ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
ELECTRONICS GP-POWER TRAIN
BATTERY GP
ELECTRICAL AND STARTING SYSTEM
ALARM GP
#SEBP33280150
123-6449: ALARM GP
123-6449 ALARM GP
S/N ASE1-UP
12-VOLT TO 36-VOLT
PART OF 200-4983 WIRING GP-REAR, 194-7982 WIRING GP-REAR LIGHTING
S/N ASE1-UP
12-VOLT TO 36-VOLT
PART OF 200-4983 WIRING GP-REAR, 194-7982 WIRING GP-REAR LIGHTING
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS#SEBP33280151
3E-6328: ALARM GP
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS#SEBP33280152
200-2232: ALTERNATOR GP-CHARGING
200-2232 ALTERNATOR GP-CHARGING
S/N 3PD1-UP; ASE1-UP
24-VOLT, 75-AMPERE
PART OF 212-0615, 233-0712 ALTERNATOR GP-CHARGING
S/N 3PD1-UP; ASE1-UP
24-VOLT, 75-AMPERE
PART OF 212-0615, 233-0712 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 2. | 1H-3244 | [2] | LOCKWASHER | |
| 3. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 4. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 5. | 9L-6770 | [1] | CAP-DUST | |
| 6. | 231-6133 | [1] | KIT-BEARING (ALTERNATOR) | |
| (INCLUDES BEARING AS & RACE) | ||||
| 7. | 231-6134 | [1] | KIT-RECTIFIER (ALTERNATOR) | |
| (INCLUDES RECTIFIER, SCREWS, CONNECTOR, WASHERS & ADAPTER) | ||||
| 8. | 202-2708 | [1] | DIODE AS | |
| 9. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 10. | 229-8906 | [1] | CAPACITOR AS | |
| 11. | 202-9897 | [1] | BEARING-SPECIAL BALL | |
| 12. | 100-6531 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 13. | 187-2034 | [1] | NUT-FLANGE (5/8-18-THD) | |
| 14. | 202-2783 | [1] | PLATE | |
| 15. | 202-7711 | [1] | HOUSING AS | |
| 16. | 202-7713 | [1] | FRAME AS | |
| 17. | 202-8647 | [1] | STATOR AS | |
| 18. | 202-2703 | [1] | COIL AS | |
| 19. | 9S-2390 | [1] | RETAINER | |
| 20. | 9S-2302 | [1] | ROTOR AS | |
| 21. | 4B-2047 | [1] | NUT (10-24-THD) | |
| 22. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 23. | 8F-1434 | [1] | LOCKWASHER | |
| 24. | 202-2784 | [1] | KIT-ALTERNATOR TERMINAL (OUTPUT) | |
| (INCLUDES NUT, WASHERS, INSULATORS, SCREWS, CONNECTORS & ADAPTER) | ||||
| 25. | 202-2785 | [1] | KIT-ALTERNATOR TERMINAL (RELAY) | |
| (INCLUDES STUD, BUSHINGS, WASHERS, CONNECTORS & NUT) | ||||
| 26. | 202-2786 | [1] | KIT-ALTERNATOR TERMINAL (INDICATOR LIGHT) | |
| (INCLUDES NUTS, WASHERS, CONNECTOR & STUD) | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 202-2787 | [1] | KIT-HARDWARE (ALTERNATOR) | ||
| (INCLUDES BOLTS, NUTS, PLUGS, SCREWS, LOCKWASHER, CONNECTOR, COLLAR & BOOT) | ||||
#SEBP33280153
212-0615: ALTERNATOR GP-CHARGING
212-0615 ALTERNATOR GP-CHARGING
S/N 3PD1-4383
24 VOLT, 75 AMPERE
PART OF 161-1747 ENGINE AR
S/N 3PD1-4383
24 VOLT, 75 AMPERE
PART OF 161-1747 ENGINE AR
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 169-4657 | [1] | BRACKET | |
| 2. | 199-9959 | [1] | GUARD AS | |
| 3. | 200-2232 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 75-AMPERE) | |
| 4. | 3E-4353 | [3] | WASHER-HARD (11X25X3-MM THK) | |
| 5. | 6V-1820 M | [3] | BOLT (M10X1.5X30-MM) | |
| 6. | 8T-0643 M | [2] | BOLT (M10X1.5X80-MM) | |
| 7. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
| 9. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33280154
226-7683: ALTERNATOR GP-CHARGING
226-7683 ALTERNATOR GP-CHARGING
S/N ASE1-UP
24-VOLT, 95-AMPERE
PART OF 233-0713 ALTERNATOR GP-CHARGING
S/N ASE1-UP
24-VOLT, 95-AMPERE
PART OF 233-0713 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-9656 | [1] | FRAME AS-DRIVE END | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 228-9655 | [1] | FRAME AS-ALTERNATOR | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 205-0626 | [1] | STATOR AS-ALTERNATOR | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES BEARINGS) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES BOLTS) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, GROMMET, PLATE, PIN, INSULATOR, NUT) | ||||
| 199-7891 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS, NUTS) | ||||
#SEBP33280155
233-0712: ALTERNATOR GP-CHARGING
233-0712 ALTERNATOR GP-CHARGING
S/N ASE838-UP
24-VOLT, 75-AMPERE
PART OF 162-5606 GENERAL AR
S/N ASE838-UP
24-VOLT, 75-AMPERE
PART OF 162-5606 GENERAL AR
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 123-0790 | [1] | PULLEY (8-GROOVE) | |
| 2. | 312-8934 | [1] | BELT-SERPENTINE | |
| 3. | 199-9959 | [1] | GUARD AS | |
| 4. | 200-2232 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 75-AMPERE) | |
| 5. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33280156
233-0713: ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS#SEBP33280157
260-7647: APPLICATION GP-POWER TRAIN
260-7647 APPLICATION GP-POWER TRAIN
S/N ASE1380-UP
PART OF 247-6435 WIRING GP-GRADE CONTROL
S/N ASE1380-UP
PART OF 247-6435 WIRING GP-GRADE CONTROL
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 304-5687 | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP33280158
172-5655: BATTERY GP
172-5655 BATTERY GP -HEAVY DUTY
S/N ASE1-UP
PART OF 197-5959, 236-3952 SNOW AR-MOTOR GRADER
S/N ASE1-UP
PART OF 197-5959, 236-3952 SNOW AR-MOTOR GRADER
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8V-0622 | [1] | CABLE AS-BATTERY | |
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 5P-0761 E | CABLE (00-GA, RED)(14-CM) | |||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED) | ||
| 2. | 9R-4464 | [2] | ROD | |
| 3. | 153-5710 | [2] | BATTERY GP (12-VOLT, MAINTENANCE FREE, WET)(HEAVY DUTY) | |
| 4. | 189-0146 | [1] | HOLD-DOWN | |
| 5. | 229-0674 | [1] | BAR | |
| 6. | 174-5907 | [2] | CLIP (LOOP) | |
| 7. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 8. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 10. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP33280159
187-8028: BATTERY GP
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8V-0622 | [1] | CABLE AS-BATTERY | |
| 5P-0761 E | CABLE (00-GA, RED)(14CM) | |||
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 2. | 153-5700 | [2] | BATTERY AS (12-VOLT, 1125-CCA) | |
| 3. | 229-0674 | [1] | BAR | |
| 4. | 189-0146 | [1] | HOLD-DOWN | |
| 5. | 9R-6414 | [2] | ROD | |
| 6. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 7. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 9. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 10. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 11. | 174-5907 | [2] | CLIP (LOOP) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ALARM GP
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
