BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
BASIC ENGINE
CYLINDER BLOCK GP#SEBP32930020
200-2054: CYLINDER BLOCK AS
#SEBP32930021
200-2057: CYLINDER BLOCK AS
Parts for your 140H MOTOR GRADER:
CATERPILLAR SIS#SEBP32930022
204-3450: CYLINDER BLOCK AS
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 200-2054 Y | [1] | CYLINDER BLOCK AS | |
2. | 469-5314 | [6] | LINER-CYLINDER | |
3. | 437-1409 | [6] | SEAL-LINER | |
4. | 4F-5695 | [6] | PLUG-CUP | |
AVAILABLE REPLACEMENT PART(S): | ||||
168-7363 ABJ | SHIM-LINER (0.22-MM THK) | |||
168-7364 ABJ | SHIM-LINER (0.25-MM THK) | |||
168-7365 ABJ | SHIM-LINER (0.28-MM THK) | |||
168-7366 ABJ | SHIM-LINER (0.5-MM THK) | |||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
J | USED TO SET LINER PROTRUSION ON REBUILT MID-SUPPORT LINER ENGINE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930023
204-3451: CYLINDER BLOCK AS
Parts for your 140H MOTOR GRADER:
CATERPILLAR SIS#SEBP32930024
115-2982: CYLINDER BLOCK GP
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 204-3450 CY | [1] | CYLINDER BLOCK AS | |
2. | 7N-5683 | [6] | DOWEL | |
6. | 6V-3538 | [2] | DOWEL | |
7. | 1N-5999 | [2] | PLUG-O-RING | |
8. | 5P-7813 | [2] | SEAL-O-RING | |
9. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
10. | 6V-5048 | [1] | SEAL-O-RING | |
11. | 3B-0623 | [3] | PLUG-CUP | |
12. | 4G-4972 | [6] | SEAL-O-RING | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930025
180-6662: CYLINDER BLOCK GP
180-6662 CYLINDER BLOCK GP
S/N 3PD1-UP
PART OF 160-5101, 285-6403, 338-1674 ENGINE AR
S/N 3PD1-UP
PART OF 160-5101, 285-6403, 338-1674 ENGINE AR
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 204-3451 Y | [1] | CYLINDER BLOCK AS | |
2. | 7N-5683 | [4] | DOWEL | |
6. | 6V-3538 | [2] | DOWEL | |
7. | 1N-5999 | [2] | PLUG-O-RING | |
8. | 5P-7813 | [2] | SEAL-O-RING | |
9. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
10. | 6V-5048 | [1] | SEAL-O-RING | |
11. | 3B-0623 | [4] | PLUG-CUP | |
12. | 4G-4972 | [6] | SEAL-O-RING | |
13. | 8C-4403 | [2] | DOWEL | |
Y | SEPARATE ILLUSTRATION |
#SEBP32930026
179-9459: CYLINDER HEAD AS
179-9459 CYLINDER HEAD AS
S/N 3PD1-UP; APM1-UP
PART OF 179-9462 CYLINDER HEAD AS, 148-2149 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@179-9462@@@@@
S/N 3PD1-UP; APM1-UP
PART OF 179-9462 CYLINDER HEAD AS, 148-2149 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@179-9462@@@@@
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | Z | [1] | CYLINDER HEAD | |
2. | 3B-0623 | [8] | PLUG-CUP | |
3. | 179-9453 | [12] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | |
179-9455 AB | [12] | SEAT-VALVE (0.508-MM OS) | ||
4. | 138-2006 | [12] | INSERT-VALVE SEAT (INLET)(STANDARD) | |
144-2952 AB | [12] | INSERT-VALVE SEAT (0.508-MM OS) | ||
5. | 116-1102 | [6] | SLEEVE-INJECTOR | |
6. | 6V-7604 | [16] | PLUG-CUP | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
Z | NOT SERVICED SEPARATELY |
#SEBP32930027
179-9462: CYLINDER HEAD AS
179-9462 CYLINDER HEAD AS
S/N 3PD1-UP; APM1-UP
FIELD REPLACEMENT FOR @@@@@179-9459@@@@@
S/N 3PD1-UP; APM1-UP
FIELD REPLACEMENT FOR @@@@@179-9459@@@@@
Parts for your 140H MOTOR GRADER:
CATERPILLAR SIS#SEBP32930028
116-1085: CYLINDER HEAD GP
116-1085 CYLINDER HEAD GP
S/N 3PD1-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
S/N 3PD1-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
Parts for your 140H MOTOR GRADER:
CATERPILLAR SIS#SEBP32930029
148-2149: CYLINDER HEAD GP
148-2149 CYLINDER HEAD GP
S/N 3PD1-UP
PART OF 116-1085 CYLINDER HEAD GP, 20R-1457 KIT-ENGINE OVERHAUL
S/N 3PD1-UP
PART OF 116-1085 CYLINDER HEAD GP, 20R-1457 KIT-ENGINE OVERHAUL
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 179-9459 Y | [1] | CYLINDER HEAD AS | |
2. | 100-8150 | [24] | GUIDE-VALVE (STANDARD) | |
103-0734 AB | GUIDE-VALVE (0.127-MM OS) | |||
103-0735 AB | GUIDE-VALVE (0.508-MM OS) | |||
3. | 6I-1638 | [12] | BASE-INJECTOR POSITIONING | |
4. | 2A-4429 | [48] | LOCK-RETAINER | |
5. | 133-7029 | [12] | VALVE-EXHAUST | |
6. | 7E-9578 | [12] | VALVE-INLET | |
7. | 224-4441 | [24] | SPRING (VALVE)(INNER) | |
8. | 332-2152 | [24] | SPRING-VALVE (OUTER) | |
9. | 6I-2663 | [24] | ROTOCOIL AS | |
(EACH INCLUDES) | ||||
6I-2662 | [1] | SHIELD | ||
7C-8581 | [1] | ROTOCOIL AS | ||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
Y | SEPARATE ILLUSTRATION |
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Disassembly and Assembly