ELECTRICAL AND STARTING SYSTEM
SENSOR GPWIRING GP
POWER TRAIN
AUTOSHIFT ARAXLE GP
FILTER GP
TRANSMISSION GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP#SEBP32930400
250-1932: WIRING GP-SENSOR
250-1932 WIRING GP-SENSOR -ACCUGRADE-CROSS SLOPE
S/N APM1-UP
PART OF 249-7788 SENSOR AR-GRADE
FOR USE WITH 12H, 135H
AN ATTACHMENT
S/N APM1-UP
PART OF 249-7788 SENSOR AR-GRADE
FOR USE WITH 12H, 135H
AN ATTACHMENT
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
247-6438 Y | [1] | WIRING GP-SENSOR | ||
Y | SEPARATE ILLUSTRATION |
#SEBP32930401
159-5845: WIRING GP-STEERING CONSOLE
159-5845 WIRING GP-STEERING CONSOLE
S/N APM1-UP
PART OF 159-4615 GENERAL AR
S/N APM1-UP
PART OF 159-4615 GENERAL AR
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-0109 | [3] | PLUG (ROCKER SWITCH) | |
2. | 3E-6477 | [1] | RELAY AS (24-VOLT)(TAIL, PANEL LAMPS) | |
3. | 3S-2093 | [8] | STRAP-CABLE | |
4. | 9W-1441 | [1] | FUSE (15-AMPERE)(TRANSMISSION) | |
5. | 9W-1442 | [11] | FUSE (10-AMPERE)(INSTRUMENT PANEL) | |
6. | 102-9383 | [1] | PLATE | |
7. | 112-6175 | [2] | SWITCH AS-LIMIT (BRAKE PEDAL) | |
(EACH INCLUDES) | ||||
6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
9B-7233 | [3] | LOCKWASHER | ||
8. | 239-8335 | [1] | HARNESS AS-CONSOLE (STEERING) | |
127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
(EACH INCLUDES PLUG AS & WEDGE) | ||||
127-5484 | [2] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
(EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
9. | 180-4028 | [2] | BRACKET | |
10. | 180-7033 | [1] | COVER | |
11. | 186-1714 | [1] | FILM-FUSE (LH) | |
12. | 186-1715 | [1] | FILM-FUSE (RH) | |
13. | 194-4181 | [1] | RESISTOR AS | |
8C-3334 | [1] | RIVET-TUBULAR | ||
186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
1S-9593 | [1] | STRAP-CABLE | ||
5P-6008 BE | TUBE-HEAT SHRINK (6.35-MM DIA)(100-CM) | |||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
14. | 130-5300 | [2] | CLIP | |
15. | 139-2120 | [1] | SWITCH AS (DIFFERENTIAL LOCK CONTROL) | |
3E-8825 | [2] | LAMP (24-VOLT)(DIFFERENTIAL LOCK) | ||
123-5861 | [1] | ACTUATOR | ||
16. | 151-4957 M | [4] | BOLT-SOCKET HEAD (M3X0.5X25-MM) | |
17. | 174-8131 M | [1] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
18. | 228-5009 | [4] | CLIP | |
19. | 3C-6969 M | [4] | NUT (M3X0.5-THD) | |
20. | 3E-9324 | [1] | SWITCH AS (PANEL LIGHTS) | |
3E-8783 | [1] | ACTUATOR | ||
3E-8825 | [1] | LAMP (24-VOLT)(PANEL LIGHTS) | ||
21. | 3E-8763 | [1] | SWITCH AS (24-VOLT)(TAIL LIGHTS) | |
3E-8825 | [1] | LAMP (24-VOLT)(TAIL LIGHTS) | ||
3E-9323 | [1] | ACTUATOR | ||
22. | 3L-8187 | [4] | LOCKWASHER | |
23. | 4B-1281 | [4] | SCREW-MACHINE (1/4-20X0.625-IN) | |
24. | 4B-4274 | [16] | WASHER (5.5X13X1.2-MM THK) | |
25. | 4D-1212 | [1] | GROMMET | |
26. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
27. | 5C-8312 M | [1] | NUT (M4X0.7-THD) | |
28. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
29. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
30. | 6D-4244 | [2] | CLIP (LOOP) | |
31. | 6J-0488 | [1] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
32. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
33. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
34. | 8C-7508 | [2] | LOCKWASHER | |
36. | 8L-6521 | [8] | BOLT (10-32X0.5-IN) | |
37. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
38. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
39. | 8T-4971 M | [1] | BOLT (M6X1X30-MM) | |
40. | 9P-2553 | [1] | SPACER (6.83X10.28X11-MM THK) | |
41. | 9X-1046 M | [6] | SCREW (M4X0.7X18-MM) | |
42. | 9X-2042 M | [1] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
43. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
44. | 3E-0109 | [1] | PLUG (ROCKER SWITCH)(ETHER STARTING AID) | |
45. | 3E-0109 | [1] | PLUG (ROCKER SWITCH)(FRONT FLOODLIGHT) | |
B | USE AS REQUIRED | |||
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART |
#SEBP32930402
180-9324: WIRING GP-TRANSMISSION
180-9324 WIRING GP-TRANSMISSION
S/N EDB1-4458; BJN1-99999
PART OF 179-6064 CONTROL GP-TRANSMISSION HYD
S/N EDB1-4458; BJN1-99999
PART OF 179-6064 CONTROL GP-TRANSMISSION HYD
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 213-9842 | [1] | HARNESS AS-TRANSMISSION | |
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
8T-8737 | [2] | PLUG-SEAL | ||
8T-8729 | [10] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
2. | 207-6034 | [1] | PLATE AS | |
3. | 205-8847 | [1] | PLATE AS | |
4. | 3S-2093 | [7] | STRAP-CABLE | |
5. | 205-8839 | [1] | CLIP AS | |
6. | 8T-0639 M | [1] | BOLT (M6X1X12-MM) | |
M | METRIC PART |
#SEBP32930403
117-2760: WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
S/N 3PD1-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
S/N 3PD1-UP
PART OF 160-5101, 285-6403, 338-1674, 338-1676 ENGINE AR
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4P-9537 | [1] | HARNESS AS-WIRING (UNIT INJECTOR) | |
103-8133 | KIT-RECEPTACLE (12-PIN) | |||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
2. | 2V-3216 | [4] | CLIP (LOOP) | |
3. | 7X-2468 | [3] | CLIP | |
4. | 7E-6508 | [6] | CAP AS | |
5. | 6V-8214 M | [9] | BOLT (M6X1X20-MM) | |
6. | 5P-0537 | [9] | WASHER-HARD (7.2X14.5X2-MM THK) | |
M | METRIC PART |
#SEBP32930404
161-0764: AUTOSHIFT AR
161-0764 AUTOSHIFT AR -TRANSMISSION
S/N APM1-UP
PART OF 197-5955 SNOW AR-MOTOR GRADER
AN ATTACHMENT
S/N APM1-UP
PART OF 197-5955 SNOW AR-MOTOR GRADER
AN ATTACHMENT
Parts for your 140H MOTOR GRADER:
CATERPILLAR SIS#SEBP32930405
134-1080: AXLE GP-FRONT
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5K-5288 | [2] | SEAL GP-DUO-CONE | |
(EACH INCLUDES) | ||||
5K-5129 | [2] | RING-SEALING | ||
2. | 2G-8626 | [2] | WASHER-THRUST (2.02X3.63X0.16-IN THK) | |
3. | 3B-8489 | [12] | FITTING-GREASE (1/8-27 PTF) | |
4. | 4D-3704 | [2] | WASHER-HARD (17X30X5-MM THK) | |
5. | 2G-8615 | [4] | WASHER-THRUST (2.015X3.625X0.11-IN THK) | |
6. | 2G-8742 | [2] | WASHER-HARD (20X65X5-MM THK) | |
7. | 2H-3740 | [4] | BOLT (3/4-16X1.25-IN) | |
8. | 2G-8741 | [4] | RING-METAL SEAL | |
9. | 2G-8777 | [4] | SEAL | |
10. | 9M-2092 | [4] | SEAL-O-RING | |
11. | 8W-5293 | [4] | PIN | |
12. | 8W-4652 | [1] | HOUSING-SPINDLE | |
13. | 8W-4653 | [1] | HOUSING-SPINDLE | |
14. | 8D-2811 | [2] | WASHER (1.25X1.94X0.032-IN THK) | |
15. | 2G-8633 | [2] | PIN | |
16. | 6C-3210 | [2] | BOLT (7/8-9X3-IN) | |
17. | 2J-3505 | [2] | NUT-FULL (7/8-9-THD) | |
18. | 7X-7731 | [2] | PLUG-PIPE (3/4-14-THD) | |
19. | 433-7105 | [8] | SEAL-PIN | |
20. | 9D-3523 | [1] | WASHER (2.062X4X0.188-IN) | |
21. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
22. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
23. | 2G-8768 | [4] | WASHER (10.5X53.8X3-MM THK) | |
24. | 103-9125 | [1] | BAR AS | |
24A. | 2G-8624 | [2] | BUSHING | |
25. | 5P-8890 | [2] | SEAL-LIP TYPE | |
26. | 030-0060 | [2] | CUP-BEARING | |
27. | 030-0061 | [2] | CONE-BEARING | |
28. | 7D-8637 | [2] | CUP-BEARING | |
29. | 7D-8636 | [2] | CONE-BEARING | |
30. | 3B-4618 | [2] | PIN-COTTER | |
31. | 7D-8643 | [2] | RETAINER | |
32. | 2G-3865 B | [6] | SHIM (0.127-MM THK) | |
33. | 0V-0375 | [6] | BOLT (1/2-13X3.25-IN) | |
34. | 9D-9797 | [2] | LOCK | |
35. | 5T-0906 | [2] | COVER | |
36. | 2J-8163 | [2] | SEAL-O-RING | |
37. | 5D-0353 | [4] | BOLT-LOCKING (3/8-16X1-IN) | |
38. | 8T-4956 M | [1] | BOLT (M12X1.75X35-MM) | |
39. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
40. | 5P-8843 | [2] | SEAL-LIP TYPE | |
41. | 2G-5673 B | [2] | WASHER (2.031X4X0.06-IN THK) | |
42. | 9G-5211 | [1] | SPACER (12.95X19.05X9-MM THK) | |
43. | 130-3595 | [1] | PIN AS | |
44. | 147-3400 | [2] | SPINDLE | |
45. | 0S-1592 | [2] | BOLT (5/8-11X1.25-IN) | |
46. | 2G-5667 | [2] | RETAINER | |
47. | 131-3740 Y | [1] | LINK GP-STEERING | |
48. | 134-1081 | [1] | AXLE AS-FRONT | |
49. | 2G-8631 | [4] | BUSHING | |
50. | 131-4428 | [2] | BUSHING | |
51. | 8X-3434 | [1] | ARM AS-LEANING (LH) | |
52. | 146-1842 | [1] | BUSHING | |
53. | 146-1843 | [1] | BUSHING | |
54. | 8W-6476 | [1] | PIN | |
56. | 8X-3435 | [1] | ARM AS-LEANING (RH) | |
57. | 146-1842 | [1] | BUSHING | |
58. | 146-1843 | [1] | BUSHING | |
59. | 8W-6497 | [1] | PIN | |
B | USE AS REQUIRED | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930406
333-9308: BASE GP-OIL FILTER
333-9308 BASE GP-OIL FILTER -POWER TRAIN
S/N APM2575-UP
PART OF 333-6437 FILTER GP-OIL
S/N APM2575-UP
PART OF 333-6437 FILTER GP-OIL
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3T-9549 | [1] | ADAPTER | |
2. | 7G-4998 | [1] | SPOOL-BYPASS | |
3. | 164-7577 Y | [1] | SWITCH GP-BYPASS (POWER TRAIN OIL FILTER) | |
4. | 334-2679 | [1] | SPRING | |
5. | 334-2680 | [1] | SPRING | |
6. | 5P-7815 | [1] | SEAL-O-RING | |
7. | 6V-5050 | [1] | SEAL-O-RING | |
8. | 9S-8008 | [1] | PLUG (1-1/16-12-THD) | |
PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
Y | SEPARATE ILLUSTRATION |
#SEBP32930407
180-9146: CASE & PARTS GP-TRANSMISSION
180-9146 CASE & PARTS GP-TRANSMISSION
S/N BJN1-857
PART OF 160-2196 TRANSMISSION AR
S/N BJN1-857
PART OF 160-2196 TRANSMISSION AR
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 178-9158 | [1] | CASE AS | |
7T-6496 | [7] | PLUG | ||
8M-6521 | [2] | DOWEL | ||
2. | 6Y-5728 | [1] | COVER AS-TRANSMISSION | |
7T-6496 | [1] | PLUG | ||
3. | 6V-1820 M | [35] | BOLT (M10X1.5X30-MM) | |
4. | 8T-5436 M | [2] | BOLT (M10X1.5X130-MM) | |
5. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
6. | 3K-0360 | [9] | SEAL-O-RING | |
7. | 2J-0157 | [1] | SEAL-O-RING | |
8. | 1U-8846 | SEALANT-GASKET (15ML) | ||
9. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
10. | 5M-6200 | [1] | SEAL-O-RING | |
11. | 8E-1133 | [1] | TUBE AS | |
12. | 6L-1650 | [1] | SEAL-O-RING | |
13. | 6V-5217 M | [13] | BOLT (M8X1.25X20-MM) | |
14. | 5P-3863 | [5] | SEAL-O-RING | |
15. | 9W-1454 | [5] | COVER | |
16. | 8S-9129 | [1] | FILTER-MAGNETIC (TRANSMISSION OIL) | |
17. | 8S-9130 | [1] | SCREEN-SUCTION (TRANSMISSION OIL) | |
18. | 4M-6108 | [2] | RACE-BEARING OUTER | |
19. | 148-1925 | [2] | VALVE-RELIEF | |
20. | 9X-4609 | [2] | SEAL-O-RING | |
21. | 9W-7038 | [1] | RING-SNAP | |
22. | 6V-3940 M | [4] | BOLT (M8X1.25X25-MM) | |
23. | 6Y-9763 | [1] | GEAR AS | |
4K-8603 | [1] | PLUG-CUP | ||
24. | 2S-3029 | [1] | BALL BEARING | |
25. | 9W-6465 | [1] | RETAINER-BEARING | |
26. | 9S-4190 | [5] | PLUG-O-RING (7/8-14-THD) | |
27. | 2M-9780 | [6] | SEAL-O-RING | |
28. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
29. | 3J-1907 | [2] | SEAL-O-RING | |
30. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
31. | 190-1684 | [1] | PLATE AS | |
32. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
33. | 5P-4483 | [1] | PLUG | |
34. | 7M-8485 | [4] | SEAL-O-RING | |
35. | 6V-7981 M | [5] | BOLT (M10X1.5X70-MM) | |
36. | 6V-4248 M | [8] | BOLT (M10X1.5X25-MM) | |
37. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
38. | 9S-8005 | [2] | PLUG (3/4-16-THD) | |
39. | 4M-6109 | [4] | RACE-ROLLER BEARING | |
40. | 5P-3924 | [2] | RACE-BEARING OUTER | |
41. | 9M-2042 | [1] | RACE-BEARING OUTER | |
42. | 191-3680 | [1] | COVER AS | |
4F-2609 | [2] | DOWEL | ||
43. | 2H-6489 | [1] | RACE-BEARING OUTER | |
44. | 198-6421 | [1] | HARNESS AS-TRANSMISSION | |
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
45. | 191-9256 | [2] | CLIP | |
46. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
48. | 183-8597 Y | [2] | SENSOR GP-SPEED (TMSN INTERMEDIATE SPEED) | |
48A. | 183-8597 Y | [1] | SENSOR GP-SPEED (TMSN INPUT SPEED) | |
48B. | 183-8597 Y | [2] | SENSOR GP-SPEED (TRANSMISSION OUTPUT) | |
49. | 201-0387 | [1] | CLIP AS | |
50. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
51. | 143-5373 | [1] | GUARD AS | |
52. | 5P-9299 | [3] | CLIP (LOOP) | |
53. | 3E-8700 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
54. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
55. | 9S-4181 | [3] | PLUG (1-5/16-12-THD) | |
56. | 1B-5174 | [1] | PLUG-PIPE | |
57. | 113-7745 | [1] | PLATE AS | |
8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
58. | 6D-3479 | [1] | CLIP (LOOP) | |
59. | 206-3713 | [1] | PLATE AS | |
60. | 145-8039 | [3] | LOCK | |
61. | 133-5631 | [1] | PLUG | |
62. | 5F-1678 | [1] | SEAL-O-RING | |
63. | 6V-5219 M | [4] | BOLT (M8X1.25X40-MM) | |
64. | 190-5212 | [1] | ROTOR | |
65. | 6V-8202 M | [4] | BOLT-SOCKET HEAD (M8X1.25X16-MM) | |
66. | 130-5300 | [3] | CLIP | |
67. | 206-3714 | [1] | PLATE | |
68. | 6V-2317 M | [2] | BOLT (M8X1.25X30-MM) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930408
180-9146: CASE & PARTS GP-TRANSMISSION
180-9146 CASE & PARTS GP-TRANSMISSION
S/N EDB621-3223; BJN858-99999
PART OF 160-2196 TRANSMISSION AR
S/N EDB621-3223; BJN858-99999
PART OF 160-2196 TRANSMISSION AR
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 178-9158 | [1] | CASE AS | |
7T-6496 | [7] | PLUG | ||
8M-6521 | [2] | DOWEL | ||
2. | 6Y-5728 | [1] | COVER AS-TRANSMISSION | |
7T-6496 | [1] | PLUG | ||
3. | 6V-1820 M | [37] | BOLT (M10X1.5X30-MM) | |
4. | 8T-5436 M | [2] | BOLT (M10X1.5X130-MM) | |
5. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
6. | 3K-0360 | [9] | SEAL-O-RING | |
7. | 2J-0157 | [1] | SEAL-O-RING | |
8. | 1U-8846 B | SEALANT-GASKET | ||
9. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
10. | 5M-6200 | [1] | SEAL-O-RING | |
11. | 8E-1133 | [1] | TUBE AS | |
12. | 6L-1650 | [1] | SEAL-O-RING | |
13. | 6V-5217 M | [13] | BOLT (M8X1.25X20-MM) | |
14. | 5P-3863 | [5] | SEAL-O-RING | |
15. | 9W-1454 | [5] | COVER | |
16. | 8S-9129 | [1] | FILTER-MAGNETIC (OIL PAN) | |
17. | 8S-9130 | [1] | SCREEN-SUCTION (TRANSMISSION) | |
18. | 4M-6108 | [2] | RACE-BEARING OUTER | |
19. | 148-1925 | [2] | VALVE-RELIEF | |
20. | 9X-4609 | [2] | SEAL-O-RING | |
21. | 9W-7038 | [1] | RING-SNAP | |
22. | 6V-3940 M | [4] | BOLT (M8X1.25X25-MM) | |
23. | 6Y-9763 | [1] | GEAR AS | |
4K-8603 | [1] | PLUG-CUP | ||
24. | 2S-3029 | [1] | BALL BEARING | |
25. | 9W-6465 | [1] | RETAINER-BEARING | |
26. | 9S-4190 | [5] | PLUG-O-RING (7/8-14-THD) | |
27. | 2M-9780 | [6] | SEAL-O-RING | |
28. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
29. | 3J-1907 | [2] | SEAL-O-RING | |
30. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
31. | 190-1684 | [1] | PLATE AS | |
32. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
33. | 5P-4483 | [1] | PLUG | |
34. | 7M-8485 | [4] | SEAL-O-RING | |
35. | 6V-7981 M | [5] | BOLT (M10X1.5X70-MM) | |
36. | 6V-4248 M | [8] | BOLT (M10X1.5X25-MM) | |
37. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
38. | 9S-8005 | [4] | PLUG (3/4-16-THD) | |
39. | 6I-8642 | [4] | RACE-BEARING OUTER | |
40. | 5P-3924 | [2] | RACE-BEARING OUTER | |
41. | 9M-2042 | [1] | RACE-BEARING OUTER | |
42. | 191-3680 | [1] | COVER AS | |
4F-2609 | [2] | DOWEL | ||
43. | 2H-6489 | [1] | RACE-BEARING OUTER | |
44. | 226-6621 | [1] | HARNESS AS-SENSOR (TRANSMISSION) | |
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
(EACH INCLUDES PLUG AS & WEDGE) | ||||
45. | 191-9256 | [2] | CLIP | |
46. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
48. | 183-8597 Y | [1] | SENSOR GP-SPEED (TRANSMISSION INPUT) | |
49. | 201-0387 | [1] | CLIP AS | |
50. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
51. | 143-5373 | [1] | GUARD AS | |
52. | 5P-9299 | [1] | CLIP (LOOP) | |
53. | 3E-8700 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
54. | 4P-7581 | [1] | CLIP (LADDER) | |
55. | 9S-4181 | [3] | PLUG (1-5/16-12-THD) | |
56. | 1B-5174 | [1] | PLUG-PIPE | |
57. | 113-7745 | [1] | PLATE AS | |
58. | 7K-1181 | [1] | STRAP-CABLE | |
59. | 206-3713 | [1] | PLATE AS | |
60. | 145-8039 | [3] | LOCK | |
61. | 133-5631 | [1] | PLUG | |
62. | 5F-1678 | [1] | SEAL-O-RING | |
63. | 6V-5219 M | [4] | BOLT (M8X1.25X40-MM) | |
64. | 190-5212 | [1] | ROTOR | |
65. | 6V-8202 M | [4] | BOLT-SOCKET HEAD (M8X1.25X16-MM) | |
66. | 130-5300 | [1] | CLIP | |
67. | 206-3714 | [1] | PLATE | |
68. | 6V-2317 M | [2] | BOLT (M8X1.25X30-MM) | |
69. | 183-8597 Y | [2] | SENSOR GP-SPEED (TRANSMISSION OUTPUT) | |
B | USE AS REQUIRED | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP32930409
180-9146: CASE & PARTS GP-TRANSMISSION
180-9146 CASE & PARTS GP-TRANSMISSION
S/N EDB3224-6444
PART OF 160-2196 TRANSMISSION AR
S/N EDB3224-6444
PART OF 160-2196 TRANSMISSION AR
Parts for your 140H MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 178-9158 | [1] | CASE AS | |
7T-6496 | [7] | PLUG | ||
8M-6521 | [2] | DOWEL | ||
2. | 6Y-5728 | [1] | COVER AS-TRANSMISSION | |
7T-6496 | [1] | PLUG | ||
3. | 6V-1820 M | [37] | BOLT (M10X1.5X30-MM) | |
4. | 8T-5436 M | [2] | BOLT (M10X1.5X130-MM) | |
5. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
6. | 3K-0360 C | [8] | SEAL-O-RING | |
7. | 2J-0157 | [1] | SEAL-O-RING | |
8. | 1U-8846 B | SEALANT-GASKET (15-ML) | ||
9. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
10. | 5M-6200 | [1] | SEAL-O-RING | |
11. | 8E-1133 | [1] | TUBE AS | |
12. | 6L-1650 | [1] | SEAL-O-RING | |
13. | 6V-5217 M | [13] | BOLT (M8X1.25X20-MM) | |
14. | 5P-3863 | [5] | SEAL-O-RING | |
15. | 9W-1454 | [5] | COVER | |
16. | 8S-9129 | [1] | FILTER-MAGNETIC (TRANSMISSION) | |
17. | 8S-9130 | [1] | SCREEN-SUCTION (TRANSMISSION CASE) | |
18. | 4M-6108 | [2] | RACE-BEARING OUTER | |
19. | 148-1925 | [2] | VALVE-RELIEF | |
20. | 9X-4609 | [2] | SEAL-O-RING | |
21. | 9W-7038 | [1] | RING-SNAP | |
22. | 6V-3940 M | [4] | BOLT (M8X1.25X25-MM) | |
23. | 6Y-9763 | [1] | GEAR AS | |
6Y-1007 | [1] | GEAR (38-TEETH) | ||
4K-8603 | [1] | PLUG-CUP | ||
24. | 2S-3029 | [1] | BALL BEARING | |
25. | 9W-6465 | [1] | RETAINER-BEARING | |
26. | 9S-4190 | [5] | PLUG-O-RING (7/8-14-THD) | |
27. | 2M-9780 | [6] | SEAL-O-RING | |
28. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
29. | 3J-1907 | [2] | SEAL-O-RING | |
30. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
31. | 190-1684 | [1] | PLATE AS | |
32. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
33. | 5P-4483 | [1] | PLUG | |
34. | 7M-8485 | [1] | SEAL-O-RING | |
35. | 6V-7981 M | [5] | BOLT (M10X1.5X70-MM) | |
36. | 6V-4248 M | [8] | BOLT (M10X1.5X25-MM) | |
37. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
38. | 9S-8005 | [4] | PLUG (3/4-16-THD) | |
39. | 6I-8642 | [4] | RACE-BEARING OUTER | |
40. | 5P-3924 | [2] | RACE-BEARING OUTER | |
41. | 9M-2042 | [1] | RACE-BEARING OUTER | |
42. | 248-2046 C | [1] | COVER AS | |
43. | 2H-6489 | [1] | RACE-BEARING OUTER | |
44. | 226-6621 | [1] | HARNESS AS-SENSOR | |
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
(EACH INCLUDES PLUG AS & WEDGE) | ||||
45. | 191-9256 | [2] | CLIP | |
46. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
47. | 6V-1720 | [1] | PLATE-SERIAL NUMBER (TRANSMISSION) | |
48. | 183-8597 CY | [2] | SENSOR GP-SPEED (TRANSMISSION OUTPUT) | |
49. | 201-0387 | [1] | CLIP AS | |
50. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
51. | 143-5373 | [1] | GUARD AS | |
52. | 5P-9299 | [1] | CLIP (LOOP) | |
53. | 3E-8700 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
54. | 4P-7581 | [1] | CLIP (LADDER) | |
55. | 164-4180 | [3] | PLUG AS | |
(EACH INCLUDES) | ||||
9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
7M-8485 | [1] | SEAL-O-RING | ||
56. | 1B-5174 | [1] | PLUG-PIPE | |
57. | 113-7745 | [1] | PLATE AS | |
58. | 7K-1181 | [1] | STRAP-CABLE | |
59. | 206-3713 | [1] | PLATE AS | |
60. | 145-8039 | [3] | LOCK | |
61. | 133-5631 | [1] | PLUG | |
62. | 5F-1678 | [1] | SEAL-O-RING | |
63. | 6V-5219 M | [4] | BOLT (M8X1.25X40-MM) | |
64. | 190-5212 | [1] | ROTOR | |
65. | 6V-8202 M | [4] | BOLT-SOCKET HEAD (M8X1.25X16-MM) | |
67. | 206-3714 | [1] | PLATE | |
68. | 6V-2317 M | [2] | BOLT (M8X1.25X30-MM) | |
69. | 191-8303 C | [1] | SENSOR GP-SPEED (LOW OUTPUT)(TRANSMISSION INPUT) | |
70. | 117-1385 C | [1] | SEAL-O-RING | |
71. | 9M-1974 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
72. | 6V-5215 CM | [1] | BOLT (M8X1.25X16-MM) | |
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0320 FMI 11 Speed/Timing Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Temperature Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Speed/Timing Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Disassembly and Assembly
Engine Oil Pressure Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
3176C and 3196 Engines For Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Position Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
3176C and 3196 Engines For Caterpillar Built Machines
Service Magazine