AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

207-2409 TANK & MTG GP-HYDRAULIC S/N ASD194-UP PART OF 159-7195 GENERAL AR 160H MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
VALVE & LINKAGE GP

MOTOR GRADER 160H MOTOR GRADER ASD
 160H Motor Grader ASD00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3294 160H ASD   (2001)

HYDRAULIC SYSTEM

TANK GP
TANK & FILTER GP-HYDRAULIC
185-3532 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
177-9439 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
207-2409 TANK & MTG GP-HYDRAULIC
 

#SEBP32940740
 

207-2409: TANK & MTG GP-HYDRAULIC

207-2409 TANK & MTG GP-HYDRAULIC
S/N ASD194-UP
PART OF 159-7195 GENERAL AR
i01658236 SEBP3294
2072409 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP (HYDRAULIC TANK)  
  5P-8500 [1] KEY (PADLOCK, HYDRAULIC TANK)  
2. 207-2410 Y [1] TANK & FILTER GP-HYDRAULIC  
3. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
4. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940741
 

107-3856: VALVE & LINKAGE GP

107-3856 VALVE & LINKAGE GP -5-BANK, RH; 7-BANK, LH
S/N ASD1-UP
PART OF 179-4356 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02267097 SEBP3294
1073856 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
2. 104-8651 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
4A. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (CENTERSHIFT)  
5A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
7. 8W-0456 [3] SHAFT  
8. 8X-4277 [12] ROD AS  
9. 8D-5633 [1] LEVER (SIDESHIFT)  
9A. 8D-5633 [1] LEVER (WHEEL LEAN)  
10. 101-2458 [1] LEVER (WING LIFT)  
10A. 101-2458 [1] LEVER (BLADE TIP)  
10B. 101-2458 [1] LEVER (PLOW, DOZER)  
11. 137-4515 C [2] BUSHING  
12. 8D-5640 [14] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [24] LOCKWASHER  
18. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
19. 8D-5641 [12] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 CM [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
24A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
33. 2G-7108 [1] KNOB-WING TILT  
34. 103-1597 [1] LEVER (WING TILT)  
35. 2G-6740 [1] KNOB-RIPPER  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
40. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 104-7429 [2] PLATE  
44. 137-4516 C [1] SHAFT  
45. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
46. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
47. 2G-7107 [1] KNOB-WING LIFT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940742
 

112-5499: VALVE & LINKAGE GP

112-5499 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N ASD1-UP
PART OF 184-7303 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00123239 SEBP3294
1125499 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [2] LEVER  
3. 8D-5634 [2] LEVER  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
44. 104-8645 Y [1] VALVE GP-BANK 5 (LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940743
 

115-0791: VALVE & LINKAGE GP

115-0791 VALVE & LINKAGE GP -6-BANK, RH, LH
S/N ASD1-UP
AN ATTACHMENT
i00123368 SEBP3294
1150791 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-1008 Y [1] VALVE GP-BANK 6 (RH)  
2. 104-8648 Y [1] VALVE GP-BANK 6 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 8X-4277 [12] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 8D-5640 [14] BEARING  
10. 8D-5636 B [4] SHIM (0.254-MM THK)  
11. 8D-5637 B [4] SHIM (0.762-MM THK)  
12. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
13. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
14. 3F-9556 [24] LOCKWASHER  
15. 8D-5641 [12] BEARING  
16. 2G-6757 [1] KNOB-BLADE LIFT  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
18. 2G-6749 [1] KNOB-SIDESHIFT  
19. 2G-6747 [1] KNOB-BLADE TIP  
20. 8D-5632 [2] LEVER  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
30. 104-7419 [1] PLATE AS (RH)  
31. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 2G-7108 [1] KNOB-WING TILT  
35. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
36. 103-1597 [2] LEVER  
37. 2G-7107 [1] KNOB-WING LIFT  
38. 137-4515 [2] BUSHING  
39. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6V-8188 [2] NUT (1/2-13-THD)  
42. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
43. 8W-0456 [3] SHAFT  
44. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
45. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
46. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
47. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940744
 

115-0805: VALVE & LINKAGE GP

115-0805 VALVE & LINKAGE GP -6-BANK, RH; 7-BANK, LH
S/N ASD1-UP
PART OF 184-7304 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00123370 SEBP3294
1150805 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-1008 Y [1] VALVE GP-BANK 6 (RH)  
2. 104-8651 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 2G-7107 [1] KNOB-WING LIFT  
7. 8X-4277 [13] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
8. 8D-5633 [2] LEVER  
9. 101-2458 [3] LEVER  
10. 137-4515 [2] BUSHING  
11. 8D-5640 [15] BEARING  
12. 8D-5636 B [4] SHIM (0.254-MM THK)  
13. 8D-5637 B [4] SHIM (0.762-MM THK)  
14. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
15. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
16. 3F-9556 [26] LOCKWASHER  
17. 8D-5641 [13] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
32. 104-7419 [1] PLATE AS (RH)  
33. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
34. 104-7429 [2] PLATE  
35. 137-4516 [1] SHAFT  
36. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
42. 2G-6740 [1] KNOB-RIPPER  
43. 103-1597 [2] LEVER  
44. 2G-7108 [1] KNOB-WING TILT  
45. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
46. 8W-0456 [4] SHAFT  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940745
 

121-4084: VALVE & LINKAGE GP

121-4084 VALVE & LINKAGE GP -5-BANK, RH; 7-BANK, LH
S/N ASD1-UP
AN ATTACHMENT
i00123633 SEBP3294
1214084 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [2] LEVER  
5. 8D-5633 [2] LEVER  
6. 8D-5634 [2] LEVER  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [14] BEARING  
10. 8D-5641 [12] BEARING  
11. 8X-4277 [12] ROD AS  
    (EACH INCLUDES)
11A. 146-0705 [1] ROD  
11B. 7H-3641 [1] END-ROD (5/16-24-THD)  
11C. 8L-8598 [1] ROD END  
11D. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [2] LEVER  
15. 101-2458 [3] LEVER  
16. 103-1597 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
20. 137-4515 [2] BUSHING  
21. 137-4517 [1] SHAFT  
22. 130-3120 CY [1] VALVE GP-BANK 7 (LH)  
23. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
24. 2G-6747 [1] KNOB-BLADE TIP  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6749 [1] KNOB-SIDESHIFT  
27. 2G-6751 [1] KNOB-CIRCLE DRIVE  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6753 [1] KNOB-SCARIFIER  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 2G-7107 [1] KNOB-WING LIFT  
35. 2G-7108 [1] KNOB-WING TILT  
36. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
37. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
43. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
44. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
45. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940746
 

121-4086: VALVE & LINKAGE GP

121-4086 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N ASD1-UP
AN ATTACHMENT
i00123635 SEBP3294
1214086 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [2] LEVER  
5. 8D-5633 [2] LEVER  
6. 8D-5634 [2] LEVER  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [12] BEARING  
10. 8D-5641 [10] BEARING  
11. 8W-0456 [1] SHAFT  
12. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
12A. 146-0705 [1] ROD  
12B. 7H-3641 [1] END-ROD (5/16-24-THD)  
12C. 8L-8598 [1] ROD END  
12D. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [2] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 130-3119 CY [1] VALVE GP-BANK 5 (LH)  
23. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
24. 2G-6747 [1] KNOB-BLADE TIP  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6749 [1] KNOB-SIDESHIFT  
27. 2G-6751 [1] KNOB-CIRCLE DRIVE  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6753 [1] KNOB-SCARIFIER  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
35. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940747
 

121-4094: VALVE & LINKAGE GP

121-4094 VALVE & LINKAGE GP -5-BANK, RH; 6-BANK, LH
S/N ASD1-UP
AN ATTACHMENT
i00123638 SEBP3294
1214094 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [22] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [11] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [13] BEARING  
11. 8D-5641 [11] BEARING  
12. 8L-8598 [11] ROD END  
13. 8W-0456 [2] SHAFT  
14. 8X-5499 [2] RETAINER  
15. 9M-1853 [6] MOUNTING  
16. 101-2457 [2] LEVER  
17. 101-2458 [2] LEVER  
18. 103-1597 [1] LEVER  
19. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 104-7429 [2] PLATE  
21. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
22. 137-4515 [2] BUSHING  
23. 137-4516 [1] SHAFT  
24. 146-0705 [11] ROD  
25. 130-3121 CY [1] VALVE GP-BANK 6 (LH)  
26. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT  
36. 2G-7107 [1] KNOB-WING LIFT  
37. 2G-7108 [1] KNOB-WING TILT  
38. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
39. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
41. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
42. 6V-8186 [11] NUT-FULL (5/16-24-THD)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
45. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
47. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
48. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940748
 

121-4095: VALVE & LINKAGE GP

121-4095 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N ASD1-UP
AN ATTACHMENT
i00123640 SEBP3294
1214095 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [9] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5641 [9] BEARING  
12. 8L-8598 [9] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 146-0705 [9] ROD  
23. 130-3116 CY [1] VALVE GP-BANK 4 (RH)  
24. 130-3119 CY [1] VALVE GP-BANK 5 (LH)  
25. 2G-6747 [1] KNOB-BLADE TIP  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6749 [1] KNOB-SIDESHIFT  
28. 2G-6751 [1] KNOB-CIRCLE DRIVE  
29. 2G-6752 [1] KNOB-ARTICULATION  
30. 2G-6753 [1] KNOB-SCARIFIER  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8186 [9] NUT-FULL (5/16-24-THD)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32940749
 

121-4096: VALVE & LINKAGE GP

121-4096 VALVE & LINKAGE GP -5-BANK, RH; 7-BANK, LH
S/N ASD1-UP
PART OF 184-7306 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00123642 SEBP3294
1214096 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [12] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [14] BEARING  
11. 8D-5641 [12] BEARING  
12. 8L-8598 [12] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [3] LEVER  
17. 103-1597 [1] LEVER  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4517 [1] SHAFT  
23. 146-0705 [12] ROD  
24. 130-3122 CY [1] VALVE GP-BANK 7 (LH)  
25. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
26. 2G-6740 [1] KNOB-RIPPER  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT  
36. 2G-7107 [1] KNOB-WING LIFT  
37. 2G-7108 [1] KNOB-WING TILT  
38. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
46. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
47. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
48. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 160H :

TANK & MTG GP-HYDRAULIC
177-9439 TANK & MTG GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
185-3532 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
SWASHPLATE GP
169-3290 SWASHPLATE GP
166-3302 STEERING AR-SECONDARY
SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
VALVE & LINKAGE GP
107-3856 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-5499 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0791 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0805 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4084 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4086 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4094 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4095 VALVE & LINKAGE GP

Truck sale:

Caterpillar 160H
 
Caterpillar 160H
- motor graders
WESTERN STATES EQUIPMENT
 
 
Caterpillar 160H, motor graders, Construction


Caterpillar 160H, motorgrader mijnbouw, Bouw
90.000 
Caterpillar 160H, motorgrader mijnbouw, Bouw

WAGNER EQUIPMENT CO
Caterpillar 160H, motorgrader mijnbouw, Bouw
69.912 
Caterpillar 160H, motorgrader mijnbouw, Bouw
- motor graders
MICHIGAN CAT
Caterpillar 160H, motorgrader mijnbouw, Bouw
74.912 
Caterpillar 160H, motorgrader mijnbouw, Bouw
- motor graders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.