ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP32930370
247-6437: WIRING GP-CAB
247-6437 WIRING GP-CAB
S/N APM1-UP
PART OF 292-7974 DISPLAY AR-MONITOR, 250-1930 WIRING GP-MONITOR
AN ATTACHMENT
S/N APM1-UP
PART OF 292-7974 DISPLAY AR-MONITOR, 250-1930 WIRING GP-MONITOR
AN ATTACHMENT
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3S-2093 | [7] | STRAP-CABLE | |
2. | 251-7591 | [1] | WIRE AS | |
3. | 299-7694 | [1] | HARNESS AS-CAB | |
4. | 111-4627 M | [2] | SCREW-MACHINE (M6X1X30-MM) | |
5. | 130-5300 | [4] | CLIP | |
6. | 156-6175 | [2] | CLIP (LADDER) | |
7. | 225-3109 M | [6] | SCREW-TRUSS HEAD (M4X0.7X14-MM) | |
8. | 249-3731 | [1] | PLATE AS (LIGHT BAR, RH) | |
9. | 249-3733 | [1] | PLATE AS (LIGHT BAR, LH) | |
10. | 249-3736 | [1] | PLATE AS (LIGHT BAR) | |
11. | 4D-8123 | [1] | CLIP (LOOP) | |
12. | 4K-8864 | [1] | CLIP (LOOP) | |
13. | 4P-7581 | [1] | CLIP (LADDER) | |
14. | 5P-4115 | [9] | WASHER-HARD (7.2X19X2-MM THK) | |
15. | 5P-9297 | [3] | CLIP (LOOP) | |
16. | 5P-9299 | [3] | CLIP (LOOP) | |
17. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
18. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
19. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
20. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
21. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
22. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
M | METRIC PART |
#SEBP32930371
159-5839: WIRING GP-CONSOLE
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-0109 | [4] | PLUG (ROCKER SWITCH) | |
2. | 3E-6328 Y | [1] | ALARM GP (24-VOLT)(ACTION) | |
3. | 3S-2093 | [5] | STRAP-CABLE | |
4. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE) | |
5. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
6. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
8. | 167-7506 | [1] | HARNESS AS-OPERATOR CONTROLS | |
102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
(EACH INCLUDES PLUG AS,WEDGE, & INTERFACE SEAL) | ||||
9. | 167-7536 | [1] | HARNESS AS-CONSOLE | |
7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
10. | 169-5414 | [2] | CLIP | |
11. | 183-2151 | [1] | SWITCH AS-ROCKER (24-VOLT) | |
196-7268 | [1] | SWITCH AS (THROTTLE SPEED SET) | ||
3E-8825 | [2] | LAMP (24-VOLT) | ||
183-2136 | [1] | ACTUATOR | ||
12. | 185-2197 | [1] | SWITCH AS-ROCKER | |
190-0370 | [1] | SWITCH AS (THROTTLE SPEED SET) | ||
3E-8825 | [2] | LAMP (24-VOLT) | ||
187-9380 | [1] | ACTUATOR | ||
13. | 130-5300 | [2] | CLIP | |
14. | 2V-8259 | [2] | GROMMET | |
15. | 3H-2900 | [1] | GROMMET | |
16. | 4D-7794 | [1] | CLIP | |
17. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
18. | 4P-7581 | [1] | CLIP (LADDER) | |
19. | 5M-3062 | [3] | BOLT (3/8-16X0.75-IN) | |
20. | 5S-4246 | [4] | LOCKWASHER | |
21. | 6B-4540 | [4] | NUT (4-40-THD) | |
22. | 6V-2480 | [4] | SCREW (4-40X0.5-IN) | |
23. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
24. | 7C-4354 | [1] | CLIP | |
25. | 7G-7053 | [1] | GROMMET | |
26. | 8M-2770 | [1] | CLIP (LOOP) | |
27. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
28. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
29. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
30. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
31. | 9X-9634 | [1] | SWITCH AS-ROCKER | |
3E-9327 | [1] | SWITCH AS (CENTERSHIFT PIN) | ||
3E-8817 | [1] | ACTUATOR | ||
3E-8825 | [1] | LAMP (24-VOLT) | ||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930372
159-5839: WIRING GP-CONSOLE
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-0109 | [4] | PLUG (ROCKER SWITCH) | |
2. | 3E-6328 Y | [1] | ALARM GP (24-VOLT)(ACTION) | |
3. | 3S-2093 | [5] | STRAP-CABLE | |
4. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE) | |
5. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
6. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
8. | 167-7506 | [1] | HARNESS AS-OPERATOR CONTROLS | |
199-8382 | [1] | RECEPTACLE AS | ||
102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
(EACH INCLUDES PLUG AS & WEDGE) | ||||
9. | 169-5414 C | [3] | CLIP | |
10. | 183-2151 | [1] | SWITCH AS-ROCKER (24-VOLT) | |
196-7268 | [1] | SWITCH AS (THROTTLE HOLD MODE) | ||
3E-8825 | [2] | LAMP (24-VOLT) | ||
183-2136 | [1] | ACTUATOR | ||
11. | 185-2197 | [1] | SWITCH AS-ROCKER (THROTTLE LOCK SET, RESET) | |
12. | 254-9249 C | [1] | HARNESS AS-CONSOLE | |
7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
(EACH INCLUDES PLUG AS & WEDGE) | ||||
102-8805 | [2] | KIT-RECEPTACLE (6-PIN) | ||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
13. | 130-5300 C | [1] | CLIP | |
15. | 3H-2900 | [3] | GROMMET | |
16. | 4D-7794 | [1] | CLIP | |
17. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
18. | 4P-7581 | [1] | CLIP (LADDER) | |
19. | 5M-3062 | [3] | BOLT (3/8-16X0.75-IN) | |
20. | 5S-4246 | [4] | LOCKWASHER | |
21. | 6B-4540 | [4] | NUT (4-40-THD) | |
22. | 6V-2480 | [4] | SCREW (4-40X0.5-IN) | |
23. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
24. | 7C-4354 | [1] | CLIP | |
25. | 7G-7053 | [1] | GROMMET | |
26. | 8M-2770 | [1] | CLIP (LOOP) | |
27. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
28. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
29. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
30. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
31. | 9X-9634 | [1] | SWITCH AS-ROCKER | |
3E-9327 | [1] | SWITCH AS (CENTERSHIFT PIN) | ||
3E-8817 | [1] | ACTUATOR | ||
3E-8825 | [1] | LAMP (24-VOLT) | ||
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930373
171-1103: WIRING GP-ENGINE
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
2. | 8L-2786 | [2] | SEAL-O-RING | |
4. | 3S-2093 | [10] | STRAP-CABLE | |
5. | 4K-8864 | [2] | CLIP (LOOP) | |
6. | 6V-8214 M | [2] | BOLT (M6X1X20-MM) | |
7. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
8. | 8J-1256 | [1] | CLIP (LOOP) | |
9. | 4P-8134 | [3] | CLIP (LADDER) | |
10. | 164-9609 | [1] | ELBOW-PIPE | |
11. | 171-1108 | [1] | HARNESS AS-CONTROL (ENGINE ELECTRONIC) | |
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
102-8803 | [4] | KIT-RECEPTACLE (3-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
159-9322 | [1] | SEAL-O-RING | ||
12. | 194-6724 Y | [1] | SENSOR GP-PRESSURE (TURBO OUTLET) | |
13. | 8M-2770 | [1] | CLIP (LOOP) | |
14. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
14A. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
15. | 6V-5049 | [2] | SEAL-O-RING | |
16. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
16A. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (INLET MANIFOLD) | |
16B. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
17. | 3J-7354 | [3] | SEAL-O-RING | |
18. | 3E-7448 | [1] | CONNECTOR | |
19. | 6V-6609 | [1] | SEAL-O-RING | |
20. | 189-9801 | [1] | SENSOR GP-SPEED (CAMSHAFT) | |
21. | 4P-5918 | [1] | CLIP | |
22. | 6V-5048 | [2] | SEAL-O-RING | |
23. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
24. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
25. | 8T-0642 M | [1] | BOLT (M8X1.25X14-MM) | |
26. | 117-1385 | [2] | SEAL-O-RING | |
27. | 188-7511 | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
28. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
29. | 8M-2771 | [1] | CLIP | |
30. | 6V-8837 M | [1] | BOLT (M6X1X16-MM) | |
31. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
32. | 6V-7981 M | [1] | BOLT (M10X1.5X70-MM) | |
33. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
34. | 132-5789 | [1] | CLIP (LADDER) | |
35. | 2M-7077 | [1] | SPACER (0.406X0.62X0.37-IN THK) | |
36. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
37. | 9X-0262 | [1] | ADAPTER | |
38. | 8T-8737 | [2] | PLUG-SEAL | |
39. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
40. | 3E-4353 | [1] | WASHER-HARD (11X25X3-MM THK) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930374
171-1103: WIRING GP-ENGINE
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2M-7077 | [1] | SPACER (0.406X0.62X0.37-IN THK) | |
2. | 3E-7448 | [1] | CONNECTOR | |
3. | 3S-2093 C | [6] | STRAP-CABLE | |
4. | 9X-0262 | [1] | ADAPTER | |
5. | 161-1705 C | [1] | SENSOR AS-PRESSURE (ENGINE OIL) | |
6. | 222-4086 | [1] | HARNESS AS (ENGINE ELECTRONIC) | |
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
159-9322 | [1] | SEAL-O-RING | ||
3S-2093 | [2] | STRAP-CABLE | ||
7. | 197-8391 CY | [1] | SENSOR GP-TEMPERATURE (INLET MANIFOLD) | |
8. | 197-8392 CY | [1] | SENSOR GP-TEMPERATURE (WATER COOLANT) | |
9. | 197-8393 CY | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
10. | 197-8394 CY | [1] | SENSOR GP-PRESSURE (FUEL) | |
11. | 197-8395 CY | [1] | SENSOR GP-PRESSURE (INLET MANIFOLD) | |
12. | 197-8396 CY | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
13. | 197-8397 CY | [1] | SENSOR GP-SPEED (CAMSHAFT) | |
14. | 4P-5918 | [1] | CLIP | |
15. | 132-5789 | [1] | CLIP (LADDER) | |
16. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN)(AIR INLET HEATER) | |
17. | 3E-4353 C | [2] | WASHER-HARD (11X25X3-MM THK) | |
18. | 4K-8864 C | [3] | CLIP (LOOP) | |
19. | 4P-8134 | [3] | CLIP (LADDER) | |
20. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
21. | 6V-5048 C | [1] | SEAL-O-RING | |
22. | 6V-5049 C | [1] | SEAL-O-RING | |
23. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
24. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
25. | 6V-6317 CM | [2] | BOLT (M10X1.5X20-MM) | |
26. | 6V-7981 M | [1] | BOLT (M10X1.5X70-MM) | |
27. | 6V-8214 M | [2] | BOLT (M6X1X20-MM) | |
28. | 6V-8837 M | [1] | BOLT (M6X1X16-MM) | |
29. | 8J-1256 | [1] | CLIP (LOOP) | |
30. | 8M-2770 C | [4] | CLIP (LOOP) | |
31. | 8M-2771 | [1] | CLIP | |
32. | 8T-0642 M | [1] | BOLT (M8X1.25X14-MM) | |
33. | 8T-8737 | [2] | PLUG-SEAL | |
34. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
35. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
36. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
37. | 197-8391 CY | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930375
171-1103: WIRING GP-ENGINE
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2M-7077 | [1] | SPACER (0.406X0.62X0.37-IN THK) | |
2. | 3E-7448 | [1] | CONNECTOR | |
3. | 3S-2093 C | [5] | STRAP-CABLE | |
4. | 4P-5918 | [1] | CLIP | |
5. | 9X-0262 | [1] | ADAPTER | |
6. | 197-8391 CY | [1] | SENSOR GP-TEMPERATURE (INLET MANIFOLD) | |
7. | 197-8392 CY | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
8. | 197-8393 CY | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
9. | 197-8394 CY | [1] | SENSOR GP-PRESSURE (FUEL) | |
10. | 197-8395 CY | [1] | SENSOR GP-PRESSURE (INLET MANIFOLD) | |
11. | 197-8396 CY | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
12. | 197-8397 CY | [1] | SENSOR GP-SPEED (CAMSHAFT) | |
13. | 164-9609 | [1] | ELBOW-PIPE | |
14. | 222-4086 | [1] | HARNESS AS (ENGINE ELECTRONIC) | |
126-1774 | [1] | COVER-CONNECTOR (MODULE CONNECTOR) | ||
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN)(ENGINE ELECTRONIC HARNESS) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN)(ENGINE ELECTRONIC HARNESS) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN)(ENGINE ELECTRONIC HARNESS) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN)(ENGINE ELECTRONIC HARNESS) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
102-8803 | [1] | KIT-RECEPTACLE (3-PIN)(ENGINE ELECTRONIC HARNESS) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
159-9322 | [1] | SEAL-O-RING | ||
3S-2093 | [2] | STRAP-CABLE (MODULE CONNECTOR) | ||
15. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN)(AIR INLET HEATER) | |
16. | 3E-4353 C | [1] | WASHER-HARD (11X25X3-MM THK) | |
17. | 4D-7794 | [1] | CLIP | |
18. | 4K-8864 C | [2] | CLIP (LOOP) | |
19. | 4P-8134 | [3] | CLIP (LADDER) | |
20. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
21. | 6V-5048 C | [2] | SEAL-O-RING | |
22. | 6V-5049 C | [1] | SEAL-O-RING | |
23. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
24. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
25. | 6V-6317 CM | [1] | BOLT (M10X1.5X20-MM) | |
26. | 6V-7981 M | [1] | BOLT (M10X1.5X70-MM) | |
27. | 6V-8214 M | [2] | BOLT (M6X1X20-MM) | |
28. | 6V-8837 M | [1] | BOLT (M6X1X16-MM) | |
29. | 8J-1256 | [1] | CLIP (LOOP) | |
30. | 8M-2770 C | [4] | CLIP (LOOP) | |
31. | 8M-2771 | [1] | CLIP | |
32. | 8T-0642 M | [1] | BOLT (M8X1.25X14-MM) | |
33. | 8T-8737 | [2] | PLUG-SEAL | |
34. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
35. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
36. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
37. | 197-8391 CY | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
38. | 197-8394 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930376
171-1103: WIRING GP-ENGINE
171-1103 WIRING GP-ENGINE
S/N 3PD1991-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
S/N 3PD1991-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5G-4313 | [1] | SPACER (10.34X15.88X12-MM THK) | |
2. | 3E-7448 | [1] | CONNECTOR | |
3. | 3S-2093 | [4] | STRAP-CABLE | |
4. | 4P-5918 | [1] | CLIP | |
5. | 9X-0262 | [1] | ADAPTER | |
6. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD) | |
6A. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
7. | 197-8392 Y | [1] | SENSOR GP-TEMPERATURE (WATER, COOLANT) | |
8. | 197-8393 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
9. | 197-8394 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
9A. | 197-8394 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
10. | 197-8395 Y | [1] | SENSOR GP-PRESSURE (AIR INLET MANIFOLD) | |
11. | 197-8396 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT TIMING) | |
12. | 197-8397 Y | [1] | SENSOR GP-SPEED (CAMSHAFT TIMING) | |
13. | 164-9609 | [1] | ELBOW-PIPE | |
14. | 183-4403 | [1] | CLIP (LOOP) | |
15. | 222-4086 | [1] | HARNESS AS (ENGINE ELECTRONIC) | |
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
159-9322 | [1] | SEAL-O-RING | ||
3S-2093 | [2] | STRAP-CABLE | ||
8T-8737 | [44] | PLUG-SEAL | ||
9X-1386 E | SLEEVE (25-CM) | |||
119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
126-1774 | [1] | COVER-CONNECTOR | ||
9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
180-9340 | [61] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
16. | 2V-3216 | [1] | CLIP (LOOP) | |
17. | 3E-4353 | [1] | WASHER-HARD (11X25X3-MM THK) | |
18. | 4D-7794 | [1] | CLIP | |
19. | 132-5789 | [1] | CLIP (LADDER) | |
20. | 4P-8134 | [2] | CLIP (LADDER) | |
21. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
22. | 6V-4369 | [1] | CLIP | |
23. | 6V-5048 | [2] | SEAL-O-RING | |
24. | 6V-5049 | [1] | SEAL-O-RING | |
25. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
26. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
27. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
28. | 6V-7981 M | [1] | BOLT (M10X1.5X70-MM) | |
29. | 6V-8214 M | [2] | BOLT (M6X1X20-MM) | |
30. | 6V-8837 M | [1] | BOLT (M6X1X16-MM) | |
31. | 7K-1181 | [1] | STRAP-CABLE | |
32. | 8J-1256 | [2] | CLIP (LOOP) | |
33. | 8M-2771 | [1] | CLIP | |
34. | 8M-2773 | [1] | CLIP (LOOP) | |
35. | 8T-0642 M | [1] | BOLT (M8X1.25X14-MM) | |
36. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
37. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
38. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930377
159-5856: WIRING GP-FRONT
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1S-2342 | [1] | STRAP AS-GROUND | |
2. | 3E-2026 | [1] | SWITCH AS-PRESSURE (STOP LIGHT) | |
186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
3. | 3E-3636 | [1] | SWITCH AS-BALL (CENTERSHIFT INDICATOR) | |
186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
4. | 3S-2093 | [15] | STRAP-CABLE | |
5. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
6. | 7K-1181 | [5] | STRAP-CABLE | |
7. | 8T-9655 | [8] | MOUNT-ISOLATION | |
8. | 9L-1566 | [3] | SUPPORT | |
9. | 9L-6331 | [1] | BRACKET | |
10. | 114-9281 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
(EACH INCLUDES) | ||||
186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
11. | 131-4135 | [1] | SWITCH AS-TEMPERATURE (HYDRAULIC OIL) | |
186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
12. | 169-5414 | [5] | CLIP | |
13. | 171-5941 Y | [1] | ELECTRONICS GP-POWER TRAIN | |
14. | 172-9389 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
15. | 185-4076 | [1] | HARNESS AS-PLATFORM | |
9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
127-5484 | [3] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
102-8805 | [4] | KIT-RECEPTACLE (6-PIN) | ||
102-8801 | [8] | KIT-RECEPTACLE (12-PIN) | ||
(EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
127-5483 | [3] | PLUG AS-CONNECTOR (1-PIN) | ||
127-5485 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
155-2255 | [6] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
155-2270 | [11] | KIT-CONNECTING PLUG (2-PIN) | ||
155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
(EACH INCLUDES PLUG AS,WEDGE & INTERFACE SEAL) ) | ||||
16. | 201-5244 | [1] | PLATE AS | |
17. | 6V-1889 | [1] | CLIP (LOOP) | |
18. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
19. | 130-5300 | [8] | CLIP | |
20. | 3J-1907 | [1] | SEAL-O-RING | |
21. | 3K-0360 | [1] | SEAL-O-RING | |
22. | 4D-7388 | [2] | CLIP (LOOP) | |
23. | 4D-7794 | [10] | CLIP | |
24. | 4K-8864 | [1] | CLIP (LOOP) | |
25. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
26. | 4P-8134 | [2] | CLIP (LADDER) | |
27. | 4S-4455 | [1] | CLIP | |
28. | 5M-3062 | [31] | BOLT (3/8-16X0.75-IN) | |
29. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
30. | 6D-4246 | [1] | CLIP (LOOP) | |
31. | 6V-3265 | [5] | CLIP | |
32. | 6V-3964 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
33. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
34. | 7C-4354 | [1] | CLIP | |
35. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
36. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
37. | 8M-2770 | [1] | CLIP (LOOP) | |
38. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
39. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
40. | 8T-4647 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
41. | 8T-4896 | [40] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
42. | 174-5907 | [2] | CLIP (LOOP) | |
43. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
44. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
45. | 7D-7233 | [2] | CLIP (LOOP) | |
46. | 8M-2773 | [1] | CLIP (LOOP) | |
47. | 114-9281 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
198-7332 FY | [1] | ELECTRONICS GP-MONITOR (CATERPILLAR MONITORING SYSTEM) | ||
B | USE AS REQUIRED | |||
F | NOT SHOWN | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930378
247-6433: WIRING GP-FRONT
247-6433 WIRING GP-FRONT
S/N APM1-2222
PART OF 247-6453 GRADE CONTROL AR
AN ATTACHMENT
S/N APM1-2222
PART OF 247-6453 GRADE CONTROL AR
AN ATTACHMENT
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(IMPLEMENT ELECTRONIC CONTROL) | |
1A. | 3E-5239 | [1] | RELAY AS (24-VOLT)(POWER MODE) | |
2. | 3S-2093 | [15] | STRAP-CABLE | |
3. | 8T-9655 | [8] | MOUNT-ISOLATION | |
4. | 233-4626 | [1] | BRACKET AS | |
5. | 244-5880 | [1] | BRACKET | |
6. | 244-5889 | [1] | BRACKET AS | |
7. | 245-7403 | [1] | BRACKET AS | |
8. | 033-8248 | [3] | CLIP (LOOP) | |
9. | 130-5300 | [6] | CLIP | |
10. | 149-7738 | [1] | CLIP (LOOP) | |
11. | 150-6256 M | [16] | BOLT-SOCKET HEAD (M3X0.5X12-MM) | |
12. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
13. | 1S-0994 | [1] | CLIP (LOOP) | |
14. | 230-7490 Y | [1] | CONTROL GP-UNPROGRAMMED (IMPLEMENT) | |
15. | 236-2354 | [1] | HARNESS AS-PLATFORM | |
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
3R-9965 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
6D-5257 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
3S-2093 | [3] | STRAP-CABLE | ||
7K-1181 | [4] | STRAP-CABLE | ||
126-1774 | [2] | COVER-CONNECTOR | ||
16. | 243-3248 | [1] | HARNESS AS-FRONT (BLADE) | |
102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
3S-2093 | [1] | STRAP-CABLE | ||
17. | 244-1899 | [1] | HARNESS AS-FRONT (CIRCLE) | |
102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
(EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
3S-2093 | [1] | STRAP-CABLE | ||
18. | 2T-3019 | [1] | CLIP (LOOP) | |
19. | 4D-9517 | [1] | CLIP (SLOT) | |
20. | 4P-7581 | [1] | CLIP (LADDER) | |
21. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
22. | 5C-7261 M | [5] | NUT (M8X1.25-THD) | |
23. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
24. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
25. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
26. | 5P-8167 | [2] | BOLT (3/8-16X0.625-IN) | |
27. | 5P-9297 | [2] | CLIP (LOOP) | |
28. | 5P-9299 | [1] | CLIP (LOOP) | |
29. | 6V-3265 | [5] | CLIP | |
30. | 7C-4354 | [17] | CLIP | |
31. | 7X-0619 | [4] | WASHER-HARD (20X30X2.5-MM THK) | |
32. | 8M-2773 | [2] | CLIP (LOOP) | |
33. | 8T-0100 M | [4] | BOLT (M8X1.25X60-MM) | |
34. | 8T-4121 | [22] | WASHER-HARD (11X21X2.5-MM THK) | |
35. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
36. | 8T-4191 M | [19] | BOLT (M10X1.5X16-MM) | |
37. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
38. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
39. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
40. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
41. | 8T-9658 | [4] | SPACER (8.2X12.7X25.4-MM THK) | |
42. | 9M-4972 | [1] | CLIP (LOOP) | |
43. | 9M-8406 | [1] | CLIP (LOOP) | |
44. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
45. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
46. | 9X-8873 | [4] | BOLT (1/2-13X2.25-IN) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930379
247-6433: WIRING GP-FRONT
247-6433 WIRING GP-FRONT
S/N APM2223-UP
PART OF 247-6453 GRADE CONTROL AR
AN ATTACHMENT
S/N APM2223-UP
PART OF 247-6453 GRADE CONTROL AR
AN ATTACHMENT
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
2. | 9L-1566 | [1] | SUPPORT | |
3. | 132-8487 C | [4] | NUT-RING | |
4. | 151-6187 | [16] | SCREW-MACHINE (4-40X0.875-IN) | |
5. | 169-5414 C | [1] | CLIP | |
6. | 233-4626 | [1] | BRACKET AS | |
7. | 244-5873 C | [1] | WIRE AS | |
8. | 244-5880 | [1] | BRACKET | |
9. | 244-5889 | [1] | BRACKET AS | |
10. | 245-7403 | [1] | BRACKET AS | |
11. | 258-0696 C | [1] | HARNESS AS-REAR LIGHTING | |
12. | 259-2977 C | [1] | HARNESS AS-PLATFORM | |
13. | 260-7647 CY | [1] | APPLICATION GP-POWER TRAIN | |
14. | 290-4752 | [1] | PLUG AS-CONNECTOR | |
8T-8737 | [40] | PLUG-SEAL | ||
9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
15. | 033-8248 C | [1] | CLIP (LOOP) | |
16. | 111-4871 C | [1] | RELAY (24-VOLT)(IMPLEMENT) | |
16A. | 111-4871 C | [1] | RELAY (24-VOLT)(GRADE CONTROL) | |
17. | 130-5300 C | [3] | CLIP | |
18. | 132-5789 C | [4] | CLIP (LADDER) | |
19. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
20. | 1S-0994 | [1] | CLIP (LOOP) | |
21. | 225-3109 M | [4] | SCREW-TRUSS HEAD (M4X0.7X14-MM) | |
22. | 244-1899 | [1] | HARNESS AS-FRONT (CIRCLE) | |
23. | 2Y-1834 | [2] | CLIP | |
24. | 4D-7794 | [5] | CLIP | |
25. | 4D-9517 | [1] | CLIP (SLOT) | |
26. | 4P-7581 C | [2] | CLIP (LADDER) | |
27. | 5C-7261 CM | [2] | NUT (M8X1.25-THD) | |
28. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
29. | 5M-3062 C | [17] | BOLT (3/8-16X0.75-IN) | |
30. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
31. | 5P-9297 C | [3] | CLIP (LOOP) | |
32. | 5P-9299 | [1] | CLIP (LOOP) | |
33. | 5S-7379 C | [1] | BOLT (3/8-16X0.875-IN) | |
34. | 6V-1889 C | [13] | CLIP (LOOP) | |
35. | 6V-8801 C | [1] | NUT (3/8-16-THD) | |
36. | 7C-4354 C | [1] | CLIP | |
37. | 7K-1181 | [26] | STRAP-CABLE | |
38. | 7X-0325 | [1] | BOLT (1/2-13X2.5-IN) | |
39. | 7X-0550 C | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
40. | 7X-0579 C | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
41. | 7X-0619 | [4] | WASHER-HARD (20X30X2.5-MM THK) | |
42. | 8T-4121 C | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
43. | 8T-4191 CM | [4] | BOLT (M10X1.5X16-MM) | |
44. | 8T-4224 C | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
45. | 8T-4835 | [4] | BOLT (1/2-13X2-IN) | |
46. | 8T-4896 C | [19] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
47. | 8T-6869 CM | [4] | BOLT (M8X1.25X60-MM) | |
48. | 8T-7971 | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | |
49. | 8T-9658 | [4] | SPACER (8.2X12.7X25.4-MM THK) | |
50. | 9M-8406 | [1] | CLIP (LOOP) | |
51. | 9X-8256 C | [2] | WASHER (6.6X12X2-MM THK) | |
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Service Magazine