OPERATOR STATION
SEAT GPWASHER GP-WINDOW
BOX GP-STORAGE
CAB GP
OPERATOR STATION
SEAT GP
#SEBP32800990
172-9444: SUSPENSION GP-SEAT
172-9444 SUSPENSION GP-SEAT -AIR
S/N AYL1-1036
24-VOLT
PART OF 178-7916 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
S/N AYL1-1036
24-VOLT
PART OF 178-7916 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-4818 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 2. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 3. | 8Y-6917 | [1] | BOOT | |
| 4. | 102-6317 | [2] | BUMPER | |
| 5. | 123-8157 | [2] | SHAFT | |
| 6. | 123-9131 | [1] | ABSORBER AS-SHOCK | |
| 7. | 124-7126 | [1] | SCISSORS AS | |
| 8. | 124-7128 | [1] | BUSHING-RELIEF | |
| 9. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 10. | 147-4549 | [1] | FITTING-ELBOW | |
| 11. | 147-6522 | [1] | SPRING | |
| 12. | 149-2399 | [1] | FITTING | |
| 13. | 149-2400 | [1] | FITTING | |
| 14. | 149-2403 | [1] | VALVE AS | |
| 15. | 160-7765 | [1] | WASHER (16.26X22.23X1.97-MM THK) | |
| 16. | 160-7766 B | [3] | WASHER (16.26X22.23X0.51-MM THK) | |
| 17. | 160-7767 B | [8] | WASHER (3.68X12.57X0.51-MM THK) | |
| 18. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 19. | 171-4045 | [1] | HOUSING AS | |
| 20. | 1B-4430 | [4] | NUT-JAM (1/2-20-THD) | |
| 21. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 22. | 4V-7884 | [2] | BEARING | |
| 23. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 24. | 6K-0806 | [1] | STRAP-CABLE | |
| 25. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| 26. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) | |
| 27. | 8Y-6922 | [1] | HOUSING AS | |
| 28. | 9M-0164 | [1] | CLAMP-HOSE | |
| 29. | 147-6541 E | TUBE (29.4-CM) | ||
| 29A. | 147-6541 E | TUBE (0.9-CM) | ||
| 203-7700 F | [1] | BOLT (3/8-16-THD) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 149-2398 | [1] | KIT-AIR COMPRESSOR | ||
| (INCLUDES COMPRESSOR AS & SLEEVE) | ||||
| 8Y-6928 | [1] | KIT-FASTENER | ||
| (INCLUDES CLIPS-RATCHET) | ||||
| 123-9128 | [1] | KIT-ROLLER | ||
| (INCLUDES BEARINGS-FLANGED, ROLLERS, & TIE WRAP (SMALL)) | ||||
| 128-0613 | [1] | KIT-TETHER | ||
| (INCLUDES TETHER) | ||||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
#SEBP32800991
191-2933: SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT -AIR
S/N AYL1-UP
PART OF 219-8094, 219-8096 SEAT GP-SUSPENSION
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
S/N AYL1-UP
PART OF 219-8094, 219-8096 SEAT GP-SUSPENSION
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [33] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 192-7760 | [1] | SHAFT | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 211-5358 E | CONDUIT-FLEXIBLE (64-CM) | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 192-7822 | [1] | SHAFT | |
| 23. | 237-3943 | [1] | BRACKET | |
| 24. | 237-3970 Y | [1] | AIR COMPRESSOR GP-SEAT | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.267-M) | ||
| 31A. | 5P-6010 D | TUBE (0.356-M) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 B | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 ABY | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32800992
191-2933: SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT -AIR
S/N AYL1-UP
PART OF 219-8094, 219-8096 SEAT GP-SUSPENSION
Type 1
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
S/N AYL1-UP
PART OF 219-8094, 219-8096 SEAT GP-SUSPENSION
Type 1
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [26] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 211-5358 E | CONDUIT-FLEXIBLE (64-CM) | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 | [1] | SHAFT (OUTER) | |
| 23. | 372-2158 C | [1] | BRACKET-MOUNTING | |
| 24. | 370-9894 C | [1] | COMPRESSOR AS | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.27-M) | ||
| 31A. | 5P-6010 D | TUBE (0.36-M) | ||
| 32. | 387-0314 C | [1] | WIRE AS (16-GA, ORANGE) | |
| 33. | 387-0317 C | [1] | WIRE AS (16-GA, BLACK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 ABY | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32800993
191-2933: SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT -AIR
S/N AYL1-UP
PART OF 219-8094, 219-8096 SEAT GP-SUSPENSION
Type 2
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
S/N AYL1-UP
PART OF 219-8094, 219-8096 SEAT GP-SUSPENSION
Type 2
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [26] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 433-5754 CY | [1] | HARNESS AS-WIRING (SEAT AIR COMPRESSOR) | |
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 | [1] | SHAFT (OUTER) | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.27-M) | ||
| 31A. | 5P-6010 D | TUBE (0.36-M) | ||
| 32. | 442-8151 C | [1] | CLIP-CABLE | |
| 33. | 3S-2093 C | [4] | STRAP-CABLE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 ABY | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| 397-6405 CY | [1] | KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32800994
199-5725: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 237-3943 | [1] | BRACKET | |
| 7. | 164-1234 | [1] | PLATE | |
| 8. | 101-0003 | [26] | FASTENER | |
| 9. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 11. | 192-7752 | [4] | SHAFT AS | |
| 12. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 13. | 314-5274 | [1] | SHAFT (INNER) | |
| 14. | 192-7767 | [1] | SCISSORS AS | |
| 15. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 16. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 17. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 18. | 192-7795 | [1] | BOOT | |
| 19. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 211-5358 E | CONDUIT-FLEXIBLE (64-CM) | |||
| 20. | 192-7810 | [1] | SPRING AS-AIR | |
| 163-1135 | [1] | SPRING | ||
| 5P-4423 | [1] | ELBOW | ||
| 22. | 192-7820 | [3] | BUMPER | |
| 23. | 314-5275 | [1] | SHAFT (OUTER) | |
| 24. | 237-3970 Y | [1] | AIR COMPRESSOR GP-SEAT | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 32. | 5P-6010 D | TUBE (0.3-M) | ||
| 32A. | 5P-6010 D | TUBE (0.4-M) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SEAT) | ||
| (INCLUDES KNOB ASSEMBLY) | ||||
| 212-7779 BY | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT) | ||
| 213-5170 B | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 211-9294 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHER) | ||||
| 192-7848 B | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32800995
256-8768: SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT -AIR
S/N AYL1-UP
PART OF 248-6193, 248-6194 SEAT GP-SUSPENSION
Type 1
S/N AYL1-UP
PART OF 248-6193, 248-6194 SEAT GP-SUSPENSION
Type 1
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 101-0003 | [26] | FASTENER | |
| 6. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 7. | 164-1234 | [1] | PLATE | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 192-7760 | [1] | SHAFT | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | ||
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 163-1135 | [1] | SPRING | ||
| 5P-4423 | [1] | ELBOW | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 192-7822 | [1] | SHAFT | |
| 23. | 237-3943 | [1] | BRACKET | |
| 24. | 237-3970 Y | [1] | AIR COMPRESSOR GP-SEAT | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 5P-6010 D | TUBE (0.26-M) | ||
| 29A. | 5P-6010 D | TUBE (0.36-M) | ||
| 30. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 31. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 31A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SEAT) | ||
| (INCLUDES KNOB ASSEMBLY) | ||||
| 212-7779 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER, | ||||
| BRACKETS, KIT, CABLE AS & KNOB) | ||||
| 213-5170 | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 211-9294 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHER) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32800996
256-8768: SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT -AIR
S/N AYL1-UP
PART OF 248-6193, 248-6194 SEAT GP-SUSPENSION
Type 2
S/N AYL1-UP
PART OF 248-6193, 248-6194 SEAT GP-SUSPENSION
Type 2
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 5. | 101-0003 | [26] | FASTENER | |
| 6. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 7. | 164-1234 | [1] | PLATE | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 C | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 433-5754 | [1] | HARNESS AS-WIRING (SEAT AIR COMPRESSOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 C | [1] | SHAFT (OUTER) | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 5P-6010 D | TUBE (0.257-M) | ||
| 29A. | 5P-6010 D | TUBE (0.356-M) | ||
| 30. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 31. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 31A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 34. | 442-8151 | [1] | CLIP-CABLE | |
| 35. | 3S-2093 | [4] | STRAP-CABLE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SEAT) | ||
| (INCLUDES KNOB ASSEMBLY) | ||||
| 212-7779 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER, | ||||
| BRACKETS, KIT, CABLE ASSEMBLY & KNOB) | ||||
| 211-9294 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHER) | ||||
| 213-5170 | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| 397-6405 | [1] | KIT-SEAT AIR COMPRESSOR | ||
| (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER | |||
| M | METRIC PART | |||
#SEBP32800997
155-4774: TANK GP-WINDOW WASHER
For full view, you need register
#SEBP32800998
177-4807: TRAY GP-STORAGE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-3426 J | [1] | LOCK GP-CYLINDER | |
| 7F-9223 | [1] | LOCKWASHER | ||
| 8T-5004 | [1] | SCREW-MACHINE (1/4-28X0.375-IN) | ||
| 2. | 9X-2042 M | [6] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 3. | 125-7046 | [1] | PLATE AS | |
| 4. | 173-2260 | [1] | TRAY AS | |
| 3E-4304 M | [4] | INSERT-THREADED (M6X1-THD) | ||
| 5. | [1] | COVER AS | ||
| 3E-4304 M | [2] | INSERT-THREADED (M6X1-THD) | ||
| 6. | 192-8845 | [1] | HINGE AS | |
| 7. | 192-8888 | [1] | ANGLE | |
| 8. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 9. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP32800999
131-2633: VISOR GP-CAB
131-2633 VISOR GP-CAB
S/N AYL1-UP
S/N AYL1-UP
For full view, you need register
