265-7822 VALVE & LINKAGE GP -6-BANK, RH; 7-BANK, LH S/N APM1-UP PART OF 265-7820 CONTROL AR-HYDRAULIC AN ATTACHMENT 140H

HYDRAULIC SYSTEM

VALVE & LINKAGE GP

0. 265-7822 VALVE & LI
1. 7I-4621 VALVE & LI
2. 7I-4622 VALVE & LI
3. 7I-4623 VALVE & LI
4. 7I-4624 VALVE & LI
5. 8X-1949 VALVE & LI
6. 8X-4280 VALVE & LI

VALVE GP-BANK

7. 120-0554 VALVE GP-B
8. 120-0554 VALVE GP-B
9. 130-3116 VALVE GP-B
0. INFORMATION

MOTOR GRADER 140H MOTOR GRADER APM
140H Motor Grader APM00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3293 140H APM (2001)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP

265-7817 VALVE & LINKAGE GP

265-7819 VALVE & LINKAGE GP

265-7822 VALVE & LINKAGE GP

7I-4621 VALVE & LINKAGE GP

7I-4622 VALVE & LINKAGE GP

7I-4623 VALVE & LINKAGE GP

#SEBP32930840

265-7822: VALVE & LINKAGE GP

VALVE & LINKAGE GP

265-7822 VALVE & LINKAGE GP -6-BANK, RH; 7-BANK, LH
S/N APM1-UP
PART OF 265-7820 CONTROL AR-HYDRAULIC
AN ATTACHMENT

i02312547 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3F-9556	[26]	LOCKWASHER
2.	6B-0933	[4]	SPACER (10.31X19.05X6.35-MM THK)
3.	6L-1962	[13]	NUT-JAM (3/8-24-THD)
4.	8D-5632	[1]	LEVER (CIRCLE DRIVE)
4A.	8D-5632	[1]	LEVER (BLADE LIFT, RH)
5.	8D-5633	[1]	LEVER (SIDESHIFT)
5A.	8D-5633	[1]	LEVER (WHEEL LEAN)
6.	8D-5634	[1]	LEVER (BLADE LIFT, LH)
6A.	8D-5634	[1]	LEVER (CENTERSHIFT)
7.	8D-5636 B	[4]	SHIM (0.254-MM THK)
8.	8D-5637 B	[4]	SHIM (0.762-MM THK)
9.	8D-5640	[15]	BEARING
10.	8D-5641	[13]	BEARING
11.	8W-0456	[1]	SHAFT
12.	8X-4277	[13]	ROD AS
			(EACH INCLUDES)
	8L-8598	[1]	ROD END
	146-0705	[1]	ROD
	6V-8186	[1]	NUT-FULL (5/16-24-THD)
	7H-3641	[1]	END-ROD (5/16-24-THD)
13.	8X-5499	[2]	RETAINER
14.	9M-1853	[6]	MOUNTING
15.	101-2457	[1]	LEVER (RIPPER)
15A.	101-2457	[1]	LEVER (ARTICULATION)
16.	101-2458	[1]	LEVER (PLOW, DOZER)
16A.	101-2458	[1]	LEVER (BLADE TIP)
16B.	101-2458	[1]	LEVER (WING LIFT)
17.	103-1597	[1]	LEVER (PLOW, BULLDOZER ANGLE)
17A.	103-1597	[1]	LEVER (WING TILT)
18.	104-7419	[1]	PLATE AS (RH)
	1F-0748	[2]	NUT-WELD (1/2-13-THD)
19.	104-7429	[2]	PLATE
20.	104-7740	[1]	PLATE AS (LH)
	1F-0748	[2]	NUT-WELD (1/2-13-THD)
21.	137-4515	[2]	BUSHING
22.	137-4517	[1]	SHAFT
23.	164-5608	[2]	CONNECTOR AS
			(EACH INCLUDES)
	8T-1687	[1]	CONNECTOR
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
24.	244-2587	[1]	TUBE AS
25.	244-2591	[1]	TUBE AS
26.	244-2594	[1]	TUBE AS
27.	244-2598	[1]	TUBE AS
28.	250-0574 Y	[1]	VALVE GP-BANK 6 (RH)
29.	117-0472	[1]	KNOB (DOZER ANGLE, SNOW PLOW)
30.	148-8318	[2]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8634	[1]	CONNECTOR
	6V-8397	[1]	SEAL-O-RING
	3K-0360	[1]	SEAL-O-RING
31.	206-5123	[2]	TEE AS
			(EACH INCLUDES)
	206-5122	[1]	TEE
	6V-8397	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
32.	263-6437 Y	[1]	VALVE GP-BANK 7 (LH)
33.	2G-6740	[1]	KNOB-RIPPER
34.	2G-6747	[1]	KNOB-BLADE TIP
35.	2G-6748	[1]	KNOB-BLADE LIFT
36.	2G-6749	[1]	KNOB-SIDESHIFT
37.	2G-6751	[1]	KNOB-CIRCLE DRIVE
38.	2G-6752	[1]	KNOB-ARTICULATION
39.	2G-6754	[1]	KNOB (BULLDOZER LIFT, PLOW)
40.	2G-6755	[1]	KNOB-CENTERSHIFT
41.	2G-6756	[1]	KNOB-WHEEL LEAN
42.	2G-6757	[1]	KNOB-BLADE LIFT
43.	2G-7107	[1]	KNOB-WING LIFT
44.	2G-7108	[1]	KNOB-WING TILT
45.	3J-1907	[4]	SEAL-O-RING
46.	4L-6459	[1]	BOLT (3/8-16X2.5-IN)
47.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
48.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
49.	5P-2424	[6]	BOLT (1/2-13X2.25-IN)
50.	6V-8188	[2]	NUT (1/2-13-THD)
51.	6V-8397	[8]	SEAL-O-RING
52.	6V-9836	[2]	TEE-SWIVEL
53.	8F-6437	[6]	WASHER (13.5X50.8X4.76-MM THK)
54.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
55.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
56.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
57.	8T-9041	[4]	CONNECTOR
58.	8T-9043	[26]	BOLT (5/16-18X0.875-IN)
59.	9B-7237	[1]	BOLT (3/8-16X1.25-IN)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930841

7I-4621: VALVE & LINKAGE GP

VALVE & LINKAGE GP

7I-4621 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N APM1-UP
AN ATTACHMENT

i00122355 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	104-8671 Y	[1]	VALVE GP-BANK 5 (RH)
2.	104-8646 Y	[1]	VALVE GP-BANK 5 (LH)
3.	8X-5499	[2]	RETAINER
4.	101-2457	[2]	LEVER
5.	8D-5634	[2]	LEVER
6.	4L-6459	[1]	BOLT (3/8-16X2.5-IN)
7.	8W-0456	[1]	SHAFT
8.	8X-4277	[10]	ROD AS
			(EACH INCLUDES)
	146-0705	[1]	ROD
	6V-8186	[1]	NUT-FULL (5/16-24-THD)
	7H-3641	[1]	END-ROD (5/16-24-THD)(RH)
	8L-8598	[1]	ROD END
9.	8D-5633	[2]	LEVER
10.	101-2458	[2]	LEVER
11.	137-4515	[2]	BUSHING
12.	8D-5640	[12]	BEARING
13.	8D-5636 B	[4]	SHIM (0.254-MM THK)
14.	8D-5637 B	[4]	SHIM (0.762-MM THK)
15.	6L-1962	[10]	NUT-JAM (3/8-24-THD)
16.	8T-9043	[20]	BOLT (5/16-18X0.875-IN)
17.	3F-9556	[20]	LOCKWASHER
18.	9B-7237	[1]	BOLT (3/8-16X1.25-IN)
19.	8D-5641	[10]	BEARING
20.	2G-6757	[1]	KNOB-BLADE LIFT (LH)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	2G-6749	[1]	KNOB-SIDESHIFT
23.	2G-6747	[1]	KNOB-BLADE TIP
24.	8D-5632	[2]	LEVER
25.	2G-6751	[1]	KNOB-CIRCLE DRIVE
26.	2G-6748	[1]	KNOB-BLADE LIFT (RH)
27.	2G-6756	[1]	KNOB-WHEEL LEAN
28.	2G-6752	[1]	KNOB-ARTICULATION
29.	2G-6755	[1]	KNOB-CENTERSHIFT
30.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
31.	9M-1853	[6]	MOUNTING
32.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
33.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
34.	6V-8188	[2]	NUT (1/2-13-THD)
35.	5P-2424	[6]	BOLT (1/2-13X2.25-IN)
36.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
37.	6B-0933	[4]	SPACER (10.31X19.05X6.35-MM THK)
38.	104-7740	[1]	PLATE AS (LH)
39.	104-7419	[1]	PLATE AS (RH)
			(EA PLATE AS INCL)
40.	1F-0748	[2]	NUT-WELD (1/2-13-THD)
41.	2G-6753	[1]	KNOB-SCARIFIER
42.	137-4516	[1]	SHAFT
43.	104-7429	[2]	PLATE
44.	8F-6437	[6]	WASHER (13.5X50.8X4.76-MM THK)
45.	2G-6754	[1]	KNOB (BULLDOZER LIFT, PLOW)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930842

7I-4622: VALVE & LINKAGE GP

VALVE & LINKAGE GP

7I-4622 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N APM1-UP
PART OF 166-3305 CONTROL AR-HYDRAULIC
AN ATTACHMENT

i00122356 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	6E-3032 Y	[1]	VALVE GP-BANK 4 (RH)
2.	104-8645 Y	[1]	VALVE GP-BANK 5 (LH)
3.	8X-5499	[2]	RETAINER
4.	101-2457	[2]	LEVER
5.	8D-5634	[2]	LEVER
6.	8X-4277	[9]	ROD AS
			(EACH INCLUDES)
	146-0705	[1]	ROD
	6V-8186	[1]	NUT-FULL (5/16-24-THD)
	7H-3641	[1]	END-ROD (5/16-24-THD)(RH)
	8L-8598	[1]	ROD END
9.	8D-5633	[2]	LEVER
10.	101-2458	[1]	LEVER
11.	137-4515	[2]	BUSHING
12.	8D-5640	[11]	BEARING
13.	8D-5636 B	[4]	SHIM (0.254-MM THK)
14.	8D-5637 B	[4]	SHIM (0.762-MM THK)
15.	6L-1962	[9]	NUT-JAM (3/8-24-THD)
16.	8T-9043	[18]	BOLT (5/16-18X0.875-IN)
17.	3F-9556	[18]	LOCKWASHER
18.	9B-7237	[2]	BOLT (3/8-16X1.25-IN)
19.	8D-5641	[9]	BEARING
20.	2G-6757	[1]	KNOB-BLADE LIFT (LH)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	2G-6749	[1]	KNOB-SIDESHIFT
23.	2G-6747	[1]	KNOB-BLADE TIP
24.	8D-5632	[2]	LEVER
25.	2G-6751	[1]	KNOB-CIRCLE DRIVE
26.	2G-6748	[1]	KNOB-BLADE LIFT (RH)
27.	2G-6756	[1]	KNOB-WHEEL LEAN
28.	2G-6752	[1]	KNOB-ARTICULATION
29.	2G-6755	[1]	KNOB-CENTERSHIFT
30.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
31.	9M-1853	[6]	MOUNTING
32.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
33.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
34.	6V-8188	[2]	NUT (1/2-13-THD)
35.	5P-2424	[6]	BOLT (1/2-13X2.25-IN)
36.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
37.	6B-0933	[4]	SPACER (10.31X19.05X6.35-MM THK)
38.	104-7740	[1]	PLATE AS (LH)
39.	104-7419	[1]	PLATE AS (RH)
			(EA PLATE AS INCL)
40.	1F-0748	[2]	NUT-WELD (1/2-13-THD)
41.	2G-6740	[1]	KNOB-RIPPER
42.	137-4516	[1]	SHAFT
43.	104-7429	[2]	PLATE
44.	8F-6437	[6]	WASHER (13.5X50.8X4.76-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930843

7I-4623: VALVE & LINKAGE GP

VALVE & LINKAGE GP

7I-4623 VALVE & LINKAGE GP -5-BANK, RH; 6-BANK, LH
S/N APM1-UP
AN ATTACHMENT

i00122357 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	104-8671 Y	[1]	VALVE GP-BANK 5 (RH)
2.	104-8648 Y	[1]	VALVE GP-BANK 6 (LH)
3.	8X-5499	[2]	RETAINER
4.	101-2457	[2]	LEVER
5.	8D-5634	[2]	LEVER
6.	8X-4277	[11]	ROD AS
			(EACH INCLUDES)
	146-0705	[1]	ROD
	6V-8186	[1]	NUT-FULL (5/16-24-THD)
	7H-3641	[1]	END-ROD (5/16-24-THD)(RH)
	8L-8598	[1]	ROD END
9.	8D-5633	[2]	LEVER
10.	101-2458	[2]	LEVER
11.	4L-6459	[2]	BOLT (3/8-16X2.5-IN)
12.	8D-5640	[13]	BEARING
13.	8D-5636 B	[4]	SHIM (0.254-MM THK)
14.	8D-5637 B	[4]	SHIM (0.762-MM THK)
15.	6L-1962	[11]	NUT-JAM (3/8-24-THD)
16.	8T-9043	[22]	BOLT (5/16-18X0.875-IN)
17.	3F-9556	[22]	LOCKWASHER
18.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
19.	8D-5641	[11]	BEARING
20.	2G-6757	[1]	KNOB-BLADE LIFT (LH)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	2G-6749	[1]	KNOB-SIDESHIFT
23.	2G-6747	[1]	KNOB-BLADE TIP
24.	8D-5632	[2]	LEVER
25.	2G-6751	[1]	KNOB-CIRCLE DRIVE
26.	2G-6748	[1]	KNOB-BLADE LIFT (RH)
27.	2G-6756	[1]	KNOB-WHEEL LEAN
28.	2G-6752	[1]	KNOB-ARTICULATION
29.	2G-6755	[1]	KNOB-CENTERSHIFT
30.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
31.	9M-1853	[6]	MOUNTING
32.	8W-0456	[2]	SHAFT
33.	8F-6437	[6]	WASHER (13.5X50.8X4.76-MM THK)
34.	6V-8188	[2]	NUT (1/2-13-THD)
35.	5P-2424	[6]	BOLT (1/2-13X2.25-IN)
36.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
37.	6B-0933	[4]	SPACER (10.31X19.05X6.35-MM THK)
38.	104-7740	[1]	PLATE AS (LH)
39.	104-7419	[1]	PLATE AS (RH)
41.	137-4515	[2]	BUSHING
42.	2G-7107	[1]	KNOB-WING LIFT
43.	104-7429	[2]	PLATE
44.	137-4516	[1]	SHAFT
45.	2G-7108	[1]	KNOB-WING TILT
46.	2G-6754	[1]	KNOB (BULLDOZER LIFT, PLOW)
47.	103-1597	[1]	LEVER
48.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930844

7I-4624: VALVE & LINKAGE GP

VALVE & LINKAGE GP

7I-4624 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N APM1-UP
AN ATTACHMENT

i00122358 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	6E-3032 Y	[1]	VALVE GP-BANK 4 (RH)
2.	104-8646 Y	[1]	VALVE GP-BANK 5 (LH)
3.	8X-5499	[2]	RETAINER
4.	101-2457	[2]	LEVER
5.	8D-5634	[2]	LEVER
6.	8X-4277	[9]	ROD AS
			(EACH INCLUDES)
	146-0705	[1]	ROD
	8L-8598	[1]	ROD END
7.	6V-8186	[1]	NUT-FULL (5/16-24-THD)
8.	7H-3641	[1]	END-ROD (5/16-24-THD)
9.	8D-5633	[2]	LEVER
10.	101-2458	[1]	LEVER
11.	137-4515	[2]	BUSHING
12.	8D-5640	[11]	BEARING
13.	8D-5636 B	[4]	SHIM (0.254-MM THK)
14.	8D-5637 B	[4]	SHIM (0.762-MM THK)
15.	6L-1962	[9]	NUT-JAM (3/8-24-THD)
16.	8T-9043	[18]	BOLT (5/16-18X0.875-IN)
17.	3F-9556	[18]	LOCKWASHER
18.	9B-7237	[2]	BOLT (3/8-16X1.25-IN)
19.	8D-5641	[9]	BEARING
20.	2G-6757	[1]	KNOB-BLADE LIFT (LH)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	2G-6749	[1]	KNOB-SIDESHIFT
23.	2G-6747	[1]	KNOB-BLADE TIP
24.	8D-5632	[2]	LEVER
25.	2G-6751	[1]	KNOB-CIRCLE DRIVE
26.	2G-6748	[1]	KNOB-BLADE LIFT (RH)
27.	2G-6756	[1]	KNOB-WHEEL LEAN
28.	2G-6752	[1]	KNOB-ARTICULATION
29.	2G-6755	[1]	KNOB-CENTERSHIFT
30.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
31.	9M-1853	[6]	MOUNTING
32.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
33.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
34.	6V-8188	[2]	NUT (1/2-13-THD)
35.	5P-2424	[6]	BOLT (1/2-13X2.25-IN)
36.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
37.	6B-0933	[4]	SPACER (10.31X19.05X6.35-MM THK)
38.	104-7740	[1]	PLATE AS (LH)
39.	104-7419	[1]	PLATE AS (RH)
			(EACH INCLUDES)
40.	1F-0748	[2]	NUT-WELD (1/2-13-THD)
41.	2G-6753	[1]	KNOB-SCARIFIER
42.	137-4516	[1]	SHAFT
43.	104-7429	[2]	PLATE
44.	8F-6437	[6]	WASHER (13.5X50.8X4.76-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930845

8X-1949: VALVE & LINKAGE GP

VALVE & LINKAGE GP

8X-1949 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N APM1-UP
PART OF 159-4615 GENERAL AR

i00122646 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	6E-3032 Y	[1]	VALVE GP-BANK 4 (RH)
2.	6E-3038 Y	[1]	VALVE GP-BANK 4 (LH)
3.	8X-5498	[2]	RETAINER
4.	101-2457	[1]	LEVER
5.	8D-5634	[2]	LEVER
6.	8F-6437	[6]	WASHER (13.5X50.8X4.76-MM THK)
7.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
8.	8X-4277	[8]	ROD AS
			(EACH INCLUDES)
	146-0705	[1]	ROD
	6V-8186	[1]	NUT-FULL (5/16-24-THD)
	7H-3641	[1]	END-ROD (5/16-24-THD)(RH)
	8L-8598	[1]	ROD END
9.	8D-5633	[2]	LEVER
10.	101-2458	[1]	LEVER
11.	137-4515	[2]	BUSHING
12.	8D-5640	[10]	BEARING
13.	8D-5636 B	[4]	SHIM (0.254-MM THK)
14.	8D-5637 B	[4]	SHIM (0.762-MM THK)
15.	6L-1962	[8]	NUT-JAM (3/8-24-THD)
16.	8T-9043	[16]	BOLT (5/16-18X0.875-IN)
17.	3F-9556	[16]	LOCKWASHER
18.	9B-7237	[2]	BOLT (3/8-16X1.25-IN)
19.	8D-5641	[8]	BEARING
20.	2G-6757	[1]	KNOB-BLADE LIFT (LH)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	2G-6749	[1]	KNOB-SIDESHIFT
23.	2G-6747	[1]	KNOB-BLADE TIP
24.	8D-5632	[2]	LEVER
25.	2G-6751	[1]	KNOB-CIRCLE DRIVE
26.	2G-6748	[1]	KNOB-BLADE LIFT (RH)
27.	2G-6756	[1]	KNOB-WHEEL LEAN
28.	2G-6752	[1]	KNOB-ARTICULATION
29.	2G-6755	[1]	KNOB-CENTERSHIFT
30.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
31.	9M-1853	[6]	MOUNTING
32.	6V-8188	[2]	NUT (1/2-13-THD)
33.	5P-2424	[6]	BOLT (1/2-13X2.25-IN)
34.	6B-0933	[4]	SPACER (10.31X19.05X6.35-MM THK)
35.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
36.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
37.	137-4516	[1]	SHAFT
38.	104-7740	[1]	PLATE AS (LH)
39.	104-7419	[1]	PLATE AS (RH)
			(EACH PLATE AS INCLUDES)
	1F-0748	[2]	NUT-WELD (1/2-13-THD)
40.	104-7429	[2]	PLATE
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930846

8X-4280: VALVE & LINKAGE GP

VALVE & LINKAGE GP

8X-4280 VALVE & LINKAGE GP -5-BANK, RH; 7-BANK, LH
S/N APM1-UP
AN ATTACHMENT

i00122726 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	104-8671 Y	[1]	VALVE GP-BANK 5 (RH)
2.	104-8647 Y	[1]	VALVE GP-BANK 7 (LH)
3.	8X-5499	[2]	RETAINER
4.	101-2457	[2]	LEVER
5.	8D-5634	[2]	LEVER
6.	2G-7107	[1]	KNOB-WING LIFT
7.	8X-4276	[12]	ROD
8.	7H-3641	[24]	END-ROD (5/16-24-THD)
9.	6V-8186	[24]	NUT-FULL (5/16-24-THD)
10.	101-2458	[3]	LEVER
11.	137-4515	[2]	BUSHING
12.	8D-5640	[14]	BEARING
13.	8D-5636 B	[4]	SHIM (0.254-MM THK)
14.	8D-5637 B	[4]	SHIM (0.762-MM THK)
15.	6L-1962	[12]	NUT-JAM (3/8-24-THD)
16.	8T-9043	[24]	BOLT (5/16-18X0.875-IN)
17.	3F-9556	[24]	LOCKWASHER
18.	4L-6459	[1]	BOLT (3/8-16X2.5-IN)
19.	8D-5641	[12]	BEARING
20.	2G-6757	[1]	KNOB-BLADE LIFT
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	2G-6749	[1]	KNOB-SIDESHIFT
23.	2G-6747	[1]	KNOB-BLADE TIP
24.	8D-5632	[2]	LEVER
25.	2G-6751	[1]	KNOB-CIRCLE DRIVE
26.	2G-6748	[1]	KNOB-BLADE LIFT
27.	2G-6756	[1]	KNOB-WHEEL LEAN
28.	2G-6752	[1]	KNOB-ARTICULATION
29.	2G-6755	[1]	KNOB-CENTERSHIFT
30.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
31.	9M-1853	[6]	MOUNTING
32.	104-7740	[1]	PLATE AS (LH)
34.	104-7419	[1]	PLATE AS (RH)
36.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
37.	8F-6437	[6]	WASHER (13.5X50.8X4.76-MM THK)
38.	8D-5633	[2]	LEVER
39.	103-1597	[1]	LEVER
40.	8W-0456	[3]	SHAFT
41.	7X-0291	[1]	BOLT (3/8-16X3.75-IN)
42.	2G-7108	[1]	KNOB-WING TILT
43.	104-7429	[2]	PLATE
44.	137-4516	[1]	SHAFT
45.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
46.	6B-0933	[4]	SPACER (10.31X19.05X6.35-MM THK)
47.	5P-2424	[6]	BOLT (1/2-13X2.25-IN)
48.	6V-8188	[2]	NUT (1/2-13-THD)
49.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
50.	2G-6754	[1]	KNOB (BULLDOZER LIFT, PLOW)
51.	2G-6753	[1]	KNOB-SCARIFIER
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930847

120-0554: VALVE GP-BANK 4

VALVE GP-BANK 4

120-0554 VALVE GP-BANK 4 -RH
S/N APM1-UP
PART OF 121-4090 VALVE & LINKAGE GP
Type 1
AN ATTACHMENT

i00123617 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	7X-2546 M	[2]	BOLT (M10X1.5X180-MM)
2.	137-6720 M	[1]	BOLT (M10X1.5X160-MM)
3.	102-6238	[1]	MANIFOLD
4.	101-0509	[5]	SEAL-INTEGRAL
5.	6E-3028 Y	[1]	VALVE GP-CONTROL (ARTICULATION)
6.	6E-3029 Y	[1]	VALVE GP-CONTROL (CENTERSHIFT)
7.	6E-3030 Y	[1]	VALVE GP-CONTROL (WHEEL LEAN)
8.	119-9545 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)
9.	101-9346	[1]	COVER
10.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
11.	4J-7533	[1]	SEAL-O-RING
12.	9S-4180	[1]	PLUG
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930848

120-0554: VALVE GP-BANK 4

VALVE GP-BANK 4

120-0554 VALVE GP-BANK 4 -RH
S/N APM1-UP
PART OF 121-4090 VALVE & LINKAGE GP
Type 2
AN ATTACHMENT

i03747086 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	7X-2546 M	[2]	BOLT (M10X1.5X180-MM)
2.	137-6720 M	[1]	BOLT (M10X1.5X160-MM)
3.	102-6238	[1]	MANIFOLD
4.	101-0509	[5]	SEAL-INTEGRAL
5.	6E-3028 Y	[1]	VALVE GP-CONTROL (ARTICULATION)
6.	6E-3029 Y	[1]	VALVE GP-CONTROL (CENTERSHIFT)
7.	6E-3030 Y	[1]	VALVE GP-CONTROL (WHEEL LEAN)
8.	124-3333 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)
9.	101-9346	[1]	COVER
10.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
11.	222-4737	[1]	PLUG AS
	9S-4180	[1]	PLUG
	4J-7533	[1]	SEAL-O-RING
12.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32930849

130-3116: VALVE GP-BANK 4

VALVE GP-BANK 4

130-3116 VALVE GP-BANK 4 -RH
S/N APM1-UP
PART OF 121-4090, 121-4095, 125-2235 VALVE & LINKAGE GP
AN ATTACHMENT

i00123840 SEBP3293

For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	7X-2546 M	[2]	BOLT (M10X1.5X180-MM)
2.	137-6720 M	[1]	BOLT (M10X1.5X160-MM)
3.	102-6238	[1]	MANIFOLD
4.	101-0509	[5]	SEAL-INTEGRAL
5.	6E-3028 Y	[1]	VALVE GP-CONTROL (ARTICULATION)
6.	6E-3029 Y	[1]	VALVE GP-CONTROL (CENTERSHIFT)
7.	6E-3030 Y	[1]	VALVE GP-CONTROL (WHEEL LEAN)
8.	128-8647 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)
9.	101-9346	[1]	COVER
10.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
11.	222-4737	[1]	PLUG AS
	9S-4180	[1]	PLUG
	4J-7533	[1]	SEAL-O-RING
12.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION