AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

131-6679 AIR COMPRESSOR GP S/N 3PD4428-UP 13.2 CFM AT 1250 RPM PART OF 234-2413 AIR COMPRESSOR GP 160H


BASIC ENGINE
AIR COMPRESSOR GP
BELT TIGHTENER GP
CAMSHAFT GP
CYLINDER BLOCK GP
CRANKSHAFT GP
CYLINDER BLOCK GP

MOTOR GRADER 160H MOTOR GRADER ASD
 160H Motor Grader ASD00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3294 160H ASD   (2001)

BASIC ENGINE

AIR COMPRESSOR GP
AIR COMPRESSOR GP
131-6679 AIR COMPRESSOR GP
AIR COMPRESSOR GP
131-6679 AIR COMPRESSOR GP
AIR COMPRESSOR GP
133-7031 AIR COMPRESSOR GP
AIR COMPRESSOR GP
234-2413 AIR COMPRESSOR GP
 

#SEBP32940010
 

131-6679: AIR COMPRESSOR GP

131-6679 AIR COMPRESSOR GP
S/N 3PD4428-UP
13.2 CFM AT 1250 RPM
PART OF 234-2413 AIR COMPRESSOR GP
i03813789 SEBP3294
1316679 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-5572 [1] VALVE AS-RELIEF (AIR COMPRESSOR)  
2. 7E-8928 [1] GASKET  
3. 3B-4505 [4] LOCKWASHER  
4. 4P-3977 [1] GASKET-CYLINDER HEAD  
5. 0S-1617 [12] BOLT (5/16-18X0.75-IN)  
6. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
7. 4P-3966 [1] PISTON & ROD AS  
8. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
9. 0L-1352 [6] BOLT (3/8-16X3.25-IN)  
10. 146-0835 [2] STUD  
11. 2H-3934 [1] SEAL-O-RING  
12. 103-6216 [1] KEY-WOODRUFF  
   
    AVAILABLE REPAIR KIT(S):
  7E-8923 [1] KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)  
    (INCLUDES SEALS, BEARINGS, INSERTS, GASKETS & WASHER)
  164-7572 [1] KIT-RING (AIR COMPRESSOR)  
    (INCLUDES RINGS)
  7E-8926 [1] KIT-CYLINDER HEAD (AIR COMPRESSOR)  
    (INCLUDES GASKETS, PISTONS, SPRINGS, VALVES, SEATS & O-RING)
  150-5146 [1] KIT-UNLOADER (AIR COMPRESSOR)  
 

#SEBP32940011
 

133-7031: AIR COMPRESSOR GP

133-7031 AIR COMPRESSOR GP
S/N 3PD1-4427
13.2 CFM AT 1250 RPM. TWO CYLINDER, SINGLE STAGE, 1.14:1 RATIO
PART OF 161-1751 ENGINE AR
i00503593 SEBP3294
1337031 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0428 I [1] HOSE AS  
2. 7W-5499 [1] ELBOW  
3. 6V-8197 M [3] BOLT (M12X1.75X40-MM)  
4. 8M-7065 [1] GASKET (AIR INLET)  
5. 9M-2904 [1] CLAMP-HOSE  
6. 172-4702 [2] CLAMP  
7. 9Y-1116 I [1] HOSE AS  
8. 032-3631 [1] ELBOW  
9. 090-8635 [1] SPACER (11X22X5-MM THK)  
10. 117-0221 [1] RING-PILOT  
11. 126-0146 [1] HOSE-FUMES DISPOSAL  
12. 128-0331 [1] HOSE  
13. 128-0420 [1] GEAR (42-TEETH)  
14. 129-2181 [1] SEAL-INTEGRAL  
15. 131-2171 [1] CONNECTOR  
16. 131-6679 Y [1] AIR COMPRESSOR GP  
17. 153-7062 [1] BRACKET  
18. 166-6352 [1] TUBE AS (M10X1.50X25MM)  
19. 005-0658 [1] ELBOW-FLARED  
19A. 6V-5063 [1] SEAL-O-RING  
20. 001-7043 [1] ELBOW (12.7MM ID)  
21. 118-4728 [1] ELBOW  
22. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
23. 2S-2053 [1] CLIP (LOOP)  
24. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
25. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 5S-0003 [2] NUT (5/16-18-THD)  
27. 6D-4244 [1] CLIP (LOOP)  
28. 6M-7476 [1] ELBOW  
29. 6V-3251 [2] SEAL-O-RING  
30. 6V-4248 M [3] BOLT (M10X1.5X25-MM)  
31. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
32. 6V-6609 [1] SEAL-O-RING  
33. 6V-7742 M [1] NUT-FULL (M20X2.5-THD)  
34. 8L-6557 [1] CONNECTOR  
35. 8M-2770 [1] CLIP (LOOP)  
36. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
37. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
38. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940012
 

234-2413: AIR COMPRESSOR GP

234-2413 AIR COMPRESSOR GP
S/N 3PD4428-UP
PART OF 161-1751, 285-6406 ENGINE AR
i01931664 SEBP3294
2342413 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0428 I [1] HOSE AS  
2. 7W-5499 [1] ELBOW  
3. 6V-8197 M [3] BOLT (M12X1.75X40-MM)  
4. 8M-7065 [1] GASKET (AIR INLET)  
5. 9M-2904 [1] CLAMP-HOSE  
6. 9Y-1116 I [1] HOSE AS  
7. 032-3631 [1] ELBOW  
8. 090-8635 [1] SPACER (11X22X5-MM THK)  
9. 117-0221 [1] RING-PILOT  
10. 126-0146 [1] HOSE-FUMES DISPOSAL  
11. 128-0331 [1] HOSE  
12. 128-0420 [1] GEAR (42-TEETH)  
13. 129-2181 [1] SEAL-INTEGRAL  
14. 131-2171 [1] CONNECTOR  
15. 131-6679 Y [1] AIR COMPRESSOR GP  
16. 153-7062 [1] BRACKET  
17. 166-6352 [1] TUBE AS  
18. 166-6368 [1] ELBOW AS  
18A. 005-0658 [1] ELBOW-FLARED  
18B. 6V-5063 [1] SEAL-O-RING  
19. 172-4702 [2] CLAMP  
20. 001-7043 [1] ELBOW  
21. 118-4728 [1] ELBOW  
22. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
23. 2S-2053 [1] CLIP (LOOP)  
24. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
25. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 5S-0003 [2] NUT (5/16-18-THD)  
27. 6V-4369 [1] CLIP  
28. 6M-7476 [1] ELBOW  
29. 6V-3251 [2] SEAL-O-RING  
30. 6V-4248 M [3] BOLT (M10X1.5X25-MM)  
31. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
32. 6V-6609 [1] SEAL-O-RING  
33. 6V-7742 M [1] NUT-FULL (M20X2.5-THD)  
34. 8L-6557 [1] CONNECTOR  
35. 8M-2770 [1] CLIP (LOOP)  
36. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
37. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
38. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940013
 

167-0017: BELT TENSIONER GP

167-0017 BELT TENSIONER GP
S/N 3PD1-3936
PART OF 161-1751 ENGINE AR
i01265318 SEBP3294
1670017 BELT TENSIONER GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-5631 [2] SPACER (13X26X89.9-MM THK)  
2. 123-0790 [1] PULLEY (8-GROOVE)  
3. 142-2011 [1] PULLEY GP-IDLER  
3A. 121-7137 [1] SEAL-O-RING  
3B. 144-5611 [1] PULLEY AS-IDLER  
3C. 179-6851 [1] SPACER  
3D. 179-6852 [1] COVER  
3E. 179-6853 M [1] BOLT (M12X1.75X79-MM)  
4. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
4A. 151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
4B. 166-6358 [1] COVER-DUST  
4C. 173-1500 [1] SPACER (10.4X45.1X1.8-MM THK)  
5. 178-4875 [1] PLATE  
6. 178-5252 [1] PULLEY AS-IDLER  
6A. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
6B. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
6C. 121-7137 [1] SEAL-O-RING  
6D. 166-6358 [1] COVER-DUST  
6E. 178-5253 [1] SPACER (IDLER)  
7. 123-0764 M [2] STUD-TAPERLOCK (M12X1.75X138.7-MM)  
8. 190-0649 [1] BELT TENSIONER  
9. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 5R-7137 [2] WASHER-SEALING  
11. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
12. 6V-8004 M [2] BOLT (M12X1.75X120-MM)  
13. 6V-8149 M [2] NUT (M12X1.75-THD)  
14. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
 

#SEBP32940014
 

167-0017: BELT TENSIONER GP

167-0017 BELT TENSIONER GP
S/N 3PD3937-4427
PART OF 161-1751 ENGINE AR
i01906912 SEBP3294
1670017 BELT TENSIONER GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-5631 [2] SPACER (13X26X89.9-MM THK)  
2. 123-0790 [1] PULLEY (8-GROOVE)  
3. 142-2011 Y [1] PULLEY GP-IDLER  
4. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
4A. 151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
4B. 166-6358 [1] COVER-DUST  
4C. 173-1500 [1] SPACER (10.4X45.1X1.8-MM THK)  
5. 178-4875 [1] PLATE  
6. 230-4171 C [1] PULLEY AS-IDLER  
7. 123-0764 M [2] STUD-TAPERLOCK (M12X1.75X138.7-MM)  
8. 190-0649 [1] BELT TENSIONER (BELT)  
9. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 5R-7137 [2] WASHER-SEALING  
11. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
12. 6V-8004 M [2] BOLT (M12X1.75X120-MM)  
13. 6V-8149 M [2] NUT (M12X1.75-THD)  
14. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940015
 

234-2412: BELT TENSIONER GP

234-2412 BELT TENSIONER GP
S/N 3PD4428-UP; ASD601-UP
PART OF 161-1751, 285-6406 ENGINE AR, 159-7195 GENERAL AR
i01931605 SEBP3294
2342412 BELT TENSIONER GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-7137 [2] WASHER-SEALING  
2. 9Y-5631 [2] SPACER (13X26X89.9-MM THK)  
3. 142-2011 [1] PULLEY GP-IDLER  
3A. 121-7137 [1] SEAL-O-RING  
3B. 144-5611 [1] PULLEY AS-IDLER  
3C. 179-6851 [1] SPACER  
3D. 179-6852 [1] COVER  
3E. 179-6853 M [1] BOLT (M12X1.75X79-MM)  
4. 169-4657 [1] BRACKET  
5. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
5A. 151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
5B. 166-6358 [1] COVER-DUST  
5C. 173-1500 [1] SPACER (10.4X45.1X1.8-MM THK)  
6. 178-4875 [1] PLATE  
7. 190-0649 [1] BELT TENSIONER  
8. 230-4171 [1] PULLEY AS-IDLER  
9. 123-0764 M [2] STUD-TAPERLOCK (M12X1.75X138.7-MM)  
10. 3E-4353 [3] WASHER-HARD (11X25X3-MM THK)  
11. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 6V-1820 M [3] BOLT (M10X1.5X30-MM)  
13. 6V-3822 M [2] BOLT (M10X1.5X35-MM)  
14. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
15. 6V-8004 M [2] BOLT (M12X1.75X120-MM)  
16. 6V-8149 M [2] NUT (M12X1.75-THD)  
17. 8T-0643 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
 

#SEBP32940016
 

171-3062: CAMSHAFT GP

171-3062 CAMSHAFT GP
S/N 3PD1-UP
PART OF 161-1751, 285-6406 ENGINE AR
i01266165 SEBP3294
1713062 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5217 M [5] BOLT (M8X1.25X20-MM)  
2. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
3. 178-3643 [1] PIN-THRUST  
4. 133-7068 [1] GASKET-CAMSHAFT COVER  
5. 171-3063 [1] CAMSHAFT AS  
5A. 1B-8705 [1] KEY-WOODRUFF  
5B. 133-7100 [1] GEAR-CAMSHAFT DRIVE (96-TEETH)  
6. 4K-9841 [1] WASHER (0.406X0.75X0.064-IN THK)  
7. 118-0459 [1] COVER  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32940017
 

174-1762: COVER GP-CYLINDER BLOCK

174-1762 COVER GP-CYLINDER BLOCK
S/N 3PD1-UP
PART OF 161-1751, 285-6406 ENGINE AR
i01514839 SEBP3294
1741762 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-4039 [1] CAP  
2. 7C-1445 [3] COVER  
3. 9X-2097 M [2] STUD (M8X1.25-THD)  
4. 184-2524 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  [1] BRACKET  
5. 061-9455 [3] SEAL-O-RING  
6. 107-5769 [1] SEAL-O-RING  
7. 133-9116 [1] COVER  
8. 4P-6587 [1] COVER  
9. 5P-7970 M [1] NUT (M8X1.25-THD)  
10. 5S-9134 [1] SEAL-O-RING  
11. 6V-1250 [1] SEAL-O-RING  
12. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
13. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
14. 6V-5217 M [4] BOLT (M8X1.25X20-MM)  
15. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
16. 7C-9542 [1] COVER-FILTER BASE  
17. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
18. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP32940018
 

132-3210: CRANKSHAFT GP

132-3210 CRANKSHAFT GP
S/N 3PD1-UP
PART OF 161-1751, 285-6406 ENGINE AR
i01219414 SEBP3294
1323210 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 211-0588 J [3] BEARING-MAIN  
  128-0382 AB BEARING-MAIN (0.51-MM US)  
  128-0383 AB BEARING-MAIN (0.76-MM US)  
  128-0384 AB BEARING-MAIN (0.51-MM OS)  
  128-0385 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
2. 246-3144 J [2] PLATE-THRUST  
3. 211-0587 J [4] BEARING-MAIN  
  128-0400 AB BEARING-MAIN (0.51-MM US)  
  128-0401 AB BEARING-MAIN (0.76-MM US)  
  128-0402 AB BEARING-MAIN (0.51-MM OS)  
  128-0403 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
4. 326-4278 [1] CRANKSHAFT AS  
4A. 6V-3536 [1] DOWEL  
4B. 187-8972 [1] GEAR-CRANKSHAFT (48-TEETH)  
4C. 9Y-0821 [1] SLEEVE (FRONT)  
4D. 9Y-0810 [1] SLEEVE-WEAR (REAR)  
   
    AVAILABLE REPAIR KIT(S):
  196-9521 J BEARING GP-MAIN (CRANKSHAFT)  
    (INCLUDES STANDARD MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KITS MARKED J INCLUDES PARTS MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32940019
 

200-2057: CYLINDER BLOCK AS

200-2057 CYLINDER BLOCK AS
S/N 3PD1-UP
PART OF 204-3451 CYLINDER BLOCK AS
i01579185 SEBP3294
2002057 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 216-5583 [5] BUSHING  
2. 216-5585 [1] BUSHING  
3. 216-5584 [1] BUSHING  
4. [1] CYLINDER BLOCK AS  
4A. 117-0166 [7] CAP-BEARING  
4B. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
4C. 175-0454 M [14] BOLT (M16X2X160-MM)  
  M   METRIC PART
 

Information:

Disassembly and Assembly
Air Compressor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Air Compressor Drive Gear - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Air Compressor Drive Gear - Install
3176C and 3196 Engines For Caterpillar Built Machines
Service Magazine
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15

Caterpillar Parts SIS Catalog 160H :

AIR COMPRESSOR GP
131-6679 AIR COMPRESSOR GP
285-6406 ENGINE AR
161-1751 ENGINE AR
ENGINE AR
161-1751 ENGINE AR
236-3949 SNOW AR-MOTOR GRADER
236-3948 SNOW AR-MOTOR GRADER
197-5958 SNOW AR-MOTOR GRADER
197-5572 ROADING AR
AIR COMPRESSOR GP
133-7031 AIR COMPRESSOR GP
AIR COMPRESSOR GP
234-2413 AIR COMPRESSOR GP
BELT TENSIONER GP
167-0017 BELT TENSIONER GP
BELT TENSIONER GP
167-0017 BELT TENSIONER GP
BELT TENSIONER GP
234-2412 BELT TENSIONER GP
CAMSHAFT GP
171-3062 CAMSHAFT GP
COVER GP-CYLINDER BLOCK
174-1762 COVER GP-CYLINDER BLOCK
CRANKSHAFT GP
132-3210 CRANKSHAFT GP

Truck sale:

Caterpillar 160H
 
Caterpillar 160H
- motor graders
WESTERN STATES EQUIPMENT
 
 
Caterpillar 160H, motor graders, Construction


Caterpillar 160H, motorgrader mijnbouw, Bouw
90.000 
Caterpillar 160H, motorgrader mijnbouw, Bouw

WAGNER EQUIPMENT CO
Caterpillar 160H, motorgrader mijnbouw, Bouw
69.912 
Caterpillar 160H, motorgrader mijnbouw, Bouw
- motor graders
MICHIGAN CAT
Caterpillar 160H, motorgrader mijnbouw, Bouw
74.912 
Caterpillar 160H, motorgrader mijnbouw, Bouw
- motor graders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.