AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

254-0254 VALVE & LINKAGE GP -4-BANK, RH, LH S/N ATS1-UP AN ATTACHMENT 16H MOTOR GRADER


HYDRAULIC SYSTEM
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 16H MOTOR GRADER ATS
 16H Motor Grader ATS00001-UP (MACHINE) POWERED BY 3196 Engine SEBP3329 16H ATS   (2001)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0247 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0248 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0254 VALVE & LINKAGE GP
VALVE & LINKAGE GP
265-7823 VALVE & LINKAGE GP
VALVE & LINKAGE GP
265-7824 VALVE & LINKAGE GP
VALVE & LINKAGE GP
270-5006 VALVE & LINKAGE GP
 

#SEBP33290600
 

254-0254: VALVE & LINKAGE GP

254-0254 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N ATS1-UP
AN ATTACHMENT
i02252879 SEBP3329
2540254 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [16] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, LH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, RH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [10] BEARING  
10. 8D-5641 [8] BEARING  
11. 8X-4277 [8] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
12. 8X-5498 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 244-2584 [1] TUBE AS  
23. 244-2588 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 254-3375 Y [1] VALVE GP-BANK 4 (LH)  
27. 254-3378 Y [1] VALVE GP-BANK 4 (RH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 153-1818 [1] ELBOW  
30. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6747 [1] KNOB-BLADE TIP  
32. 2G-6748 [1] KNOB-BLADE LIFT  
33. 2G-6749 [1] KNOB-SIDESHIFT  
34. 2G-6751 [1] KNOB-CIRCLE DRIVE  
35. 2G-6752 [1] KNOB-ARTICULATION  
36. 2G-6755 [1] KNOB-CENTERSHIFT  
37. 2G-6756 [1] KNOB-WHEEL LEAN  
38. 2G-6757 [1] KNOB-BLADE LIFT  
39. 3J-1907 [4] SEAL-O-RING  
40. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 6V-8397 [8] SEAL-O-RING  
45. 6V-9836 [2] TEE-SWIVEL  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9041 [3] CONNECTOR  
51. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290601
 

265-7823: VALVE & LINKAGE GP

265-7823 VALVE & LINKAGE GP -5-BANK, RH; 4-BANK, LH
S/N ATS1-UP
AN ATTACHMENT
i02320460 SEBP3329
2657823 VALVE & LINKAGE GP Parts scheme 2657823 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
4A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5. 8D-5633 [1] LEVER (WHEEL LEAN)  
5A. 8D-5633 [1] LEVER (SIDESHIFT)  
6. 8D-5634 [1] LEVER (CENTERSHIFT)  
6A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [11] BEARING  
10. 8D-5641 [9] BEARING  
11. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (PLOW, DOZER)  
15A. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
22. 244-2588 [1] TUBE AS  
23. 244-2597 [1] TUBE AS  
24. 254-3379 Y [1] VALVE GP-BANK 5  
25. 263-0841 [1] TUBE AS  
26. 263-0847 [1] TUBE AS  
27. 206-5123 [4] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
28. 263-6440 Y [1] VALVE GP-BANK 4  
29. 2G-6747 [1] KNOB-BLADE TIP  
30. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
31. 2G-6749 [1] KNOB-SIDESHIFT  
32. 2G-6751 [1] KNOB-CIRCLE DRIVE  
33. 2G-6752 [1] KNOB-ARTICULATION  
34. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
35. 2G-6755 [1] KNOB-CENTERSHIFT  
36. 2G-6756 [1] KNOB-WHEEL LEAN  
37. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
38. 3J-1907 [4] SEAL-O-RING  
39. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
41. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 6V-8397 [4] SEAL-O-RING  
44. 6V-8398 [2] SEAL-O-RING  
45. 6V-8639 [2] CONNECTOR  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9041 [4] CONNECTOR  
51. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290602
 

265-7824: VALVE & LINKAGE GP

265-7824 VALVE & LINKAGE GP -5-BANK, RH; 7-BANK, LH
S/N ATS1-UP
PART OF 265-7821 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02312594 SEBP3329
2657824 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [14] BEARING  
10. 8D-5641 [12] BEARING  
11. 8X-4277 [12] ROD AS  
    (EACH INCLUDES)
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (RIPPER)  
14A. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (WING LIFT)  
15A. 101-2458 [1] LEVER (BLADE TIP)  
15B. 101-2458 [1] LEVER (PLOW, DOZER)  
16. 103-1597 [1] LEVER (WING TILT)  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4517 [1] SHAFT  
22. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
23. 244-2591 [1] TUBE AS  
24. 244-2597 [1] TUBE AS  
25. 254-3381 Y [1] VALVE GP-BANK 5  
26. 263-0845 [1] TUBE AS  
27. 263-0847 [1] TUBE AS  
28. 206-5123 [4] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
29. 263-6439 Y [1] VALVE GP-BANK 7  
30. 2G-6740 [1] KNOB-RIPPER  
31. 2G-6747 [1] KNOB-BLADE TIP  
32. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
33. 2G-6749 [1] KNOB-SIDESHIFT  
34. 2G-6751 [1] KNOB-CIRCLE DRIVE  
35. 2G-6752 [1] KNOB-ARTICULATION  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 2G-6755 [1] KNOB-CENTERSHIFT  
38. 2G-6756 [1] KNOB-WHEEL LEAN  
39. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
40. 2G-7107 [1] KNOB-WING LIFT  
41. 2G-7108 [1] KNOB-WING TILT  
42. 3J-1907 [4] SEAL-O-RING  
43. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
44. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
45. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
46. 6V-8188 [2] NUT (1/2-13-THD)  
47. 6V-8397 [4] SEAL-O-RING  
48. 6V-8398 [2] SEAL-O-RING  
49. 6V-8639 [2] CONNECTOR  
50. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
51. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
53. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
54. 8T-9041 [4] CONNECTOR  
55. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
56. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290603
 

270-5006: VALVE & LINKAGE GP

270-5006 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N ATS1-UP
AN ATTACHMENT
i02320476 SEBP3329
2705006 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [16] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
4A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5. 8D-5633 [1] LEVER (WHEEL LEAN)  
5A. 8D-5633 [1] LEVER (SIDESHIFT)  
6. 8D-5634 [1] LEVER (CENTERSHIFT)  
6A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [10] BEARING  
10. 8D-5641 [8] BEARING  
11. 8X-4277 [8] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5498 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
22. 244-2584 [1] TUBE AS  
23. 244-2588 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 254-3374 Y [1] VALVE GP-BANK 4 (RH)  
27. 153-1818 [1] ELBOW  
28. 206-5123 [4] TEE AS  
    (EACH INCLUDES)
  206-5122 [1] TEE  
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
29. 263-6440 Y [1] VALVE GP-BANK 4 (LH)  
30. 2G-6747 [1] KNOB-BLADE TIP  
31. 2G-6748 [1] KNOB-BLADE LIFT  
32. 2G-6749 [1] KNOB-SIDESHIFT  
33. 2G-6751 [1] KNOB-CIRCLE DRIVE  
34. 2G-6752 [1] KNOB-ARTICULATION  
35. 2G-6755 [1] KNOB-CENTERSHIFT  
36. 2G-6756 [1] KNOB-WHEEL LEAN  
37. 2G-6757 [1] KNOB-BLADE LIFT  
38. 3J-1907 [3] SEAL-O-RING  
39. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
41. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 6V-8397 [3] SEAL-O-RING  
44. 6V-8398 [2] SEAL-O-RING  
45. 6V-8639 [2] CONNECTOR  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9041 [3] CONNECTOR  
51. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290604
 

7I-4872: VALVE & LINKAGE GP

7I-4872 VALVE & LINKAGE GP -BANK 4-RH-BANK 5-LH
S/N ATS1-UP
PART OF 166-3405 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i06143374 SEBP3329
7I4872 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8676 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8660 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTERSHIFT)  
6. 101-2457 [1] LEVER (RIPPER)  
7. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
8. 8X-4276 [9] ROD  
  6V-8186 [18] NUT-FULL (5/16-24-THD)  
  7H-3641 [18] END-ROD (5/16-24-THD)  
9. 8D-5633 [1] LEVER (WHEEL LEAN)  
10. 101-2458 [1] LEVER (BLADE TIP)  
11. 137-4515 C [2] BUSHING  
12. 8D-5640 [11] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [18] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [9] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
21. 8T-4136 CM [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 8D-5633 [1] LEVER (SIDESHIFT)  
33. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
34. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
35. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
40. 6V-8188 [2] NUT (1/2-13-THD)  
41. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
42. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
43. 104-7429 [2] PLATE  
44. 137-4516 C [1] SHAFT  
45. 2G-6740 [1] KNOB-RIPPER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290605
 

8X-4144: VALVE & LINKAGE GP

8X-4144 VALVE & LINKAGE GP -BANK4-LH,RH
S/N ATS1-UP
PART OF 162-5607 GENERAL AR
i06143376 SEBP3329
8X4144 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8676 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8658 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (BLADE LIFT)  
6. 6V-8186 [16] NUT-FULL (5/16-24-THD)  
7. 7H-3641 [16] END-ROD (5/16-24-THD)  
  8X-4276 [8] ROD  
8. 8D-5634 [1] LEVER (CENTER SHIFT)  
9. 8D-5633 [1] LEVER (SIDE SHIFT)  
10. 101-2458 [1] LEVER (BLADE TIP)  
11. 137-4515 C [1] BUSHING  
12. 8D-5640 [10] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [16] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [8] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 CM [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 8D-5633 [1] LEVER (WHEEL LEAN)  
33. 8D-5632 [1] LEVER (BLADE LIFT)  
34. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
35. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 104-7429 [2] PLATE  
44. 137-4516 C [1] SHAFT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290606
 

104-8658: VALVE GP-BANK 4

104-8658 VALVE GP-BANK 4 -LH
S/N ATS1-UP
PART OF 8X-4144 VALVE & LINKAGE GP
i00476884 SEBP3329
1048658 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0554 Y [1] VALVE GP-CONTROL (BLADE TILT)  
6. 107-0555 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 107-0556 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 107-0558 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290607
 

104-8676: VALVE GP-BANK 4

104-8676 VALVE GP-BANK 4 -RH
S/N ATS1-UP
PART OF 7I-4872, 8X-4144 VALVE & LINKAGE GP
ALSO AN ATTACHMENT
i00476961 SEBP3329
1048676 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0560 Y [1] VALVE GP-CONTROL (ARTICULATION)(ARTICULATION)  
6. 107-0562 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 107-0563 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 107-0565 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 101-9346 [1] COVER  
11. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
12. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290608
 

130-3116: VALVE GP-BANK 4

130-3116 VALVE GP-BANK 4 -RH
S/N ATS1-UP
PART OF 121-4090, 125-2235 VALVE & LINKAGE GP
AN ATTACHMENT
i00123840 SEBP3329
1303116 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 128-8647 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33290609
 

130-3133: VALVE GP-BANK 4

130-3133 VALVE GP-BANK 4 -LH
S/N ATS1-UP
PART OF 124-4211 VALVE & LINKAGE GP
AN ATTACHMENT
i00123855 SEBP3329
1303133 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 16H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0554 Y [1] VALVE GP-CONTROL (BLADE TILT)  
6. 107-0555 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 107-0556 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 130-3115 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 16H :

VALVE & LINKAGE GP
254-0248 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0247 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0246 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0245 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0244 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0243 VALVE & LINKAGE GP
VALVE & LINKAGE GP
125-2235 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4220 VALVE & LINKAGE GP
VALVE & LINKAGE GP
265-7823 VALVE & LINKAGE GP
VALVE & LINKAGE GP
265-7824 VALVE & LINKAGE GP
VALVE & LINKAGE GP
270-5006 VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4872 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8X-4144 VALVE & LINKAGE GP
VALVE GP-BANK 4
104-8658 VALVE GP-BANK 4
VALVE GP-BANK 4
104-8676 VALVE GP-BANK 4
VALVE GP-BANK 4
130-3116 VALVE GP-BANK 4

Truck sale:

Caterpillar 16H
 
Caterpillar 16H
- motor graders
TOROMONT CAT
Caterpillar 16H, motor graders, Construction
242,050 
Caterpillar 16H, motor graders, Construction
- motor graders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 16H, motor graders, Construction
242,050 
Caterpillar 16H, motor graders, Construction
- motor graders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 16H, motor graders, Construction
 
Caterpillar 16H, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16H, motor graders, Construction
801,903 
Caterpillar 16H, motor graders, Construction
- motor graders
TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.