AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

260-6502 SWIVEL GP -CIRCLE DRIVE S/N APM2698-UP PART OF 159-4730 LINES GP-HYDRAULIC 140H MOTOR GRADER


HYDRAULIC SYSTEM
SWIVEL GP
TANK GP
VALVE & LINKAGE GP

MOTOR GRADER 140H MOTOR GRADER APM
 140H Motor Grader APM00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3293 140H APM   (2001)

HYDRAULIC SYSTEM

SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
 

#SEBP32930790
 

260-6502: SWIVEL GP

260-6502 SWIVEL GP -CIRCLE DRIVE
S/N APM2698-UP
PART OF 159-4730 LINES GP-HYDRAULIC
i02277258 SEBP3293
2606502 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 8J-2331 [7] SEAL  
3. 454-3032 [1] ROTOR  
4. 173-1009 [1] RETAINER  
5. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
6. 454-2957 [1] BODY  
7. 148-8395 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
8. 173-1007 [2] SEAL  
9. 2H-3928 [7] SEAL-O-RING  
10. 4J-9964 [2] SEAL  
  B   USE AS REQUIRED
 

#SEBP32930791
 

207-2410: TANK & FILTER GP-HYDRAULIC

207-2410 TANK & FILTER GP-HYDRAULIC
S/N APM1-UP
PART OF 207-2409 TANK & MTG GP-HYDRAULIC
i01645491 SEBP3293
2072410 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-2913 [1] PIN-CLEVIS  
2. 1R-0774 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)  
    -OR-
  4T-3134 [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)  
    -OR-
  139-1536 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
3. 2D-4202 [1] PLATE  
4. 3F-1547 [1] SEAL-O-RING  
6. 4M-6921 [1] WASHER-SPRING  
7. 5D-1911 [1] COVER-HYDRAULIC CAP  
8. 226-2871 [1] ROD  
9. 7H-1447 [1] CAP-FILLER (HYDRAULIC TANK)  
10. 9J-1979 [1] RETAINER AS  
13. 9J-3047 [1] STRAINER (HYDRAULIC OIL)  
14. 9M-7394 [1] LEVER (HYDRAULIC TANK FILL)  
15. 207-2411 [1] TANK AS-HYDRAULIC  
16. 226-2870 [1] CAP AS (HYDRAULIC TANK)  
17. 217-2661 [1] GAUGE-SIGHT (HYDRAULIC OIL)  
  5J-2974 [4] SEAL-O-RING  
  114-4231 [2] BOLT-MOUNTING  
18. 086-0507 [1] PIN  
19. 141-9661 [1] SPACER (20X128X6-MM THK)  
20. 1L-5072 [1] DOWEL  
21. 2J-7761 [1] RING-RETAINING  
22. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
23. 2S-5100 [1] VALVE-MANUAL  
24. 3G-0361 [1] GASKET  
26. 7D-1195 [1] SEAL-O-RING  
27. 8T-2275 [1] BALL  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 9H-6454 [1] GASKET  
31. 3B-4610 [1] PIN-COTTER  
  M   METRIC PART
 

#SEBP32930792
 

207-2409: TANK & MTG GP-HYDRAULIC

207-2409 TANK & MTG GP-HYDRAULIC
S/N APM1-UP
PART OF 159-4615 GENERAL AR
i01658236 SEBP3293
2072409 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP (HYDRAULIC TANK)  
  5P-8500 [1] KEY (PADLOCK, HYDRAULIC TANK)  
2. 207-2410 Y [1] TANK & FILTER GP-HYDRAULIC  
3. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
4. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32930793
 

107-3856: VALVE & LINKAGE GP

107-3856 VALVE & LINKAGE GP -5-BANK, RH; 7-BANK, LH
S/N APM1-UP
PART OF 179-4356 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02267097 SEBP3293
1073856 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
2. 104-8651 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
4A. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (CENTERSHIFT)  
5A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
7. 8W-0456 [3] SHAFT  
8. 8X-4277 [12] ROD AS  
9. 8D-5633 [1] LEVER (SIDESHIFT)  
9A. 8D-5633 [1] LEVER (WHEEL LEAN)  
10. 101-2458 [1] LEVER (WING LIFT)  
10A. 101-2458 [1] LEVER (BLADE TIP)  
10B. 101-2458 [1] LEVER (PLOW, DOZER)  
11. 137-4515 C [2] BUSHING  
12. 8D-5640 [14] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [24] LOCKWASHER  
18. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
19. 8D-5641 [12] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 CM [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
24A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
33. 2G-7108 [1] KNOB-WING TILT  
34. 103-1597 [1] LEVER (WING TILT)  
35. 2G-6740 [1] KNOB-RIPPER  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
40. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 104-7429 [2] PLATE  
44. 137-4516 C [1] SHAFT  
45. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
46. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
47. 2G-7107 [1] KNOB-WING LIFT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32930794
 

112-5499: VALVE & LINKAGE GP

112-5499 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N APM1-UP
PART OF 184-7303 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00123239 SEBP3293
1125499 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [2] LEVER  
3. 8D-5634 [2] LEVER  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
44. 104-8645 Y [1] VALVE GP-BANK 5 (LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32930795
 

115-0791: VALVE & LINKAGE GP

115-0791 VALVE & LINKAGE GP -6-BANK, RH, LH
S/N APM1-UP
AN ATTACHMENT
i00123368 SEBP3293
1150791 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-1008 Y [1] VALVE GP-BANK 6 (RH)  
2. 104-8648 Y [1] VALVE GP-BANK 6 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 8X-4277 [12] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 8D-5640 [14] BEARING  
10. 8D-5636 B [4] SHIM (0.254-MM THK)  
11. 8D-5637 B [4] SHIM (0.762-MM THK)  
12. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
13. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
14. 3F-9556 [24] LOCKWASHER  
15. 8D-5641 [12] BEARING  
16. 2G-6757 [1] KNOB-BLADE LIFT  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
18. 2G-6749 [1] KNOB-SIDESHIFT  
19. 2G-6747 [1] KNOB-BLADE TIP  
20. 8D-5632 [2] LEVER  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
30. 104-7419 [1] PLATE AS (RH)  
31. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 2G-7108 [1] KNOB-WING TILT  
35. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
36. 103-1597 [2] LEVER  
37. 2G-7107 [1] KNOB-WING LIFT  
38. 137-4515 [2] BUSHING  
39. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6V-8188 [2] NUT (1/2-13-THD)  
42. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
43. 8W-0456 [3] SHAFT  
44. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
45. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
46. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
47. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32930796
 

115-0805: VALVE & LINKAGE GP

115-0805 VALVE & LINKAGE GP -6-BANK, RH; 7-BANK, LH
S/N APM1-UP
PART OF 184-7304 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00123370 SEBP3293
1150805 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-1008 Y [1] VALVE GP-BANK 6 (RH)  
2. 104-8651 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 2G-7107 [1] KNOB-WING LIFT  
7. 8X-4277 [13] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
8. 8D-5633 [2] LEVER  
9. 101-2458 [3] LEVER  
10. 137-4515 [2] BUSHING  
11. 8D-5640 [15] BEARING  
12. 8D-5636 B [4] SHIM (0.254-MM THK)  
13. 8D-5637 B [4] SHIM (0.762-MM THK)  
14. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
15. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
16. 3F-9556 [26] LOCKWASHER  
17. 8D-5641 [13] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
32. 104-7419 [1] PLATE AS (RH)  
33. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
34. 104-7429 [2] PLATE  
35. 137-4516 [1] SHAFT  
36. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
42. 2G-6740 [1] KNOB-RIPPER  
43. 103-1597 [2] LEVER  
44. 2G-7108 [1] KNOB-WING TILT  
45. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
46. 8W-0456 [4] SHAFT  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32930797
 

121-4084: VALVE & LINKAGE GP

121-4084 VALVE & LINKAGE GP -5-BANK, RH; 7-BANK, LH
S/N APM1-UP
AN ATTACHMENT
i00123633 SEBP3293
1214084 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [2] LEVER  
5. 8D-5633 [2] LEVER  
6. 8D-5634 [2] LEVER  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [14] BEARING  
10. 8D-5641 [12] BEARING  
11. 8X-4277 [12] ROD AS  
    (EACH INCLUDES)
11A. 146-0705 [1] ROD  
11B. 7H-3641 [1] END-ROD (5/16-24-THD)  
11C. 8L-8598 [1] ROD END  
11D. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [2] LEVER  
15. 101-2458 [3] LEVER  
16. 103-1597 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
20. 137-4515 [2] BUSHING  
21. 137-4517 [1] SHAFT  
22. 130-3120 CY [1] VALVE GP-BANK 7 (LH)  
23. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
24. 2G-6747 [1] KNOB-BLADE TIP  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6749 [1] KNOB-SIDESHIFT  
27. 2G-6751 [1] KNOB-CIRCLE DRIVE  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6753 [1] KNOB-SCARIFIER  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 2G-7107 [1] KNOB-WING LIFT  
35. 2G-7108 [1] KNOB-WING TILT  
36. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
37. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
43. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
44. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
45. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32930798
 

121-4086: VALVE & LINKAGE GP

121-4086 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N APM1-UP
AN ATTACHMENT
i00123635 SEBP3293
1214086 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [2] LEVER  
5. 8D-5633 [2] LEVER  
6. 8D-5634 [2] LEVER  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [12] BEARING  
10. 8D-5641 [10] BEARING  
11. 8W-0456 [1] SHAFT  
12. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
12A. 146-0705 [1] ROD  
12B. 7H-3641 [1] END-ROD (5/16-24-THD)  
12C. 8L-8598 [1] ROD END  
12D. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [2] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 130-3119 CY [1] VALVE GP-BANK 5 (LH)  
23. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
24. 2G-6747 [1] KNOB-BLADE TIP  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6749 [1] KNOB-SIDESHIFT  
27. 2G-6751 [1] KNOB-CIRCLE DRIVE  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6753 [1] KNOB-SCARIFIER  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
35. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32930799
 

121-4090: VALVE & LINKAGE GP

121-4090 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N APM1-UP
PART OF 184-7308 CONTROL AR-HYDRAULIC
Type 1
AN ATTACHMENT
i00148366 SEBP3293
1214090 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-0554 Y [1] VALVE GP-BANK 4 (RH)  
2. 120-0556 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER  
5. 8D-5634 [1] LEVER  
6. 8X-4276 [9] ROD  
7. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
8. 7H-3641 [18] END-ROD (5/16-24-THD)  
9. 8X-4279 [2] SPACER (84-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
32. 104-7419 [1] PLATE AS (RH)  
33. 104-7429 [2] PLATE  
34. 9D-2804 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 8D-5633 [1] LEVER  
43. 101-2458 [1] LEVER  
44. 101-2457 [1] LEVER  
45. 8D-5634 [1] LEVER  
46. 8D-5632 [1] LEVER  
47. 8D-5633 [1] LEVER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140H :

SWIVEL GP
173-1011 SWIVEL GP
SWASHPLATE GP
169-3290 SWASHPLATE GP
166-3302 STEERING AR-SECONDARY
SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
194-9453 ROTATING GP-PUMP
ROTATING GP-PUMP
100-3412 ROTATING GP-PUMP
PUMP GP-PISTON
169-4883 PUMP GP-PISTON
PUMP GP-PISTON
169-4882 PUMP GP-PISTON
TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
207-2409 TANK & MTG GP-HYDRAULIC
VALVE & LINKAGE GP
107-3856 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-5499 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0791 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0805 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4084 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4086 VALVE & LINKAGE GP

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.