AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

265-3855 PLUG GP-CYLINDER BLOCK S/N 3PD12557-UP PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR 140H


BASIC ENGINE
CYLINDER BLOCK GP
BELT TIGHTENER GP
VALVE MECHANISM GP
CRANKSHAFT GP
MOUNTING GP-ENGINE
SUPPRESSION GP-SOUND
VALVE MECHANISM GP

MOTOR GRADER 140H MOTOR GRADER APM
 140H Motor Grader APM00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3293 140H APM   (2001)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
180-6662 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
138-2028 PLUG GP-CYLINDER BLOCK
265-3855 PLUG GP-CYLINDER BLOCK
PLUG GP-ENGINE
174-1760 PLUG GP-ENGINE
PLUG GP-ENGINE
174-1760 PLUG GP-ENGINE
 

#SEBP32930060
 

265-3855: PLUG GP-CYLINDER BLOCK

265-3855 PLUG GP-CYLINDER BLOCK
S/N 3PD12557-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
i02339540 SEBP3293
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-4182 N [1] PLUG (7/16-20-THD)  
  9S-8005 H [1] PLUG (3/4-16-THD)  
  9S-4191 J [1] PLUG (9/16-18-THD)  
  6V-6609 H [1] SEAL-O-RING  
  6V-5048 N [1] SEAL-O-RING  
  3J-1907 J [1] SEAL-O-RING  
  H   USE IN WATER MANIFOLD BLEED OPENING
  J   USE IN FUEL PRESSURE OPENING
  N   USE IN TIMING PROBE OPENING (CYL BLOCK - RIGHT SIDE)
 

#SEBP32930061
 

174-1760: PLUG GP-ENGINE

174-1760 PLUG GP-ENGINE
S/N 3PD1-3678
PART OF 160-5101 ENGINE AR
i01514837 SEBP3293
1741760 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [1] PLUG-CUP  
2. 8C-3446 [1] VALVE-SAMPLING  
3. 116-5435 [1] CONNECTOR  
4. 3J-1907 [2] SEAL-O-RING  
5. 3J-7354 [1] SEAL-O-RING  
6. 3K-0360 [1] SEAL-O-RING  
7. 5P-9617 [1] ADAPTER  
8. 6V-0852 [1] CAP-DUST (FUEL-SAMPLING VALVE)  
9. 6V-4589 [1] SEAL-O-RING  
10. 6V-5049 [3] SEAL-O-RING  
11. 6V-8397 [1] SEAL-O-RING  
13. 9S-4191 [3] PLUG (9/16-18-THD)  
14. 9S-8006 [1] PLUG (7/8-14-THD)  
15. 9X-6650 [1] CONNECTOR-O-RING  
 

#SEBP32930062
 

174-1760: PLUG GP-ENGINE

174-1760 PLUG GP-ENGINE
S/N 3PD3679-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
i01926808 SEBP3293
1741760 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [1] PLUG-CUP  
2. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
3. 116-5435 [1] CONNECTOR  
4. 3J-1907 [2] SEAL-O-RING  
6. 3K-0360 [1] SEAL-O-RING  
8. 6V-0852 [1] CAP-DUST (FUEL-SAMPLING VALVE)  
9. 201-4340 [1] PLUG AS  
  6V-4589 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
10. 6V-5049 [3] SEAL-O-RING  
11. 6V-8397 [1] SEAL-O-RING  
13. 9S-4191 [3] PLUG (9/16-18-THD)  
15. 9X-6650 [1] CONNECTOR-O-RING  
 

#SEBP32930063
 

142-2011: PULLEY GP-IDLER

142-2011 PULLEY GP-IDLER
S/N 3PD3936-4380
86.5MM DIAMETER
PART OF 167-0017 BELT TENSIONER GP
i01283043 SEBP3293
1422011 PULLEY GP-IDLER Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-7137 [1] SEAL-O-RING  
2. 144-5611 [1] PULLEY AS-IDLER  
3. 179-6851 [1] SPACER  
4. 179-6852 [1] COVER  
5. 179-6853 M [1] BOLT (M12X1.75X79-MM)  
  M   METRIC PART
 

#SEBP32930064
 

115-9397: ROCKER ARM GP

115-9397 ROCKER ARM GP
S/N 3PD1-UP
PART OF 117-2749 VALVE MECHANISM GP
i00474540 SEBP3293
1159397 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-9398 [2] ARM-VALVE ROCKER (EXHAUST)  
2. 115-9400 [2] ARM AS (UNIT INJECTION)  
    (EACH INCLUDES)
  2D-6642 [2] BALL  
  115-9402 [1] BEARING  
3. 115-9399 [2] ARM-VALVE ROCKER (INLET)  
4. 7C-1798 [2] SCREW-ARM ADJUSTMENT  
5. 245-6095 [2] NUT-HEX THIN (M12X1.5-THD)  
6. 258-8721 [2] BUTTON  
7. 8L-2777 [2] SEAL-O-RING  
8. 115-9403 [2] SHAFT AS  
    (EACH INCLUDES)
9. 3S-6605 [1] PLUG-CUP  
10. 096-0014 [1] PIN-SPRING  
11. 185-4461 [2] SUPPORT AS  
    (EACH INCLUDES)
12. 180-1538 [2] DOWEL  
13. 183-4365 M [4] SCREW-ADJUSTMENT (M10X1.5-THD)  
14. 2Y-5829 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32930065
 

116-1091: SEAL GP-CRANKSHAFT

116-1091 SEAL GP-CRANKSHAFT -SINGLE LIP
S/N 3PD1-UP
REAR
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
i00479020 SEBP3293
1161091 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-2323 [1] COVER  
2. 8T-0640 M [6] BOLT (M6X1X30-MM)  
3. 5P-0537 [13] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 294-6007 [7] BOLT-HEAD LOCKING (M6X1X18-MM)  
5. 7C-1583 [1] GASKET  
6. 226-4757 [1] SEAL GP-CRANKSHAFT  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32930066
 

174-1625: SUPPORT GP-ENGINE

174-1625 SUPPORT GP-ENGINE
S/N 3PD1-UP
PART OF 338-1676 ENGINE AR
i01872622 SEBP3293
1741625 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-1455 [1] SUPPORT  
2. 2M-0849 [8] WASHER-HARD (13.5X25.5X5-MM THK)  
3. 6V-5696 M [8] BOLT (M12X1.75X80-MM)  
  M   METRIC PART
 

#SEBP32930067
 

174-1627: SUPPORT GP-ENGINE

174-1627 SUPPORT GP-ENGINE
S/N 3PD1-UP
PART OF 160-5101, 285-6403, 338-1674 ENGINE AR
i01514846 SEBP3293
1741627 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-1628 [1] SUPPORT-FRONT  
2. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 6V-8336 M [8] BOLT (M12X1.75X70-MM)  
  M   METRIC PART
 

#SEBP32930068
 

178-9527: SUPPRESSION GP-SOUND

178-9527 SUPPRESSION GP-SOUND -ENGINE ENCLOSURE
S/N APM1-UP
AN ATTACHMENT
i01522756 SEBP3293
1789527 SUPPRESSION GP-SOUND Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-2302 [1] INSULATION  
2. 183-2303 [1] PANEL  
3. 183-2304 [1] PANEL  
4. 183-2306 [2] INSULATION  
 

#SEBP32930069
 

117-2749: VALVE MECHANISM GP

117-2749 VALVE MECHANISM GP -ENGINE
S/N 3PD1-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
i00997769 SEBP3293
1172749 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
2. 8T-0275 M [4] BOLT (M6X1X50-MM)  
3. 3E-4352 [8] WASHER-HARD (8.8X20.5X2.5-MM THK)  
4. 8T-0100 M [16] BOLT (M8X1.25X60-MM)  
5. 7C-8292 [8] ISOLATOR  
6. 9Y-7215 [8] SLEEVE-ISOLATOR  
7. 9Y-4357 [1] BREATHER AS (CRANKCASE)  
8. 9Y-1758 [1] GASKET (CRANKCASE BREATHER)  
9. 102-5842 [1] BASE-VALVE MECHANISM COVER  
10. 109-5309 [1] GASKET-VALVE COVER  
11. 115-9397 Y [3] ROCKER ARM GP  
12. 148-2063 CY [2] LIFTER GP-VALVE  
13. 104-3567 [12] PUSHROD-VALVE  
14. 104-3568 [6] PUSHROD  
15. 9M-1974 [9] WASHER-HARD (8.8X16X2-MM THK)  
16. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Main Bearings - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Block - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3176C and 3196 Engines For Caterpillar Built Machines
Cylinder Liner - Install
3176C and 3196 Engines For Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Main Bearings - Install
3176C and 3196 Engines For Caterpillar Built Machines
Cylinder Liner - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Camshaft Bearings - Install
3176C and 3196 Engines For Caterpillar Built Machines
Camshaft Bearings - Remove
3176C and 3196 Engines For Caterpillar Built Machines

Caterpillar Parts SIS Catalog 140H :

PLUG GP-CYLINDER BLOCK
138-2028 PLUG GP-CYLINDER BLOCK
PISTON & ROD GP
132-3203 PISTON & ROD GP
PANEL GP-SOUND SUPPRESSION
179-6588 PANEL GP-SOUND SUPPRESSION
PANEL GP-SOUND SUPPRESSION
179-6588 PANEL GP-SOUND SUPPRESSION
PAN GP-OIL
252-8692 PAN GP-OIL
PAN GP-OIL
174-1574 PAN GP-OIL
PAN GP-OIL
174-1574 PAN GP-OIL
MOUNTING GP-VALVE MECHANISM
116-5408 MOUNTING GP-VALVE MECHANISM
PLUG GP-ENGINE
174-1760 PLUG GP-ENGINE
PLUG GP-ENGINE
174-1760 PLUG GP-ENGINE
PULLEY GP-IDLER
142-2011 PULLEY GP-IDLER
ROCKER ARM GP
115-9397 ROCKER ARM GP
SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT
SUPPORT GP-ENGINE
174-1625 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
174-1627 SUPPORT GP-ENGINE
SUPPRESSION GP-SOUND
178-9527 SUPPRESSION GP-SOUND

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.