AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

208-3915 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION S/N AYE481-UP PART OF 185-7632 CAB AR, 204-4489 CANOPY AR-OPEN ROPS 962G II


OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC

WHEEL LOADER 962G II WHEEL LOADER AYE
 962G II Wheel Loader AYE00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3281 962G II AYE   (1999)

OPERATOR STATION

CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
 

#SEBP32810750
 

208-3915: CONTROL GP-ELECTROHYDRAULIC

208-3915 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N AYE481-UP
PART OF 185-7632 CAB AR, 204-4489 CANOPY AR-OPEN ROPS
i01831032 SEBP3281
2083915 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2083915 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 5C-2874 M [4] NUT (M5X0.8-THD)  
4. 8R-3695 [1] GROMMET  
5. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
6. 9X-2026 [9] WASHER (6.5X17X1-MM THK)  
7. 3S-2093 [2] STRAP-CABLE  
8. 105-3372 [1] SPRING  
9. 106-1582 [1] HOUSING  
10. 106-1583 [2] ROD  
11. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
12. 114-4247 [4] BRACKET AS  
13. 139-1378 [4] BEARING  
14. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
15. 149-3949 [2] LEVER-CONTROL  
16. 214-4862 CY [2] SENSOR GP-POSITION (CONTROL LEVER)  
17. 163-8119 [2] SPRING  
18. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
19. 173-2125 [1] COVER  
20. 173-2127 [1] COVER  
21. 6V-9335 BD SEAL  
22. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
23. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
24. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
25. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
26. 207-7447 [2] PLATE  
27. 208-3916 [1] BRACKET  
28. 208-3917 [1] BRACKET  
29. 208-3918 [1] PLATE  
30. 208-8333 [2] COVER  
31. 209-9250 [1] BRACKET AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
32. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
33. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
34. 5C-2890 M [1] NUT (M6X1-THD)  
35. 5P-8523 [1] GROMMET  
36. 5P-8524 [1] GROMMET  
37. 8T-4971 M [4] BOLT (M6X1X30-MM)  
38. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
39. 8M-2771 [2] CLIP  
40. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
41. 8T-4970 M [10] BOLT (M6X1X14-MM)  
42. 9X-2044 M [7] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 090-4808 BD SEAL  
44. 5P-6120 BD TRIM-EDGE  
45. 8L-8413 [2] STRAP-CABLE (WHITE)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810751
 

210-9583: CONTROL GP-ELECTROHYDRAULIC

210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYE1-UP
PART OF 192-4679 HYDRAULIC AR-3 VALVE
Type 1
i01596226 SEBP3281
2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
2. 5C-2874 M [4] NUT (M5X0.8-THD)  
3. 6T-5600 [2] BOSS  
4. 8R-3695 [1] GROMMET  
5. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
6. 9T-4735 [1] SPRING  
7. 9X-2026 [8] WASHER (6.5X17X1-MM THK)  
8. 105-2976 [4] FLANGE  
9. 105-3372 [1] SPRING  
10. 106-1582 [1] HOUSING  
11. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
12. 114-4247 [4] BRACKET AS  
13. 114-8165 [2] ROD  
14. 139-1378 [6] BEARING  
15. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
16. 149-3949 [3] LEVER-CONTROL  
17. 150-6287 [2] SPACER (6.22X9.52X31-MM THK)  
18. 161-8979 Y [3] SENSOR GP-POSITION (CONTROL LEVER)  
19. 163-8119 [3] SPRING  
20. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
21. 179-1238 [1] COVER  
22. 184-2616 [1] COVER  
23. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
24. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
25. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
26. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
27. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
28. 207-7447 [2] PLATE  
29. 208-2479 [2] SPACER (10X13.1X5.5-MM THK)  
30. 208-8333 [3] COVER  
31. 211-7708 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
32. 211-7710 [1] COVER AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
33. 211-8285 [1] PLATE  
34. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
35. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
36. 5C-2890 M [1] NUT (M6X1-THD)  
37. 5P-8523 [3] GROMMET  
38. 5P-8524 [1] GROMMET  
39. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
40. 7X-2533 M [3] BOLT (M6X1X35-MM)  
41. 7X-2619 M [1] BOLT (M6X1X10-MM)  
42. 8C-8451 M [1] BOLT (M6X1X40-MM)  
43. 8M-2771 [2] CLIP  
44. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 8T-4970 M [10] BOLT (M6X1X14-MM)  
46. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
47. 090-4808 BD SEAL  
48. 6V-9335 BD SEAL  
49. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810752
 

210-9583: CONTROL GP-ELECTROHYDRAULIC

210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYE1-447
PART OF 192-4679 HYDRAULIC AR-3 VALVE
i01685365 SEBP3281
2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
2. 5C-2874 M [4] NUT (M5X0.8-THD)  
3. 6T-5600 [2] BOSS  
4. 8R-3695 [1] GROMMET  
5. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
6. 9T-4735 [1] SPRING  
7. 9X-2026 [8] WASHER (6.5X17X1-MM THK)  
8. 105-2976 [3] FLANGE  
9. 105-3372 [1] SPRING  
10. 106-1582 [1] HOUSING  
11. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
12. 114-4247 [4] BRACKET AS  
13. 114-8165 [2] ROD  
14. 139-1378 [6] BEARING  
15. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
16. 149-3949 [3] LEVER-CONTROL  
17. 150-6287 [2] SPACER (6.22X9.52X31-MM THK)  
18. 161-8979 Y [3] SENSOR GP-POSITION (CONTROL LEVER)  
19. 163-8119 [3] SPRING  
20. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
21. 179-1238 [1] COVER  
22. 184-2616 [1] COVER  
23. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
24. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
25. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
26. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
27. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
28. 207-7447 [2] PLATE  
29. 208-2479 [2] SPACER (10X13.1X5.5-MM THK)  
30. 208-8333 [3] COVER  
31. 211-7708 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
32. 211-7710 [1] COVER AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
33. 211-8285 [1] PLATE  
34. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
35. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
36. 5C-2890 M [1] NUT (M6X1-THD)  
37. 5P-8523 [1] GROMMET  
38. 5P-8524 [1] GROMMET  
39. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
40. 7X-2533 M [3] BOLT (M6X1X35-MM)  
41. 7X-2619 M [1] BOLT (M6X1X10-MM)  
42. 8C-8451 M [1] BOLT (M6X1X40-MM)  
43. 8M-2771 [2] CLIP  
44. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 8T-4970 M [10] BOLT (M6X1X14-MM)  
46. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
47. 090-4808 BD SEAL  
48. 6V-9335 BD SEAL  
49. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
50. 3S-2093 C [6] STRAP-CABLE  
51. 5F-9757 C [2] GROMMET  
52. 5P-6120 BCD TRIM-EDGE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810753
 

210-9583: CONTROL GP-ELECTROHYDRAULIC

210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYE1-UP
PART OF 234-0424 HYDRAULIC AR, 192-4677, 192-4679 HYDRAULIC AR-3 VALVE
Type 2
i01831078 SEBP3281
2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
2. 5C-2874 M [4] NUT (M5X0.8-THD)  
3. 6T-5600 C [4] BOSS  
4. 8R-3695 [1] GROMMET  
5. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
6. 9T-4735 [1] SPRING  
7. 9X-2026 [8] WASHER (6.5X17X1-MM THK)  
8. 105-2976 [3] FLANGE  
9. 105-3372 [1] SPRING  
10. 106-1582 [1] HOUSING  
11. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
12. 114-4247 [4] BRACKET AS  
13. 114-8165 [2] ROD  
14. 139-1378 [6] BEARING  
15. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
16. 149-3949 [3] LEVER-CONTROL  
17. 150-6287 [2] SPACER (6.22X9.52X31-MM THK)  
18. 214-4862 CY [3] SENSOR GP-POSITION (CONTROL LEVER)  
19. 163-8119 [3] SPRING  
20. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
21. 210-6782 C [1] COVER  
22. 210-6780 C [1] COVER  
23. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
24. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
25. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
26. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
27. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
28. 207-7447 [2] PLATE  
29. 208-2479 [2] SPACER (10X13.1X5.5-MM THK)  
30. 208-8333 [3] COVER  
31. 211-7708 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
32. 211-7710 [1] COVER AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
33. 211-8285 [1] PLATE  
34. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
35. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
36. 5C-2890 M [1] NUT (M6X1-THD)  
37. 5P-8523 [1] GROMMET  
38. 5P-8524 [1] GROMMET  
39. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
40. 7X-2533 M [3] BOLT (M6X1X35-MM)  
41. 7X-2619 M [1] BOLT (M6X1X10-MM)  
42. 8C-8451 M [1] BOLT (M6X1X40-MM)  
43. 8M-2771 [2] CLIP  
44. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 8T-4970 M [10] BOLT (M6X1X14-MM)  
46. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
47. 090-4808 BD SEAL  
48. 6V-9335 BD SEAL  
49. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
50. 3S-2093 C [3] STRAP-CABLE  
51. 5F-9757 [2] GROMMET  
52. 5P-6120 BD TRIM-EDGE  
53. 8L-8413 C [3] STRAP-CABLE (WHITE)  
54. 9X-2045 M [3] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810754
 

210-9583: CONTROL GP-ELECTROHYDRAULIC

210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYE1-UP
PART OF 192-4677, 192-4679 HYDRAULIC AR-3 VALVE
Type 3
i02015485 SEBP3281
2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2109583 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
2. 5C-2874 M [4] NUT (M5X0.8-THD)  
3. 262-6873 [2] SPACER  
4. 8R-3695 [1] GROMMET  
5. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
6. 9N-6249 [1] SPRING-RETAINING  
7. 9X-2026 [8] WASHER (6.5X17X1-MM THK)  
8. 105-2976 [2] FLANGE  
9. 105-3372 [1] SPRING  
10. 106-1582 [1] HOUSING  
11. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
12. 114-4247 [4] BRACKET AS  
13. 114-8165 [2] ROD  
14. 139-1378 [6] BEARING  
15. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
16. 149-3949 [3] LEVER-CONTROL  
17. 262-6875 [2] SPACER  
18. 214-4862 Y [3] SENSOR GP-POSITION (CONTROL LEVER)  
19. 163-8119 [3] SPRING  
20. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
21. 210-6782 [1] COVER  
22. 238-2771 C [1] COVER  
23. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
24. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
25. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
26. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
27. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
28. 207-7447 [2] PLATE  
29. 208-2479 [2] SPACER (10X13.1X5.5-MM THK)  
30. 208-8333 [3] COVER  
31. 262-6870 C [1] PLATE AS  
32. 211-7710 [1] COVER AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
33. 211-8285 [1] PLATE  
34. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
35. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
36. 5C-2890 M [1] NUT (M6X1-THD)  
37. 5P-8523 [1] GROMMET  
38. 5P-8524 [1] GROMMET  
39. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
40. 7X-2533 M [3] BOLT (M6X1X35-MM)  
41. 7X-2619 M [1] BOLT (M6X1X10-MM)  
42. 8C-8451 M [1] BOLT (M6X1X40-MM)  
43. 8M-2771 [2] CLIP  
44. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 8T-4970 M [10] BOLT (M6X1X14-MM)  
46. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
47. 090-4808 D SEAL (0.16-M)  
47A. 090-4808 D [2] SEAL (0.07-M EACH)  
48. 6V-9335 CD SEAL (0.16-M)  
48A. 6V-9335 CD SEAL (0.50-M)  
49. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
50. 3S-2093 [3] STRAP-CABLE  
51. 5F-9757 [2] GROMMET  
52. 5P-6120 D TRIM-EDGE (0.85-M)  
53. 8L-8413 [3] STRAP-CABLE (WHITE)  
54. 9X-2043 CM [3] SCREW-TRUSS HEAD (M6X1X14-MM)  
55. 262-6872 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810755
 

213-6015: CONTROL GP-ELECTROHYDRAULIC

213-6015 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N AYE512-UP
CANNOT BE USED WITH @@@@@234-0424@@@@@, @@@@@192-4679@@@@@, @@@@@266-0521@@@@@, @@@@@189-4829@@@@@, @@@@@192-4677@@@@@, @@@@@218-3833@@@@@, @@@@@233-0208@@@@@, @@@@@233-0209@@@@@
i02271228 SEBP3281
2136015 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2136015 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
3. 205-8210 [1] CUSHION AS  
4. 205-8211 [1] PLATE  
5. 205-8212 [1] CUSHION AS  
6. 210-6783 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
7. 213-6016 [1] BRACKET AS  
  6V-9632 M [18] NUT-WELD (M6X1-THD)  
  188-9038 [3] BOSS  
8. 213-6020 [1] COVER  
9. 226-8664 Y [1] CONTROL GP-JOYSTICK (2-FUNCTION)  
10. 233-6564 [1] FILM-CONTROL (JOYSTICK, 2-FUNCTION)  
11. 236-2526 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  180-0050 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS & WEDGE)
12. 5C-2890 M [2] NUT (M6X1-THD)  
13. 6R-7653 M [2] SCREW (M6X1X15-MM)  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
18. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-4970 M [2] BOLT (M6X1X14-MM)  
20. 9X-2038 [4] WASHER (7X19X2-MM THK)  
21. 9X-2044 M [16] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5P-6120 D TRIM-EDGE (0.7-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810756
 

218-3833: CONTROL GP-ELECTROHYDRAULIC

218-3833 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N AYE512-UP
FOR USE WITH @@@@@192-4677@@@@@, @@@@@192-4679@@@@@, @@@@@234-0424@@@@@
CANNOT BE USED WITH @@@@@189-4829@@@@@, @@@@@266-0521@@@@@, @@@@@213-6015@@@@@, @@@@@233-0208@@@@@, @@@@@233-0209@@@@@
i02204098 SEBP3281
2183833 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2183833 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
3. 205-8210 [1] CUSHION AS  
4. 205-8211 [1] PLATE  
5. 205-8212 [1] CUSHION AS  
6. 210-6783 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
7. 213-6016 [1] BRACKET AS  
  6V-9632 M [18] NUT-WELD (M6X1-THD)  
  188-9038 [3] BOSS  
8. 213-6020 [1] COVER  
9. 226-8665 Y [1] CONTROL GP-JOYSTICK (3-FUNCTION)  
10. 233-6566 [1] FILM-CONTROL (JOYSTICK, 3-FUNCTION)  
11. 236-2526 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
  7K-1181 [1] STRAP-CABLE  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  180-0050 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT-PLUG INCLUDES PLUG ASSEMBLY & WEDGE)
12. 5C-2890 M [2] NUT (M6X1-THD)  
13. 6R-7653 M [2] SCREW (M6X1X15-MM)  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
18. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-4970 M [2] BOLT (M6X1X14-MM)  
20. 9X-2038 [4] WASHER (7X19X2-MM THK)  
21. 9X-2044 M [16] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5P-6120 BD TRIM-EDGE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810757
 

233-0208: CONTROL GP-ELECTROHYDRAULIC

233-0208 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION WITH AUTODIG
S/N AYE512-UP
Type 1
FOR USE WITH @@@@@189-4829@@@@@, @@@@@266-0521@@@@@
CANNOT BE USED WITH @@@@@192-4677@@@@@, @@@@@192-4679@@@@@, @@@@@234-0424@@@@@, @@@@@218-3833@@@@@, @@@@@233-0209@@@@@, @@@@@213-6015@@@@@
i02203392 SEBP3281
2330208 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2330208 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
3. 205-8210 [1] CUSHION AS  
4. 205-8211 [1] PLATE  
5. 205-8212 [1] CUSHION AS  
6. 210-6783 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
7. 213-6016 [1] BRACKET AS  
  6V-9632 M [18] NUT-WELD (M6X1-THD)  
  188-9038 [3] BOSS  
8. 213-6020 [1] COVER  
9. 220-6102 Y [1] CONTROL GP-JOYSTICK (2-FUNCTION WITH AUTODIG)  
10. 233-6565 [1] FILM-CONTROL (JOYSTICK, 2-FUNCTION WITH AUTODIG)  
11. 236-2526 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  180-0050 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS & WEDGE)
12. 5C-2890 M [2] NUT (M6X1-THD)  
13. 6R-7653 M [2] SCREW (M6X1X15-MM)  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
18. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-4970 M [2] BOLT (M6X1X14-MM)  
20. 9X-2038 [4] WASHER (7X19X2-MM THK)  
21. 9X-2044 M [16] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5P-6120 D TRIM-EDGE (0.4-M)  
22A. 5P-6120 D TRIM-EDGE (0.115-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810758
 

233-0208: CONTROL GP-ELECTROHYDRAULIC

233-0208 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION WITH AUTODIG
S/N AYE512-UP
Type 2
FOR USE WITH @@@@@189-4829@@@@@, @@@@@266-0521@@@@@
CANNOT BE USED WITH @@@@@192-4677@@@@@, @@@@@192-4679@@@@@, @@@@@234-0424@@@@@, @@@@@218-3833@@@@@, @@@@@233-0209@@@@@, @@@@@213-6015@@@@@
i04040892 SEBP3281
2330208 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
3. 205-8210 [1] CUSHION AS  
4. 205-8211 [1] PLATE  
5. 213-6016 [1] BRACKET AS  
  6V-9632 M [18] NUT-WELD (M6X1-THD)  
  188-9038 [3] BOSS  
6. 213-6020 [1] COVER  
7. 220-6102 Y [1] CONTROL GP-JOYSTICK (2-FUNCTION WITH AUTODIG)  
8. 233-6565 [1] FILM-CONTROL (JOYSTICK, 2-FUNCTION WITH AUTODIG)  
9. 236-2526 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  180-0050 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [16] PLUG-SEAL  
  8T-8730 [24] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  7K-1181 [1] STRAP-CABLE  
  218-4935 [1] SUPPRESSOR-ARC  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
10. 6R-7653 M [2] SCREW (M6X1X15-MM)  
11. 8T-4205 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 8T-4970 M [2] BOLT (M6X1X14-MM)  
13. 9X-2044 CM [12] SCREW-TRUSS HEAD (M6X1X16-MM)  
14. 5P-6120 D TRIM-EDGE (0.4-M)  
14A. 5P-6120 D TRIM-EDGE (0.2-M EACH)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32810759
 

233-0209: CONTROL GP-ELECTROHYDRAULIC

233-0209 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION WITH AUTODIG
S/N AYE512-UP
FOR USE WITH @@@@@192-4677@@@@@, @@@@@189-4829@@@@@, @@@@@266-0521@@@@@, @@@@@192-4679@@@@@, @@@@@234-0424@@@@@
CANNOT BE USED WITH @@@@@213-6015@@@@@, @@@@@218-3833@@@@@, @@@@@233-0208@@@@@
i02193404 SEBP3281
2330209 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2330209 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
3. 205-8210 [1] CUSHION AS  
4. 205-8211 [1] PLATE  
5. 205-8212 [1] CUSHION AS  
6. 208-6060 Y [1] CONTROL GP-JOYSTICK (3-FUNCTION WITH AUTODIG)  
7. 210-6783 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
8. 213-6016 [1] BRACKET AS  
  6V-9632 M [18] NUT-WELD (M6X1-THD)  
  188-9038 [3] BOSS  
9. 213-6020 [1] COVER  
10. 233-6567 [1] FILM-CONTROL (JOYSTICK, 3-FUNCTION, AUTODIG)  
11. 236-2526 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
  7K-1181 [1] STRAP-CABLE  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  180-0050 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS & WEDGE)
12. 5C-2890 M [2] NUT (M6X1-THD)  
13. 6R-7653 M [2] SCREW (M6X1X15-MM)  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
18. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-4970 M [2] BOLT (M6X1X14-MM)  
20. 9X-2038 [4] WASHER (7X19X2-MM THK)  
21. 9X-2044 M [16] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5P-6120 D TRIM-EDGE (0.4-M)  
22A. 5P-6120 D TRIM-EDGE (0.115-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 962G II :

CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC
CONDENSER & MTG GP-REFRIGERANT
209-5806 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
216-9818 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
187-8441 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
204-4489 CANOPY AR-OPEN ROPS
185-7632 CAB AR
ARMREST GP
188-9820 ARMREST GP
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
213-6015 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
218-3833 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0208 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0208 CONTROL GP-ELECTROHYDRAULIC

Truck sale:

CATERPILLAR 962GII 2003
 
CATERPILLAR 962GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
PATTEN INDUSTRIES
United States
CATERPILLAR 962GII 2004
 
CATERPILLAR 962GII 2004
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 962GII 2005
 
CATERPILLAR 962GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FOLEY EQUIPMENT CO. (KS/MO)
1550 S. West Street - Wichita - Kansas
 
 
CATERPILLAR 962G II 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
2002 CAT 962G II
Call 
2002 CAT 962G II

Smeets & Zonen
Peer, BELGIUM, Belgium
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.