AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

173-1011 SWIVEL GP -CIRCLE DRIVE S/N ASE1-1752 PART OF 188-7252 LINES GP-HYDRAULIC 14H MOTOR GRADER


HYDRAULIC SYSTEM
SWIVEL GP
TANK GP
VALVE & LINKAGE GP

MOTOR GRADER 14H MOTOR GRADER ASE
 14H Motor Grader ASE00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3328 14H ASE   (2000)

HYDRAULIC SYSTEM

SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
 

#SEBP33280620
 

173-1011: SWIVEL GP

173-1011 SWIVEL GP -CIRCLE DRIVE
S/N ASE1-1752
PART OF 188-7252 LINES GP-HYDRAULIC
i01337016 SEBP3328
1731011 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-1009 [1] RETAINER  
2. 8J-2331 [7] SEAL  
3. 2H-3928 [7] SEAL-O-RING  
4. 173-1007 [2] SEAL  
5. 9T-5603 [1] BODY  
6. 4J-9964 [2] SEAL  
7. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 5P-2566 [6] BOLT (1/2-13X1.5-IN)  
9. 1P-3700 [4] SEAL-RECTANGULAR  
10. 223-0580 [1] COVER  
11. 173-1008 [1] ROTOR  
12. 5J-1246 B [6] SHIM (0.13-MM THK)  
  B   USE AS REQUIRED
 

#SEBP33280621
 

260-6502: SWIVEL GP

260-6502 SWIVEL GP -CIRCLE DRIVE
S/N ASE1753-UP
PART OF 188-7252 LINES GP-HYDRAULIC
i02277258 SEBP3328
2606502 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 8J-2331 [7] SEAL  
3. 454-3032 [1] ROTOR  
4. 173-1009 [1] RETAINER  
5. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
6. 454-2957 [1] BODY  
7. 148-8395 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
8. 173-1007 [2] SEAL  
9. 2H-3928 [7] SEAL-O-RING  
10. 4J-9964 [2] SEAL  
  B   USE AS REQUIRED
 

#SEBP33280622
 

207-2410: TANK & FILTER GP-HYDRAULIC

207-2410 TANK & FILTER GP-HYDRAULIC
S/N ASE1-UP
PART OF 207-2409 TANK & MTG GP-HYDRAULIC
i01645491 SEBP3328
2072410 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-2913 [1] PIN-CLEVIS  
2. 1R-0774 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)  
    -OR-
  4T-3134 [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)  
    -OR-
  139-1536 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
3. 2D-4202 [1] PLATE  
4. 3F-1547 [1] SEAL-O-RING  
6. 4M-6921 [1] WASHER-SPRING  
7. 5D-1911 [1] COVER-HYDRAULIC CAP  
8. 226-2871 [1] ROD  
9. 7H-1447 [1] CAP-FILLER (HYDRAULIC TANK)  
10. 9J-1979 [1] RETAINER AS  
13. 9J-3047 [1] STRAINER (HYDRAULIC OIL)  
14. 9M-7394 [1] LEVER (HYDRAULIC TANK FILL)  
15. 207-2411 [1] TANK AS-HYDRAULIC  
16. 226-2870 [1] CAP AS (HYDRAULIC TANK)  
17. 217-2661 [1] GAUGE-SIGHT (HYDRAULIC OIL)  
  5J-2974 [4] SEAL-O-RING  
  114-4231 [2] BOLT-MOUNTING  
18. 086-0507 [1] PIN  
19. 141-9661 [1] SPACER (20X128X6-MM THK)  
20. 1L-5072 [1] DOWEL  
21. 2J-7761 [1] RING-RETAINING  
22. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
23. 2S-5100 [1] VALVE-MANUAL  
24. 3G-0361 [1] GASKET  
26. 7D-1195 [1] SEAL-O-RING  
27. 8T-2275 [1] BALL  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 9H-6454 [1] GASKET  
31. 3B-4610 [1] PIN-COTTER  
  M   METRIC PART
 

#SEBP33280623
 

207-2409: TANK & MTG GP-HYDRAULIC

207-2409 TANK & MTG GP-HYDRAULIC
S/N ASE1-UP
PART OF 162-5606 GENERAL AR
i01658236 SEBP3328
2072409 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP (HYDRAULIC TANK)  
  5P-8500 [1] KEY (PADLOCK, HYDRAULIC TANK)  
2. 207-2410 Y [1] TANK & FILTER GP-HYDRAULIC  
3. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
4. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33280624
 

107-9662: VALVE & LINKAGE GP

107-9662 VALVE & LINKAGE GP -BANK 5 RH-BANK 7 LH-WING TILT
S/N ASE1-UP
PART OF 187-4952 CONTROL AR-HYDRAULIC
i00123086 SEBP3328
1079662 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8675 Y [1] VALVE GP-BANK 5 (RH)  
2. 104-8656 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 2G-7107 [1] KNOB-WING LIFT  
7. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
8. 8X-4276 [12] ROD  
  6V-8186 [24] NUT-FULL (5/16-24-THD)  
  7H-3641 [24] END-ROD (5/16-24-THD)  
9. 8D-5633 [1] LEVER (WHEEL LEAN)  
10. 101-2458 [1] LEVER (BLADE TIP)  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [14] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [24] LOCKWASHER  
18. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
19. 8D-5641 [12] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 8W-0456 [3] SHAFT  
33. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
34. 2G-7108 [1] KNOB-WING TILT  
35. 103-1597 [1] LEVER (WING TILT)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 2G-6740 [1] KNOB-RIPPER  
38. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
39. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
40. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 104-7429 [2] PLATE  
44. 137-4516 [1] SHAFT  
45. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
46. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
47. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
48. 8D-5633 [1] LEVER (SIDESHIFT)  
49. 101-2458 [1] LEVER (PLOW DOZER)  
50. 101-2458 [1] LEVER (WING LIFT)  
51. 101-2457 [1] LEVER (RIPPER)  
52. 8D-5634 [1] LEVER (LH)(BLADE LIFT)  
53. 8D-5632 [1] LEVER (RH)(BLADE LIFT)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33280625
 

124-4196: VALVE & LINKAGE GP

124-4196 VALVE & LINKAGE GP -BANK 4-RH-LH-EU
S/N ASE1-UP
PART OF 211-1769, 211-1770, 289-3511, 289-3512 CONVERSION AR-CERTIFICATION
i00123722 SEBP3328
1244196 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-3128 YC [1] VALVE GP-BANK 4 (RH)  
2. 130-3125 YC [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 7H-3641 [16] END-ROD (5/16-24-THD)  
  6V-8186 [16] NUT-FULL (5/16-24-THD)  
  8X-4276 [8] ROD  
7. 8D-5633 [1] LEVER (SIDE SHIFT)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
32. 104-7419 [1] PLATE AS (RH)  
    (EACH PLATE AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8D-5633 [1] LEVER (SIDE SHIFT)  
42. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
43. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33280626
 

124-4197: VALVE & LINKAGE GP

124-4197 VALVE & LINKAGE GP -BANK 4 RH-BANK 5 LH-EU
S/N ASE1-UP
PART OF 187-4947 CONTROL AR-HYDRAULIC
i00123725 SEBP3328
1244197 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [9] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5641 [9] BEARING  
12. 8L-8598 [9] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 146-0705 [9] ROD  
23. 130-3126 YC [1] VALVE GP-BANK 5 (LH)  
24. 130-3128 YC [1] VALVE GP-BANK 4 (RH)  
25. 2G-6740 [1] KNOB-RIPPER  
26. 2G-6747 [1] KNOB-BLADE TIP  
27. 2G-6748 [1] KNOB-BLADE LIFT  
28. 2G-6749 [1] KNOB-SIDESHIFT  
29. 2G-6751 [1] KNOB-CIRCLE DRIVE  
30. 2G-6752 [1] KNOB-ARTICULATION  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8186 [9] NUT-FULL (5/16-24-THD)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33280627
 

124-4198: VALVE & LINKAGE GP

124-4198 VALVE & LINKAGE GP -BANK 5-LH-RH-EU
S/N ASE1-UP
PART OF 187-4950 CONTROL AR-HYDRAULIC
i00123727 SEBP3328
1244198 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [10] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [12] BEARING  
11. 8D-5641 [10] BEARING  
12. 8L-8598 [10] ROD END  
13. 8W-0456 [1] SHAFT  
14. 8X-5499 [2] RETAINER  
15. 9M-1853 [6] MOUNTING  
16. 101-2457 [2] LEVER  
17. 101-2458 [2] LEVER  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4516 [1] SHAFT  
23. 146-0705 [10] ROD  
24. 130-3126 CY [1] VALVE GP-BANK 5 (LH)  
25. 130-3132 CY [1] VALVE GP-BANK 5 (RH)  
26. 2G-6740 [1] KNOB-RIPPER  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT  
36. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
39. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
40. 6V-8186 [10] NUT-FULL (5/16-24-THD)  
41. 6V-8188 [2] NUT (1/2-13-THD)  
42. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
43. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
45. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
46. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
47. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33280628
 

124-4200: VALVE & LINKAGE GP

124-4200 VALVE & LINKAGE GP -BANK 5 RH-BANK 7 LH-EU
S/N ASE1-UP
PART OF 187-4948 CONTROL AR-HYDRAULIC
i00123729 SEBP3328
1244200 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [12] END-ROD (5/16-24-THD)  
5. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5A. 8D-5632 [1] LEVER (BLADE LIFT)  
6. 8D-5633 [1] LEVER (SIDE SHIFT)  
6A. 8D-5633 [1] LEVER (WHEEL LEAN)  
7. 8D-5634 [1] LEVER (BLADE LIFT)  
7A. 8D-5634 [1] LEVER (CENTERSHIFT)  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [14] BEARING  
11. 8D-5641 [12] BEARING  
12. 8L-8598 [12] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER (RIPPER)  
15A. 101-2457 [1] LEVER (ARTICULATION)  
16. 101-2458 [1] LEVER (WING LIFT)  
16A. 101-2458 [1] LEVER (BLADE TIP)  
16B. 101-2458 [1] LEVER (PLOW/DOZER LIFT)  
17. 103-1597 [1] LEVER (WING TILT)  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4517 [1] SHAFT  
23. 146-0705 [12] ROD  
24. 130-3127 CY [1] VALVE GP-BANK 7 (LH)  
25. 130-3132 CY [1] VALVE GP-BANK 5 (RH)  
26. 2G-6740 [1] KNOB-RIPPER  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT  
36. 2G-7107 [1] KNOB-WING LIFT  
37. 2G-7108 [1] KNOB-WING TILT  
38. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
46. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
47. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
48. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33280629
 

144-4004: VALVE & LINKAGE GP

144-4004 VALVE & LINKAGE GP -BANK 5 RH-BANK 7 LH-WING TILT FLOAT
S/N ASE1-UP
PART OF 192-4972 CONTROL AR-HYDRAULIC
i01429152 SEBP3328
1444004 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8675 Y [1] VALVE GP-BANK 5 (RH)  
2. 4Z-6358 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 2G-7107 [1] KNOB-WING LIFT  
7. 8X-4276 [12] ROD  
  6V-8186 [24] NUT-FULL (5/16-24-THD)  
  7H-3641 [24] END-ROD (5/16-24-THD)  
8. 8D-5633 [2] LEVER  
9. 101-2458 [3] LEVER  
10. 137-4515 [2] BUSHING  
11. 8D-5640 [14] BEARING  
12. 8D-5636 B [4] SHIM (0.254-MM THK)  
13. 8D-5637 B [4] SHIM (0.762-MM THK)  
14. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
15. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
16. 3F-9556 [24] LOCKWASHER  
17. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
18. 8D-5641 [12] BEARING  
19. 2G-6757 [1] KNOB-BLADE LIFT  
20. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
21. 2G-6749 [1] KNOB-SIDESHIFT  
22. 2G-6747 [1] KNOB-BLADE TIP  
23. 8D-5632 [2] LEVER  
24. 2G-6751 [1] KNOB-CIRCLE DRIVE  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6756 [1] KNOB-WHEEL LEAN  
27. 2G-6752 [1] KNOB-ARTICULATION  
28. 2G-6755 [1] KNOB-CENTERSHIFT  
29. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
30. 9M-1853 [6] MOUNTING  
31. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
32. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
33. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
34. 104-7429 [2] PLATE  
35. 137-4516 [1] SHAFT  
36. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
42. 2G-6740 [1] KNOB-RIPPER  
43. 103-1597 [1] LEVER  
44. 2G-7108 [1] KNOB-WING TILT  
45. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
46. 8W-0456 [3] SHAFT  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 14H :

166-3334 STEERING AR-SECONDARY
SHAFT GP-PUMP DRIVE
180-3491 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
6E-4216 ROTATING GP-PUMP
ROTATING GP-PUMP
194-9453 ROTATING GP-PUMP
ROTATING GP-PUMP
189-4710 ROTATING GP-PUMP
PUMP GP-PISTON
235-4257 PUMP GP-PISTON
PUMP GP-PISTON
184-7448 PUMP GP-PISTON
PUMP GP-PISTON
177-7517 PUMP GP-PISTON
SWIVEL GP
260-6502 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
207-2409 TANK & MTG GP-HYDRAULIC
VALVE & LINKAGE GP
107-9662 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4196 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4197 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4198 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4200 VALVE & LINKAGE GP

Truck sale:

Caterpillar 14H
 
Caterpillar 14H
- motor graders
FINNING CANADA
Caterpillar 14H, motor graders, Construction
117,558 
Caterpillar 14H, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14H, motor graders, Construction
127,377 
Caterpillar 14H, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14H, motor graders, Construction
121,839 
Caterpillar 14H, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14H, motor graders, Construction
112,732 
Caterpillar 14H, motor graders, Construction
- motor graders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.