171-1103 WIRING GP-ENGINE S/N 5ED932-UP PART OF 204-7983 ENGINE AR Type 2 16H MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 171-1103 WIRING GP-
1. 159-5867 WIRING GP-
2. 233-4648 WIRING GP-
3. 233-4648 WIRING GP-
4. 247-6436 WIRING GP-
5. 247-6436 WIRING GP-
6. 252-5709 WIRING GP-
7. 250-1919 WIRING GP-
8. 250-1930 WIRING GP-
9. 251-9569 WIRING GP-
0. INFORMATION

MOTOR GRADER 16H MOTOR GRADER ATS
16H Motor Grader ATS00001-UP (MACHINE) POWERED BY 3196 Engine SEBP3329 16H ATS (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

159-5843 WIRING GP-CONSOLE

171-1103 WIRING GP-ENGINE

159-5867 WIRING GP-FRONT

233-4648 WIRING GP-GRADE CONTROL

#SEBP33290340

171-1103: WIRING GP-ENGINE

WIRING GP-ENGINE

171-1103 WIRING GP-ENGINE
S/N 5ED932-UP
PART OF 204-7983 ENGINE AR
Type 2

i02215779 SEBP3329

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5G-4313	[1]	SPACER (10.34X15.88X12-MM THK)
2.	3E-7448	[1]	CONNECTOR
3.	3S-2093	[4]	STRAP-CABLE
4.	4P-5918	[1]	CLIP
5.	9X-0262	[1]	ADAPTER
6.	197-8391 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD)
6A.	197-8391 Y	[1]	SENSOR GP-TEMPERATURE (FUEL)
7.	197-8392 Y	[1]	SENSOR GP-TEMPERATURE (WATER, COOLANT)
8.	197-8393 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
9.	197-8394 Y	[1]	SENSOR GP-PRESSURE (FUEL)
9A.	197-8394 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL)
10.	197-8395 Y	[1]	SENSOR GP-PRESSURE (AIR INLET MANIFOLD)
11.	197-8396 Y	[1]	SENSOR GP-SPEED (CRANKSHAFT TIMING)
12.	197-8397 Y	[1]	SENSOR GP-SPEED (CAMSHAFT TIMING)
13.	164-9609	[1]	ELBOW
14.	183-4403	[1]	CLIP (LOOP)
15.	222-4086	[1]	HARNESS AS (ENGINE ELECTRONIC)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	3S-2093	[2]	STRAP-CABLE
	8T-8737	[44]	PLUG-SEAL
	9X-1386 E		SLEEVE (25-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
	126-1774	[1]	COVER-CONNECTOR
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	180-9340	[61]	SOCKET-CONNECTOR (14-GA TO 18-GA)
16.	2V-3216	[1]	CLIP
17.	3E-4353	[1]	WASHER-HARD (11X25X3-MM THK)
18.	4D-7794	[1]	CLIP
19.	132-5789	[1]	CLIP (LADDER)
20.	4P-8134	[2]	CLIP (LADDER)
21.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
22.	6V-4369	[1]	CLIP
23.	6V-5048	[2]	SEAL-O-RING
24.	6V-5049	[1]	SEAL-O-RING
25.	6V-5215 M	[2]	BOLT (M8X1.25X16-MM)
26.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
27.	6V-6317 M	[1]	BOLT (M10X1.5X20-MM)
28.	6V-7981 M	[1]	BOLT (M10X1.5X70-MM)
29.	6V-8214 M	[2]	BOLT (M6X1X20-MM)
30.	6V-8837 M	[1]	BOLT (M6X1X16-MM)
31.	7K-1181	[1]	STRAP-CABLE
32.	8J-1256	[2]	CLIP (LOOP)
33.	8M-2771	[1]	CLIP
34.	8M-2773	[1]	CLIP (LOOP)
35.	8T-0642 M	[1]	BOLT (M8X1.25X14-MM)
36.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
37.	9S-4191	[1]	PLUG (9/16-18-THD)
38.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33290341

159-5867: WIRING GP-FRONT

WIRING GP-FRONT

159-5867 WIRING GP-FRONT
S/N ATS1-UP
PART OF 162-5607 GENERAL AR

i01636371 SEBP3329

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-2342	[1]	STRAP AS-GROUND
2.	3E-2026	[1]	SWITCH AS-PRESSURE (STOP LAMP)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	3S-2093	[14]	STRAP-CABLE
4.	4S-5719	[1]	SPACER (10.31X25X12.7-MM THK)
5.	7K-1181	[5]	STRAP-CABLE
6.	9L-1566	[2]	SUPPORT
7.	9L-6331	[1]	BRACKET
8.	114-9281	[2]	SWITCH AS-PRESSURE (AIR BRAKE)
8A.	114-9281	[1]	SWITCH AS-PRESSURE (PARKING BRAKE)
			(EACH INCLUDES)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	131-4135	[1]	SWITCH AS-TEMPERATURE (HYDRAULIC OIL)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	169-5414	[5]	CLIP
11.	185-9404	[1]	HARNESS AS-PLATFORM
	127-5483	[3]	PLUG AS-CONNECTOR (1-PIN)
	155-2255	[6]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[12]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[4]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	127-5484	[3]	RECEPTACLE AS-CONNECTOR (1-PIN)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[3]	KIT-RECEPTACLE (6-PIN)
	102-8801	[8]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
12.	201-5244	[1]	PLATE AS
13.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
14.	130-5300	[8]	CLIP
15.	174-5907	[2]	CLIP (LOOP)
16.	4D-7388	[2]	CLIP (LOOP)
17.	4D-7794	[9]	CLIP
18.	4K-8864	[2]	CLIP (LOOP)
19.	4L-6454	[4]	BOLT (3/8-16X1-IN)
20.	4L-6459	[1]	BOLT (3/8-16X2.5-IN)
21.	4L-9337	[1]	BOLT (3/8-16X1.5-IN)
22.	4P-8134	[2]	CLIP (LADDER)
23.	6V-1889	[1]	CLIP (LOOP)
24.	5M-3062	[28]	BOLT (3/8-16X0.75-IN)
25.	6D-4246	[2]	CLIP (LOOP)
26.	6V-8801	[4]	NUT (3/8-16-THD)
27.	7C-4354	[1]	CLIP
28.	8M-2769	[2]	CLIP
29.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
31.	8T-4647 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
32.	8T-4896	[38]	WASHER-HARD (10.2X18.5X2.5-MM THK)
33.	9W-1991	[1]	SPACER (10.7X17.1X40-MM THK)
34.	3K-0360	[1]	SEAL-O-RING
35.	7D-7233	[2]	CLIP (LOOP)
36.	6V-3265	[2]	CLIP
37.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
38.	8T-4133 M	[2]	NUT (M10X1.5-THD)
39.	8M-2772	[1]	CLIP (LOOP)

	198-7332 FY	[1]	ELECTRONICS GP-MONITOR (CATERPILLAR MONITORING SYSTEM)
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33290342

233-4648: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

233-4648 WIRING GP-GRADE CONTROL
S/N ATS1-465
PART OF 247-6452 GRADE CONTROL AR
AN ATTACHMENT

i02224038 SEBP3329

2334648 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(IMPLEMENT ENABLE)
1A.	3E-5239	[1]	RELAY AS (24-VOLT)(POWER MODULE)
2.	3S-2093	[14]	STRAP-CABLE
3.	8T-9655	[8]	MOUNT-ISOLATION
4.	233-4626	[1]	BRACKET AS
5.	236-2354	[1]	HARNESS AS-PLATFORM
	126-1774	[2]	COVER-CONNECTOR
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	134-2540	[2]	RECEPTACLE AS-CONNECTOR
	3S-2093	[3]	STRAP-CABLE
	7K-1181	[4]	STRAP-CABLE
6.	243-3248	[1]	HARNESS AS-FRONT (BLADE)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR
	3S-2093	[1]	STRAP-CABLE
7.	244-1899	[1]	HARNESS AS-FRONT (CIRCLE)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR
	3S-2093	[1]	STRAP-CABLE
8.	244-5880	[1]	BRACKET
9.	244-5889	[1]	BRACKET AS
10.	245-7403	[1]	BRACKET AS
11.	033-8248	[3]	CLIP (LOOP)
12.	130-5300	[6]	CLIP
13.	149-7738	[1]	CLIP (LOOP)
14.	150-6256 M	[16]	BOLT-SOCKET HEAD (M3X0.5X12-MM)
15.	1K-6870	[1]	LOCKNUT (3/4-10-THD)
16.	1S-0994	[1]	CLIP (LOOP)
17.	230-7490 Y	[1]	CONTROL GP-UNPROGRAMMED (IMPLEMENT)
18.	4D-9517	[1]	CLIP
19.	4P-7581	[1]	CLIP (LADDER)
20.	5C-2890 M	[2]	NUT (M6X1-THD)
21.	5C-7261 M	[4]	NUT (M8X1.25-THD)
22.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
23.	5M-3062	[2]	BOLT (3/8-16X0.75-IN)
24.	5P-4135	[1]	BOLT (3/4-10X8-IN)
25.	5P-7970 M	[1]	NUT (M8X1.25-THD)
26.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
27.	5P-9297	[2]	CLIP (LOOP)
28.	5P-9299	[2]	CLIP (LOOP)
29.	6V-3265	[5]	CLIP
30.	6V-3940 M	[1]	BOLT (M8X1.25X25-MM)
31.	7C-4354	[17]	CLIP
32.	7X-0619	[4]	WASHER-HARD (20X30X2.5-MM THK)
33.	8M-2773	[2]	CLIP (LOOP)
34.	8T-0100 M	[4]	BOLT (M8X1.25X60-MM)
35.	8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
36.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
37.	8T-4191 M	[18]	BOLT (M10X1.5X16-MM)
38.	8T-4224	[6]	WASHER-HARD (8.8X16X2-MM THK)
39.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
40.	8T-9658	[4]	SPACER (8.2X12.7X25.4-MM THK)
41.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
42.	9M-4972	[1]	CLIP (LOOP)
43.	9M-8406	[1]	CLIP (LOOP)
44.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
45.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33290343

233-4648: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

233-4648 WIRING GP-GRADE CONTROL
S/N ATS466-UP
PART OF 247-6452 GRADE CONTROL AR
AN ATTACHMENT

i02333341 SEBP3329

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9655	[8]	MOUNT-ISOLATION
2.	9L-1566	[1]	SUPPORT
3.	132-8487 C	[4]	NUT-RING
4.	151-6187	[16]	SCREW-MACHINE (4-40X0.875-IN)
5.	169-5414	[1]	CLIP
6.	233-4626	[1]	BRACKET AS
7.	236-2354	[1]	HARNESS AS-PLATFORM
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	3S-2093	[3]	STRAP-CABLE
	7K-1181	[4]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	243-3248	[1]	HARNESS AS-FRONT (BLADE)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR
	3S-2093	[1]	STRAP-CABLE
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
9.	244-1899	[1]	HARNESS AS-FRONT (CIRCLE)
	3S-2093	[1]	STRAP-CABLE
	134-2540	[1]	RECEPTACLE AS-CONNECTOR
	155-2272	[3]	PLUG AS-CONNECTOR (4-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
10.	244-5873	[1]	WIRE AS
11.	244-5880	[1]	BRACKET
12.	244-5889	[1]	BRACKET AS
13.	245-7403	[1]	BRACKET AS
14.	260-7647 CY	[1]	APPLICATION GP-POWER TRAIN (IMPLEMENT)
15.	033-8248	[2]	CLIP (LOOP)
16.	111-4871	[1]	RELAY (24-VOLT)(IMPLEMENT)
16A.	111-4871	[1]	RELAY (24-VOLT)(POWER MODULE)
17.	130-5300 C	[3]	CLIP
18.	132-5789	[6]	CLIP (LADDER)
19.	1A-8063	[4]	BOLT (3/4-10X2.5-IN)
20.	1K-6870	[1]	LOCKNUT (3/4-10-THD)
21.	1S-0996	[1]	CLIP
22.	225-3109 M	[4]	SCREW-TRUSS HEAD (M4X0.7X14-MM)
23.	4D-7794	[1]	CLIP
24.	4P-7581	[2]	CLIP (LADDER)
25.	5C-7261 CM	[2]	NUT (M8X1.25-THD)
26.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
27.	5M-3062	[17]	BOLT (3/8-16X0.75-IN)
28.	5P-4135	[1]	BOLT (3/4-10X8-IN)
29.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
30.	5P-8247	[8]	WASHER-HARD (17X32X3.5-MM THK)
31.	5P-9299	[1]	CLIP (LOOP)
32.	5S-7379	[1]	BOLT (3/8-16X0.875-IN)
33.	6D-3479	[1]	CLIP (LOOP)
34.	6K-8179	[8]	CLIP
35.	6V-1889	[12]	CLIP (LOOP)
36.	6V-8801	[2]	NUT (3/8-16-THD)
37.	7K-1181	[23]	STRAP-CABLE
38.	7N-3718 C	[1]	CLIP
39.	7X-0325 C	[1]	BOLT (1/2-13X2.5-IN)
40.	7X-0579 C	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
41.	7X-0619	[4]	WASHER-HARD (20X30X2.5-MM THK)
42.	8M-2773	[2]	CLIP (LOOP)
43.	8T-2502	[1]	BOLT (3/8-16X1.125-IN)
44.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
45.	8T-4191 M	[4]	BOLT (M10X1.5X16-MM)
46.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
47.	8T-4896	[22]	WASHER-HARD (10.2X18.5X2.5-MM THK)
48.	8T-6869 CM	[4]	BOLT (M8X1.25X60-MM)
49.	8T-7971 C	[1]	WASHER-HARD (13.5X25.5X5-MM THK)
50.	8T-9658	[4]	SPACER (8.2X12.7X25.4-MM THK)
51.	9M-4972	[1]	CLIP (LOOP)
52.	9M-8406 C	[3]	CLIP (LOOP)
53.	9X-8256 C	[2]	WASHER (6.6X12X2-MM THK)
54.	290-4752	[1]	PLUG AS-CONNECTOR
	8T-8737	[40]	PLUG-SEAL
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33290344

247-6436: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

247-6436 WIRING GP-GRADE CONTROL
S/N ATS1-UP
PART OF 247-6452 GRADE CONTROL AR
Type 1
AN ATTACHMENT

i02224040 SEBP3329

2476436 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	125-6390	[1]	PLATE-INFORMATION (ENGINE)
3.	244-5873	[1]	WIRE AS
4.	246-1682	[1]	WIRE AS
5.	132-5789	[2]	CLIP (LADDER)
6.	3K-8106	[2]	SCREW-MACHINE (8-32X1-IN)
7.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
8.	4D-7794	[2]	CLIP
9.	5P-9297	[9]	CLIP (LOOP)
10.	6T-3644	[1]	CIRCUIT BREAKER AS (20-AMPERE)(GRADE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER

#SEBP33290345

247-6436: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

247-6436 WIRING GP-GRADE CONTROL
S/N ATS1-UP
PART OF 247-6452 GRADE CONTROL AR
Type 2
AN ATTACHMENT

i02304723 SEBP3329

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[7]	STRAP-CABLE
2.	125-6390	[1]	PLATE-INFORMATION (ENGINE)
3.	246-1682	[1]	WIRE AS
4.	132-5789	[2]	CLIP (LADDER)
5.	263-9458 C	[1]	WIRE AS
6.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
7.	4D-7794 C	[1]	CLIP
8.	6T-3644	[1]	CIRCUIT BREAKER AS (20-AMPERE)(GRADE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
9.	9M-4704 C	[2]	BOLT (8-32X1-IN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP33290346

252-5709: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

252-5709 WIRING GP-GRADE CONTROL -CAB, INDICATOR LAMP
S/N ATS1-UP
PART OF 247-6452 GRADE CONTROL AR
AN ATTACHMENT

i02472839 SEBP3329

2525709 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	115-1748	[1]	LAMP (24-VOLT, 3-WATT)
2.	247-6457	[1]	WIRING AS (GRADE CONTROL)

#SEBP33290347

250-1919: WIRING GP-MONITOR

WIRING GP-MONITOR

250-1919 WIRING GP-MONITOR
S/N ATS1-UP
PART OF 249-7783 DISPLAY AR-MONITOR
AN ATTACHMENT

i02710138 SEBP3329

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
244-1904 Y	[1]	MOUNTING GP-MONITOR (CB420 DISPLAY)
		-OR-
294-5261 Y	[1]	MOUNTING GP-MONITOR (CB420 DISPLAY)
251-9569 Y	[1]	WIRING GP-MONITOR
Y		SEPARATE ILLUSTRATION

#SEBP33290348

250-1930: WIRING GP-MONITOR

WIRING GP-MONITOR

250-1930 WIRING GP-MONITOR
S/N ATS1-UP
PART OF 249-7786 DISPLAY AR-MONITOR
AN ATTACHMENT

i02825257 SEBP3329

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
286-5697 Y	[1]	MOUNTING GP-MONITOR (CD700 DISPLAY)
244-1904 Y	[1]	MOUNTING GP-MONITOR (CB420 DISPLAY)
247-6437 Y	[1]	WIRING GP-CAB

245-7409	[1]	BRACKET AS
151-0802	[1]	KNOB
Y		SEPARATE ILLUSTRATION

#SEBP33290349

251-9569: WIRING GP-MONITOR

WIRING GP-MONITOR

251-9569 WIRING GP-MONITOR
S/N ATS1-UP
PART OF 250-1919 WIRING GP-MONITOR
AN ATTACHMENT

i02279671 SEBP3329

For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	233-3292	[1]	HARNESS AS-REAR CHASSIS
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2272	[2]	PLUG AS-CONNECTOR (4-PIN)
3.	130-5300	[1]	CLIP
4.	156-6175	[1]	CLIP (LADDER)
5.	4P-7581	[1]	CLIP (LADDER)
6.	5P-4115	[3]	WASHER-HARD (7.2X19X2-MM THK)
7.	5P-9299	[2]	CLIP (LOOP)
8.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
10.	9X-2045 M	[3]	SCREW-TRUSS HEAD (M6X1X20-MM)
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines

CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0545 FMI 06 Ether Start Relay short to ground
3176C and 3196 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines

CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Fan Reversing Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 16H :

171-1103 WIRING GP-ENGINE

159-5843 WIRING GP-CONSOLE

247-6437 WIRING GP-CAB

204-6127 WIRING GP-CAB

203-6551 WIRING GP-CAB

161-1921 WIRING GP-CAB

159-5878 WIRING GP-CAB

159-5867 WIRING GP-FRONT

233-4648 WIRING GP-GRADE CONTROL

247-6436 WIRING GP-GRADE CONTROL

252-5709 WIRING GP-GRADE CONTROL

250-1919 WIRING GP-MONITOR

250-1930 WIRING GP-MONITOR

Truck sale:

Caterpillar 16H
- motor graders
TOROMONT CAT

242,050

Caterpillar 16H, motor graders, Construction
- motor graders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

242,050

Caterpillar 16H, motor graders, Construction
- motor graders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

Caterpillar 16H, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.

801,903

Caterpillar 16H, motor graders, Construction
- motor graders
TOROMONT CAT