AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

191-3861 DRIVE GP-FINAL PART OF 191-3359 POWER TRAIN AR 305 MINI HYD EXCAVATOR


POWER TRAIN
DRIVE GP-FINAL
HYDRAULIC SYSTEM
MOTOR GP
POWER TRAIN
POWER TRAIN AR
SPROCKET GP
FRAME AND BODY
COUNTERWEIGHT GP
COVER GP

MINI HYD EXCAVATOR 305 MINI HYD EXCAVATOR DSA
 305CR Mini Hydraulic Excavator DSA00001-UP (MACHINE) POWERED BY K4N Engine SEBP3292 305 DSA   (2001)

POWER TRAIN

DRIVE GP-FINAL
DRIVE GP-FINAL
191-3861 DRIVE GP-FINAL
DRIVE GP-TRAVEL MOTOR & FINAL
191-1384 DRIVE GP-TRAVEL MOTOR & FINAL
 

#SEBP32920080
 

191-3861: DRIVE GP-FINAL

191-3861 DRIVE GP-FINAL
PART OF 191-3359 POWER TRAIN AR
i01613272 SEBP3292
1913861 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-1384 Y [2] DRIVE GP-TRAVEL MOTOR & FINAL  
2. 085-9768 M [18] BOLT (M14X2X40-MM)  
3. 7X-0510 [18] WASHER-HARD (15.5X29X3-MM THK)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32920081
 

191-1384: DRIVE GP-TRAVEL MOTOR & FINAL

191-1384 DRIVE GP-TRAVEL MOTOR & FINAL
PART OF 191-3861 DRIVE GP-FINAL
i01613342 SEBP3292
1911384 DRIVE GP-TRAVEL MOTOR & FINAL Parts scheme 1911384 DRIVE GP-TRAVEL MOTOR & FINAL Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-5005 [1] HUB  
2. 154-7864 [2] BOLT (M16X2X55-MM)  
3. 7X-2553 M [2] BOLT (M16X2X40-MM)  
4. 198-5013 [1] GEAR (14-TEETH)  
5. 198-5016 [1] COVER  
6. 198-5017 [28] PIN  
7. [1] RING  
8. 099-6521 B [2] SHIM (1.9-MM THK)  
  099-6522 B [2] SHIM (1.95-MM THK)  
  099-6523 B [2] SHIM (2-MM THK)  
  099-6524 B [2] SHIM (2.05-MM THK)  
  099-6543 B [2] SHIM (2.1-MM THK)  
  099-6544 B [2] SHIM (2.15-MM THK)  
  099-6545 B [2] SHIM (2.2-MM THK)  
  099-6546 B [2] SHIM (2.25-MM THK)  
  099-6547 B [2] SHIM (2.3-MM THK)  
  099-6548 B [2] SHIM (2.35-MM THK)  
  099-6549 B [2] SHIM (2.4-MM THK)  
  099-6550 B [2] SHIM (2.45-MM THK)  
  338-0183 B [2] RING  
  338-0184 B [2] RING  
  338-0185 B [2] RING  
9. 198-5018 [2] BEARING  
10. 154-7892 [1] RING  
11. 6V-8754 [4] RING-RETAINING  
12. 095-1575 [1] SEAL-O-RING  
13. 095-1689 [1] SEAL-O-RING  
14. 5F-3999 [1] SEAL-O-RING  
15. 171-9342 [1] PLUG  
16. 198-5022 [2] PLUG  
17. 095-1582 [3] SEAL-O-RING  
18. 154-7860 [2] PIN  
19. 198-5023 [1] SHAFT  
20. 198-5024 [1] PLATE  
21. 154-1523 [1] BLOCK  
22. 154-1525 [1] PLATE  
23. 154-1526 [1] BALL  
24. 198-5028 [1] PLATE  
25. 154-1528 [2] WASHER (19.8X31.8X2-MM THK)  
26. 154-1529 [1] SPRING  
27. 154-1537 [1] SEAL  
28. 154-7849 [1] RING  
29. 194-0755 [1] BEARING  
30. 154-7851 [1] BEARING  
31. 194-0756 [3] ROLLER  
32. 322-9522 [1] KIT-PISTON (TRAVEL MOTOR)  
    (INCLUDES PISTON, SEAL & SHOE)
33. 154-7858 [2] PIVOT  
34. 198-5032 [2] PIN  
35. 198-5033 [1] SPRING  
36. 169-1188 [1] PLUG  
37. 198-5037 [2] PLUG  
38. 198-5038 [2] STOP  
39. 154-1533 [2] PLUG  
40. 154-1534 [2] VALVE  
41. 198-5039 [2] SPRING  
42. 154-1536 [2] SPRING  
43. 095-1590 [2] SEAL-O-RING  
44. 095-1580 [2] SEAL-O-RING  
45. 169-1186 [5] PLUG  
46. 154-1520 [3] PLUG  
47. 194-5431 [1] VALVE  
48. 154-7855 [1] STOP  
49. 154-7856 [1] RING  
50. 194-0758 [1] SPRING  
51. 198-5041 [1] BALL  
52. 3J-1907 [1] SEAL-O-RING  
53. 198-5043 [2] ORIFICE  
54. 198-5044 [1] ORIFICE  
55. 179-9758 [1] PLUG  
56. 154-7846 [2] PIN  
57. 8T-1158 M [6] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
58. 198-5006 [1] KIT-SPINDLE (TRAVEL MOTOR)  
    (INCLUDES SPINDLE & FLANGE)
59. 198-5010 [1] GEAR AS  
  7I-2317 [4] SPACER (28.5X47X1.6-MM THK)  
  171-9334 [2] SHAFT  
  171-9336 [4] BEARING  
  198-5012 [4] BEARING  
60. 198-5014 [1] KIT-GEAR (TRAVEL MOTOR)  
    (INCLUDES GEARS)
61. 198-5020 [1] KIT-SEAL (TRAVEL MOTOR)  
    (INCLUDES SEALS)
62. 198-5025 [1] KIT-PISTON (TRAVEL MOTOR)  
    (INCLUDES PISTON AS)
63. 198-5034 [1] FLANGE AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP32920082
 

191-3359: POWER TRAIN AR

191-3359 POWER TRAIN AR
PART OF 191-0368 COMMON AR
i01613189 SEBP3292
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  191-3860 Y [1] DRIVE GP-SWING  
  191-3861 Y [1] DRIVE GP-FINAL  
  163-9997 Y [2] SPROCKET GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32920083
 

163-9997: SPROCKET GP

163-9997 SPROCKET GP
PART OF 191-3359 POWER TRAIN AR
i01358500 SEBP3292
1639997 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 158-4795 [1] SPROCKET  
2. 085-9768 M [9] BOLT (M14X2X40-MM)  
3. 7X-0510 [9] WASHER-HARD (15.5X29X3-MM THK)  
  M   METRIC PART
 

#SEBP32920084
 

200-5432: COUNTERWEIGHT GP

200-5432 COUNTERWEIGHT GP
PART OF 208-2149 CHASSIS AR
i01614167 SEBP3292
2005432 COUNTERWEIGHT GP Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5224 [1] PLUG-SEAL  
2. 200-5444 [1] COUNTERWEIGHT AS  
3. 200-5529 [1] INSULATION  
4. 200-5530 [1] INSULATION  
5. 144-9397 [1] CAP  
6. 7X-2563 M [1] BOLT (M20X2.5X60-MM)  
8. 8T-4187 M [3] BOLT (M20X2.5X80-MM)  
9. 8T-5439 [4] WASHER-HARD (21.5X45X6-MM THK)  
10. 1R-7128 B [4] SHIM (1-MM THK)  
11. 7I-0676 B [4] SHIM (1.6-MM THK)  
12. 246-6765 [1] INSULATION  
13. 246-6766 [1] INSULATION  
14. 246-6767 [1] INSULATION  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP32920085
 

200-5433: COUNTERWEIGHT GP

200-5433 COUNTERWEIGHT GP -EXTRA
CANNOT BE USED WITH @@@@@200-5434@@@@@
AN ATTACHMENT
i01615428 SEBP3292
2005433 COUNTERWEIGHT GP Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-6197 [2] PLUG  
2. 191-0263 [1] COUNTERWEIGHT AS  
3. 201-7867 [1] PIPE-EXHAUST  
4. 5P-2230 [1] CLAMP-HOSE  
5. 8T-6381 M [2] BOLT (M20X2.5X120-MM)  
6. 8T-5439 [2] WASHER-HARD (21.5X45X6-MM THK)  
  M   METRIC PART
 

#SEBP32920086
 

191-0206: COVER GP-ACCESS

191-0206 COVER GP-ACCESS -RADIATOR, TOP
S/N DSA1-645
PART OF 200-5435 HOOD & GUARD GP
i01631440 SEBP3292
1910206 COVER GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] COVER  
2. 191-0223 [1] BRACKET  
3. 191-0224 [1] BRACKET AS  
4. 191-0225 [1] INSULATION  
5. 191-0258 [1] INSULATION  
6. 191-0349 [3] INSULATION  
7. 191-0325 [1] INSULATION  
8. 191-0326 [1] INSULATION  
9. 140-3201 [2] GROMMET  
10. 7X-7729 [3] WASHER (11X25X3-MM THK)  
11. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP32920087
 

191-0206: COVER GP-ACCESS

191-0206 COVER GP-ACCESS -RADIATOR, TOP
S/N DSA646-UP
PART OF 200-5435 HOOD & GUARD GP
i01986432 SEBP3292
1910206 COVER GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] COVER  
2. 191-0223 [1] BRACKET  
3. 191-0224 [1] BRACKET AS  
4. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
5. 235-0435 C [1] FOAM  
6. 191-0349 [3] INSULATION  
7. 191-0325 [1] INSULATION  
8. 235-0436 C [1] INSULATION  
9. 140-3201 [2] GROMMET  
10. 7X-7729 [3] WASHER (11X25X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP32920088
 

191-0208: COVER GP-ACCESS

191-0208 COVER GP-ACCESS -RADIATOR, SIDE
PART OF 200-5435 HOOD & GUARD GP
i01631449 SEBP3292
1910208 COVER GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-0239 [1] INSULATION  
2. Z [1] COVER AS  
3. 5P-5643 BD SEAL  
4. 5P-5672 BD SEAL  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  Z   NOT SERVICED SEPARATELY
 

#SEBP32920089
 

200-5434: COVER GP-COUNTERWEIGHT

200-5434 COVER GP-COUNTERWEIGHT
CANNOT BE USED WITH @@@@@200-5433@@@@@
AN ATTACHMENT
i01615425 SEBP3292
2005434 COVER GP-COUNTERWEIGHT Parts scheme
  For full view, you need register

Parts for your 305 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-0183 [1] COVER  
2. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Final Drive Oil - Change
305 CR Mini Hydraulic Excavator
Final Drive Oil Level - Check
305 CR Mini Hydraulic Excavator
Final Drive Sun Gear Removal
305 CR Mini Hydraulic Excavator
Final Drive Oil Sample - Obtain
305 CR Mini Hydraulic Excavator
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Final Drive
305 CR Mini Hydraulic Excavator Hydraulic System
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
305 Mini Hydraulic Excavator Machine Systems
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Caterpillar Parts SIS Catalog 305 :

WIRING GP-FRONT
209-8169 WIRING GP-FRONT
WIRING GP-CONSOLE
215-2865 WIRING GP-CONSOLE
WIRING GP-CONSOLE
215-2865 WIRING GP-CONSOLE
WIRING GP-CONSOLE
215-2865 WIRING GP-CONSOLE
WIRING GP-CONSOLE
215-2865 WIRING GP-CONSOLE
WIRING GP-CANOPY
222-2637 WIRING GP-CANOPY
WIRING GP-CAB
261-2490 WIRING GP-CAB
WIRING GP-CAB
219-9796 WIRING GP-CAB
DRIVE GP-TRAVEL MOTOR & FINAL
191-1384 DRIVE GP-TRAVEL MOTOR & FINAL
191-3359 POWER TRAIN AR
SPROCKET GP
163-9997 SPROCKET GP
COUNTERWEIGHT GP
200-5432 COUNTERWEIGHT GP
COUNTERWEIGHT GP
200-5433 COUNTERWEIGHT GP
COVER GP-ACCESS
191-0206 COVER GP-ACCESS
COVER GP-ACCESS
191-0206 COVER GP-ACCESS
COVER GP-ACCESS
191-0208 COVER GP-ACCESS

Truck sale:

 
$48,400 USD 
CATERPILLAR 305.5 2015
- TRACK EXCAVATORS
MUSTANG RENTAL SERVICES
 
$48,400 USD 
CATERPILLAR 305.5 2015
- TRACK EXCAVATORS
MUSTANG RENTAL SERVICES
CATERPILLAR 305.5 2015
$48,400 USD 
CATERPILLAR 305.5 2015
- TRACK EXCAVATORS
MUSTANG RENTAL SERVICES
2012 CAT 305.5
USD $51,700 
2012 CAT 305.5

CGT SPA
Roma, Italy
 
USD $53,000 
2012 CAT 305.5

PBE Group, Inc.
Pine Bush, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.