250-1930 WIRING GP-MONITOR S/N APN1-UP PART OF 249-7786 DISPLAY AR-MONITOR AN ATTACHMENT 143H MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 250-1930 WIRING GP-
1. 251-9569 WIRING GP-
2. 249-8901 WIRING GP-
3. 254-1561 WIRING GP-
4. 159-5877 WIRING GP-
5. 159-5877 WIRING GP-
6. 178-0163 WIRING GP-
7. 178-0163 WIRING GP-
8. 178-0163 WIRING GP-
9. 194-3200 WIRING GP-
0. INFORMATION

MOTOR GRADER 143H MOTOR GRADER APN
143H Motor Grader APN00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3297 143H APN (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

252-5709 WIRING GP-GRADE CONTROL

250-1919 WIRING GP-MONITOR

250-1930 WIRING GP-MONITOR

251-9569 WIRING GP-MONITOR

249-8901 WIRING GP-RADIO

254-1561 WIRING GP-RADIO

#SEBP32970370

250-1930: WIRING GP-MONITOR

WIRING GP-MONITOR

250-1930 WIRING GP-MONITOR
S/N APN1-UP
PART OF 249-7786 DISPLAY AR-MONITOR
AN ATTACHMENT

i02825257 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
286-5697 Y	[1]	MOUNTING GP-MONITOR (CD700 DISPLAY)
244-1904 Y	[1]	MOUNTING GP-MONITOR (CB420 DISPLAY)
247-6437 Y	[1]	WIRING GP-CAB

245-7409	[1]	BRACKET AS
151-0802	[1]	KNOB
Y		SEPARATE ILLUSTRATION

#SEBP32970371

251-9569: WIRING GP-MONITOR

WIRING GP-MONITOR

251-9569 WIRING GP-MONITOR
S/N APN1-UP
PART OF 250-1919 WIRING GP-MONITOR
AN ATTACHMENT

i02279671 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	233-3292	[1]	HARNESS AS-REAR CHASSIS
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2272	[2]	PLUG AS-CONNECTOR (4-PIN)
3.	130-5300	[1]	CLIP
4.	156-6175	[1]	CLIP (LADDER)
5.	4P-7581	[1]	CLIP (LADDER)
6.	5P-4115	[3]	WASHER-HARD (7.2X19X2-MM THK)
7.	5P-9299	[2]	CLIP (LOOP)
8.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
10.	9X-2045 M	[3]	SCREW-TRUSS HEAD (M6X1X20-MM)
	M		METRIC PART

#SEBP32970372

249-8901: WIRING GP-RADIO

WIRING GP-RADIO

249-8901 WIRING GP-RADIO
S/N APN1-UP
PART OF 254-1561 WIRING GP-RADIO
AN ATTACHMENT

i02291649 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	243-3247	[1]	HARNESS AS-RADIO
	190-7614		KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	2V-8259	[1]	GROMMET
2.	033-8248	[8]	CLIP (LOOP)
3.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4133 M	[6]	NUT (M10X1.5-THD)
5.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP32970373

254-1561: WIRING GP-RADIO

WIRING GP-RADIO

254-1561 WIRING GP-RADIO
S/N APN1-UP
PART OF 292-7974 DISPLAY AR-MONITOR, 249-7802, 250-3028 GRADE CONTROL AR-SATELLITE
AN ATTACHMENT

i02291644 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	249-8901 Y	[1]	WIRING GP-RADIO
	Y		SEPARATE ILLUSTRATION

#SEBP32970374

159-5877: WIRING GP-REAR

WIRING GP-REAR

159-5877 WIRING GP-REAR -PLATFORM
S/N APN1-518
PART OF 160-8342 GENERAL AR

i01506963 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[1]	STRAP-CABLE
4.	8W-3642	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(90-CM)
	9G-8909	[1]	COVER-TERMINAL (BLACK)
5.	8W-8527	[1]	SLEEVE
6.	8W-8528	[4]	SLEEVE
7.	9L-1566	[1]	SUPPORT
8.	9L-3059	[1]	SUPPORT-TUBE
9.	9M-4594	[2]	SPACER (0.406X0.875X0.75-IN THK)
10.	9U-2277	[1]	CLIP AS
11.	061-7661	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(42-CM)
12.	106-8704	[1]	SUPPRESSOR AS-ARC
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
14.	123-3689	[1]	PLATE AS
15.	123-3692	[1]	ARM
16.	123-3695	[1]	PLATE
17.	139-2116	[1]	SWITCH GP-TOGGLE (GROUND LEVEL ENGINE SHUTDOWN)
18.	139-6122	[1]	BOSS
19.	169-3292	[1]	HARNESS AS-TRANSMISSION
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
20.	169-3502	[1]	HARNESS AS-REAR CHASSIS
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
21.	169-5414	[1]	CLIP
22.	179-2187	[1]	HARNESS AS-REAR CHASSIS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	127-5483	[5]	PLUG AS-CONNECTOR (1-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
23.	187-1008	[1]	SENDER AS-POSITION (ARTICULATION)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	9X-1813 E		SLEEVE (15-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
24.	033-8248	[1]	CLIP (LOOP)
25.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
26.	115-3073	[1]	CLIP AS-CONNECTING
27.	130-5300	[5]	CLIP
28.	130-5301	[1]	CLIP
29.	139-6857	[1]	PLATE
30.	174-5907	[4]	CLIP (LOOP)
31.	1S-0994	[1]	CLIP (LOOP)
32.	1S-0996	[2]	CLIP
33.	3E-5169	[1]	GUARD-SWITCH
34.	4D-1432	[2]	SPACER (12.52X17.14X45.72-MM THK)
35.	4D-7388	[1]	CLIP (LOOP)
36.	4D-7794	[4]	CLIP
37.	4K-8864	[1]	CLIP (LOOP)
38.	4S-4455	[3]	CLIP
39.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
40.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
41.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
42.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
43.	6D-4244	[3]	CLIP (LOOP)
44.	6D-4246	[3]	CLIP (LOOP)
45.	6V-6893	[3]	BOLT (6-32X0.375-IN)
46.	6V-8801	[1]	NUT (3/8-16-THD)
47.	7C-4354	[6]	CLIP
48.	7X-2537 M	[1]	BOLT (M8X1.25X35-MM)
49.	8D-9671	[1]	CLIP
50.	8M-2773	[3]	CLIP (LOOP)
51.	8T-4121	[28]	WASHER-HARD (11X21X2.5-MM THK)
52.	8T-4133 M	[4]	NUT (M10X1.5-THD)
53.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
54.	8T-4137 M	[16]	BOLT (M10X1.5X20-MM)
55.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
56.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
57.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
58.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
59.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
60.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
61.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
62.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
63.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
64.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
65.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
66.	8T-6870 M	[2]	BOLT (M8X1.25X70-MM)
67.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
68.	8W-8909	[3]	SLEEVE
69.	8X-5489	[1]	SLEEVE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32970375

159-5877: WIRING GP-REAR

WIRING GP-REAR

159-5877 WIRING GP-REAR -PLATFORM
S/N APN519-UP
PART OF 160-8342 GENERAL AR

i02291620 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[1]	STRAP-CABLE
4.	8W-3642	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(90-CM)
	9G-8909	[1]	COVER-TERMINAL (BLACK)
5.	8W-8527	[1]	SLEEVE
6.	8W-8528	[4]	SLEEVE
7.	9L-1566	[1]	SUPPORT
8.	9L-3059	[1]	SUPPORT-TUBE
9.	9M-4594	[2]	SPACER (0.406X0.875X0.75-IN THK)
10.	9U-2277	[1]	CLIP AS
11.	061-7661	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(42-CM)
12.	106-8704	[1]	SUPPRESSOR AS-ARC
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
14.	123-3689	[1]	PLATE AS
15.	123-3692	[1]	ARM
16.	123-3695	[1]	PLATE
17.	139-2116	[1]	SWITCH GP-TOGGLE (GROUND LEVEL ENGINE SHUTDOWN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
18.	139-6122	[1]	BOSS
19.	254-9243 C	[1]	HARNESS AS-TRANSMISSION
	126-1774	[1]	COVER-CONNECTOR
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
20.	169-3502	[1]	HARNESS AS-REAR CHASSIS
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
21.	169-5414	[1]	CLIP
22.	179-2187	[1]	HARNESS AS-REAR CHASSIS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	127-5483	[5]	PLUG AS-CONNECTOR (1-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
23.	187-1008	[1]	SENDER AS-POSITION (ARTICULATION)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	9X-1813 E		SLEEVE (15-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
24.	033-8248	[1]	CLIP (LOOP)
25.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
26.	115-3073	[1]	CLIP AS-CONNECTING
27.	130-5300	[5]	CLIP
28.	130-5301	[1]	CLIP
29.	139-6857	[1]	PLATE
30.	174-5907	[4]	CLIP (LOOP)
31.	1S-0994	[1]	CLIP (LOOP)
32.	1S-0996	[2]	CLIP
33.	3E-5169	[1]	GUARD-SWITCH
34.	4D-1432	[2]	SPACER (12.52X17.14X45.72-MM THK)
35.	4D-7388	[1]	CLIP (LOOP)
36.	4D-7794	[4]	CLIP
37.	4K-8864	[1]	CLIP (LOOP)
38.	4S-4455	[3]	CLIP
39.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
40.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
41.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
42.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
43.	6D-4244	[3]	CLIP (LOOP)
44.	6D-4246	[3]	CLIP (LOOP)
45.	6V-6893	[3]	BOLT (6-32X0.375-IN)
46.	6V-8801	[1]	NUT (3/8-16-THD)
47.	7C-4354	[6]	CLIP
48.	7X-2537 M	[1]	BOLT (M8X1.25X35-MM)
49.	8D-9671	[1]	CLIP
50.	8M-2773	[3]	CLIP (LOOP)
51.	8T-4121	[28]	WASHER-HARD (11X21X2.5-MM THK)
52.	8T-4133 M	[4]	NUT (M10X1.5-THD)
53.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
54.	8T-4137 M	[16]	BOLT (M10X1.5X20-MM)
55.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
56.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
57.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
58.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
59.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
60.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
61.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
62.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
63.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
64.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
65.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
66.	8T-6870 M	[2]	BOLT (M8X1.25X70-MM)
67.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
68.	8W-8909	[3]	SLEEVE
69.	8X-5489	[1]	SLEEVE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32970376

178-0163: WIRING GP-REAR

WIRING GP-REAR

178-0163 WIRING GP-REAR
S/N APN1-UP
PART OF 171-6700, 185-3144 SERVICE CENTER AR
ALSO AN ATTACHMENT

i01517027 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-0273	[1]	FITTING (RUBBER)
2.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
3.	3S-2093	[2]	STRAP-CABLE
4.	6V-4283	[1]	PLATE-IDENTIFICATION (ALTERNATOR RESET)
5.	7K-4743	[2]	SPACER (10.31X25.4X6.35-MM THK)
6.	7V-9275	[1]	STRAP
7.	9L-1566	[1]	SUPPORT
8.	112-4428	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747		CABLE (00-GA, BLACK)(27CM)
9.	115-5593	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 BE		CABLE (00-GA, BLACK)(119-CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	3S-6050	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
10.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
11.	125-6390	[1]	PLATE-INFORMATION (ENGINE)
12.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
13.	169-5414	[1]	CLIP
14.	169-7262	[1]	HARNESS AS-REAR (SERVICE CENTER, RH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
			(EACH INCLUDES RCEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
15.	169-7263	[1]	HARNESS AS-REAR (SERVICE CENTER, LH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPATCLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
16.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
16A.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)
			(EACH INCLUDES)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	6V-8187	[2]	NUT (1/4-28-THD)
	1H-3244	[2]	LOCKWASHER
17.	177-8802	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 BE		CABLE (00-GA, RED)(117-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
18.	177-9813	[1]	CABLE AS
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
19.	177-9814	[1]	CABLE AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	8N-1548	[1]	PIN-CONNECTOR (4-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
20.	178-0160	[1]	WIRE AS
21.	178-0162	[1]	CABLE AS
	5P-5689 BD		WIRE (8-GA, BLACK)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
22.	178-0555	[1]	CABLE AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
23.	189-0108	[1]	PLATE
24.	194-1854	[1]	COVER
25.	195-4990	[1]	WIRE AS
26.	174-3897	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 BE		CABLE (00-GA, RED)
	8N-0869	[2]	COVER-TERMINAL (RED)
27.	033-8248	[1]	CLIP (LOOP)
28.	130-5300	[3]	CLIP
29.	132-6938	[1]	PLATE
30.	157-2528	[1]	SPACER (7X16X20-MM THK)
31.	174-5907	[6]	CLIP (LOOP)
32.	1S-0994	[2]	CLIP (LOOP)
33.	1S-1015	[1]	CLIP
34.	1V-6688	[1]	GROMMET
35.	3K-8106	[2]	SCREW-MACHINE (8-32X1-IN)
36.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
37.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
38.	4D-7794	[3]	CLIP
39.	4D-8948	[1]	CLIP
40.	4H-2558	[2]	GROMMET
41.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
42.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
43.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
44.	6D-3479	[1]	CLIP (LOOP)
45.	6K-8178	[2]	CLIP (LOOP)
46.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE SHUTDOWN)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
47.	6V-7357 M	[1]	BOLT (M6X1X25-MM)
48.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)(BATTERY)
49.	7N-3718	[1]	CLIP
50.	7Y-8169	[1]	GROMMET
51.	8C-8451 M	[1]	BOLT (M6X1X40-MM)
52.	8M-2772	[1]	CLIP (LOOP)
53.	8T-0293 M	[1]	BOLT (M12X1.75X20-MM)
54.	8T-4121	[17]	WASHER-HARD (11X21X2.5-MM THK)
55.	8T-4133 M	[1]	NUT (M10X1.5-THD)
56.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
57.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
58.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
59.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
60.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
61.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
62.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
63.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
64.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32970377

178-0163: WIRING GP-REAR

WIRING GP-REAR

178-0163 WIRING GP-REAR
S/N APN1-774
PART OF 171-6700, 185-3144 SERVICE CENTER AR
ALSO AN ATTACHMENT

i02712603 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-0273	[1]	FITTING (RUBBER)
2.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
3.	3S-2093	[2]	STRAP-CABLE
4.	6V-4283	[1]	PLATE-IDENTIFICATION (ALTERNATOR RESET)
5.	249-4364 C	[2]	SPACER
6.	7V-9275	[1]	STRAP
7.	9L-1566	[1]	SUPPORT
8.	112-4428	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 BE		CABLE (00-GA, BLACK)(27-CM)
9.	115-5593	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 BE		CABLE (00-GA, BLACK)(119-CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	3S-6050	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
10.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
11.	125-6390	[1]	PLATE-INFORMATION (ENGINE)
12.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
13.	169-5414	[1]	CLIP
14.	169-7262	[1]	HARNESS AS-REAR (SERVICE CENTER, RH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	114-8843 BE		SLEEVE-PLASTIC
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
15.	169-7263	[1]	HARNESS AS-REAR (SERVICE CENTER, LH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	101-8106	[1]	LOCK-CONNECTOR
	101-8108	[1]	PLUG-CONNECTOR
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
16.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
16A.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)
			(EACH CIRCUIT BREAKER AS INCLUDES)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	6V-8187	[2]	NUT (1/4-28-THD)
	253-2111	[2]	LOCKWASHER
17.	177-8802	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 BE		CABLE (00-GA, RED)(32-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
18.	177-9813	[1]	CABLE AS
	5P-5675 BD		WIRE (6-GA, BLACK)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	114-8843 BE		SLEEVE-PLASTIC
19.	177-9814	[1]	CABLE AS
	114-8843 BE		SLEEVE-PLASTIC
	6V-2369 BD		CABLE (4-GA, BLACK)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	7T-4369	[1]	PIN-CONNECTOR
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
20.	178-0160	[1]	WIRE AS
21.	178-0162	[1]	CABLE AS
	5P-5689 BD		WIRE (8-GA, BLACK)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
22.	178-0555	[1]	CABLE AS
	6V-2369 BD		CABLE (4-GA, BLACK)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
23.	189-0108	[1]	PLATE
24.	194-1854	[1]	COVER
25.	195-4990	[1]	WIRE AS
26.	174-3897	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 BE		CABLE (00-GA, RED)(117-CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
27.	033-8248	[1]	CLIP (LOOP)
28.	130-5300	[3]	CLIP
30.	157-2528	[1]	SPACER (7X16X20-MM THK)
31.	174-5907	[6]	CLIP (LOOP)
32.	1S-0994	[2]	CLIP (LOOP)
33.	1S-1015	[1]	CLIP
34.	1V-6688	[1]	GROMMET
35.	3K-8106	[2]	SCREW-MACHINE (8-32X1-IN)
36.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
37.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
38.	4D-7794	[3]	CLIP
39.	4D-8948	[1]	CLIP
40.	4H-2558	[2]	GROMMET
41.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
42.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
43.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
44.	6D-3479	[1]	CLIP (LOOP)
45.	6K-8178 C	[1]	CLIP (LOOP)
46.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
47.	6V-7357 M	[1]	BOLT (M6X1X25-MM)
48.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)(BATTERY)
49.	7N-3718	[1]	CLIP
50.	7Y-8169	[1]	GROMMET
51.	8C-8451 M	[1]	BOLT (M6X1X40-MM)
52.	8M-2772	[1]	CLIP (LOOP)
53.	8T-0293 M	[1]	BOLT (M12X1.75X20-MM)
54.	8T-4121	[17]	WASHER-HARD (11X21X2.5-MM THK)
55.	8T-4133 M	[1]	NUT (M10X1.5-THD)
56.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
57.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
58.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
59.	8T-4189 CM	[1]	BOLT (M8X1.25X20-MM)
60.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
61.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
62.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
63.	8T-4224 C	[1]	WASHER-HARD (8.8X16X2-MM THK)
64.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
65.	5P-4295 C	[1]	CLIP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32970378

178-0163: WIRING GP-REAR

WIRING GP-REAR

178-0163 WIRING GP-REAR
S/N APN775-UP
PART OF 171-6700, 185-3144 SERVICE CENTER AR
ALSO AN ATTACHMENT

i02712612 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-0273	[1]	FITTING (RUBBER)
2.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
3.	3S-2093	[2]	STRAP-CABLE
4.	6V-4283	[1]	PLATE-IDENTIFICATION (ALTERNATOR RESET)
5.	7V-9275	[1]	STRAP
6.	112-4428	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 BE		CABLE (00-GA, BLACK)(27-CM)
7.	115-5593	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 BE		CABLE (00-GA, BLACK)(119-CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	3S-6050	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
8.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
9.	125-6390	[1]	PLATE-INFORMATION (ENGINE)
10.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
11.	169-5414	[1]	CLIP
12.	169-7262	[1]	HARNESS AS-REAR (SERVICE CENTER, RH)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	114-8843 BE		SLEEVE-PLASTIC
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
13.	169-7263	[1]	HARNESS AS-REAR (SERVICE CENTER, LH)
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	101-8106	[1]	LOCK-CONNECTOR
	101-8108	[1]	PLUG-CONNECTOR
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
14.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
14A.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)
			(EACH CIRCUIT BREAKER AS INCLUDES)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	6V-8187	[2]	NUT (1/4-28-THD)
	253-2111	[2]	LOCKWASHER
15.	174-3897	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 BE		CABLE (00-GA, RED)(117-CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
16.	177-8802	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 BE		CABLE (00-GA, RED)(32-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
17.	177-9813	[1]	CABLE AS
	5P-5675 BD		WIRE (6-GA, BLACK)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	114-8843 BE		SLEEVE-PLASTIC
18.	177-9814	[1]	CABLE AS
	8N-1548	[1]	PIN-CONNECTOR (4-GA)
	114-8843 BE		SLEEVE-PLASTIC
	6V-2369 BD		CABLE (4-GA, BLACK)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	7T-4369	[1]	PIN-CONNECTOR
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
19.	178-0160	[1]	WIRE AS
20.	178-0162	[1]	CABLE AS
	5P-5689 BD		WIRE (8-GA, BLACK)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
21.	178-0555	[1]	CABLE AS
	6V-2369 BD		CABLE (4-GA, BLACK)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
22.	189-0108	[1]	PLATE
23.	194-1854	[1]	COVER
24.	195-4990	[1]	WIRE AS
25.	249-4364	[2]	SPACER
26.	033-8248	[1]	CLIP (LOOP)
27.	130-5300	[3]	CLIP
28.	157-2528	[1]	SPACER (7X16X20-MM THK)
29.	174-5907	[6]	CLIP (LOOP)
30.	1S-0994	[2]	CLIP (LOOP)
31.	1S-1015	[1]	CLIP
32.	1V-6688	[1]	GROMMET
33.	3K-8106	[2]	SCREW-MACHINE (8-32X1-IN)
34.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
35.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
36.	4D-7794	[4]	CLIP
37.	4D-8948	[1]	CLIP
38.	4H-2558	[2]	GROMMET
39.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
40.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
41.	5P-4295	[1]	CLIP
42.	6D-3479	[1]	CLIP (LOOP)
43.	6K-8178	[1]	CLIP (LOOP)
44.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
45.	6V-7357 M	[1]	BOLT (M6X1X25-MM)
46.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)(BATTERY)
47.	7N-3718	[1]	CLIP
48.	7Y-8169	[1]	GROMMET
49.	8C-8451 M	[1]	BOLT (M6X1X40-MM)
50.	8M-2772	[1]	CLIP (LOOP)
51.	8T-0293 M	[1]	BOLT (M12X1.75X20-MM)
52.	8T-4121 C	[15]	WASHER-HARD (11X21X2.5-MM THK)
53.	8T-4136 CM	[9]	BOLT (M10X1.5X25-MM)
54.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
55.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
56.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
57.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
58.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
59.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
60.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32970379

194-3200: WIRING GP-REAR

WIRING GP-REAR

194-3200 WIRING GP-REAR
S/N APN1-518
PART OF 211-1767, 211-1768 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i01506918 SEBP3297

For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-7842	[1]	RESISTOR AS
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	5P-5677 BD		WIRE (18-GA, BLACK)
	6T-3610	[1]	RESISTOR
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	3S-2093	[9]	STRAP-CABLE
3.	134-3355	[1]	STRAP AS
4.	7K-1181	[1]	STRAP-CABLE
5.	8W-3642	[1]	CABLE AS
	5P-0747 E		CABLE (00-GA, BLACK)(90-CM)
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	9G-8909	[1]	COVER-TERMINAL (BLACK)
6.	8W-8527	[1]	SLEEVE
7.	8W-8528	[4]	SLEEVE
8.	9L-1566	[1]	SUPPORT
9.	9L-3059	[1]	SUPPORT-TUBE
10.	9M-4594	[2]	SPACER (0.406X0.875X0.75-IN THK)
11.	9U-2277	[1]	CLIP AS
12.	061-7661	[1]	CABLE AS
	5P-0747 E		CABLE (00-GA, BLACK)(42-CM)
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
13.	106-8704	[1]	SUPPRESSOR AS-ARC
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	118-7809	[1]	PLATE
15.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
16.	123-3689	[1]	PLATE AS
17.	123-3692	[1]	ARM
18.	123-3695	[1]	PLATE
19.	139-2116	[1]	SWITCH GP-TOGGLE (ENGINE SHUTDOWN)
20.	139-6122	[1]	BOSS
21.	169-3292	[1]	HARNESS AS-TRANSMISSION
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
22.	169-5414	[1]	CLIP
23.	178-0101	[1]	CABLE AS (RED)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	5P-0761 E		CABLE (00-GA, RED)(87-CM)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	8N-0869	[1]	COVER-TERMINAL (RED)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
24.	178-0102	[1]	CABLE AS (RED)
	5P-0761 E		CABLE (00-GA, RED)(148-CM)
	1S-7252	[2]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	9X-6932	[2]	BOOT-TERMINAL
25.	179-2187	[1]	HARNESS AS-REAR CHASSIS
	127-5483	[5]	PLUG AS-CONNECTOR (1-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
26.	187-1008	[1]	SENDER AS-POSITION (ARTICULATION)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	9X-1813 BE		SLEEVE (15-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
27.	195-0434	[1]	BRACKET
28.	196-2970	[1]	HARNESS AS-REAR LIGHTING
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
29.	197-1459	[1]	PLATE
30.	033-8248	[1]	CLIP (LOOP)
31.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
32.	115-3073	[1]	CLIP AS-CONNECTING
33.	130-5300	[5]	CLIP
34.	130-5301	[1]	CLIP
35.	174-5907	[7]	CLIP (LOOP)
36.	1S-0994	[1]	CLIP (LOOP)
37.	1S-0996	[2]	CLIP
38.	3E-0154 Y	[1]	SWITCH GP-MAGNETIC (SECONDARY STEERING RELAY)
39.	3E-5169	[1]	GUARD-SWITCH
40.	4D-1432	[2]	SPACER (12.52X17.14X45.72-MM THK)
41.	4D-7388	[2]	CLIP (LOOP)
42.	4D-7794	[4]	CLIP
43.	4K-8864	[1]	CLIP (LOOP)
44.	4S-4455	[3]	CLIP
45.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
46.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
47.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
48.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
49.	6D-4244	[3]	CLIP (LOOP)
50.	6D-4246	[3]	CLIP (LOOP)
51.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
52.	6V-6893	[3]	BOLT (6-32X0.375-IN)
53.	6V-8801	[1]	NUT (3/8-16-THD)
54.	7C-4354	[6]	CLIP
55.	7X-2537 M	[1]	BOLT (M8X1.25X35-MM)
56.	7X-7729	[1]	WASHER (11X25X3-MM THK)
57.	8D-9671	[1]	CLIP
58.	8M-2773	[3]	CLIP (LOOP)
59.	8T-4121	[34]	WASHER-HARD (11X21X2.5-MM THK)
60.	8T-4133 M	[6]	NUT (M10X1.5-THD)
61.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
62.	8T-4137 M	[21]	BOLT (M10X1.5X20-MM)
63.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
64.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
65.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
66.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
67.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
68.	8T-4205	[6]	WASHER-HARD (7.2X14.5X2-MM THK)
69.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
70.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
71.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
72.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
73.	8T-6870 M	[2]	BOLT (M8X1.25X70-MM)
74.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
75.	8W-8909	[3]	SLEEVE
76.	8X-5489	[1]	SLEEVE
77.	139-6857	[1]	PLATE
78.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines

CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines

CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21