174-1766 FLYWHEEL GP S/N 3PD1-UP PART OF 161-1747, 285-8268 ENGINE AR 14H MOTOR GRADER

Pos.	Part No	Qty	Parts name
1.	9Y-3520	[1]	GEAR AS (61-TEETH)
2.	7C-7852	[1]	BEARING
3.	8T-0281 M	[2]	BOLT (M16X2X80-MM)
4.	7C-7851	[1]	SHAFT
5.	133-7083	[1]	SHAFT
6.	133-7086	[1]	GEAR AS-IDLER (71-TEETH)
	M		METRIC PART

#SEBP33280032

200-0765: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

200-0765 HOUSING GP-FLYWHEEL
S/N 3PD1-2403
PART OF 161-1747 ENGINE AR

i01643514 SEBP3328

2000765 HOUSING GP-FLYWHEEL Parts scheme

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	200-0769	[1]	HOUSING-FLYWHEEL
2.	9S-4185	[2]	PLUG (3/4-16-THD)
3.	6V-8197 M	[12]	BOLT (M12X1.75X40-MM)
4.	5P-8245	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
6.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
7.	7C-1445	[1]	COVER
8.	3K-8460	[1]	PLUG (1/2-20-THD)
9.	5P-7814	[1]	SEAL-O-RING
10.	9S-9334	[1]	PLUG (1-5/16-12-THD)
11.	5P-7701	[1]	SEAL-O-RING
12.	061-9455	[1]	SEAL-O-RING
13.	8L-2786	[2]	SEAL-O-RING
14.	5D-9344	[1]	SEAL-O-RING
15.	1U-8846 B		SEALANT-GASKET
16.	5F-0304	[1]	PLUG
17.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
18.	2A-1162	[1]	GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP33280033

200-0765: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

200-0765 HOUSING GP-FLYWHEEL
S/N 3PD2404-UP
PART OF 161-1747, 285-8268 ENGINE AR

i01823018 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	200-0769	[1]	HOUSING-FLYWHEEL
2.	9S-4185	[2]	PLUG (3/4-16-THD)
3.	6V-8197 M	[12]	BOLT (M12X1.75X40-MM)
4.	5P-8245	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
6.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
7.	7C-1445	[1]	COVER
8.	3K-8460	[1]	PLUG (1/2-20-THD)
9.	5P-7814	[1]	SEAL-O-RING
10.	9S-9334	[1]	PLUG (1-5/16-12-THD)
11.	5P-7701	[1]	SEAL-O-RING
12.	061-9455	[1]	SEAL-O-RING
13.	8L-2786	[2]	SEAL-O-RING
14.	5D-9344	[1]	SEAL-O-RING
15.	1U-8846 B		SEALANT-GASKET
16.	5F-0304	[1]	PLUG
18.	2A-1162	[1]	GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP33280034

133-7075: HOUSING GP-FRONT

HOUSING GP-FRONT

133-7075 HOUSING GP-FRONT
S/N 3PD1-UP
PART OF 161-1747, 285-8268 ENGINE AR

i01219450 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	169-4170 C	[1]	HOUSING AS-FRONT
1A.	2H-5549	[1]	RING-RETAINING
1B.	8H-9789	[2]	BALL BEARING
1C.	115-9424	[1]	GEAR-PUMP DRIVE (34-TEETH)
1D.	2A-3348	[2]	DOWEL
1E.	6V-3538	[2]	DOWEL
1F.	3H-7654	[2]	WASHER-HARD (13.5X22.5X3-MM THK)
1G.	8T-0343 M	[2]	BOLT-SOCKET HEAD (M12X1.75X55-MM)
2.	204-0712 M	[13]	BOLT (M8X1.25X30-MM)
			-OR-
	6V-5219 M	[13]	BOLT (M8X1.25X40-MM)
3.	9M-1974	[33]	WASHER-HARD (8.8X16X2-MM THK)
4.	262-7131	[1]	COVER GP-FRONT HOUSING
5.	174-2475	[1]	SEAL-INTEGRAL
6.	262-8382	[1]	GASKET
7.	226-4755	[1]	SEAL GP-CRANKSHAFT
8.	220-3373	[1]	SEAL-RING (CRANKSHAFT)
9.	5P-0537	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
10.	6V-8225 M	[5]	NUT (M6X1-THD)
11.	6V-2317 M	[19]	BOLT (M8X1.25X30-MM)
12.	3E-8016 M	[1]	BOLT-SELF-LOCKING (M8X1.25X25-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP33280035

415-8632: KIT-CYLINDER HEAD

KIT-CYLINDER HEAD

415-8632 KIT-CYLINDER HEAD
S/N ASE1-UP
THIS CYLINDER HEAD REBUILD KIT IS BEING DESIGNED FOR USE OF THE 3176C ENGINE FOR THE FOLLOWING E MODELS:. 345B, 814F, 815F, 816F, D7R, 140H, 14H, 160H, 163H, D7RII, 966GII, AND 572RII
FOR USE WITH @@@@@161-1747@@@@@, @@@@@285-8268@@@@@

i05424147 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6I-1638	[12]	BASE-INJECTOR POSITIONING
100-8150	[24]	GUIDE-VALVE
138-2006	[12]	INSERT-VALVE SEAT (INLET)
179-9453	[12]	INSERT-VALVE SEAT (EXHAUST)
2A-4429	[48]	LOCK-RETAINER
3B-0623	[8]	PLUG-CUP (CYLINDER HEAD)
6V-7604	[16]	PLUG-CUP (MARKED X)
6I-2663	[24]	ROTOCOIL AS
		(EACH INCLUDES)
6I-2662	[1]	SHIELD
7C-8581	[1]	ROTOCOIL AS
116-1102	[6]	SLEEVE-INJECTOR
224-4441	[24]	SPRING (VALVE)
332-2152	[24]	SPRING-VALVE
133-7029	[12]	VALVE-EXHAUST
7E-9578	[12]	VALVE-INLET

#SEBP33280036

417-8844: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

417-8844 KIT-CYLINDER HEAD GASKET
S/N 3PD1-UP; ASE1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBER 317-8750-UP
PART OF 416-2492 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@161-1747@@@@@, @@@@@285-8268@@@@@, 3PD102-UP

i05233718 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-0451	[1]	GASKET
7E-5555	[1]	GASKET
7E-7912	[1]	GASKET
7W-5164	[3]	GASKET
9Y-1758	[1]	GASKET
109-5313	[6]	GASKET
118-2797	[4]	GASKET
188-6126	[1]	GASKET
187-3307	[1]	GASKET AS-CYLINDER HEAD
109-5309	[1]	GASKET-VALVE COVER
7C-8292	[8]	ISOLATOR
9X-6620 M	[4]	LOCKNUT (M10X1.5-THD)
5P-5678 D		SEAL (3-M)
198-6068	[1]	SEAL-INTEGRAL
3S-9643	[1]	SEAL-LIP TYPE
3J-1907	[5]	SEAL-O-RING
4G-4972	[6]	SEAL-O-RING
5P-7701	[4]	SEAL-O-RING
6V-3908	[2]	SEAL-O-RING
6V-5048	[3]	SEAL-O-RING
6V-5063	[1]	SEAL-O-RING
6V-6609	[8]	SEAL-O-RING
6V-8397	[2]	SEAL-O-RING
6V-8676	[1]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
7L-6580	[2]	SEAL-O-RING
8L-2786	[3]	SEAL-O-RING
106-9586	[4]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
214-7568	[4]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
D		ORDER BY THE METER
M		METRIC PART

#SEBP33280037

421-6811: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

421-6811 KIT-CYLINDER HEAD GASKET
S/N ASE1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ODER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBER 317-8750-UP

i05550229 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6V-0852	[1]	CAP-DUST
1P-0451	[1]	GASKET (TURBOCHARGER)
7E-5555	[1]	GASKET
7E-7912	[1]	GASKET (TEMPERATURE REGULATOR)
7W-5164	[3]	GASKET
9Y-1758	[1]	GASKET (CRANKCASE BREATHER)
109-5313	[6]	GASKET (EXHAUST MANIFOLD)
118-2797	[4]	GASKET
188-6126	[1]	GASKET
187-3307	[1]	GASKET AS-CYLINDER HEAD
109-5309	[1]	GASKET-VALVE COVER
7C-8292	[8]	ISOLATOR
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
5P-5678 D		SEAL (3-M)
361-8205	[6]	SEAL
198-6068	[1]	SEAL-INTEGRAL
3S-9643	[1]	SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)
3J-1907	[6]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
228-4947	[1]	SEAL-O-RING
4G-4972	[6]	SEAL-O-RING
5P-7701	[4]	SEAL-O-RING
6V-3908	[2]	SEAL-O-RING
6V-5048	[3]	SEAL-O-RING
6V-5063	[1]	SEAL-O-RING
6V-6609	[8]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8676	[1]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
7L-6580	[1]	SEAL-O-RING
8L-2786	[3]	SEAL-O-RING
061-9455	[1]	SEAL-O-RING
106-9586	[4]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
214-7568	[6]	SEAL-O-RING
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED
D		ORDER BY THE METER
M		METRIC PART

#SEBP33280038

431-1465: KIT-ENGINE GASKET

KIT-ENGINE GASKET

431-1465 KIT-ENGINE GASKET
S/N 3PD1-UP
CENTRAL AND LOWER STRUCTURE

i07244097 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
217-3674	[14]	FASTENER AS
8N-6854	[1]	GASKET
217-3673	[1]	SEAL-ISOLATION
3D-2824	[1]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
4F-7952	[1]	SEAL-O-RING
5P-7813	[2]	SEAL-O-RING
5P-8068	[2]	SEAL-O-RING
5P-8211	[1]	SEAL-O-RING
6V-1250	[1]	SEAL-O-RING
6V-5048	[4]	SEAL-O-RING
6V-5134	[3]	SEAL-O-RING
8C-5230	[1]	SEAL-O-RING
8J-4351	[1]	SEAL-O-RING
8L-2786	[1]	SEAL-O-RING
061-9455	[1]	SEAL-O-RING
136-7227	[1]	SEAL-O-RING
214-7566	[1]	SEAL-O-RING
214-7568	[6]	SEAL-O-RING
228-4947	[1]	SEAL-O-RING
295-5609	[1]	SEAL-O-RING
346-4897	[1]	SEAL-O-RING
6L-2609	[1]	SEAL-RUBBER

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP33280039

20R-1433: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1433 KIT-ENGINE OVERHAUL
S/N 3PD1-UP
(GOLD OVERHAUL KIT)
PART OF 161-1747, 285-8268 ENGINE AR
FOR USE WITH @@@@@285-8268@@@@@, @@@@@161-1747@@@@@, 3176C MACHINE ENGINE

i05235077 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
416-2492 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

0R-8778	[6]	KIT-CYLINDER PACK
		(EACH INCLUDES)
168-7212	[1]	RING-PISTON (TOP)
133-7098	[1]	CROWN AS-PISTON
238-2710	[1]	SKIRT-PISTON
197-9335	[1]	PIN AS
0R-8188	[1]	ROD AS-CONNECTING
7C-8639 M	[2]	BOLT-CONNECTING ROD
7N-2043	[2]	DOWEL
7W-5844	[1]	BEARING
4P-1659	[1]	RING-PISTON (OIL CONTROL)
104-3560	[1]	SEAL-LINER
109-5319	[1]	RING-PISTON
148-2125	[1]	LINER-CYLINDER BLOCK

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION