AVSPARE.COM
parts catalog

120H Motor Grader ALZ00001-UP (MACHINE) POWERED BY 3126B Engine POWER TRAIN Caterpillar SIS




Parts group 120H:

  For full view, you need register
POWER TRAIN

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Operation and Maintenance Manual
Axle Oscillation Bearings - Lubricate
120H and 135H Motor Graders
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
120H and 135H Motor Graders Power Train
Service Magazine
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Operation and Maintenance Manual
Braking System - Test
120H and 135H Motor Graders
Brakes, Indicators and Gauges - Test
120H and 135H Motor Graders
Parking Brake - Drain
120H and 135H Motor Graders
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Parking Brake
120H and 135H Motor Graders Air System and Brakes
Air Control Valve (Parking Brake)
120H and 135H Motor Graders Air System and Brakes
Systems Operation
Air Control Valve (Parking Brake)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Parking Brake
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Specifications
Drive Chain
120H and 135H Motor Graders Power Train
Testing and Adjusting
Drive Chain - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Drive Chain - Remove
120H and 135H Motor Graders Power Train
Drive Chain - Install
120H and 135H Motor Graders Power Train
Service Magazine
Specifications
Clutch Control (Modulation)
120H and 135H Motor Graders Power Train
Testing and Adjusting
Clutch Control - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Clutch Pedal - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Systems Operation
Differential and Bevel Gear
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Magazine
Specifications
Transmission Control Valve
120H and 135H Motor Graders Power Train
Systems Operation
Transmission Control Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Testing and Adjusting
Transmission Lubrication Oil Pressure - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Initial Pressures - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Bench Test Procedures
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Service Magazine
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Operation and Maintenance Manual
Specifications
Differential and Bevel Gear
120H and 135H Motor Graders Power Train
Differential
120H and 135H Motor Graders Power Train
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Systems Operation
Differential and Bevel Gear
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Differential and Bevel Gear - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Differential and Bevel Gear - Remove
120H and 135H Motor Graders Power Train
Differential and Bevel Gear - Disassemble
120H and 135H Motor Graders Power Train
Differential and Bevel Gear - Assemble
120H and 135H Motor Graders Power Train
Differential and Bevel Gear - Install
120H and 135H Motor Graders Power Train
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Operation and Maintenance Manual
Tandem Drive Oil Level - Check
120H and 135H Motor Graders
Tandem Drive Oil Sample - Obtain
120H and 135H Motor Graders
Tandem Drive Oil - Change
120H and 135H Motor Graders
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Disassembly and Assembly
Drive Sprocket - Remove and Install
120H and 135H Motor Graders Power Train
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Operation and Maintenance Manual
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Oil Filter - Inspect
120H and 135H Motor Graders
Technical Information Bulletin
Use Only 6 Micron Filters on the Transmissions for the Newer Motor Graders
Use Only 6 Micron Filters on the Transmissions for the Newer Motor Graders
Specifications
Bypass Switch (Power Train Oil Filter)
120H and 135H Motor Graders Power Train
Oil Filter (Power Train)
120H and 135H Motor Graders Power Train
Systems Operation
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Transmission Oil Filter Base - Remove
120H and 135H Motor Graders Power Train
Transmission Oil Filter Base - Install
120H and 135H Motor Graders Power Train
Transmission Oil Filter Base - Disassemble
120H and 135H Motor Graders Power Train
Transmission Oil Filter Base - Assemble
120H and 135H Motor Graders Power Train
Service Magazine
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Specifications
Transmission Oil Lines
120H and 135H Motor Graders Power Train
Service Magazine
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications
Gear Pump (Transmission Charging and Scavenge)
120H and 135H Motor Graders Power Train
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Pump Efficiency (Gear Pumps) - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Charging Pump Pressure - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Gear Pump (Transmission Charging and Scavenge) - Assemble
120H and 135H Motor Graders Power Train
Gear Pump (Transmission Charging and Scavenge) - Install
120H and 135H Motor Graders Power Train
Gear Pump (Transmission Charging and Scavenge) - Remove
120H and 135H Motor Graders Power Train
Operation and Maintenance Manual
Specifications
Magnetic Screen (Transmission)
120H and 135H Motor Graders Power Train
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Service Magazine
Specifications
Drive Shaft
120H and 135H Motor Graders Power Train
Drive Shaft Shield (Pump Drive Shaft)
120H and 135H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Drive Shaft - Remove and Install
120H and 135H Motor Graders Power Train
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Operation and Maintenance Manual
Tandem Drive Oil Level - Check
120H and 135H Motor Graders
Tandem Drive Oil Sample - Obtain
120H and 135H Motor Graders
Tandem Drive Oil - Change
120H and 135H Motor Graders
Tandem Breather - Clean/Replace
120H and 135H Motor Graders
Specifications
Tandem and Cover
120H and 135H Motor Graders Power Train
Systems Operation
Final Drive and Tandem Drive
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Contamination Control Guidelines
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Disassembly and Assembly
Tandem and Cover - Remove and Install
120H and 135H Motor Graders Power Train
Service Magazine
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Truck Engine News
Engine News
Special Instruction
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Contamination Control Guidelines
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Systems Operation
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Graphic Color Codes
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Operation and Maintenance Manual
Specifications
Speed Sensor (Transmission Output)
120H and 135H Motor Graders Power Train
Transmission
120H and 135H Motor Graders Power Train
Temperature Sensor (Transmission Oil)
120H and 135H Motor Graders Power Train
Speed Sensor (Transmission Input)
120H and 135H Motor Graders Power Train
Transmission Case
120H and 135H Motor Graders Power Train
Tool Operating Manual
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Transmission
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Graphic Color Codes
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Initial Pressures - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Clutch Running Clearance - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Disassembly and Assembly
Transmission - Disassemble
120H and 135H Motor Graders Power Train
Transmission - Assemble
120H and 135H Motor Graders Power Train
Transmission - Remove
120H and 135H Motor Graders Power Train
Transmission - Install
120H and 135H Motor Graders Power Train
Service Magazine
Specifications
Solenoid Valve (Differential Lock)
120H and 135H Motor Graders Power Train
Systems Operation
Differential and Bevel Gear
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Testing and Adjusting
Differential Lock Pressure - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Differential Lock Valve - Remove and Install
120H and 135H Motor Graders Power Train
Truck Engine News
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Bench Test Procedures
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Service Magazine
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Specifications
Solenoid Valve (Transmission Clutch)
120H and 135H Motor Graders Power Train
Solenoid Valve (Transmission Clutch)
120H and 135H Motor Graders Power Train
Selector and Pressure Control Valve
120H and 135H Motor Graders Power Train
Selector and Pressure Control Valve
120H and 135H Motor Graders Power Train
Testing and Adjusting
Engagement Pressure for the Transmission Clutch - Calibrate
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Fill Time for the Transmission Clutch - Calibrate
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Lubrication Oil Pressure - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Initial Pressures - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Troubleshooting
MID 081 - CID 1401 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 13
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 13
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 13
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Magazine
Specifications
Solenoid Valve (Transmission Clutch)
120H and 135H Motor Graders Power Train
Solenoid Valve (Transmission Clutch)
120H and 135H Motor Graders Power Train
Solenoid Valve (Differential Lock)
120H and 135H Motor Graders Power Train
Selector and Pressure Control Valve
120H and 135H Motor Graders Power Train
Selector and Pressure Control Valve
120H and 135H Motor Graders Power Train
Troubleshooting
MID 081 - CID 1404 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1404 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1404 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0688 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Magazine
Specifications
Transmission Control Valve
120H and 135H Motor Graders Power Train
Solenoid Valve (Transmission Clutch)
120H and 135H Motor Graders Power Train
Solenoid Valve (Transmission Clutch)
120H and 135H Motor Graders Power Train
Systems Operation
Transmission Control Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Bench Test Procedures
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Disassembly and Assembly
Transmission Control Valve - Disassemble
120H and 135H Motor Graders Power Train
Transmission Control Valve - Assemble
120H and 135H Motor Graders Power Train
Transmission Control Valve - Remove
120H and 135H Motor Graders Power Train
Transmission Control Valve - Install
120H and 135H Motor Graders Power Train
Service Magazine
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Operation and Maintenance Manual
Tire Inflation Pressure Adjustment
120H and 135H Motor Graders
Tire Inflation with Nitrogen
120H and 135H Motor Graders
Tire Inflation - Check
120H and 135H Motor Graders
Tire Shipping Pressure
120H and 135H Motor Graders
Wheel Bearing Oil (Front) - Change
120H and 135H Motor Graders
Wheel Bearing Oil Level (Front) - Check
120H and 135H Motor Graders
Special Instruction
Reuse Guidelines for Wheels that are used on certain Motor Graders{4201}
Reuse Guidelines for Wheels that are used on certain Motor Graders{4201}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Wheel Group
120H and 135H Motor Graders Power Train
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Disassembly and Assembly
Wheel and Tire (Rear) - Remove and Install
120H and 135H Motor Graders Power Train
Wheel and Tire (Front) - Remove and Install
120H and 135H Motor Graders Power Train
Service Magazine
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Final Drive Preload - Check
120H and 135H Motor Graders
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Final Drive
120H and 135H Motor Graders Power Train
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Final Drive and Tandem Drive
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Final Drive Bearings - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Final Drive - Assemble
120H and 135H Motor Graders Power Train
Final Drive - Remove
120H and 135H Motor Graders Power Train
Drive Sprocket - Remove and Install
120H and 135H Motor Graders Power Train
Final Drive - Disassemble
120H and 135H Motor Graders Power Train
Final Drive - Install
120H and 135H Motor Graders Power Train
Service Magazine
The Purpose of the Vent Hole on the Final Drive for Certain H, K, M, M Series 2, and M Series 3 Motor Graders {4050}
The Purpose of the Vent Hole on the Final Drive for Certain H, K, M, M Series 2, and M Series 3 Motor Graders {4050}

Truck sale:

 
Caterpillar 120H
- motor graders
CAVPOWER
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.