176-1167 WIRING GP-CONSOLE S/N DCW1-UP PART OF 173-0348 OPERATOR AR 345B II EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 176-1167 WIRING GP-
1. 234-1987 WIRING GP-
2. 128-8911 WIRING GP-
3. 174-6824 WIRING GP-
4. 209-8261 WIRING GP-
5. 125-4858 WIRING GP-
6. 117-2760 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

7. 169-5543 DRIVE GP-F
8. 200-3502 DRIVE GP-F

POWER TRAIN AR

9. 169-5525 POWER TRAI
0. INFORMATION

EXCAVATOR 345B II EXCAVATOR DCW
345B Series II Excavator DCW00001-UP (MACHINE) POWERED BY 3176 Engine SEBP3291 345B II DCW (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

125-4854 WIRING GP-CONSOLE

125-4855 WIRING GP-CONSOLE

176-1167 WIRING GP-CONSOLE

234-1987 WIRING GP-CONSOLE

128-8911 WIRING GP-COUNTERWEIGHT

174-6824 WIRING GP-ELECTRONIC CONTROL

#SEBP32910200

176-1167: WIRING GP-CONSOLE

WIRING GP-CONSOLE

176-1167 WIRING GP-CONSOLE
S/N DCW1-UP
PART OF 173-0348 OPERATOR AR

i02277796 SEBP3291

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
234-1987 Y	[1]	WIRING GP-CONSOLE (LH)
125-4855 Y	[1]	WIRING GP-CONSOLE (RH)
Y		SEPARATE ILLUSTRATION

#SEBP32910201

234-1987: WIRING GP-CONSOLE

WIRING GP-CONSOLE

234-1987 WIRING GP-CONSOLE
S/N DCW315-UP
PART OF 176-1167 WIRING GP-CONSOLE

i02250980 SEBP3291

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-5026	[8]	SCREW-PAN HEAD (10-16X0.63-IN)
2.	134-4430	[1]	CABLE AS-COAXIAL
3.	9W-1442	[20]	FUSE (10-AMPERE)
4.	9W-1441	[7]	FUSE (15-AMPERE)
5.	7Y-5493	[1]	TOOL (FUSE PULLER)
6.	111-4799	[1]	SWITCH AS-LIMIT (NEUTRAL START)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	5P-5998	[3]	TUBE
7.	120-9027 M	[2]	SCREW-PAN HEAD (M3X0.5X16-MM)
8.	096-5962	[2]	WASHER-HARD (3.4X7X0.8-MM THK)
9.	116-0082	[2]	STRAP
10.	125-4726	[1]	CLIP
11.	3S-2093	[1]	STRAP-CABLE
12.	234-1387	[1]	HARNESS AS-CONSOLE
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[13]	STRAP-CABLE
	111-4812	[1]	BASE
13.	117-6259	[2]	ANGLE
14.	163-6708	[1]	RADIO GP (AM/FM)
15.	106-2704 M	[4]	SCREW AS (M5X0.8X10-MM)
	M		METRIC PART

#SEBP32910202

128-8911: WIRING GP-COUNTERWEIGHT

WIRING GP-COUNTERWEIGHT

128-8911 WIRING GP-COUNTERWEIGHT
S/N DCW1-UP
PART OF 205-7750 COUNTERWEIGHT AR
AN ATTACHMENT

i00522155 SEBP3291

1288911 WIRING GP-COUNTERWEIGHT Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	128-8912	[1]	HARNESS AS
2.	3S-2093	[148]	STRAP-CABLE
3.	114-0421	[1]	SWITCH AS-TOGGLE (CTWT REMOVAL)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
4.	132-1854	[1]	BRACKET
5.	6V-9673 M	[2]	SCREW-MACHINE (M5X0.8X12-MM)
6.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
7.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
8.	116-0118	[1]	CLIP
9.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART

#SEBP32910203

174-6824: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

174-6824 WIRING GP-ELECTRONIC CONTROL
S/N 7ZR6112-UP
PART OF 163-5639 ENGINE AR-CORE

i01138815 SEBP3291

1746824 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8L-2786	[2]	SEAL-O-RING
2.	107-8618	[1]	SENSOR GP-TEMPERATURE (MANIFOLD AIR INLET)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	112-4550 BE		SLEEVE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	3S-2093	[4]	STRAP-CABLE
4.	6V-6609	[1]	SEAL-O-RING
5.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(FUEL)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 BE		SLEEVE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
5A.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(COOLANT)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 BE		SLEEVE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	265-9033 Y	[1]	SENSOR GP-SPEED (TIMING)
7.	8J-1256	[1]	CLIP (LOOP)
8.	3E-2332	[1]	ELBOW
9.	6V-5049	[2]	SEAL-O-RING
10.	3K-0360	[1]	SEAL-O-RING
11.	194-6722 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
12.	3J-7354	[3]	SEAL-O-RING
13.	3E-7448	[1]	CONNECTOR
14.	161-9927 Y	[1]	SENSOR GP-PRESSURE (TURBO OUTLET)
15.	6V-8214 M	[2]	BOLT (M6X1X20-MM)
16.	2V-3216	[1]	CLIP
17.	4P-8134	[1]	CLIP (LADDER)
18.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
19.	8M-2773	[1]	CLIP (LOOP)
20.	161-9930 Y	[1]	SENSOR GP-PRESSURE (OIL)
20A.	161-9930 Y	[1]	SENSOR GP-PRESSURE (FUEL)
21.	206-5016	[1]	HARNESS AS-ENGINE
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8802		KIT-RECEPTACLE (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8803	[6]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS & WEDGE)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
			(INCLUDES PLUG AS & WEDGE)
	110-6844	[1]	SEAL
22.	4K-8864	[2]	CLIP (LOOP)
23.	9X-0262	[1]	ADAPTER
24.	6V-5048	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32910204

209-8261: WIRING GP-FAN

WIRING GP-FAN

209-8261 WIRING GP-FAN
S/N DCW1-UP
PART OF 204-0672 FAN AR-REVERSIBLE
AN ATTACHMENT

i01655120 SEBP3291

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	099-3649 M	[3]	BOLT (M8X1.25X40-MM)
2.	9N-0869	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
3.	155-0576	[6]	MOUNT-ISOLATION
4.	6I-1418	[3]	SPACER (8.2X12.7X28.7-MM THK)
5.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
6.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
7.	130-5300	[2]	CLIP
8.	070-0333	[1]	WIRE AS
9.	Y	[1]	CONTROL GP-MACHINE (HYDRAULIC FAN)
10.	209-8262	[1]	HARNESS AS-CONTROL
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11.	7K-1181	[10]	STRAP-CABLE
12.	209-8263	[1]	HARNESS AS-SWITCH
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
13.	4D-7794	[1]	CLIP
14.	209-8260	[1]	PLATE AS
15.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
16.	5P-1076	[2]	WASHER-HARD (13.5X30X4-MM THK)
17.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
18.	209-8264	[1]	BRACKET
19.	183-5133	[1]	SWITCH AS-ROCKER (AUTOMATIC REVERSING FAN)
	3E-8825	[1]	LAMP (24-VOLT)(AUTOMATIC REVERSING FAN)
	183-5135	[1]	ACTUATOR
	183-6312	[1]	SWITCH AS (AUTOMATIC REVERSING FAN)
20.	9X-2044 M	[3]	SCREW-TRUSS HEAD (M6X1X16-MM)
21.	9X-2038	[3]	WASHER (7X19X2-MM THK)
22.	5C-2890 M	[3]	NUT (M6X1-THD)
23.	3E-5239	[1]	RELAY AS (24-VOLT)(REVERSING FAN)
24.	223-4524	[1]	HARNESS AS-VALVE
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	3E-5519	[1]	PLUG AS-CONNECTOR (5-PIN)
25.	238-9776	[1]	COVER-DUCT
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32910205

125-4858: WIRING GP-FINE SWING

WIRING GP-FINE SWING

125-4858 WIRING GP-FINE SWING
S/N DCW1-UP
PART OF 126-2020 VALVE AR-SWING
AN ATTACHMENT

i01186406 SEBP3291

1254858 WIRING GP-FINE SWING Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	111-4788	[1]	SWITCH AS
	116-0173	[1]	CONNECTOR-RECEPTACLE
	116-0174	[5]	TERMINAL
3.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
4.	111-4837	[2]	CLIP
5.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
6.	132-1857	[1]	HARNESS AS
7.	7Y-8109	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8.	111-4836	[1]	CLIP
9.	4I-7889	[1]	SPACER (11X25X45-MM THK)
10.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART

#SEBP32910206

117-2760: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

117-2760 WIRING GP-UNIT INJECTOR
S/N 7ZR6112-UP
PART OF 163-5639 ENGINE AR-CORE

i00492735 SEBP3291

1172760 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-9537	[1]	HARNESS AS-WIRING (UNIT INJECTOR)
	103-8133		KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	2V-3216	[4]	CLIP
3.	7X-2468	[3]	CLIP
4.	7E-6508	[6]	CAP AS
5.	6V-8214 M	[9]	BOLT (M6X1X20-MM)
6.	5P-0537	[9]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART

#SEBP32910207

169-5543: DRIVE GP-FINAL

DRIVE GP-FINAL

169-5543 DRIVE GP-FINAL
S/N DCW1-UP
PART OF 169-5525 POWER TRAIN AR

i01143190 SEBP3291

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	200-3502 Y	[1]	DRIVE GP-FINAL
3.	165-9333 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP32910208

200-3502: DRIVE GP-FINAL

DRIVE GP-FINAL

200-3502 DRIVE GP-FINAL
S/N DCW1-UP
WITHOUT MOTOR
PART OF 169-5543 DRIVE GP-FINAL

i01589403 SEBP3291

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	200-3489	[1]	HOUSING-MOTOR
2.	205-9025	[1]	SEAL GP-DUO-CONE
3.	2R-0525	[2]	CUP-BEARING
4.	2R-0524	[2]	CONE-BEARING
5.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
6.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
7.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
8.	7Y-1469	[1]	COUPLING
9.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
10.	114-1541	[6]	PIN-DOWEL
11.	200-3490	[1]	HOUSING-GEAR
12.	7Y-1473	[1]	SHIM (0.3-MM THK)
	7Y-1476	[1]	SHIM (0.6-MM THK)
	7Y-1477	[1]	SHIM (0.7-MM THK)
	7Y-1478	[1]	SHIM (0.8-MM THK)
	7Y-1479	[1]	SHIM (1-MM THK)
17.	169-5560	[1]	GEAR-COUPLING (74-TEETH)
18.	8C-5240	[1]	SEAL-O-RING
19.	7Y-1482	[1]	CARRIER-PLANETARY
20.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
21.	110-7217	[2]	RING-RETAINING
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
24.	7Y-1487	[1]	GEAR-RING (85-TEETH)
25.	7M-8485	[2]	SEAL-O-RING
26.	3E-2338	[2]	PLUG-PIPE
27.	7Y-1488	[1]	CARRIER AS
27A.	7Y-0656	[3]	SHAFT-PLANETARY
28.	169-5559	[1]	GEAR-SUN (26-TEETH)
29.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
30.	094-1516	[3]	BEARING-ROLLER
31.	8T-4240	[3]	RING-RETAINING
32.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
33.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
34.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
35.	7Y-1498	[1]	COVER
36.	7Y-0661	[3]	SHAFT-PLANETARY
37.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
38.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
39.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
40.	1U-8846 B		SEALANT-GASKET
42.	7Y-1483	[1]	GEAR-RING (63-TEETH)
43.	7Y-0664	[11]	BEARING AS-ROLLER
44.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
45.	095-0891	[7]	PIN-SPRING
46.	7Y-0662	[4]	SHAFT-PLANETARY
47.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
48.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP32910209

169-5525: POWER TRAIN AR

POWER TRAIN AR

169-5525 POWER TRAIN AR
S/N DCW1-UP
PART OF 209-6674 GENERAL AR

i02305171 SEBP3291

For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
169-5528 Y	[1]	DRIVE GP-SWING (LH)
		S/N DCW1-332
227-6156 Y	[1]	DRIVE GP-SWING (LH)
		S/N DCW333-UP
169-5529 Y	[1]	DRIVE GP-SWING (RH)
		S/N DCW1-332
227-6157 Y	[1]	DRIVE GP-SWING (RH)
		S/N DCW333-UP
169-5527 Y	[1]	FASTENER GP-SWING & FINAL DR
169-5543 Y	[2]	DRIVE GP-FINAL
115-6399 Y	[2]	SPROCKET GP (NON-SEGMENTED)
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

CID 0091 FMI 02 Incorrect Throttle Switch inputs
3176C Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
3176C Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C Engines for Caterpillar Built Machines

CID 0264 FMI 08 Decel Throttle Position signal abnormal
3176C Engines for Caterpillar Built Machines

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
3176C Engines for Caterpillar Built Machines

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C Engines for Caterpillar Built Machines

Engine Wiring Information
3176C Engines for Caterpillar Built Machines

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
3176C Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C Engines for Caterpillar Built Machines

Decelerator Position Sensor Circuit - Test
3176C Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
3176C Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C Engines for Caterpillar Built Machines

CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
3176C Engines for Caterpillar Built Machines

CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3176C Engines for Caterpillar Built Machines

CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3176C Engines for Caterpillar Built Machines

CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
3176C Engines for Caterpillar Built Machines

CID 0545 FMI 06 Ether Start Relay short to ground
3176C Engines for Caterpillar Built Machines

CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C Engines for Caterpillar Built Machines

Wiring Information
3176C Engine for the R1600G and the R1700G Load Haul Dumps

Electrical Connectors - Inspect
3176C Engine for the R1600G and the R1700G Load Haul Dumps

Electrical Connectors
3176C Engine for the R1600G and the R1700G Load Haul Dumps

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 345B II :

125-4855 WIRING GP-CONSOLE

125-4854 WIRING GP-CONSOLE

149-7784 WIRING GP-COMBINED FLOW

234-1899 WIRING GP-CAB

134-3868 WIRING GP-CAB

174-0315 WIRING GP-AUXILIARY CONTROL

174-0299 WIRING GP-AUXILIARY CONTROL

141-5401 WIRING GP-AUXILIARY CONTROL

234-1987 WIRING GP-CONSOLE

128-8911 WIRING GP-COUNTERWEIGHT

174-6824 WIRING GP-ELECTRONIC CONTROL

209-8261 WIRING GP-FAN

125-4858 WIRING GP-FINE SWING

117-2760 WIRING GP-UNIT INJECTOR

169-5543 DRIVE GP-FINAL

200-3502 DRIVE GP-FINAL

Truck sale:

85,215

Caterpillar 345BIIL, Construction
- Crawler Excavators
AVESCO AG
Switzerland

100,561

Caterpillar 345BIIL, Construction
- Crawler Excavators
Parana Equipamentos S.A.
Brazil

Caterpillar 345BIIL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR SP. Z O.O.
Poland

56,000

Caterpillar 345BIIL, Construction
- Crawler Excavators
BUTLER MACHINERY COMPANY

CATERPILLAR 345BII 2003
- TRACK EXCAVATORS
WAGNER EQUIPMENT CO
United States