207-8618 WIRING GP-CAB S/N BAB445-UP PART OF 203-9835 CANOPY AR-OPEN ROPS 962G II WHEEL LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 207-8618 WIRING GP-
1. 224-4767 WIRING GP-
2. 250-3754 WIRING GP-
3. 190-5096 WIRING GP-
4. 190-5096 WIRING GP-
5. 190-5096 WIRING GP-
6. 190-5096 WIRING GP-
7. 191-6802 WIRING GP-
8. 209-0767 WIRING GP-
9. 190-5038 WIRING GP-
0. INFORMATION

WHEEL LOADER 962G II WHEEL LOADER BAB
962G II Wheel Loader BAB00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3285 962G II BAB (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

207-8618 WIRING GP-CAB

224-4767 WIRING GP-CAB

250-3754 WIRING GP-CAB

190-5096 WIRING GP-CHASSIS

#SEBP32850340

207-8618: WIRING GP-CAB

WIRING GP-CAB

207-8618 WIRING GP-CAB
S/N BAB445-UP
PART OF 203-9835 CANOPY AR-OPEN ROPS

i01974745 SEBP3285

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-0109	[15]	PLUG (ROCKER SWITCH)
2.	3E-5239 C	[3]	RELAY AS (24-VOLT)
3.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
4.	3E-6389 Y	[2]	LAMP GP-DOME (24-VOLT)
5.	3S-2093 C	[22]	STRAP-CABLE
6.	4V-4164	[8]	BUSHING-TERMINAL
7.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
8.	6V-8369	[2]	NUT (7/16-28-THD)
9.	7K-1181 C	[22]	STRAP-CABLE
10.	7N-5876	[4]	LAMP (24-VOLT, 0.2-AMPERE)(CLEAR)
11.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
12.	8T-8737 C	[43]	PLUG-SEAL
13.	8T-9655	[8]	MOUNT-ISOLATION
14.	8X-5804	[1]	STRAP AS-GROUND
15.	9F-8125	[8]	LOCKWASHER
16.	9W-1441	[2]	FUSE (15-AMPERE)
17.	9W-1442	[29]	FUSE (10-AMPERE)
18.	9W-1446	[1]	FUSE (20-AMPERE)
19.	098-8968	[8]	WASHER (5X16X1.2-MM THK)
20.	103-5526 Y	[1]	CONTROL GP-MONITOR (BACKLIGHT DIMMER)
21.	108-3320	[1]	SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING,FLOOD,PANEL,TAIL LIGHT)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
22.	110-6109	[3]	KNOB-CONTROL (CONTROL PANEL SWITCHES)
23.	110-7887	[1]	SWITCH AS-START (KEY)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
24.	117-2311	[1]	SOCKET-AUXILIARY POWER (12-VOLT)
25.	121-8038	[1]	RECEPTACLE AS (AUXILIARY)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
26.	123-2896	[1]	GASKET
27.	147-3150	[1]	ANGLE AS
28.	154-7443	[1]	CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM)
29.		[2]	WIRE AS
30.	166-6928 Y	[1]	MODULE GP-QUAD GAUGE
31.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED
32.	173-2234	[1]	PLATE AS
33.	173-2235	[1]	PLATE AS
34.	173-2236	[1]	PLATE AS
35.	177-3187	[1]	PLATE
36.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(AUTOSHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
36A.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
37.	197-4840	[1]	HARNESS AS-LIGHTING (FRONT FLOODLIGHTS)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
38.	197-4845	[1]	HARNESS AS-WIRING (SERVICE TOOL)
	8T-8737	[7]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
39.	198-6570	[1]	LIGHTER GP (12-VOLT)
	198-6571	[1]	ELEMENT AS-HEATER (12-VOLT)(CAB LIGHTER)
40.	202-9803	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, RH)
	1S-9593	[1]	STRAP-CABLE
	3E-5180	[1]	WEDGE-RECEPTACLE LOCK (12-PIN)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
41.	202-9804	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, LH)
	1S-9593	[1]	STRAP-CABLE
	3E-5180	[1]	WEDGE-RECEPTACLE LOCK (12-PIN)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
42.	202-9805	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, CENTER)(CENTER INDICATOR PANEL)
	1S-9593	[1]	STRAP-CABLE
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	186-3735	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
43.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
44.	219-9530	[1]	SWITCH AS-ROCKER (TMSN NEUTRALIZER OVERRIDE CONT)
45.	220-8358	[1]	SWITCH AS-ROCKER (24-VOLT)(MODE SELECT)
46.	228-4430 C	[1]	HARNESS AS-CAB (MAIN)
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8805	[3]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
	197-7565	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS. & WEDGE)
	110-6844	[1]	SEAL
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-7996	[12]	PLUG-CONNECTOR (6-PIN)
	3T-3278	[4]	BOOT
	7G-7919	[2]	PLUG-SEAL
	8N-1535	[1]	BELL AS-END
	8N-1532	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	8T-8737	[199]	PLUG-SEAL
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	9X-7148	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2255	[6]	KIT-CONNECTING PLUG (12-PIN)
	155-2256	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[7]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[4]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[13]	KIT-CONNECTING PLUG (6-PIN)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	188-6253	[1]	BLOCK GP-JUNCTION
47.	228-6087 C	[1]	HARNESS AS-OPERATOR CONTROLS
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[6]	PLUG-SEAL
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
48.	099-3649 M	[4]	BOLT (M8X1.25X40-MM)
49.	130-5300 C	[4]	CLIP
50.	132-5789 C	[2]	CLIP (LADDER)
51.	149-7738	[1]	CLIP (LOOP)
52.	156-6175 C	[1]	CLIP (LADDER)
53.	2H-3920 C	[4]	LOCKWASHER
54.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
55.	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
56.	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
57.	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
58.	4B-2049	[8]	NUT (10-32-THD)
59.	4P-7581 C	[2]	CLIP (LADDER)
60.	4S-1962	[1]	CLIP (LOOP)
61.	5C-7261 M	[2]	NUT (M8X1.25-THD)
62.	5C-8312 M	[4]	NUT (M4X0.7-THD)
63.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
64.	6D-1641	[1]	CLIP (LOOP)
65.	6D-6146	[4]	SCREW-MACHINE (10-32X1.25-IN)
66.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(SEAT AIR COMPRESSOR)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
67.	6V-1889	[1]	CLIP (LOOP)
68.	6V-2687	[16]	SCREW-PAN HEAD (10-24X1-IN)
69.	6V-5645	[4]	SCREW-MACHINE (10-32X0.87-IN)
70.	6V-9673 M	[3]	SCREW-MACHINE (M5X0.8X12-MM)
71.	8T-0337 M	[4]	SCREW-MACHINE (M4X0.7X12-MM)
72.	8T-4121	[17]	WASHER-HARD (11X21X2.5-MM THK)
73.	8T-4137 CM	[10]	BOLT (M10X1.5X20-MM)
74.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
75.	8T-4191 M	[7]	BOLT (M10X1.5X16-MM)
76.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
77.	8T-4205 C	[7]	WASHER-HARD (7.2X14.5X2-MM THK)
78.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
79.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
80.	8T-4244 M	[5]	NUT (M12X1.75-THD)
81.	8T-4970 CM	[5]	BOLT (M6X1X14-MM)
82.	9M-5870	[4]	GROMMET
83.	9M-8406 C	[1]	CLIP (LOOP)
84.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
85.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
86.	9X-2480 M	[2]	BOLT (M6X1X45-MM)
87.	9X-6165 C	[1]	WASHER (6.5X22X2.5-MM THK)
88.	9X-8256 C	[1]	WASHER (6.6X12X2-MM THK)
89.	9X-8486	[2]	SCREW-MACHINE (8-32X0.75-IN)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP32850341

224-4767: WIRING GP-CAB

WIRING GP-CAB

224-4767 WIRING GP-CAB -CUSTOM
S/N BAB1-UP
PART OF 254-3536 LUBRICATION AR-AUTOMATIC

i01859547 SEBP3285

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
224-4766 Y	[1]	LAMP GP-SIGNAL (CAB DISPLAY)
224-3837	[1]	HARNESS AS-CAB
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS & WEDGE)
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
3E-5136	[1]	RECEPTACLE AS-CONNECTOR (5-PIN)
169-9016 M	[4]	NUT (M2.5X0.45-THD)
6K-3274	[4]	PLATE-RIVET
6V-8672 M	[4]	SCREW-MACHINE (M2.5X0.45X16-MM)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP32850342

250-3754: WIRING GP-CAB

WIRING GP-CAB

250-3754 WIRING GP-CAB
S/N BAB1-UP
PART OF 250-3732 CAB AR-ENCLOSED ROPS

i02105264 SEBP3285

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[3]	RELAY AS (24-VOLT)
2.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
3.	3E-6389 Y	[2]	LAMP GP-DOME (24-VOLT)
4.	3S-2093	[20]	STRAP-CABLE
5.	4P-8525	[8]	SPACER (9X16X30-MM THK)
6.	4V-4164	[16]	BUSHING-TERMINAL
7.	6I-1418	[8]	SPACER (8.2X12.7X28.7-MM THK)
8.	6V-8369	[2]	NUT (7/16-28-THD)
9.	7K-1181	[26]	STRAP-CABLE
10.	7N-5876	[4]	LAMP (24-VOLT, 0.2-AMPERE)
11.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
12.	8T-9655	[16]	MOUNT-ISOLATION
13.	8X-5804	[1]	STRAP AS-GROUND
14.	9F-8125	[16]	LOCKWASHER
15.	9W-1441	[3]	FUSE (15-AMPERE)
16.	9W-1442	[27]	FUSE (10-AMPERE)
17.	9W-1446	[2]	FUSE (20-AMPERE)
18.	098-8968	[16]	WASHER (5X16X1.2-MM THK)
19.	103-5526 Y	[1]	CONTROL GP-MONITOR (BACKLIGHT DIMMER)
20.	108-3320	[1]	SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING,FLOOD,PANEL,TAIL LIGHT)
	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
21.	110-6109	[6]	KNOB-CONTROL (CONTROL PANEL SWITCHES)
22.	110-7886	[1]	SWITCH AS-WIPER (24-VOLT)(FRONT INTERMITTENT)
	2H-3920	[1]	LOCKWASHER
	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	6V-8369	[1]	NUT (7/16-28-THD)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
23.	110-7887	[1]	SWITCH AS-START (KEY)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
24.	112-6174	[1]	SWITCH GP-ROTARY (WIPER, WASHER)(REAR WIPER)
	2H-3920	[1]	LOCKWASHER
	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	6V-8369	[1]	NUT (7/16-28-THD)
	186-3735	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
25.	117-2311	[1]	SOCKET-AUXILIARY POWER (12-VOLT)
26.	121-8038	[1]	RECEPTACLE AS (AUXILIARY)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
27.	123-2896	[1]	GASKET
28.	127-4540	[1]	POTENTIOMETER AS (TEMPERATURE SELECT)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	236-8722	[1]	WASHER (10.5X22.2X1.6-MM THK)
29.	154-7443 Y	[1]	CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM)
30.	166-6928 Y	[1]	MODULE GP-QUAD GAUGE
31.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
32.	172-9391 Y	[1]	CONTROL GP-UNPROGRAMMED (IMPLEMENT)
33.	173-2234	[1]	PLATE AS
34.	173-2235	[1]	PLATE AS
35.	173-2236	[1]	PLATE AS
36.	177-3187	[1]	PLATE
37.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL)
38.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(AUTOSHIFT CONTROL)
			(EACH INCLUDES)
	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
39.	197-4840	[1]	HARNESS AS-LIGHTING (FRONT FLOODLIGHTS)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
40.	197-4845	[1]	HARNESS AS-WIRING (SERVICE TOOL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
41.	198-6570	[1]	LIGHTER GP (12-VOLT)
	198-6571	[1]	ELEMENT AS-HEATER (12-VOLT)
42.	202-9803	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, RH)
	1S-9593	[1]	STRAP-CABLE
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
43.	202-9804	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, LH)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	1S-9593	[1]	STRAP-CABLE
44.	202-9805	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, CENTER)
	1S-9593	[1]	STRAP-CABLE
	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
45.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
46.	236-4631	[20]	BEZEL
47.	242-6099	[1]	CLIP (LOOP)
48.	249-5602	[2]	GUARD-SWITCH
49.	251-1508	[1]	HARNESS AS-CAB (MAIN, EH/HMU)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8805	[5]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[3]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	110-6844	[4]	SEAL
	8N-1532	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	8N-1535	[1]	BELL AS-END
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	9X-6772	[1]	STRAP-CABLE
	9X-7148	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	155-2255	[5]	KIT-CONNECTING PLUG (12-PIN)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[7]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[4]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[15]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	171-5349	[3]	STRAP-MARKER
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	185-1861	[98]	SEAL-WIRE
	188-6253	[1]	BLOCK GP-JUNCTION
	197-7565	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
50.	251-1509	[1]	HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	185-1861	[7]	SEAL-WIRE
51.	255-8650	[1]	HARNESS AS-OPERATOR CONTROLS (TRANSMISSION CONTROL)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
52.	130-5300	[1]	CLIP
53.	132-5789	[3]	CLIP (LADDER)
54.	149-7738	[1]	CLIP (LOOP)
55.	156-6175	[1]	CLIP (LADDER)
56.	228-6089	[13]	PLUG (ROCKER SWITCH)
57.	236-4608	[1]	SWITCH AS-ROCKER (MODE SELECT)
58.	236-4609	[1]	SWITCH AS-ROCKER (TMSN NEUTRALIZER OVERRIDE)
59.	236-4610	[1]	SWITCH AS-ROCKER (AIR CONDITIONER, HEATER)(A/C, HEATER SELECT)
60.	236-4611	[1]	SWITCH AS-ROCKER (FAN BLOWER SPEED)
61.	236-4619	[1]	SWITCH AS-ROCKER (LIFT, TILT KICKOUT)
62.	236-4622	[1]	SWITCH AS-ROCKER (FINE MODULATION)
63.	251-1197	[1]	SWITCH AS-ROCKER (HYDRAULIC LOCKOUT)
64.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
65.	2H-3920	[6]	LOCKWASHER
66.	4B-2049	[16]	NUT (10-32-THD)
67.	4D-7388	[1]	CLIP (LOOP)
68.	4P-7581	[1]	CLIP (LADDER)
69.	4S-1962	[1]	CLIP (LOOP)
70.	5C-7261 M	[2]	NUT (M8X1.25-THD)
71.	5C-8312 M	[4]	NUT (M4X0.7-THD)
72.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
73.	6D-1641	[1]	CLIP (LOOP)
74.	6D-6146	[8]	SCREW-MACHINE (10-32X1.25-IN)
75.	6V-1889	[1]	CLIP (LOOP)
76.	6V-2687	[16]	SCREW-PAN HEAD (10-24X1-IN)
77.	6V-5645	[4]	SCREW-MACHINE (10-32X0.87-IN)
78.	6V-9673 M	[3]	SCREW-MACHINE (M5X0.8X12-MM)
79.	8T-0337 M	[4]	SCREW-MACHINE (M4X0.7X12-MM)
80.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
81.	8T-4133 M	[1]	NUT (M10X1.5-THD)
82.	8T-4137 M	[9]	BOLT (M10X1.5X20-MM)
83.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
84.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
85.	8T-4191 M	[5]	BOLT (M10X1.5X16-MM)
86.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
87.	8T-4205	[7]	WASHER-HARD (7.2X14.5X2-MM THK)
88.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
89.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
90.	8T-4244 M	[5]	NUT (M12X1.75-THD)
91.	8T-4970 M	[5]	BOLT (M6X1X14-MM)
92.	8T-6870 M	[8]	BOLT (M8X1.25X70-MM)
93.	9M-5870	[8]	GROMMET
94.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
95.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
96.	9X-2480 M	[2]	BOLT (M6X1X45-MM)
97.	9X-6165	[1]	WASHER (6.5X22X2.5-MM THK)
98.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
99.	7X-7877 E		STRIP-EDGE (25-CM)
99A.	7X-7877 E		STRIP-EDGE (8-CM)
99B.	7X-7877 E		STRIP-EDGE (17-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP32850343

190-5096: WIRING GP-CHASSIS

WIRING GP-CHASSIS

190-5096 WIRING GP-CHASSIS
S/N BAB1-365
PART OF 186-3549, 217-0914 ELECTRICAL AR

i01477626 SEBP3285

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[14]	STRAP-CABLE
3.	4H-1225	[3]	WASHER (11X22X6-MM THK)
4.	7K-1181	[2]	STRAP-CABLE
5.	118-7226	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	9X-1813 E		SLEEVE (33CM)
6.	123-2993	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
8.	136-3937	[1]	SHEET
9.	136-4129	[1]	BRACKET
10.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
11.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
12.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	188-6185	[2]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	190-5098 Y	[1]	PANEL GP-CIRCUIT BREAKER
17.	209-8697	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[11]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	8T-8737	[47]	PLUG-SEAL
	7K-1181	[1]	STRAP-CABLE
	9X-6772	[2]	STRAP-CABLE
18.	209-8699	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK)
	8T-8737	[7]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
19.	033-8248	[1]	CLIP (LOOP)
20.	130-5300	[12]	CLIP
21.	164-4227	[1]	CLIP
22.	1M-4543	[1]	GROMMET
23.	1S-0994	[3]	CLIP (LOOP)
24.	2M-3433	[2]	GROMMET
25.	2M-9780	[1]	SEAL-O-RING
26.	3J-1907	[3]	SEAL-O-RING
27.	4D-7388	[1]	CLIP (LOOP)
28.	4K-8864	[2]	CLIP (LOOP)
29.	4P-7581	[1]	CLIP (LADDER)
30.	4P-8134	[1]	CLIP (LADDER)
31.	4S-1962	[2]	CLIP (LOOP)
32.	4S-4455	[1]	CLIP
33.	5C-8312 M	[4]	NUT (M4X0.7-THD)
34.	6D-4244	[8]	CLIP (LOOP)
35.	6D-4246	[3]	CLIP (LOOP)
36.	6V-1889	[4]	CLIP (LOOP)
37.	7D-7233	[1]	CLIP (LOOP)
38.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
39.	8T-4121	[42]	WASHER-HARD (11X21X2.5-MM THK)
40.	8T-4133 M	[8]	NUT (M10X1.5-THD)
41.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
42.	8T-4137 M	[28]	BOLT (M10X1.5X20-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4244 M	[1]	NUT (M12X1.75-THD)
46.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
47.	9M-8406	[2]	CLIP (LOOP)
48.	8M-2770	[3]	CLIP (LOOP)
49.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
50.	4D-7794	[1]	CLIP
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32850344

190-5096: WIRING GP-CHASSIS

WIRING GP-CHASSIS

190-5096 WIRING GP-CHASSIS
S/N BAB366-479
PART OF 217-0914 ELECTRICAL AR

i01912584 SEBP3285

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[14]	STRAP-CABLE
3.	3D-9872	[2]	PLUG-BUTTON
4.	7K-1181	[3]	STRAP-CABLE
5.	118-7226 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
6.	123-2993	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
7.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
8.	136-3937	[1]	SHEET
9.	136-4129	[1]	BRACKET
10.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
11.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
12.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	188-6185	[2]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	190-5098 Y	[1]	PANEL GP-CIRCUIT BREAKER
17.	209-8697	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[11]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	8T-8737	[47]	PLUG-SEAL
	7K-1181	[1]	STRAP-CABLE
	9X-6772	[2]	STRAP-CABLE
18.	209-8699	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK)
	8T-8737	[7]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
19.	033-8248	[1]	CLIP (LOOP)
20.	130-5300	[13]	CLIP
21.	164-4227	[1]	CLIP
22.	5F-9757	[1]	GROMMET
23.	1S-0994	[3]	CLIP (LOOP)
24.	2M-3433	[2]	GROMMET
25.	2M-9780	[1]	SEAL-O-RING
26.	3J-1907	[3]	SEAL-O-RING
27.	4D-7388	[1]	CLIP (LOOP)
28.	4K-8864	[2]	CLIP (LOOP)
29.	4P-7581	[1]	CLIP (LADDER)
30.	4P-8134	[1]	CLIP (LADDER)
31.	4S-1962	[2]	CLIP (LOOP)
32.	4S-4455	[1]	CLIP
33.	5C-8312 M	[4]	NUT (M4X0.7-THD)
34.	6D-4244	[8]	CLIP (LOOP)
35.	6D-4246	[3]	CLIP (LOOP)
36.	6V-1889	[4]	CLIP (LOOP)
37.	7D-7233	[1]	CLIP (LOOP)
38.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
39.	8T-4121	[42]	WASHER-HARD (11X21X2.5-MM THK)
40.	8T-4133 M	[8]	NUT (M10X1.5-THD)
41.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
42.	8T-4137 M	[28]	BOLT (M10X1.5X20-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4244 M	[1]	NUT (M12X1.75-THD)
46.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
47.	9M-8406	[2]	CLIP (LOOP)
48.	8M-2770	[3]	CLIP (LOOP)
49.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
50.	4D-7794	[1]	CLIP
51.	4H-1225	[3]	WASHER (11X22X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32850345

190-5096: WIRING GP-CHASSIS

WIRING GP-CHASSIS

190-5096 WIRING GP-CHASSIS
S/N BAB480-UP
PART OF 217-0914 ELECTRICAL AR
Type 1

i01965921 SEBP3285

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093 C	[15]	STRAP-CABLE
3.	3D-9872	[2]	PLUG-BUTTON
4.	7K-1181	[3]	STRAP-CABLE
5.	134-2252 CY	[1]	SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC OIL)
6.	172-8660 CY	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
7.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
8.	136-3937	[1]	SHEET
9.	136-4129	[1]	BRACKET
10.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
11.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
12.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	188-6185	[2]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	190-5098 Y	[1]	PANEL GP-CIRCUIT BREAKER
17.	234-0620 C	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[11]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	8T-8737	[47]	PLUG-SEAL
	7K-1181	[1]	STRAP-CABLE
	9X-6772	[2]	STRAP-CABLE
18.	209-8699	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK)
	8T-8737	[7]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
19.	033-8248	[1]	CLIP (LOOP)
20.	130-5300	[13]	CLIP
21.	164-4227	[1]	CLIP
22.	5F-9757	[1]	GROMMET
23.	1S-0994	[3]	CLIP (LOOP)
24.	2M-3433	[2]	GROMMET
25.	2M-9780	[1]	SEAL-O-RING
26.	3J-1907	[3]	SEAL-O-RING
27.	4D-7388	[1]	CLIP (LOOP)
28.	4K-8864	[2]	CLIP (LOOP)
29.	4P-7581	[1]	CLIP (LADDER)
30.	4P-8134	[1]	CLIP (LADDER)
31.	4S-1962	[2]	CLIP (LOOP)
32.	4S-4455	[1]	CLIP
33.	5C-8312 M	[4]	NUT (M4X0.7-THD)
34.	6D-4244	[8]	CLIP (LOOP)
35.	6D-4246	[3]	CLIP (LOOP)
36.	6V-1889	[4]	CLIP (LOOP)
37.	7D-7233	[1]	CLIP (LOOP)
38.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
39.	8T-4121	[42]	WASHER-HARD (11X21X2.5-MM THK)
40.	8T-4133 M	[8]	NUT (M10X1.5-THD)
41.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
42.	8T-4137 M	[28]	BOLT (M10X1.5X20-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4244 M	[1]	NUT (M12X1.75-THD)
46.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
47.	9M-8406	[2]	CLIP (LOOP)
48.	8M-2770	[3]	CLIP (LOOP)
49.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
50.	4D-7794	[1]	CLIP
51.	4H-1225	[3]	WASHER (11X22X6-MM THK)
52.	132-5789 C	[1]	CLIP (LADDER)
53.	7N-3718 C	[2]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32850346

190-5096: WIRING GP-CHASSIS

WIRING GP-CHASSIS

190-5096 WIRING GP-CHASSIS
S/N BAB480-UP
PART OF 217-0914 ELECTRICAL AR
Type 2

i02088118 SEBP3285

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[15]	STRAP-CABLE
3.	3D-9872	[2]	PLUG-BUTTON
4.	7K-1181	[4]	STRAP-CABLE
5.	134-2252 Y	[1]	SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC OIL)
6.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
7.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
8.	136-3937	[1]	SHEET
9.	136-4129	[1]	BRACKET
10.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
11.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	188-6185	[2]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	190-5098 Y	[1]	PANEL GP-CIRCUIT BREAKER
17.	241-7878 C	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	7G-7917	[11]	PLUG-SEAL
	7G-7918	[4]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	155-2252	[1]	PLUG AS-CONNECTOR (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1521	[1]	BELL AS-END
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
18.	209-8699	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK)
	8T-8737	[7]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
19.	033-8248	[1]	CLIP (LOOP)
20.	130-5300	[13]	CLIP
21.	164-4227	[1]	CLIP
22.	5F-9757	[1]	GROMMET
23.	1S-0994	[3]	CLIP (LOOP)
24.	2M-3433	[2]	GROMMET
25.	2M-9780	[1]	SEAL-O-RING
26.	3J-1907	[3]	SEAL-O-RING
27.	4D-7388	[1]	CLIP (LOOP)
28.	4K-8864	[2]	CLIP (LOOP)
29.	4P-7581	[1]	CLIP (LADDER)
30.	4P-8134	[1]	CLIP (LADDER)
31.	4S-1962	[2]	CLIP (LOOP)
32.	4S-4455	[1]	CLIP
33.	5C-8312 M	[4]	NUT (M4X0.7-THD)
34.	6D-4244	[8]	CLIP (LOOP)
35.	6D-4246	[3]	CLIP (LOOP)
36.	6V-1889	[4]	CLIP (LOOP)
37.	7D-7233	[1]	CLIP (LOOP)
38.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
39.	8T-4121	[42]	WASHER-HARD (11X21X2.5-MM THK)
40.	8T-4133 M	[8]	NUT (M10X1.5-THD)
41.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
42.	8T-4137 M	[28]	BOLT (M10X1.5X20-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4244 M	[1]	NUT (M12X1.75-THD)
46.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
47.	9M-8406	[2]	CLIP (LOOP)
48.	8M-2770	[3]	CLIP (LOOP)
49.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
50.	4D-7794	[1]	CLIP
51.	4H-1225	[3]	WASHER (11X22X6-MM THK)
52.	132-5789	[1]	CLIP (LADDER)
53.	7N-3718	[2]	CLIP
54.	218-4935	[1]	SUPPRESSOR-ARC
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32850347

191-6802: WIRING GP-ELECTRIC CLUTCH

WIRING GP-ELECTRIC CLUTCH

191-6802 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N BAB1-UP
PART OF 191-3314 COOLER & MTG AR-AXLE OIL

i01481349 SEBP3285

1916802 WIRING GP-ELECTRIC CLUTCH Parts scheme

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	155-8998	[1]	SWITCH AS-TEMPERATURE (AXLE OIL COOLER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	224-8889	[1]	HARNESS AS-SENSOR (COOLER PUMP CLUTCH SWITCH)
	155-2269	[1]	PLUG AS-CONNECTOR (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
4.	224-8888	[1]	HARNESS AS-CONTROL (COOLER PUMP CLUTCH)
	155-2269	[1]	PLUG AS-CONNECTOR (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
5.	130-5300	[1]	CLIP
6.	4D-7794	[1]	CLIP
8.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
11.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
	M		METRIC PART

#SEBP32850348

209-0767: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

209-0767 WIRING GP-ELECTROHYDRAULIC
S/N BAB1-UP
PART OF 208-0834, 208-0835 VALVE & MTG GP-MAIN CONTROL

i01912745 SEBP3285

2090767 WIRING GP-ELECTROHYDRAULIC Parts scheme

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	091-9035	[1]	SPACER (11X25X20-MM THK)
3.	224-5873	[1]	HARNESS AS-VALVE (OIL MANIFOLD, E/H CONTROL)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES RECEPTACLE & WEDGE)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES RECEPTACLE & WEDGE)
4.	4S-1936	[2]	CLIP
5.	8M-2770	[2]	CLIP (LOOP)
6.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
8.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
	M		METRIC PART

#SEBP32850349

190-5038: WIRING GP-ENGINE

WIRING GP-ENGINE

190-5038 WIRING GP-ENGINE
S/N TX61-UP; BMA1-UP; 5GG9431-UP
HIGH SIDE ACTIVATION OF AIR INLET HEATER RELAY
PART OF 184-2632, 216-0850, 276-7024 ENGINE AR-COMPLETE

i01488493 SEBP3285

For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	105-1797	[6]	MOUNT
3.	153-8920	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	6N-7523	[1]	WASHER (6.48X11.9X1.57-MM THK)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	135-5975	[1]	GROMMET-WIRING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
4.	156-6175	[2]	CLIP (LADDER)
5.	195-7336 Y	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
6.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
7.	113-8690	[1]	WASHER (11.1X37.9X3.3-MM THK)
8.	7X-7729	[1]	WASHER (11X25X3-MM THK)
9.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
10.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
11.	156-9890	[1]	WASHER (9X30X4-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Specifications

Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Testing and Adjusting

Electric Starting System - Test
3126B Engines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engine for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3126B Engine for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines

How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines

CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Air Inlet Heater Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Shutdown Switch Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Air Inlet Heater Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Wiring Information
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21