AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

250-3732 CAB AR-ENCLOSED ROPS S/N AYL1-UP PART OF 250-3728 HYDRAULIC AR-MACHINE 950G II WHEEL LOADER


OPERATOR STATION
CAB GP
CANOPY GP
AIR CONDITIONER GP
CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-HANDLE

WHEEL LOADER 950G II WHEEL LOADER AYL
 950G II Wheel Loader AYL00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3280 950G II AYL   (1999)

OPERATOR STATION

CAB GP
263-8090 CAB AR
185-7631 CAB AR-ENCLOSED ROPS
250-3732 CAB AR-ENCLOSED ROPS
COVER GP-CAB
170-3449 COVER GP-CAB
FLOOR GP
218-0282 FLOOR GP
FLOOR GP
237-2578 FLOOR GP
 

#SEBP32800820
 

250-3732: CAB AR-ENCLOSED ROPS

250-3732 CAB AR-ENCLOSED ROPS
S/N AYL1-UP
PART OF 250-3728 HYDRAULIC AR-MACHINE
i02104666 SEBP3280
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-3194 Y [1] CONTROL GP-ELECTROHYDRAULIC (2-FUNCTION)  
  171-8882 Y [1] LINER GP-CAB  
  173-2136 Y [1] ROPS GP-ENCLOSED  
  174-3624 Y [1] SEAT GP-SUSPENSION  
  198-8771 Y [1] SUPPORT GP-HYDRAULIC CONTROL  
  250-3754 Y [1] WIRING GP-CAB  
  257-7115 [1] FILM-IDENTIFICATION (FUSE PANEL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800821
 

203-9835: CANOPY AR-OPEN ROPS

203-9835 CANOPY AR-OPEN ROPS
S/N AYL1-UP
PART OF 203-9780 OPERATOR AR-OPEN ROPS
i02013556 SEBP3280
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  121-3908 [1] ADHESIVE  
  199-2831 Y [1] CONTROL GP-FOOT BRAKE  
  191-1856 Y [1] CONTROL GP-PARKING BRAKE  
  188-9709 Y [1] CONTROL GP-PILOT OPERATED HYD (2-FUNCTION)  
  141-8802 Y [1] CONTROL GP-STEERING (HMU)  
  Y [1] CONTROL GP-TRANSMISSION  
  170-3449 Y [1] COVER GP-CAB  
  204-3664 Y [1] DUCT GP-CAB AIR  
  204-4125 Y [1] GUARD GP-VANDALISM (INSTRUMENT PANEL)  
  176-7248 Y [1] LIGHTING GP-FLOOD (CAB FRONT)  
    S/N AYL1-1054
  232-7783 Y [1] LIGHTING GP-FLOOD (CAB FRONT)  
    S/N AYL1055-UP
  205-9413 Y [1] LINER GP-OPEN ROPS  
  192-7049 Y [1] MODULE GP-SPEEDOMETER & TACH  
  206-5145 Y [1] PANEL GP-INSTRUMENT (LOWER)  
  206-6499 Y [1] PANEL GP-INSTRUMENT (UPPER, OPEN ROPS)  
  207-1759 Y [1] PEDAL GP-GOVERNOR  
  203-9838 Y [1] ROPS GP-OPEN  
  204-4491 Y [1] SEAT GP-SUSPENSION  
  152-2114 J [1] SHEET  
  185-5311 Y [1] SUPPORT GP-HYDRAULIC CONTROL  
    -OR-
  222-2789 Y [1] SUPPORT GP-HYDRAULIC CONTROL  
  207-8618 Y [1] WIRING GP-CAB  
  J   COVERS WASHER BOTTLE HOLES ON RH FENDER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800822
 

163-0872: COMPRESSOR GP-REFRIGERANT

163-0872 COMPRESSOR GP-REFRIGERANT
S/N AYL1-UP
PART OF 187-8441, 216-9818 COMPRESSOR GP-REFRIGERANT
i01449139 SEBP3280
1630872 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 314-4018 [1] VALVE AS-PRESSURE RELIEF (REFRIGERANT COMPRESSOR)  
3. 7T-4532 [1] PLUG AS  
4. 9X-7385 [2] SEAL-O-RING  
5. 4C-2959 B OIL-AIR CONDITIONER  
6. 9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  B   USE AS REQUIRED
 

#SEBP32800823
 

187-8441: COMPRESSOR GP-REFRIGERANT

187-8441 COMPRESSOR GP-REFRIGERANT
S/N AYL1-453
PART OF 185-1639 AIR CONDITIONER AR
i01477510 SEBP3280
1878441 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-0872 Y [1] COMPRESSOR GP-REFRIGERANT  
2. 191-5215 [1] BELT-SERPENTINE (A/C COMPRESSOR)  
3. 192-1563 Y [2] IDLER GP-BELT (ALTERNATOR, REFRIGERANT COMPR)  
4. 7X-2538 M [4] BOLT (M8X1.25X100-MM)  
5. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800824
 

216-9818: COMPRESSOR GP-REFRIGERANT

216-9818 COMPRESSOR GP-REFRIGERANT
S/N AYL454-UP
PART OF 217-0926 AIR CONDITIONER AR
i01828464 SEBP3280
2169818 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-0872 Y [1] COMPRESSOR GP-REFRIGERANT  
2. 192-1563 Y [2] IDLER GP-BELT (ALTERNATOR, REFRIGERANT COMPR)  
3. 219-3304 [1] BELT-SERPENTINE (A/C COMPRESSOR)  
4. 7X-2538 M [4] BOLT (M8X1.25X100-MM)  
5. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800825
 

209-5806: CONDENSER & MTG GP-REFRIGERANT

209-5806 CONDENSER & MTG GP-REFRIGERANT
S/N AYL1-UP
PART OF 185-1639, 217-0926 AIR CONDITIONER AR
i01616359 SEBP3280
2095806 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1384 [1] BUMPER-CONICAL  
2. 125-2873 [1] CORE AS-CONDENSER  
3. 176-0326 [1] HINGE AS  
4. 209-5789 [1] BRACKET  
5. 209-5790 [1] BRACKET AS  
6. 5C-7261 M [1] NUT (M8X1.25-THD)  
7. 7X-7729 [9] WASHER (11X25X3-MM THK)  
8. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
9. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP32800826
 

250-3194: CONTROL GP-ELECTROHYDRAULIC

250-3194 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N AYL1-UP
PART OF 250-3732 CAB AR-ENCLOSED ROPS
i02105249 SEBP3280
2503194 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2503194 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2503194 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
2. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
3. 3S-2093 [2] STRAP-CABLE  
4. 5C-2874 M [4] NUT (M5X0.8-THD)  
5. 5P-6120 D TRIM-EDGE (0.1-M)  
6. 8L-8413 [2] STRAP-CABLE (WHITE)  
7. 8R-3695 [1] GROMMET  
8. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
9. 105-3372 [1] SPRING  
10. 106-1582 [1] HOUSING  
11. 106-1583 [2] ROD  
12. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
13. 114-4247 [4] BRACKET AS  
14. 139-1378 [4] BEARING  
15. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
16. 149-3949 [2] LEVER-CONTROL  
17. 163-8119 [2] SPRING  
18. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
19. 175-2209 [1] SWITCH AS-PUSH BUTTON (TRANSMISSION DOWNSHIFT)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  6F-0253 [1] LOCKWASHER  
  172-3511 [1] NUT (5/8-24-THD)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
20. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
21. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
22. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
23. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
24. 207-7447 [2] PLATE  
25. 208-3916 [1] BRACKET  
26. 208-3917 [1] BRACKET  
27. 208-3918 [1] PLATE  
28. 208-8333 [2] COVER  
29. 209-9250 [1] BRACKET AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
30. 214-4862 Y [2] SENSOR GP-POSITION (CONTROL LEVER)  
31. 218-3806 [2] SPACER (8.2X18X12-MM THK)  
32. 246-2642 [1] SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE)(FORWARD, NEUTRAL, REVERSE)  
33. 247-4184 [1] FILM-IDENTIFICATION (DOWNSHIFT SWITCH)  
34. 250-3806 [1] PLATE  
35. 250-3808 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
36. 259-3979 [1] COVER  
37. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
38. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
39. 3E-8020 M [2] SCREW-TRUSS HEAD (M6X1X25-MM)  
40. 5C-2890 M [1] NUT (M6X1-THD)  
41. 5P-8523 [1] GROMMET  
42. 5P-8524 [1] GROMMET  
43. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
44. 8M-2771 [2] CLIP  
45. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
46. 8T-4970 M [10] BOLT (M6X1X14-MM)  
47. 8T-4971 M [4] BOLT (M6X1X30-MM)  
48. 9X-2026 [9] WASHER (6.5X17X1-MM THK)  
49. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
50. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
51. 6V-9335 D SEAL (0.2-M)  
52. 090-4808 J SEAL (6-DM)  
  D   ORDER BY THE METER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800827
 

251-0692: CONTROL GP-ELECTROHYDRAULIC

251-0692 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYL1-UP
PART OF 263-8090 CAB AR, 251-0672 HYDRAULIC AR-3 VALVE
i02106527 SEBP3280
2510692 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2510692 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6120 D TRIM-EDGE (0.1-M)  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
3. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
4. 3S-2093 [3] STRAP-CABLE  
5. 5C-2874 M [4] NUT (M5X0.8-THD)  
6. 8L-8413 [3] STRAP-CABLE (WHITE)  
7. 8R-3695 [1] GROMMET  
8. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
9. 9T-4735 [1] SPRING  
10. 105-2976 [3] FLANGE  
11. 105-3372 [1] SPRING  
12. 106-1582 [1] HOUSING  
13. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
14. 114-4247 [4] BRACKET AS  
15. 114-8165 [2] ROD  
16. 139-1378 [6] BEARING  
17. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
18. 149-3949 [3] LEVER-CONTROL  
19. 150-6287 [2] SPACER (6.22X9.52X31-MM THK)  
20. 163-8119 [3] SPRING  
21. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
22. 175-2209 [1] SWITCH AS-PUSH BUTTON (TRANSMISSION DOWNSHIFT)  
  6F-0253 [1] LOCKWASHER  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  172-3511 [1] NUT (5/8-24-THD)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
23. 188-0955 [3] COIL AS-DETENT  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
24. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
25. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
26. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
27. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
28. 207-7447 [2] PLATE  
29. 208-2479 [2] SPACER (10X13.1X5.5-MM THK)  
30. 208-8333 [3] COVER  
31. 210-6782 [1] COVER  
32. 211-7710 [1] COVER AS  
33. 211-8285 [1] PLATE  
34. 214-4862 Y [3] SENSOR GP-POSITION (CONTROL LEVER)  
35. 238-2772 [1] PLATE AS  
  6T-5600 [4] BOSS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  105-2797 [1] BOSS  
36. 246-2642 [1] SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE)  
37. 247-4184 [1] FILM-IDENTIFICATION (DOWNSHIFT SWITCH)  
38. 259-3982 [1] COVER  
39. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
40. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
41. 5C-2890 M [1] NUT (M6X1-THD)  
42. 5F-9757 [2] GROMMET  
43. 5P-8523 [1] GROMMET  
44. 5P-8524 [1] GROMMET  
45. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
46. 7X-2533 M [3] BOLT (M6X1X35-MM)  
47. 7X-2619 M [1] BOLT (M6X1X10-MM)  
48. 8C-8451 M [1] BOLT (M6X1X40-MM)  
49. 8M-2771 [2] CLIP  
50. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
51. 8T-4970 M [10] BOLT (M6X1X14-MM)  
52. 9X-2026 [8] WASHER (6.5X17X1-MM THK)  
53. 9X-2043 M [3] SCREW-TRUSS HEAD (M6X1X14-MM)  
54. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
55. 8T-3392 D SEAL (0.07-M EACH)  
55A. 8T-3392 D SEAL (0.16-M)  
56. 6V-9335 D SEAL (0.5-M)  
56A. 6V-9335 D SEAL (0.16-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800828
 

211-3118: CONTROL GP-HANDLE

211-3118 CONTROL GP-HANDLE -DIRECTION, DOWNSHIFT
S/N AYL1-453
i01617064 SEBP3280
2113118 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-1293 M [2] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
2. 145-0877 [1] HANDLE GP-MODULAR (DIRECTION, DOWNSHIFT)  
3. 196-0109 [1] ROD  
4. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
5. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
6. 114-3940 J [1] ROD  
  J   REQUIRED ONLY WHEN USED ON 2 & 3 VALVE SINGLE AXIS LEVERS
  M   METRIC PART
 

#SEBP32800829
 

211-3118: CONTROL GP-HANDLE

211-3118 CONTROL GP-HANDLE -DIRECTION, DOWNSHIFT
S/N AYL454-UP
i01831437 SEBP3280
2113118 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-1293 M [2] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
2. 114-3940 J [1] ROD  
3. 196-0109 [1] ROD  
4. 208-6097 Y [1] HANDLE GP-MODULAR (DIRECTION, DOWNSHIFT SWITCHES)  
  186-3735 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
6. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
  J   REQUIRED ONLY WHEN USED ON 2 & 3 VALVE SINGLE AXIS LEVERS
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Improving the Environment of the Operator{7301}
Improving the Environment of the Operator{7301}
Service Magazine
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02

Caterpillar Parts SIS Catalog 950G II :

185-7631 CAB AR-ENCLOSED ROPS
263-8090 CAB AR
ARMREST GP
8Y-6000 ARMREST GP
ARMREST GP
8Y-5904 ARMREST GP
ARMREST GP
8Y-4200 ARMREST GP
ARMREST GP
188-9820 ARMREST GP
ARMREST GP
162-8448 ARMREST GP
ARMREST GP
162-8447 ARMREST GP
203-9835 CANOPY AR-OPEN ROPS
COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
187-8441 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
216-9818 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
209-5806 CONDENSER & MTG GP-REFRIGERANT
CONTROL GP-ELECTROHYDRAULIC
250-3194 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
251-0692 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-HANDLE
211-3118 CONTROL GP-HANDLE

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.