168-7967 ENGINE AR S/N 4ZF4479-24243 PART OF 162-5605 GENERAL AR 12H MOTOR GRADER

Part No	Qty	Parts name
Y	[1]	AIR COMPRESSOR GP
226-3760 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
174-6503 Y	[1]	COOLER GP-TRANSMISSION OIL
183-3649 Y	[1]	COVER GP-CYLINDER BLOCK
197-4563 Y	[1]	COVER GP-FRONT HOUSING
175-4131 Y	[1]	COVER GP-VALVE MECHANISM
		S/N 4ZF4479-6309
164-6490 Y	[1]	COVER GP-VALVE MECHANISM
		S/N 4ZF6310-24243
172-9950 Y	[1]	DAMPER & PULLEY GP
188-9037 Y	[1]	ELBOW GP-AIR INLET
Y	[1]	ELBOW GP-EXHAUST
200-1215 Y	[1]	ELBOW GP-WATER (INLET)
168-7966 Y	[1]	ENGINE AR-CORE
205-5294 Y	[1]	FILTER GP-ENGINE OIL
176-5739 Y	[1]	FILTER GP-FUEL
172-6483 Y	[1]	FLYWHEEL GP
191-6632 Y	[1]	FUMES DISPOSAL GP
190-1101 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
118-7284 Y	[1]	STARTING AID GP (HEATER)
187-4087 Y	[1]	HOUSING GP-FLYWHEEL
169-3113 Y	[1]	LIFTING GP-ENGINE
195-0328 Y	[1]	LINES GP-ENGINE OIL
190-1103 Y	[1]	LINES GP-FUEL
190-1097 Y	[1]	LINES GP-TURBOCHARGER OIL
223-5548 Y	[1]	LINES GP-WATER
189-9987 Y	[1]	MANIFOLD GP-EXHAUST
190-1048 Y	[1]	MOUNTING GP-FUEL FILTER
177-9816 Y	[1]	MOUNTING GP-SOLENOID
		S/N 4ZF4479-5909
179-3421 Y	[1]	PAN GP-OIL
224-7129 Y	[1]	PLUG GP-ENGINE
213-5158 Y	[1]	PULLEY GP-IDLER (BELT TENSIONER)
190-1105 Y	[1]	PUMP GP-FILTER & FUEL TRANSFER
197-9564 Y	[1]	PUMP GP-WATER
178-3899 Y	[1]	SEAL GP-CRANKSHAFT
211-8620 Y	[1]	SENSOR GP-ENGINE
171-5288 Y	[1]	STARTING MOTOR GP-ELECTRIC
172-0961 Y	[1]	SUPPORT GP-ENGINE
222-9135 Y	[1]	WIRING GP-ENGINE ELECTRONIC
		S/N 4ZF4479-5909;7940-24243
234-2432 Y	[1]	WIRING GP-ENGINE ELECTRONIC
		S/N 4ZF5910-7939
212-8150 Y	[1]	STARTING AID GP (WIRING)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
430-7807 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
428-9219 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1469 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1476 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
Y		SEPARATE ILLUSTRATION

#SEBP33270011

285-6123: ENGINE AR

ENGINE AR

285-6123 ENGINE AR
S/N 4ZF24244-UP
138 BRAKE KW (185 BHP) @ 2000 RPM
PART OF 162-5605 GENERAL AR

i02879410 SEBP3327

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
Y	[1]	AIR COMPRESSOR GP
226-3760 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
174-6503 Y	[1]	COOLER GP-TRANSMISSION OIL
183-3649 Y	[1]	COVER GP-CYLINDER BLOCK
197-4563 Y	[1]	COVER GP-FRONT HOUSING
164-6490 Y	[1]	COVER GP-VALVE MECHANISM
172-9950 Y	[1]	DAMPER & PULLEY GP
188-9037 Y	[1]	ELBOW GP-AIR INLET
Y	[1]	ELBOW GP-EXHAUST
200-1215 Y	[1]	ELBOW GP-WATER (INLET)
168-7966 Y	[1]	ENGINE AR-CORE
205-5294 Y	[1]	FILTER GP-ENGINE OIL
176-5739 Y	[1]	FILTER GP-FUEL
172-6483 Y	[1]	FLYWHEEL GP
191-6632 Y	[1]	FUMES DISPOSAL GP
190-1101 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
187-4087 Y	[1]	HOUSING GP-FLYWHEEL
169-3113 Y	[1]	LIFTING GP-ENGINE
195-0328 Y	[1]	LINES GP-ENGINE OIL
190-1103 Y	[1]	LINES GP-FUEL
190-1097 Y	[1]	LINES GP-TURBOCHARGER OIL
223-5548 Y	[1]	LINES GP-WATER
189-9987 Y	[1]	MANIFOLD GP-EXHAUST
190-1048 Y	[1]	MOUNTING GP-FUEL FILTER
179-3421 Y	[1]	PAN GP-OIL
224-7129 Y	[1]	PLUG GP-ENGINE
213-5158 Y	[1]	PULLEY GP-IDLER (BELT TENSIONER)
190-1105 Y	[1]	PUMP GP-FILTER & FUEL TRANSFER
197-9564 Y	[1]	PUMP GP-WATER
178-3899 Y	[1]	SEAL GP-CRANKSHAFT
211-8620 Y	[1]	SENSOR GP-ENGINE
118-7284 Y	[1]	STARTING AID GP (HEATER)(AIR INLET HEATER)
212-8150 Y	[1]	STARTING AID GP (WIRING)
171-5288 Y	[1]	STARTING MOTOR GP-ELECTRIC
172-0961 Y	[1]	SUPPORT GP-ENGINE
222-9135 Y	[1]	WIRING GP-ENGINE ELECTRONIC

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
430-7807 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
428-9219 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1469 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1476 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
Y		SEPARATE ILLUSTRATION

#SEBP33270012

168-7966: ENGINE AR-CORE

ENGINE AR-CORE

168-7966 ENGINE AR-CORE
S/N 4ZF4479-UP
PART OF 168-7967, 285-6123 ENGINE AR

i01871426 SEBP3327

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
164-6100 Y	[1]	CAMSHAFT GP
188-3826 Y	[1]	COOLER GP-ENGINE OIL
164-6148 Y	[1]	CRANKSHAFT GP
161-3406 Y	[1]	CYLINDER BLOCK GP
210-5987 Y	[1]	CYLINDER HEAD GP
212-6700	[1]	ELECTRONICS GP-ENGINE RATINGS
155-7918 Y	[1]	GEAR GP-FRONT
165-4446 Y	[1]	HOUSING GP-FRONT
177-7878 Y	[1]	PISTON & ROD GP
191-3517 Y	[1]	PUMP & MTG GP-UNIT INJ HYD
195-8098 Y	[1]	PUMP GP-ENGINE OIL
166-1759 Y	[1]	PUMP GP-FUEL INJECTION
190-1104 Y	[1]	TURBOCHARGER GP
155-7927 Y	[1]	VALVE MECHANISM GP
Y		SEPARATE ILLUSTRATION

#SEBP33270013

159-6011: AIR COMPRESSOR GP

AIR COMPRESSOR GP

159-6011 AIR COMPRESSOR GP
S/N 4ZF4479-UP
250CC
PART OF 168-7967, 285-6123 ENGINE AR

i01871506 SEBP3327

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	135-9819	[1]	SEAL-INTEGRAL
2.	188-8715 I	[1]	HOSE AS
3.	189-3132 I	[1]	HOSE AS
4.	193-2353	[1]	TUBE AS
5.	148-8340	[1]	CONNECTOR AS
	3K-0360	[1]	SEAL-O-RING (16.36MM ID)
	6V-8398	[1]	SEAL-O-RING (16.03MM OD)
	6V-8639	[1]	CONNECTOR
6.	148-8364	[2]	ELBOW AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING (16.36MM ID)
	6V-8398	[1]	SEAL-O-RING (16.03MM OD)
	6V-8625	[1]	ELBOW
7.	148-8368	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING (11.89MM ID)
	4J-5477	[1]	SEAL-O-RING (11.23MM OD)
	6V-8627	[1]	ELBOW
8.	224-0003 Y	[1]	AIR COMPRESSOR GP
9.	3J-7354	[1]	SEAL-O-RING (8.92MM ID)
10.	3K-0360	[1]	SEAL-O-RING (16.36MM ID)
11.	4J-5477	[1]	SEAL-O-RING (11.23MM OD)
12.	5C-7261 M	[2]	NUT (M8X1.25-THD)
13.	5K-4778	[1]	CLIP
14.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
15.	6D-4246	[2]	CLIP (LOOP)
16.	6V-8628	[1]	ELBOW
17.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
19.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
20.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
21.	9R-2216	[1]	BOSS
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33270014

224-0003: AIR COMPRESSOR GP

AIR COMPRESSOR GP

224-0003 AIR COMPRESSOR GP
S/N 4ZF4479-UP
10.9 CFM AT 1250 RPM
PART OF 159-6011 AIR COMPRESSOR GP
Type 1

i01871813 SEBP3327

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
2.	2P-4358	[1]	FLANGE
3.	179-7383	[1]	SEAL-O-RING
4.	3K-0360	[1]	SEAL-O-RING
5.	6D-1004	[1]	GASKET
6.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
7.	6V-5221 M	[4]	BOLT (M8X1.25X80-MM)
8.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
9.	8T-2396 M	[2]	BOLT (M6X1X60-MM)
10.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
11.	9S-8005	[1]	PLUG (3/4-16-THD)
	M		METRIC PART

#SEBP33270015

224-0003: AIR COMPRESSOR GP

AIR COMPRESSOR GP

224-0003 AIR COMPRESSOR GP
S/N 4ZF4479-UP
10.9 CFM AT 1250 RPM
PART OF 159-6011 AIR COMPRESSOR GP
Type 2

i05394351 SEBP3327

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
2.	033-6031	[1]	SEAL-O-RING
3.	179-7383	[1]	SEAL-O-RING
4.	3K-0360	[1]	SEAL-O-RING
5.	9S-8005	[1]	PLUG (3/4-16-THD)
6.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
7.	6V-5221 M	[4]	BOLT (M8X1.25X80-MM)
8.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
9.	8T-2396 M	[2]	BOLT (M6X1X60-MM)
10.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP33270016

164-6100: CAMSHAFT GP

CAMSHAFT GP

164-6100 CAMSHAFT GP
S/N 4ZF4479-UP
PART OF 168-7966 ENGINE AR-CORE

i01804055 SEBP3327

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-7694	[1]	PLATE-THRUST
2.	216-9782	[1]	CAMSHAFT AS
2A.	1B-8705	[1]	KEY-WOODRUFF
2B.	205-1322	[1]	GEAR-CAMSHAFT (100-TEETH)
3.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP33270017

183-3649: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

183-3649 COVER GP-CYLINDER BLOCK
S/N 4ZF4479-UP
PROVIDES BREATHER, PROVIDES LH SIDE BLOCK COVER WITH PORTS FOR OIL ACCESS
PART OF 168-7967, 285-6123 ENGINE AR

i01872030 SEBP3327

1833649 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5N-4185	[1]	WASHER-SPECIAL
2.	213-2410	[1]	GASKET
3.	213-2411	[1]	COVER (CYLINDER BLOCK)
4.	240-0041	[1]	BREATHER AS (CRANKCASE)
5.	3E-8005 M	[1]	BOLT (M8X1.25X160-MM)
6.	6V-3918 M	[2]	BOLT (M8X1.25X50-MM)
7.	6V-3940 M	[9]	BOLT (M8X1.25X25-MM)
8.	9F-4446	[1]	SEAL-O-RING
9.	9M-1974	[11]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP33270018

197-4563: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

197-4563 COVER GP-FRONT HOUSING
S/N 4ZF4479-UP
PART OF 168-7967, 285-6123 ENGINE AR

i01695054 SEBP3327

1974563 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-2099 M	[3]	STUD (M8X1.25X52.75-MM)
2.	002-3448	[1]	CLIP
3.	108-3612	[1]	SPACER (11.13X19.05X53-MM THK)
4.	159-0286	[1]	TUBE AS-FILLER
5.	166-1776	[1]	COVER AS-FRONT
5A.	126-1757	[2]	WASHER (10.85X19.3X1.27-MM THK)
5B.	136-0822	[2]	STUD
6.	166-1781	[1]	GASKET
7.	185-9356 M	[1]	STUD (M8X1.25-THD)
8.	241-5645	[1]	CAP AS-ENGINE OIL FILLER (ENGINE OIL)
9.	061-9455	[1]	SEAL-O-RING
10.	5C-7261 M	[2]	NUT (M8X1.25-THD)
11.	6V-2317 M	[9]	BOLT (M8X1.25X30-MM)
12.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
13.	8T-0100 M	[1]	BOLT (M8X1.25X60-MM)
14.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
15.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP33270019

164-6490: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

164-6490 COVER GP-VALVE MECHANISM
S/N 4ZF6310-23503
PART OF 168-7967 ENGINE AR

i01671185 SEBP3327

1646490 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-4531	[1]	CAP AS-ENGINE OIL FILLER (ENGINE OIL)
	7F-8268	[1]	SEAL-O-RING
2.	208-0039	[9]	FASTENER AS
3.	218-0397	[1]	COVER AS-BASE
3A.	217-5701 J		SEAL-BULK (2.3M)
4.	230-6156	[1]	COVER GP (TOP)
4A.	5P-5678 D		SEAL (2.3M)
5.	6V-5219 M	[11]	BOLT (M8X1.25X40-MM)
6.	9M-1974	[11]	WASHER-HARD (8.8X16X2-MM THK)
	D		ORDER BY THE METER
	J		ORDER BY THE DECIMETER
	M		METRIC PART

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

Engine News

A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
2010/02/03

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
C-9 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

General Information
C-9 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Troubleshooting

Low Engine Oil Pressure
C-9 Engine for the 973C Track-Type Loader

Engine Stalls at Low RPM
C-9 Engine for the 973C Track-Type Loader

Excessive Black Smoke
C-9 Engine for the 973C Track-Type Loader

Low Power/Poor or No Response to Throttle
C-9 Engine for the 973C Track-Type Loader

Poor Acceleration or Response
C-9 Engine for the 973C Track-Type Loader

How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines

Engine Misfires, Runs Rough or Is Unstable
C-9 Engine for the 973C Track-Type Loader

E190 Engine Overspeed Warning
C-9 Engine for the 973C Track-Type Loader

Excessive White Smoke
C-9 Engine for the 973C Track-Type Loader

Engine Vibration
C-9 Engine for the 973C Track-Type Loader

Excessive Fuel Consumption
C-9 Engine for the 973C Track-Type Loader

Engine Cranks but Will Not Start
C-9 Engine for the 973C Track-Type Loader

Diagnostic Codes
C-9 Engine for Caterpillar Built Machines

Engine Will Not Crank
C-9 Engine for the 973C Track-Type Loader

Service Magazine

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

Caterpillar Parts SIS Catalog 12H :

236-3947 SNOW AR-MOTOR GRADER

197-5954 SNOW AR-MOTOR GRADER

197-5572 ROADING AR

162-5605 GENERAL AR

257-7444 CONVERSION AR-MACHINE

277-5451 CONVERSION AR-CERTIFICATION

277-5446 CONVERSION AR-CERTIFICATION

210-2043 CONVERSION AR-CERTIFICATION

285-6123 ENGINE AR

168-7966 ENGINE AR-CORE

159-6011 AIR COMPRESSOR GP

224-0003 AIR COMPRESSOR GP

164-6100 CAMSHAFT GP

183-3649 COVER GP-CYLINDER BLOCK

197-4563 COVER GP-FRONT HOUSING

Truck sale:

115,000

Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico

116,500

Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico

87,000

Caterpillar 12H, Construction
- motor graders
MADISA
Mexico

106,008

Caterpillar 12 H, Construction
- motor graders
TRACTAFRIC EQUIPMENT
Netherlands

90,000

Caterpillar 12H, Construction
- motor graders
NMC