OPERATOR STATION
AIR CONDITIONER GPSEAT GP
CAB GP
OPERATOR STATION
AIR CONDITIONER GP
#SEBP33280770
167-8068: AIR CONDITIONER AR
167-8068 AIR CONDITIONER AR -SNOW
S/N ASE1-UP
PART OF 211-1770, 289-3512 CONVERSION AR-CERTIFICATION, 197-5959 SNOW AR-MOTOR GRADER
S/N ASE1-UP
PART OF 211-1770, 289-3512 CONVERSION AR-CERTIFICATION, 197-5959 SNOW AR-MOTOR GRADER
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 173-5313 Y | [1] | AIR CONDITIONER & MOUNTING GP (SNOW) | ||
| 197-4568 Y | [1] | COMPRESSOR & MTG GP-REFRIG | ||
| 197-7659 Y | [1] | CONDENSER & MTG GP-REFRIGERANT | ||
| 177-7891 Y | [1] | DUCT & CONTROL GP (A/C, HEATER DISTRIBUTOR)(HEATER, A/C SELECT) | ||
| 7I-5015 Y | [1] | DUCT GP-CAB AIR | ||
| 8X-2925 Y | [1] | FILTER GP-CAB AIR | ||
| 177-7876 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 177-7875 Y | [1] | LINES GP-HEATER | ||
| 293-9311 | [1] | PULLEY GP-IDLER | ||
| 312-8933 | [1] | BELT-SERPENTINE (AIR CONDITIONER) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33280771
174-4548: AIR CONDITIONER GP
174-4548 AIR CONDITIONER GP -SNOW
S/N ASE1-UP
PART OF 173-5313 AIR CONDITIONER & MOUNTING GP
S/N ASE1-UP
PART OF 173-5313 AIR CONDITIONER & MOUNTING GP
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-4339 | [1] | NUT-JAM (7/16-28-THD) | |
| 2. | 2V-0099 | [1] | KNOB-CONTROL (FAN SPEED) | |
| 2A. | 2V-0099 | [1] | KNOB-CONTROL (TEMPERATURE CONTROL) | |
| 3. | 3E-0400 | [2] | WHEEL AS-BLOWER | |
| (EACH INCLUDES) | ||||
| 037-4838 | [1] | CLAMP | ||
| 4. | 3E-3890 | [1] | FILM-IDENTIFICATION (FAN SPEED, TEMPERATURE)(AIR CONDITIONER, HEATER) | |
| 5. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC)(REFRIGERANT) | |
| 6. | 3S-2093 | [2] | STRAP-CABLE | |
| 7. | 3T-3197 | [1] | GROMMET | |
| 8. | 3T-3198 | [1] | GROMMET | |
| 9. | 5P-7803 | [2] | PLUG-BUTTON | |
| 10. | 6P-3236 | [1] | SWITCH AS-ROTARY (FAN SPEED) | |
| 6V-8362 | [5] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 9B-7233 | [5] | LOCKWASHER | ||
| 11. | 6T-5345 | [1] | BUSHING-TERMINAL | |
| 12. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
| 13. | 7G-4824 | [1] | STRAP | |
| 14. | 7T-9793 | [2] | VALVE-CHECK | |
| 15. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 16. | 8C-4586 | [2] | CLAMP | |
| 17. | 8D-1429 | [1] | LAMP (24-VOLT) | |
| 18. | 8E-7791 | [1] | STRAP | |
| 19. | 8P-5141 | [2] | PLATE-ORIFICE | |
| 20. | 8X-5536 | [1] | COVER | |
| 21. | 8X-5538 | [1] | COVER AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 22. | 8X-5540 | [1] | COVER | |
| 23. | 8X-7152 I | [1] | HOSE AS | |
| 24. | 8X-7153 I | [1] | HOSE AS | |
| 25. | 8Y-6388 | [4] | LOUVER AS-VENT | |
| 26. | 9G-1950 | [1] | RESISTOR | |
| 27. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 28. | 9X-2488 | [4] | CLAMP-HOSE | |
| 29. | 9X-9653 | [1] | COIL AS-EVAPORATOR | |
| 30. | 110-6393 | [1] | PLATE-INSTRUCTION (AIR CONDITIONER) | |
| 31. | 123-4618 | [1] | COVER | |
| 32. | 123-4701 | [1] | SEAL | |
| 33. | 124-1431 | [1] | BRACKET | |
| 34. | 124-1432 | [1] | HOUSING AS | |
| 7T-1099 | [1] | LINK | ||
| 8P-5141 | [2] | PLATE-ORIFICE | ||
| 35. | 124-3137 | [1] | BRACKET | |
| 36. | 124-3138 | [1] | SEAL | |
| 37. | 124-9006 | [1] | SHAFT | |
| 38. | 124-9007 | [1] | SHAFT AS | |
| 4L-5966 | [2] | SETSCREW (10-32X0.25-IN) | ||
| 39. | 125-0438 | [1] | GASKET | |
| 40. | 129-4935 | [1] | SEAL | |
| 41. | 142-4940 | [1] | PLATE AS | |
| 42. | 316-1927 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 43. | 174-4492 | [1] | COVER | |
| 44. | 174-4971 | [1] | SUPPORT AS | |
| 3E-4304 M | [6] | INSERT-THREADED (M6X1-THD) | ||
| 45. | 174-6353 | [1] | PLATE | |
| 46. | 176-5507 | [1] | PAD | |
| 47. | 177-7858 | [1] | HARNESS AS-HEATER & AIR COND | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 48. | 191-0027 | [1] | PAD | |
| 49. | 204-4376 | [1] | CAP-PROTECTIVE | |
| 50. | 238-0415 | [1] | VALVE AS-WATER | |
| 51. | 238-0417 | [1] | CORE AS-HEATER | |
| 52. | 248-6772 | [4] | SCREW-MACHINE (8-16X7.75-IN) | |
| 53. | 255-6261 | [2] | PLATE | |
| 54. | 104-2091 | [8] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 55. | 129-3178 M | [4] | LOCKNUT (M6X1-THD) | |
| 56. | 130-5300 | [1] | CLIP | |
| 57. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 58. | 3B-4501 | [2] | LOCKWASHER | |
| 59. | 3H-2900 | [1] | GROMMET | |
| 60. | 3S-9557 | [8] | SCREW-PAN HEAD (4-40X0.5-IN) | |
| 61. | 4M-6582 | [1] | SEAL-O-RING | |
| 62. | 5C-2890 M | [7] | NUT (M6X1-THD) | |
| 63. | 5P-1075 | [13] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 64. | 5P-9135 | [1] | GROMMET | |
| 65. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 66. | 6V-7728 M | [1] | BOLT (M6X1X45-MM) | |
| 67. | 6V-8801 | [13] | NUT (3/8-16-THD) | |
| 68. | 7X-0591 | [2] | WASHER-HARD (17X29X3-MM THK) | |
| 69. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 70. | 8T-4205 | [15] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 71. | 8T-6631 | [2] | SCREW-MACHINE (8-32X0.5-IN) | |
| 72. | 9M-8406 | [1] | CLIP (LOOP) | |
| 73. | 9X-2040 M | [4] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 74. | 9X-2041 M | [5] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 75. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 76. | 9X-7381 | [1] | SEAL-O-RING | |
| 77. | 9X-7382 | [1] | SEAL-O-RING | |
| 78. | 136-1953 E | HOSE (17-CM EACH) | ||
| 79. | 5P-5908 D | SEAL (0.115-M) | ||
| 80. | 5P-5637 D | SEAL (0.4-M) | ||
| 80A. | 5P-5637 D | SEAL (0.85-M) | ||
| 80B. | 5P-5637 D | SEAL (0.46-M EACH) | ||
| 80C. | 5P-5637 D | SEAL (0.13-M) | ||
| 80D. | 5P-5637 D | SEAL (0.23-M) | ||
| 80E. | 5P-5637 D | SEAL (0.94-M) | ||
| 80F. | 5P-5637 D | SEAL (0.16-M) | ||
| 81. | 9X-2126 E | SEAL (21-CM EACH) | ||
| 81A. | 9X-2126 E | SEAL (28.5-CM EACH) | ||
| 82. | 5P-6129 D | TUBE (0.87-M EACH) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP33280772
8C-9788: AIR CONDITIONER GP
8C-9788 AIR CONDITIONER GP
S/N ASE1-UP
PART OF 8W-7646 AIR CONDITIONER & MOUNTING GP
S/N ASE1-UP
PART OF 8W-7646 AIR CONDITIONER & MOUNTING GP
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-3197 | [1] | GROMMET | |
| 2. | 9X-7382 | [1] | SEAL-O-RING | |
| 3. | 3T-3198 | [1] | GROMMET | |
| 4. | 9X-7381 | [1] | SEAL-O-RING | |
| 5. | 238-0417 | [1] | CORE AS-HEATER | |
| 6. | 125-0438 | [1] | GASKET | |
| 7. | 9X-2126 BE | SEAL | ||
| 8. | 9X-9653 | [1] | COIL AS-EVAPORATOR | |
| 9. | 124-3138 | [1] | SEAL | |
| 10. | 5P-5637 BD | SEAL | ||
| 11. | 8X-5540 | [1] | COVER | |
| 12. | 124-1432 | [1] | HOUSING AS | |
| 13. | 134-8273 M | [2] | SCREW-FLAT HEAD (M10X1.5X25-MM) | |
| 14. | 8P-5141 | [2] | PLATE-ORIFICE | |
| 15. | 123-4618 | [1] | COVER | |
| 16. | 113-4251 | [1] | PLATE | |
| 17. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 18. | 5P-1075 | [13] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 19. | 5C-2890 M | [6] | NUT (M6X1-THD) | |
| 20. | 123-4701 | [1] | SEAL | |
| 21. | 106-5840 | [1] | COVER | |
| 22. | 6V-8801 | [13] | NUT (3/8-16-THD) | |
| 23. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 124-1429 | [1] | HARNESS AS-HEATER & AIR COND | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 25. | 9M-8406 | [1] | CLIP (LOOP) | |
| 26. | 8T-4205 | [16] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 9X-2041 M | [5] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 28. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC)(AIR CONDITIONER) | |
| 29. | 8T-6631 | [2] | SCREW-MACHINE (8-32X0.5-IN) | |
| 30. | 3B-4501 | [2] | LOCKWASHER | |
| 31. | 8X-7153 I | [1] | HOSE AS | |
| 32. | 8X-7152 I | [1] | HOSE AS | |
| 33. | 6P-3236 | [1] | SWITCH AS-ROTARY (FAN SPEED) | |
| 6V-8362 | [5] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 9B-7233 | [5] | LOCKWASHER | ||
| 34. | 2P-4339 | [1] | NUT-JAM (7/16-28-THD) | |
| 35. | 2V-0099 | [1] | KNOB-CONTROL (FAN SPEED) | |
| 35A. | 2V-0099 | [1] | KNOB-CONTROL (TEMPERATURE) | |
| 36. | 3E-3890 | [1] | FILM-IDENTIFICATION (FAN SPEED, TEMPERATURE)(FAN SPEED, TEMPERATURE) | |
| 37. | 8D-1429 | [1] | LAMP (24-VOLT)(FAN SPEED, TEMPERATURE) | |
| 38. | 124-9006 | [1] | SHAFT | |
| 39. | 6T-5345 | [1] | BUSHING-TERMINAL | |
| 40. | 124-9007 | [1] | SHAFT AS | |
| 4L-5966 | [2] | SETSCREW (10-32X0.25-IN) | ||
| 41. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 42. | 125-0440 | [1] | PLATE | |
| 43. | 5P-5672 BD | SEAL | ||
| 44. | 8X-5538 | [1] | COVER AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 45. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 46. | 8E-7791 | [1] | STRAP | |
| 47. | 7G-4824 | [1] | STRAP | |
| 48. | 104-2091 | [8] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 49. | 114-2702 | [1] | SUPPORT AS | |
| 3E-4304 M | [6] | INSERT-THREADED (M6X1-THD) | ||
| 5H-0255 | [1] | BOSS | ||
| 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 123-8408 | [2] | TUBE AS | ||
| 6V-9632 M | [8] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [13] | NUT-WELD (M10X1.5-THD) | ||
| 9G-9155 | [1] | CLIP | ||
| 50. | 110-6393 | [1] | PLATE-INSTRUCTION (AIR CONDITIONER) | |
| 52. | 8Y-6388 | [4] | LOUVER AS-VENT | |
| 53. | 3S-2093 | [3] | STRAP-CABLE | |
| 54. | 6V-7728 M | [1] | BOLT (M6X1X45-MM) | |
| 55. | 9G-1950 | [1] | RESISTOR | |
| 56. | 3E-0400 | [2] | WHEEL AS-BLOWER | |
| 57. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 58. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 59. | 8C-4586 | [2] | CLAMP | |
| 60. | 316-1927 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 61. | 130-5300 | [1] | CLIP | |
| 62. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 63. | 238-0415 | [1] | VALVE AS-WATER | |
| 64. | 124-1431 | [1] | BRACKET | |
| 65. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 66. | 129-4935 | [1] | SEAL | |
| 67. | 7X-0591 | [2] | WASHER-HARD (17X29X3-MM THK) | |
| 68. | 149-7798 | [1] | PLATE | |
| 69. | 5P-9135 | [1] | GROMMET | |
| 70. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 71. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 72. | 3H-2900 | [1] | GROMMET | |
| 73. | 8X-5536 | [1] | COVER | |
| 74. | 136-1953 BE | HOSE (34-CM) | ||
| 75. | 9X-2488 | [4] | CLAMP-HOSE | |
| 76. | 129-3178 M | [4] | LOCKNUT (M6X1-THD) | |
| 77. | 124-3137 | [1] | BRACKET | |
| 78. | 142-4940 | [1] | PLATE AS | |
| 79. | 5P-6129 BD | TUBE | ||
| 80. | 7T-9793 | [2] | VALVE-CHECK | |
| 81. | 5P-5908 BD | SEAL | ||
| 82. | 4M-6582 | [1] | SEAL-O-RING | |
| 83. | 248-6772 | [4] | SCREW-MACHINE (8-16X7.75-IN) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP33280773
113-4242: ARMREST GP
113-4242 ARMREST GP -LH
S/N ASE1-UP
PART OF 112-9104, 112-9105, 155-5958 SEAT GP-SUSPENSION
S/N ASE1-UP
PART OF 112-9104, 112-9105, 155-5958 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9V-7447 | [1] | PAD AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 2. | 113-4240 | [1] | BRACKET AS | |
| 3. | 7X-0456 | [1] | BOLT (7/16-14X4.5-IN) | |
| 4. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 5. | 5V-1498 | [1] | LOCKNUT (3/8-16-THD) | |
| 6. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 7. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 8. | 294-5042 | [2] | SPACER (11.1X19.5X9.67-MM THK) | |
| 9. | 2K-6061 | [1] | SCREW-MACHINE (3/8-16X1.5-IN) | |
| 10. | 8Y-6051 | [1] | SPACER (11.19X14.21X14.24-MM THK) | |
| 11. | 7X-1387 | [1] | WASHER (10.26X22.22X1.9-MM THK) |
#SEBP33280774
113-4245: ARMREST GP
113-4245 ARMREST GP -RH
S/N ASE1-UP
PART OF 112-9104, 112-9105, 155-5958 SEAT GP-SUSPENSION
S/N ASE1-UP
PART OF 112-9104, 112-9105, 155-5958 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9V-7447 | [1] | PAD AS | |
| 9F-2978 | [1] | NUT-WELD (3/8-16-THD) | ||
| 2. | 113-4243 | [1] | BRACKET AS | |
| 3. | 7X-0456 | [1] | BOLT (7/16-14X4.5-IN) | |
| 4. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 5. | 5V-1498 | [1] | LOCKNUT (3/8-16-THD) | |
| 6. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 7. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 8. | 294-5042 | [2] | SPACER (11.1X19.5X9.67-MM THK) | |
| 9. | 2K-6061 | [1] | SCREW-MACHINE (3/8-16X1.5-IN) | |
| 10. | 8Y-6051 | [1] | SPACER (11.19X14.21X14.24-MM THK) | |
| 11. | 7X-1387 | [1] | WASHER (10.26X22.22X1.9-MM THK) |
#SEBP33280775
202-7666: ARMREST GP
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-1288 | [1] | LOCKNUT-FLANGE (3/8-16-THD) | |
| 2. | 166-9914 | [1] | BRACKET AS | |
| 3. | 219-2000 | [1] | PAD AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 5. | 2K-6061 | [1] | SCREW-MACHINE (3/8-16X1.5-IN) | |
| 6. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 7. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 8. | 294-5042 | [2] | SPACER (11.1X19.5X9.67-MM THK) | |
| 9. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) |
#SEBP33280776
202-7666: ARMREST GP
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 2. | 166-9914 | [1] | BRACKET AS | |
| 3. | 219-2000 | [1] | PAD AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 5. | 3E-8042 | [1] | SCREW-BUTTON HEAD (3/8-16X1.5-IN) | |
| 6. | 294-5042 | [2] | SPACER (11.1X19.5X9.67-MM THK) | |
| 7. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) |
#SEBP33280777
202-7668: ARMREST GP
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-1288 | [1] | LOCKNUT-FLANGE (3/8-16-THD) | |
| 2. | 166-9913 | [1] | BRACKET AS | |
| 3. | 219-2000 | [1] | PAD AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 5. | 2K-6061 | [1] | SCREW-MACHINE (3/8-16X1.5-IN) | |
| 6. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 7. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 8. | 294-5042 | [2] | SPACER (11.1X19.5X9.67-MM THK) | |
| 9. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) |
#SEBP33280778
202-7668: ARMREST GP
For full view, you need register
Parts for your 14H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 2. | 166-9913 | [1] | BRACKET AS | |
| 3. | 219-2000 | [1] | PAD AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 5. | 3E-8042 | [1] | SCREW-BUTTON HEAD (3/8-16X1.5-IN) | |
| 6. | 294-5042 | [2] | SPACER (11.1X19.5X9.67-MM THK) | |
| 7. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) |
#SEBP33280779
294-5260: BRACKET GP-MOUNTING
294-5260 BRACKET GP-MOUNTING -MONITOR
S/N ASE1-UP
PART OF 294-5261 MOUNTING GP-MONITOR
S/N ASE1-UP
PART OF 294-5261 MOUNTING GP-MONITOR
For full view, you need register
Information:
OPERATOR STATION
AIR CONDITIONER GP
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
