ROADING Parts scheme 2136481 CONVERSION AR-ROADING Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [3] STRAP-CABLE  
2. 5P-8837 [2] LOCK PIN  
3. 6C-5712 [2] REFLECTOR (AMBER)  
4. 6C-5736 [2] REFLECTOR (RED)  
5. 6C-7159 [1] PLATE  
6. 6C-7319 [2] PLATE AS  
7. 6C-7320 [2] FILM-STRIPE (RED, WHITE)  
8. 6C-7476 [1] PLATE  
9. 6C-7485 [1] BLOCK  
11. 6C-7581 [1] LAMP GP-REGISTRATION PLATE (24-VOLT, 10-WATT)  
12. 6C-7589 [2] PLATE  
13. 6C-7590 [2] FILM (RED, WHITE STRIPES)  
14. 6C-7591 [2] LAMP GP  
15. 6C-7607 [2] CHAIN AS  
16. 6C-7608 [2] SPRING  
17. 6C-8664 [4] SPACER  
18. 9X-8937 [4] TACK  
19. 124-2541 [1] GUARD AS  
20. 124-3112 [2] BRACKET  
21. 124-4131 [1] FILM-REFLECTOR (RED, WHITE STRIPES)  
22. 139-3058 [1] PIN GP-LIFT ARM  
  6C-7460 [2] PIN  
25. 158-1202 [2] REFLECTOR (RED)  
26. 159-7342 [1] PLATE-INFORMATION (MAXIMUM WEIGHT)  
27. 161-2473 [1] FILM-REFLECTOR (RED, WHITE STRIPES, LH)  
28. 161-2474 [1] FILM-REFLECTOR (RED, WHITE STRIPES, RH)  
29. 198-9096 [1] FILM-IDENTIFICATION (BUCKET, BRACKET)  
30. 198-9098 [2] FILM-WARNING (KEEP AWAY FROM MACHINE)  
31. 200-0934 CY [1] LIGHTING GP-WARNING BEACON  
32. 213-3390 [1] BRACKET  
33. 213-3391 [1] SHEET  
34. 213-5302 [1] HARNESS AS-LIGHTING (REGISTRATION PLATE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
35. 220-0473 [1] HARNESS AS-LIGHTING (REAR TURN, MARKER LIGHTS)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES RECEPTACLE & AS WEDGE)
36. 220-4868 [1] HARNESS AS-LIGHTING (BUCKET POSITION LIGHTS)(ROADING-BUCKET POSITON)  
37. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
38. 198-9099 [2] FILM-INFORMATION (REFLECTOR, 40-KM)  
39. 3P-9554 [3] GROMMET  
40. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
42. 5C-8312 M [6] NUT (M4X0.7-THD)  
43. 6V-7697 [2] SCREW-MACHINE (8-32X1.25-IN)  
44. 6V-9672 M [6] SCREW-MACHINE (M4X0.7X16-MM)  
45. 7X-0605 [1] WASHER-HARD (13X28X1.6-MM THK)  
46. 8M-2772 [1] CLIP (LOOP)  
47. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4133 M [4] NUT (M10X1.5-THD)  
49. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
51. 8T-4178 M [1] BOLT (M10X1.5X90-MM)  
52. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
53. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
54. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
55. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
56. 8T-4244 M [2] NUT (M12X1.75-THD)  
57. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
58. 9L-6074 [1] GROMMET  
59. 9X-6165 [2] WASHER (6.5X22X2.5-MM THK)  
61. 7X-7877 E STRIP-EDGE (200-CM)  
62. 144-3679 [8] COVER-WORK LIGHT  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G II :

UNIVERSAL JOINT GP
115-1654 UNIVERSAL JOINT GP
UNIVERSAL JOINT GP
115-1650 UNIVERSAL JOINT GP
214-9075 TRANSMISSION AR
202-5676 TRANSMISSION AR
199-2758 TRANSMISSION AR
191-2351 TRANSMISSION AR
190-3777 TRANSMISSION AR
190-3776 TRANSMISSION AR
VALVE GP-MODULATING
160-8408 VALVE GP-MODULATING
VALVE GP-RELIEF
202-8933 VALVE GP-RELIEF
VALVE GP-TIRE
2D-2511 VALVE GP-TIRE
ACTUATOR GP-POWER
210-2613 ACTUATOR GP-POWER
ACTUATOR GP-POWER
262-4914 ACTUATOR GP-POWER
BLOCK GP-AXLE OSC LIMITER
176-2444 BLOCK GP-AXLE OSC LIMITER
CONVERSION AR-ROADING
213-6481 CONVERSION AR-ROADING
CONVERSION AR-ROADING
213-6481 CONVERSION AR-ROADING

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.