POWER TRAIN
CONTROL GP-TRANSMISSION HYDCOUPLING GP
PUMP GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
DRIVE GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP32970410
179-6064: CONTROL GP-TRANSMISSION HYD
179-6064 CONTROL GP-TRANSMISSION HYD
S/N BSD1-99999; HSN1-1066
PART OF 160-2197 TRANSMISSION AR
S/N BSD1-99999; HSN1-1066
PART OF 160-2197 TRANSMISSION AR
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 179-6063 Y | [1] | VALVE GP-TRANSMISSION CONTROL (DIRECTION, SPEED, RANGE) | |
| 2. | 6V-3918 M | [5] | BOLT (M8X1.25X50-MM) | |
| 3. | 9P-9150 | [66] | WASHER (8.25X18X0.84-MM THK) | |
| 4. | 1T-0738 | [31] | WASHER (8.4X19X1.83-MM THK) | |
| 5. | 8C-4984 M | [14] | BOLT (M8X1.25X150-MM) | |
| 6. | 3E-8005 M | [14] | BOLT (M8X1.25X160-MM) | |
| 7. | 4S-5879 | [1] | SEAL-O-RING | |
| 8. | 213-9842 | [1] | HARNESS AS-TRANSMISSION | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 9. | 8T-0639 M | [2] | BOLT (M6X1X12-MM) | |
| 10. | 6V-5217 M | [3] | BOLT (M8X1.25X20-MM) | |
| 11. | 198-7657 | [1] | BLOCK | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32970411
281-3165: CONTROL GP-TRANSMISSION HYD
281-3165 CONTROL GP-TRANSMISSION HYD
S/N HSN1067-UP
PART OF 160-2197 TRANSMISSION AR
S/N HSN1067-UP
PART OF 160-2197 TRANSMISSION AR
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 281-3163 Y | [1] | VALVE GP-TRANSMISSION CONTROL | |
| 2. | 6V-3918 M | [5] | BOLT (M8X1.25X50-MM) | |
| 3. | 9P-9150 | [66] | WASHER (8.25X18X0.84-MM THK) | |
| 4. | 1T-0738 | [31] | WASHER (8.4X19X1.83-MM THK) | |
| 5. | 8C-4984 M | [14] | BOLT (M8X1.25X150-MM) | |
| 6. | 3E-8005 M | [14] | BOLT (M8X1.25X160-MM) | |
| 7. | 4S-5879 | [1] | SEAL-O-RING | |
| 8. | 180-9324 | [1] | WIRING GP-TRANSMISSION | |
| 3S-2093 | [7] | STRAP-CABLE | ||
| 8T-0639 M | [1] | BOLT (M6X1X12-MM) | ||
| 205-8839 | [1] | CLIP AS | ||
| 205-8847 | [1] | PLATE AS | ||
| 207-6034 | [1] | PLATE AS | ||
| 213-9842 | [1] | HARNESS AS-TRANSMISSION | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8729 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 8T-0639 M | [2] | BOLT (M6X1X12-MM) | |
| 10. | 6V-5217 M | [3] | BOLT (M8X1.25X20-MM) | |
| 11. | 347-0066 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32970412
8E-3366: COUPLING GP-TORSIONAL
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS#SEBP32970413
115-1492: COVER GP-PUMP
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-1450 | [1] | COVER | |
| 2. | 9T-4619 | [1] | SPRING-GUIDE | |
| 3. | 115-1420 | [1] | SPRING | |
| 4. | 6E-0944 | [1] | BRACKET | |
| 5. | 9T-4638 | [2] | CAM | |
| 6. | 8C-3134 | [2] | PIN-SPRING | |
| 7. | 9T-4614 | [1] | RETAINER | |
| 8. | 9T-4817 M | [2] | NUT (M8X1-THD) | |
| 9. | 9T-4883 | [2] | PIN-ROLL | |
| 10. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
| 11. | 9T-4580 | [1] | RETAINER | |
| 12. | 8C-3135 | [1] | PIN-SPRING | |
| 13. | 2M-9780 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP32970414
241-9758: COVER GP-PUMP
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 241-9759 | [1] | COVER | |
| 2. | 9T-4619 | [1] | SPRING-GUIDE | |
| 3. | 115-1420 | [1] | SPRING | |
| 4. | 6E-0944 | [1] | BRACKET | |
| 5. | 9T-4638 | [2] | CAM | |
| 6. | 8C-3134 | [2] | PIN-SPRING | |
| 7. | 9T-4614 | [1] | RETAINER | |
| 8. | 9T-4817 M | [2] | NUT (M8X1-THD) | |
| 9. | 9T-4883 | [2] | PIN-ROLL | |
| 10. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
| 11. | 9T-4580 | [1] | RETAINER | |
| 12. | 8C-3135 | [1] | PIN-SPRING | |
| 13. | 2M-9780 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP32970415
8W-5430: DIFFERENTIAL & BEVEL GEAR GP
8W-5430 DIFFERENTIAL & BEVEL GEAR GP
S/N APN1-UP
PART OF 160-8342 GENERAL AR
S/N APN1-UP
PART OF 160-8342 GENERAL AR
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-9844 | [1] | BOLT-LOCKING (3/8-16X2-IN) | |
| 2. | 5P-8247 | [8] | WASHER-HARD (17X32X3.5-MM THK) | |
| 3. | 034-3557 | [5] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 4. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 2K-5109 | [1] | GASKET | |
| 6. | 8W-5279 | [1] | RETAINER | |
| 7. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 8. | 8T-8883 | [1] | SEAL-O-RING | |
| 9. | 5P-5813 | [1] | LOCKNUT-BEARING (2.75X18-THD) | |
| 10. | 9B-0143 C | [1] | LOCKWASHER | |
| 11. | 7D-8347 | [1] | WASHER-TAB | |
| 12. | 8X-2534 | [1] | HOUSING | |
| 13. | 5L-2031 | [1] | CUP-BEARING | |
| 14. | 5L-2030 | [1] | CONE-BEARING | |
| 15. | 9X-8880 | [8] | BOLT (5/8-11X2-IN) | |
| 16. | 2K-5106 B | [1] | SHIM (2.54-MM THK) | |
| 17. | 340-4515 | [12] | NUT (5/8-11-THD) | |
| 18. | 4H-6520 | [1] | SEAL-O-RING | |
| 19. | 1J-4757 | [1] | CONE-BEARING | |
| 20. | 1J-2860 | [1] | CUP-BEARING | |
| 21. | 8D-8197 | [1] | CAGE | |
| 22. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 23. | 126-2729 | [1] | CONE-SPECIAL TAPERED | |
| 24. | 5P-2503 | [1] | CUP-BEARING | |
| 25. | 6F-0698 | [1] | DOWEL | |
| 26. | 8D-9784 | [2] | LOCK | |
| 27. | 030-8535 | [2] | BOLT-LOCKING (3/8-16X0.875-IN) | |
| 28. | 154-2687 C | [1] | CARRIER AS | |
| 28A. | 0S-1756 | [4] | BOLT (3/4-10X4.25-IN) | |
| 28B. | 5P-8248 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 29. | 340-4517 | [12] | WASHER-HARD (17X32X3.5-MM THK) | |
| 31. | 4D-5292 | [1] | RING-RETAINING | |
| 32. | 1P-2662 | [1] | CONE-BEARING | |
| 33. | 1P-2636 | [1] | CUP-BEARING | |
| 34. | 6G-4701 | [1] | NUT-BEARING (4-1/4-12-THD) | |
| 35. | 8X-2308 | [1] | CAGE AS | |
| 2D-6642 | [1] | BALL | ||
| 36. | 2H-5001 | [1] | SEAL-O-RING | |
| 37. | 8W-5111 | [1] | SLEEVE | |
| 38. | 169-1548 | [1] | SHAFT-PINION | |
| 40. | 9G-2991 | [2] | RING-SEAL | |
| 42. | 154-2688 CY | [1] | DIFFERENTIAL GP | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32970416
154-2688: DIFFERENTIAL GP
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-9628 | [1] | PISTON | |
| 2. | 7D-8225 | [1] | SEAL-RING | |
| 3. | 7D-8226 | [1] | SEAL-RING | |
| 4. | 6Y-7954 | [7] | DISC-FRICTION | |
| 5. | 169-1549 | [1] | GEAR-BEVEL (54-TEETH) | |
| 6. | 8X-2528 | [1] | HOUSING AS | |
| 6A. | 2D-6642 | [1] | BALL | |
| 6B. | 3D-6509 | [2] | DOWEL | |
| 7. | 8X-4641 | [4] | SPACER-THRUST | |
| 8. | 155-2283 | [4] | PINION AS | |
| (EACH INCLUDES) | ||||
| 8A. | 174-6819 | [1] | BUSHING | |
| 9. | 154-2692 | [1] | HOUSING AS | |
| 9A. | 3D-6509 | [2] | DOWEL | |
| 0S-1573 | [12] | BOLT (1/2-13X4-IN) | ||
| 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 10. | 8D-4064 | [2] | WASHER-THRUST | |
| 11. | 109-4582 | [1] | GEAR-BEVEL (24-TEETH) | |
| 12. | 109-4583 | [1] | GEAR-BEVEL (24-TEETH) | |
| 13. | 8D-4282 | [1] | DISC | |
| 14. | 7D-8185 | [8] | DISC | |
| 15. | 2B-0947 | [12] | BOLT (1/2-13X2.25-IN) | |
| 16. | 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 5P-8247 | [24] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 5B-0841 | [24] | BOLT (5/8-18X1.75-IN) | |
| 19. | 310-6159 | [1] | SPIDER | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP32970417
8W-4368: DRIVE GP-FINAL
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 191-5973 | [2] | SHAFT-SUN GEAR (18-TEETH) | |
| 2. | 329-0411 | [2] | SEAL-LIP TYPE | |
| 3. | 8D-3591 | [2] | CARRIER-PLANETARY (57-TEETH) | |
| 4. | 030-8535 | [18] | BOLT-LOCKING (3/8-16X0.875-IN) | |
| 5. | 5M-2894 | [30] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 7D-7889 | [2] | GEAR-RING | |
| 7. | 7D-0035 | [8] | PLATE | |
| 8. | 7S-4571 | [2] | SEAL-O-RING | |
| 9. | 299-3427 | [38] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 10. | 299-3405 | [38] | NUT (3/4-10-THD) | |
| 11. | 9F-2247 | [2] | PLUG-PIPE | |
| 12. | 0S-1589 | [36] | BOLT (5/8-11X1.75-IN) | |
| 13. | 4D-3704 | [32] | WASHER-HARD (17X30X5-MM THK) | |
| 14. | 8D-3743 | [4] | SPROCKET (20-TEETH) | |
| 15. | 236-7724 | [2] | RETAINER | |
| 17. | 4D-6695 | [2] | SEAL-O-RING | |
| 18. | 6G-3212 B | [2] | SHIM PACK (INCLUDES 10-SHIMS) | |
| 19. | 1P-4693 | [4] | CUP-BEARING | |
| 20. | 5P-3490 | [2] | CONE-BEARING | |
| 21. | 8W-4142 | [2] | SHAFT-DRIVE | |
| 22. | 5D-0353 | [12] | BOLT-LOCKING (3/8-16X1-IN) | |
| 23. | 265-9125 | [6] | RETAINER | |
| 24. | 8S-9092 | [32] | BOLT (5/8-11X2.25-IN) | |
| 25. | 200-7929 | [2] | HOUSING | |
| 26. | 218-4406 | [4] | RING-WEAR | |
| 27. | 1P-4694 | [2] | CONE-BEARING | |
| 28. | 547-6515 | [2] | WASHER-THRUST (261.8X309X7-MM THK) | |
| 29. | 5T-7129 | [2] | HOUSING | |
| 30. | 8D-3902 | [2] | SEAL-LIP TYPE | |
| 31. | 8W-2308 | [6] | SHAFT-PLANETARY | |
| 32. | 8D-3540 | [2] | NUT (3-1/4X12-THD) | |
| 34. | 8W-4141 | [2] | LOCK | |
| 35. | 1S-9110 | [12] | ROLLER AS | |
| 36. | 8X-8377 | [12] | WASHER (47.57X82.55X2.92-MM THK) | |
| 37. | 8D-3886 | [2] | RING-RETAINING | |
| 38. | 129-2381 | [6] | GEAR-PLANETARY (26-TEETH) | |
| 39. | 8D-3885 | [2] | WASHER (50.8X107.95X6.35-MM THK) | |
| 40. | 198-4768 | [36] | WASHER-HARD (17.5X32X8-MM THK) | |
| 41. | 328-9669 | [2] | WASHER-THRUST (261.8X303X7-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP32970418
104-1803: DRIVE GP-WHEEL
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 147-7820 | [1] | SPINDLE | |
| 2. | 101-0477 | [1] | WHEEL | |
| 3. | 166-8647 CY | [1] | MOTOR GP-PISTON (LH) | |
| 4. | 145-8032 | [1] | SEAL GP-DUO-CONE | |
| 5P-1608 | [2] | RING-SEALING | ||
| 5. | 5P-3236 | [1] | CONE-BEARING | |
| 6. | 4F-2041 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 7. | 8S-9075 | [1] | CONE-BEARING | |
| 8. | 8S-9076 | [1] | CUP-BEARING | |
| 9. | 095-0706 M | [16] | BOLT-SOCKET HEAD (M16X2X110-MM) | |
| 10. | 3K-0360 | [2] | SEAL-O-RING | |
| 11. | 9S-8005 | [2] | PLUG (3/4-16-THD) | |
| 12. | 6V-7418 | [1] | PLUG-PIPE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32970419
104-1808: DRIVE GP-WHEEL
For full view, you need register
Parts for your 143H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 147-7821 | [1] | SPINDLE | |
| 2. | 101-0477 | [1] | WHEEL | |
| 3. | 166-8646 CY | [1] | MOTOR GP-PISTON (RH) | |
| 4. | 145-8032 | [1] | SEAL GP-DUO-CONE | |
| 5P-1608 | [2] | RING-SEALING | ||
| 5. | 5P-3236 | [1] | CONE-BEARING | |
| 6. | 4F-2041 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 7. | 8S-9075 | [1] | CONE-BEARING | |
| 8. | 8S-9076 | [1] | CUP-BEARING | |
| 9. | 095-0706 M | [16] | BOLT-SOCKET HEAD (M16X2X110-MM) | |
| 10. | 3K-0360 | [2] | SEAL-O-RING | |
| 11. | 9S-8005 | [2] | PLUG (3/4-16-THD) | |
| 12. | 6V-7418 | [1] | PLUG-PIPE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
