AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

283-1068 EDGE-CUTTING -SERRATED S/N APM1-UP 7-FT X 8-IN AN ATTACHMENT 140H MOTOR GRADER


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP
RIPPER GP

MOTOR GRADER 140H MOTOR GRADER APM
 140H Motor Grader APM00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3293 140H APM   (2001)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
107-3425 EDGE GP-CUTTING
107-3426 EDGE GP-CUTTING
EDGE-CUTTING
283-1068 EDGE-CUTTING
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
 

#SEBP32931190
 

283-1068: EDGE-CUTTING

283-1068 EDGE-CUTTING -SERRATED
S/N APM1-UP
7-FT X 8-IN
AN ATTACHMENT
i02665166 SEBP3293
2831068 EDGE-CUTTING Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP32931191
 

110-5326: EXTENSION GP-BLADE

110-5326 EXTENSION GP-BLADE -RH
S/N APM1-UP
2-FT
AN ATTACHMENT
i00123135 SEBP3293
1105326 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
2. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
3. 176-5639 [1] PLATE AS  
4. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
5. 110-5336 [1] ANGLE AS  
6. 110-5334 [3] SPACER (3-MM THK)  
7. 3G-2165 [1] EDGE-CUTTING  
8. 133-7523 [1] EXTENSION  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP32931192
 

110-5327: EXTENSION GP-BLADE

110-5327 EXTENSION GP-BLADE -LH
S/N APM1-UP
2-FT
AN ATTACHMENT
i00123136 SEBP3293
1105327 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7524 [1] EXTENSION  
2. 3G-2165 [1] EDGE-CUTTING  
3. 452-3134 [1] PLATE AS  
4. 110-5334 [3] SPACER (3-MM THK)  
5. 110-5335 [1] ANGLE AS  
6. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
7. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
8. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP32931193
 

203-8466: EXTENSION GP-BLADE

203-8466 EXTENSION GP-BLADE -LH
S/N APM1-UP
2-FT
AN ATTACHMENT
i01528457 SEBP3293
2038466 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-7564 [1] ANGLE AS  
2. 6G-8623 [1] EDGE-CUTTING  
3. 9B-1565 [2] SPACER (3-MM THK)  
4. 145-3261 [1] EXTENSION  
5. 176-5640 [1] PLATE AS  
6. 176-5642 B [1] SPACER (2-MM THK)  
7. 176-5643 B [2] SPACER (1-MM THK)  
8. 3F-5108 [5] BOLT-PLOW (5/8-11X2.25-IN)  
9. 4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
10. 4K-0367 [15] NUT-FULL (5/8-11-THD)  
11. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
12. 9X-8880 [2] BOLT (5/8-11X2-IN)  
  B   USE AS REQUIRED
 

#SEBP32931194
 

203-8467: EXTENSION GP-BLADE

203-8467 EXTENSION GP-BLADE -RH
S/N APM1-UP
2-FT
AN ATTACHMENT
i01528466 SEBP3293
2038467 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-7563 [1] ANGLE AS  
2. 6G-8623 [1] EDGE-CUTTING  
3. 9B-1565 [2] SPACER (3-MM THK)  
4. 145-4953 [1] EXTENSION  
5. 176-5641 [1] PLATE AS  
6. 176-5642 B [1] SPACER (2-MM THK)  
7. 176-5643 B [2] SPACER (1-MM THK)  
8. 3F-5108 [5] BOLT-PLOW (5/8-11X2.25-IN)  
9. 4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
10. 4K-0367 [15] NUT-FULL (5/8-11-THD)  
11. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
12. 9X-8880 [2] BOLT (5/8-11X2-IN)  
  B   USE AS REQUIRED
 

#SEBP32931195
 

524-8606: EXTENSION GP-BLADE

524-8606 EXTENSION GP-BLADE
S/N APM1-UP
BLADE ATTACHMENT KIT
FIELD INSTALLATION
i06922175 SEBP3293
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-5336 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-2165 [1] EDGE-CUTTING  
  133-7523 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  176-5639 [1] PLATE AS  
  110-5334 [3] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP32931196
 

8W-3330: EXTENSION GP-BLADE

8W-3330 EXTENSION GP-BLADE -RH
S/N APM1-UP
2-FT
AN ATTACHMENT
i00122503 SEBP3293
8W3330 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5641 [1] PLATE AS  
4. 4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2214 [1] EXTENSION  
6. 9W-1835 [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3-MM THK)  
8. 6D-7563 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP32931197
 

8W-3332: EXTENSION GP-BLADE

8W-3332 EXTENSION GP-BLADE -LH
S/N APM1-UP
2-FT
AN ATTACHMENT
i00122504 SEBP3293
8W3332 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5640 [1] PLATE AS  
4. 4F-3658 C [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2213 [1] EXTENSION (LH)  
6. 9W-1835 C [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3-MM THK)  
8. 6D-7564 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5643 B [2] SPACER (1-MM THK)  
12. 176-5642 B [1] SPACER (2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP32931198
 

8X-1935: LIFT GP-BLADE

8X-1935 LIFT GP-BLADE
S/N APM1-UP
PART OF 159-4615 GENERAL AR
i00122636 SEBP3293
8X1935 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
3. 7D-8891 [2] RETAINER  
4. 8X-3616 [1] ARM AS (RH)  
5. 7D-8889 [1] BEARING (76.35-MM ID)  
6. 8D-8168 [1] BEARING (63.65-MM ID)  
7. 2J-3506 [6] NUT-FULL (3/4-10-THD)  
  3B-6753 [6] BOLT (3/4-10X4.75-IN)  
8. 5P-8248 [16] WASHER-HARD (20X36.5X3.5-MM THK)  
9. 8X-5106 [1] STUD-BALL  
10. 8D-4332 [2] PIN  
11. 8X-5110 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
12. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
  9S-1366 [1] BOLT (1/2-13X2.5-IN)  
13. 8X-5109 [1] BAR AS  
14. 8X-5108 [2] BUSHING  
15. 124-5836 [5] BUSHING  
16. 0S-1756 [4] BOLT (3/4-10X4.25-IN)  
17. 9D-3583 [2] LOCK  
18. 7H-2444 [2] SEAL-O-RING  
19. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
20. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
21. 7D-8879 B [8] SHIM (0.127-MM THK)  
22. 7D-8881 B [6] SHIM (0.254-MM THK)  
23. 7D-8882 B [2] SHIM (0.508-MM THK)  
24. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
25. 5F-0149 [2] SEAL-O-RING  
26. 7D-8883 [2] SEAL  
27. 8X-5107 [1] PIN  
28. 3P-1461 [4] SEAL-LIP TYPE  
29. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
30. 8X-5111 [2] LOCK  
31. 7D-8884 [2] SEAL  
32. 8X-3615 [1] ARM AS (LH)  
  8D-8168 [1] BEARING (63.65-MM ID)  
  7D-8889 [1] BEARING (76.35-MM ID)  
33. 124-0435 [1] PLATE  
34. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
35. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP32931199
 

177-6821: MOUNTING GP-RIPPER

177-6821 MOUNTING GP-RIPPER
S/N APM1-UP
PART OF 175-2559 RIPPER AR
AN ATTACHMENT
i01631396 SEBP3293
1776821 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)  
3. 6P-5647 [2] BOSS  
4. 8E-6130 [2] LINK AS  
    (EACH INCLUDES)
  2K-4233 [1] BOSS  
5. 104-4523 [2] CAM AS  
6. 177-6822 [1] PLATE AS  
7. 109-6776 [2] PIN  
8. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
9. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
10. 7X-0292 [4] BOLT (3/8-16X4.5-IN)  
11. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
12. 7X-0403 [10] BOLT (1-8X2.25-IN)  
13. 8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
14. 9W-7469 [2] PIN  
15. 9W-7470 [2] PIN  
 

Information:

Special Instruction
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog 140H :

107-3426 EDGE GP-CUTTING
107-3425 EDGE GP-CUTTING
107-3397 EDGE GP-CUTTING
107-3396 EDGE GP-CUTTING
107-3393 EDGE GP-CUTTING
107-3392 EDGE GP-CUTTING
BRACKET GP-SCARIFIER
116-0379 BRACKET GP-SCARIFIER
BLADE GP
8X-8016 BLADE GP
EXTENSION GP-BLADE
110-5326 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
EXTENSION GP-BLADE
203-8466 EXTENSION GP-BLADE
EXTENSION GP-BLADE
203-8467 EXTENSION GP-BLADE
524-8606 EXTENSION GP-BLADE
EXTENSION GP-BLADE
8W-3330 EXTENSION GP-BLADE
EXTENSION GP-BLADE
8W-3332 EXTENSION GP-BLADE
LIFT GP-BLADE
8X-1935 LIFT GP-BLADE

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.