310-9680 ENGINE AR S/N CKE2054-UP PART OF 151-1437 GENERAL AR 311C EXCAVATOR

Part No	Qty	Parts name
162-6324 Y	[1]	AIR CLEANER GP
162-6325 Y	[1]	COMPRESSOR GP-REFRIGERANT
185-8139 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
162-6318 Y	[1]	LINES GP-AIR
162-6320 Y	[1]	LINES GP-MUFFLER DRAIN
		-OR-
212-8514 Y	[1]	LINES GP-MUFFLER DRAIN
162-6321 Y	[1]	LINES GP-ENGINE OIL DRAIN
162-6317 Y	[1]	MOUNTING GP-ENGINE
162-6315 Y	[1]	RADIATOR & HYD OIL COOLER GP
Y		SEPARATE ILLUSTRATION

#SEBP33250013

196-7979: CAMSHAFT GP

CAMSHAFT GP

196-7979 CAMSHAFT GP
S/N 6LK1-UP
PART OF 162-6322, 205-6714 ENGINE AR
ALSO AN ATTACHMENT

i01436795 SEBP3325

For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-7723	[8]	PUSHROD
2.	324-4060	[8]	TAPPET
3.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
4.	3B-4505	[2]	LOCKWASHER
5.	5I-7650	[1]	PLATE
6.	094-4628	[1]	KEY
7.	196-7999	[1]	CAMSHAFT
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP33250014

196-8072: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

196-8072 COVER GP-VALVE MECHANISM
S/N 6LK1-UP
PART OF 162-6322, 205-6714 ENGINE AR
ALSO AN ATTACHMENT

i01436699 SEBP3325

1968072 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4186 M	[4]	BOLT (M10X1.5X40-MM)
2.	5I-7904	[1]	COVER
3.	5I-7905	[1]	GASKET (VALVE COVER)
4.	4P-6445	[1]	PLATE-CAT
5.	297-7662	[1]	CAP (OIL FILL)
	M		METRIC PART

#SEBP33250015

205-6811: CRANKSHAFT GP

CRANKSHAFT GP

205-6811 CRANKSHAFT GP
S/N 6LK1-UP
PART OF 205-6714 ENGINE AR
ALSO AN ATTACHMENT

i01771677 SEBP3325

For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	135-2419	[1]	CRANKSHAFT AS
2.	130-7596	[1]	NUT
3.	085-9513	[2]	PIN
4.	094-4628	[2]	KEY
5.	5I-7674	[1]	GEAR
6.	233-1277	[1]	PLATE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP33250016

5I-8130: CRANKSHAFT GP

CRANKSHAFT GP

5I-8130 CRANKSHAFT GP
S/N 6LK1-UP
PART OF 162-6322 ENGINE AR

i01436235 SEBP3325

For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	135-2419	[1]	CRANKSHAFT AS
2.	130-7596	[1]	NUT
3.	085-9513	[2]	PIN
4.	094-4628	[2]	KEY
5.	5I-7674	[1]	GEAR
6.	125-2969	[1]	PULLEY AS
7.	5I-7540	[1]	SLEEVE
8.	233-1277	[1]	PLATE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP33250017

196-8067: CYLINDER BLOCK GP

CYLINDER BLOCK GP

196-8067 CYLINDER BLOCK GP
S/N 6LK1-UP
PART OF 162-6322 ENGINE AR

i01513657 SEBP3325

For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	212-8478 Y	[1]	CYLINDER BLOCK GP
2.	5I-7654	[3]	PLATE (STANDARD)
	5I-7787 AB	[3]	PLATE (0.15-MM OS)
	5I-7788 AB	[3]	PLATE (0.3-MM OS)
	5I-7789 AB	[3]	PLATE (0.45-MM OS)
3.	266-6210	[1]	SWITCH-PRESSURE (ENGINE OIL)
4.	5I-7636	[1]	EYE
5.	212-8511	[1]	EYE
6.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
7.	096-2501	[3]	LOCKWASHER
8.	5I-7978	[1]	SLEEVE
9.	4D-7794	[1]	CLIP
10.	7X-2536 M	[1]	BOLT (M8X1.25X14-MM)
11.	3B-4505	[1]	LOCKWASHER
12.	5I-7588	[5]	SET-BEARING (STANDARD)
	5I-7784 AB	[5]	SET-BEARING (0.25-MM US)
	5I-7785 AB	[5]	SET-BEARING (0.5-MM US)
	5I-7786 AB	[5]	SET-BEARING (0.75-MM US)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33250018

205-6839: CYLINDER BLOCK GP

CYLINDER BLOCK GP

205-6839 CYLINDER BLOCK GP
S/N 6LK1-UP
PART OF 205-6714 ENGINE AR
ALSO AN ATTACHMENT

i01645566 SEBP3325

For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	212-8479	[1]	EYE
2.	212-8511	[1]	EYE
3.	8T-4179 M	[4]	BOLT (M12X1.75X20-MM)
4.	096-2501	[4]	LOCKWASHER
5.	5I-7588	[5]	SET-BEARING (STANDARD)
	5I-7784 AB		SET-BEARING (0.25-MM US)
	5I-7785 AB		SET-BEARING (0.5-MM US)
	5I-7786 AB		SET-BEARING (0.75-MM US)
6.	5I-7654	[3]	PLATE (STANDARD)
	5I-7787 AB		PLATE (0.15-MM OS)
	5I-7788 AB		PLATE (0.3-MM OS)
	5I-7789 AB		PLATE (0.45-MM OS)
7.	266-6210	[1]	SWITCH-PRESSURE (ENGINE OIL PRESSURE)
8.	4D-7794	[1]	CLIP
9.	5I-7978	[1]	SLEEVE
10.	7X-2536 M	[1]	BOLT (M8X1.25X14-MM)
11.	3B-4505	[1]	LOCKWASHER
12.	212-8478 Y	[1]	CYLINDER BLOCK GP
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33250019

212-8478: CYLINDER BLOCK GP

CYLINDER BLOCK GP

212-8478 CYLINDER BLOCK GP
S/N 6LK1-UP
PART OF 196-8067, 205-6839 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i01667945 SEBP3325

For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	095-2039	[1]	WASHER-SPECIAL
2.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
3.	5I-7523	[4]	SLEEVE
4.	5I-7724	[2]	PIN
5.	095-2005	[2]	CAP
6.	222-8201	[1]	SHAFT
8.	096-3741	[5]	CAP
9.	3P-1896	[5]	PLUG-CUP
11.	094-7741 M	[10]	BOLT-BEARING CAP (M14X2X120-MM)
12.	5I-8009	[1]	BUSHING
13.	5I-7528	[1]	BUSHING
14.	5I-7526	[4]	VALVE (COOLING JET)
15.	5I-7529	[1]	BUSHING
16.	5I-7525	[1]	PLUG
17.	099-4420	[2]	PIN
18.	5I-7505	[10]	PLUG
19.	095-2011	[1]	CAP
20.	6V-8236	[6]	PIN-SPRING
21.	5I-7524	[2]	SEAL
	M		METRIC PART

Information:

ENGINE ARRANGEMENT

ENGINE AR

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 311C :

301-2592 CONVERSION AR-ENGINE

301-2591 CONVERSION AR-ENGINE

151-1437 GENERAL AR

199-9408 COLD WEATHER AR

310-9681 ENGINE AR

162-6323 INSTALLATION AR-ENGINE

196-7979 CAMSHAFT GP

196-8072 COVER GP-VALVE MECHANISM

205-6811 CRANKSHAFT GP

5I-8130 CRANKSHAFT GP

196-8067 CYLINDER BLOCK GP

205-6839 CYLINDER BLOCK GP

Truck sale:

CATERPILLAR 311C 2005
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -

CATERPILLAR 311C 2007
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -

2008 CAT 311C

EURO AUCTIONS
United Kingdom

CATERPILLAR 311 C 2006
- TRACK EXCAVATORS
PON EQUIPMENT DENMARK
Denmark

2007 CAT 311C

EURO AUCTIONS
United Kingdom