AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

160-2196 TRANSMISSION AR S/N EDB4459-7992 PART OF 162-5603 GENERAL AR 120H MOTOR GRADER


POWER TRAIN
TRANSMISSION GP
SHAFT GP
VALVE & MTG GP
VALVE GP-SELECTOR & PRESS CONT
ELECTRICAL AND STARTING SYSTEM
VALVE GP

MOTOR GRADER 120H MOTOR GRADER ALZ
 120H Motor Grader ALZ00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3330 120H ALZ   (2000)

POWER TRAIN

TRANSMISSION GP
SHAFT GP-INPUT
176-6465 SHAFT GP-INPUT
TRANSMISSION AR
160-2196 TRANSMISSION AR
TRANSMISSION AR
160-2196 TRANSMISSION AR
TRANSMISSION AR
160-2196 TRANSMISSION AR
 

#SEBP33300440
 

160-2196: TRANSMISSION AR

160-2196 TRANSMISSION AR
S/N EDB4459-7992
PART OF 162-5603 GENERAL AR
i02438129 SEBP3330
1602196 TRANSMISSION AR Parts scheme 1602196 TRANSMISSION AR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-6465 Y [1] SHAFT GP-INPUT  
2. Y [1] CLUTCH GP-TRANSMISSION (FORWARD)  
3. Y [1] CLUTCH GP-TRANSMISSION (REVERSE, SECOND)  
4. 6Y-2303 Y [1] CLUTCH GP-TRANSMISSION (FIRST, THIRD)  
5. 8E-9316 Y [1] CLUTCH GP-TRANSMISSION (HIGH, LOW)  
6. 180-9146 Y [1] CASE & PARTS GP-TRANSMISSION  
7. 9W-5132 Y [1] BRAKE GP-PARKING  
8. 9W-5134 Y [1] SCREEN GP-MAGNETIC (TRANSMISSION)  
9. 6Y-8765 Y [1] PUMP GP-GEAR (TRANSMISSION)  
10. 281-3165 CY [1] CONTROL GP-TRANSMISSION HYD  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP33300441
 

160-2196: TRANSMISSION AR

160-2196 TRANSMISSION AR
S/N EDB7993-UP
PART OF 162-5603 GENERAL AR
i02854693 SEBP3330
1602196 TRANSMISSION AR Parts scheme 1602196 TRANSMISSION AR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-6465 Y [1] SHAFT GP-INPUT  
2. 235-2412 CY [1] CLUTCH GP-TRANSMISSION (FORWARD)  
3. 235-2413 CY [1] CLUTCH GP-TRANSMISSION (REVERSE, 2ND)  
4. 6Y-2303 Y [1] CLUTCH GP-TRANSMISSION (FIRST, THIRD)  
5. 8E-9316 Y [1] CLUTCH GP-TRANSMISSION (HIGH, LOW)  
6. 180-9146 Y [1] CASE & PARTS GP-TRANSMISSION  
7. 9W-5132 Y [1] BRAKE GP-PARKING  
8. 9W-5134 Y [1] SCREEN GP-MAGNETIC (TRANSMISSION)  
9. 6Y-8765 Y [1] PUMP GP-GEAR (TRANSMISSION)  
10. 281-3165 Y [1] CONTROL GP-TRANSMISSION HYD  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP33300442
 

8X-5006: UNIVERSAL JOINT GP

8X-5006 UNIVERSAL JOINT GP
S/N ALZ1-UP
PART OF 8W-5621 SHAFT GP-DRIVE
i00122737 SEBP3330
8X5006 UNIVERSAL JOINT GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5044 [1] PLATE-COUPLING  
2. 9P-0356 [2] SPIDER & BEARING AS  
3. 0S-1579 [8] BOLT (1/2-20X2-IN)  
 

#SEBP33300443
 

174-3705: VALVE & MTG GP-DIFF LOCK

174-3705 VALVE & MTG GP-DIFF LOCK
S/N ALZ1-UP
PART OF 173-5305 CONTROL GP-DIFFERENTIAL LOCK
i01506206 SEBP3330
1743705 VALVE & MTG GP-DIFF LOCK Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-5979 [1] KIT-SEAL (DIFFERENTIAL LOCK)  
    (INCLUDES O-RINGS)
2. 154-3064 Y [1] VALVE GP-SOLENOID (DIFFERENTIAL LOCK)  
3. 148-2516 [1] MANIFOLD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33300444
 

184-1130: VALVE GP-SELECTOR & PRESS CONT

184-1130 VALVE GP-SELECTOR & PRESS CONT -DIRECTION & RANGE
S/N EDB1-UP; BJN1-99999
PART OF 179-6063, 281-3163 VALVE GP-TRANSMISSION CONTROL
i01493608 SEBP3330
1841130 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6309 [1] BODY  
2. 6V-5683 M [5] BOLT (M6X1X16-MM)  
4. 3D-4245 [1] SEAL-O-RING  
6. 8E-9894 [1] SPOOL  
7. 9U-8068 [1] SLUG  
8. 9U-9282 [1] SPRING (OUTER)  
9. 9U-9316 [1] SPRING (INNER)  
10. 108-6523 [1] ADJUSTER AS  
  4K-2039 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  9U-8069 [1] PLUG  
  095-1207 M [1] NUT (M12X1.75-THD)  
  101-9754 [1] SCREW-ADJUSTMENT (M12X1.75X18-MM)  
11. 309-1877 [1] ORIFICE AS  
  5F-9144 [1] SEAL-O-RING  
  9U-8620 [1] ORIFICE  
12. 9U-8067 [1] RETAINER  
13. 8E-9895 [1] PISTON-LOAD  
14. 9W-7412 [1] SPRING (OUTER)  
15. 4J-2506 [1] SEAL-O-RING  
16. 6F-4855 [1] SEAL-O-RING  
17. 5J-1036 B [4] SHIM (0.8-MM THK)  
18. 8E-9896 [1] PISTON-SELECTOR  
19. 179-1298 [3] SPACER  
20. 7T-0570 [1] SPRING (INNER)  
21. 4M-1751 B [2] SPACER (15.09X0.4-MM THK)  
23. 186-1526 Y [1] VALVE GP-SOLENOID (24-VOLT)(SELECTOR & PRESSURE RANGE)  
25. 309-2995 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9G-7132 [1] PLUG-ORIFICE  
26. 162-0177 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
28. 180-9327 [1] MANIFOLD  
30. 3K-6116 [1] WASHER (0.266X0.47X0.031-IN THK)  
31. 8T-8442 M [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
32. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 9X-7384 [3] SEAL-O-RING  
34. 175-3893 [1] VALVE GP-SOLENOID  
34A. 175-3893 [1] VALVE GP-SOLENOID  
34B. 175-3893 [1] VALVE GP-SOLENOID  
    (EACH VALVE GP INCLUDES)
  323-9531 [1] COIL AS (24-VOLT)  
  164-2108 [1] WASHER (13.03X25.4X2.38-MM THK)  
  218-2373 [1] NUT (1/2-28-THD)  
  238-5080 [1] SEAL-O-RING  
  317-0810 [1] SEAL-O-RING  
35. 183-6774 [1] PLATE  
36. 8C-6965 M [1] BOLT-SOCKET HEAD (M6X1X45-MM)  
37. 154-7172 [1] SPOOL  
38. 309-2996 [5] PLUG AS  
    (EACH INCLUDES)
  6Y-4638 [1] PLUG-HEX SOCKET (1-5/16-12-THD)  
  7M-8485 [1] SEAL-O-RING  
39. 183-6775 [3] SPOOL AS  
    (EACH INCLUDES)
  167-0566 [1] CARTRIDGE  
40. 154-7175 [3] SLUG  
41. 154-7176 [3] SPRING (INNER)  
42. 154-7177 [3] SPRING (OUTER)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33300445
 

184-1132: VALVE GP-SELECTOR & PRESS CONT

184-1132 VALVE GP-SELECTOR & PRESS CONT
S/N EDB1-4458; BJN1-99999
PART OF 179-6063 VALVE GP-TRANSMISSION CONTROL
i01506988 SEBP3330
1841132 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-7055 [1] BODY  
2. 8E-7714 [2] ORIFICE  
3. 5F-9144 [4] SEAL-O-RING  
4. 8E-9894 [4] SPOOL  
5. 9U-8068 [4] SLUG  
6. 9U-9316 [4] SPRING (INNER)  
7. 9U-9282 [4] SPRING (OUTER)  
8. 7M-8485 [1] SEAL-O-RING  
9. 9U-8067 [4] RETAINER  
10. 8E-9895 [4] PISTON-LOAD  
11. 4J-2506 [1] SEAL-O-RING  
12. 6F-4855 [4] SEAL-O-RING  
13. 8E-9896 [4] PISTON-SELECTOR  
14. 4M-1751 B [3] SPACER (15.09X0.4-MM THK)  
15. 5J-1036 B [14] SHIM (0.8-MM THK)  
16. 3D-4245 [4] SEAL-O-RING  
17. 9W-7410 [2] SPRING (OUTER)  
18. 7T-0570 [2] SPRING (INNER)  
19. 8E-1143 [1] SLUG  
20. 9U-8668 [1] SPOOL AS  
  3D-8317 [1] RING-RETAINING  
  4B-9880 [1] BALL  
  4M-2381 [1] SPRING  
  8E-9893 [1] SPOOL-RELIEF  
  9U-8669 [1] RETAINER  
21. 9U-9595 [1] SPRING  
22. 9N-4500 [1] SPRING (OUTER)  
23. 9N-4498 [1] SPRING (INNER)  
24. 8E-9897 [1] SPOOL  
25. 9W-0898 [1] SLUG  
26. 4J-7533 [4] SEAL-O-RING  
27. 8E-6570 [1] MANIFOLD  
28. 186-1526 Y [4] VALVE GP-SOLENOID (24-VOLT)(SELECTOR & PRESSURE RANGE)  
31. 8C-6965 M [4] BOLT-SOCKET HEAD (M6X1X45-MM)  
32. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 8T-8442 M [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
34. 9U-8620 [1] ORIFICE (SILVER)  
35. 9G-7132 [4] PLUG-ORIFICE (GREEN)  
36. 3J-7354 [1] SEAL-O-RING  
37. 9S-8002 [1] PLUG (7/16-20-THD)  
38. 9S-8004 [1] PLUG (9/16-18-THD)  
39. 3J-1907 [1] SEAL-O-RING  
40. 108-6523 [5] ADJUSTER AS  
    (EACH INCLUDES)
  4K-2039 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  9U-8069 [1] PLUG  
  095-1207 M [1] NUT (M12X1.75-THD)  
  101-9754 [1] SCREW-ADJUSTMENT (M12X1.75X18-MM)  
41. 6Y-4638 [1] PLUG-HEX SOCKET (1-5/16-12-THD)  
42. 8E-7713 [1] ORIFICE  
43. 9W-7412 [2] SPRING (OUTER)  
44. 7G-5453 [1] SPRING (INNER)  
45. 108-3129 [1] STOP  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33300446
 

281-3160: VALVE GP-SELECTOR & PRESS CONT

281-3160 VALVE GP-SELECTOR & PRESS CONT
S/N EDB4459-UP
PART OF 281-3163 VALVE GP-TRANSMISSION CONTROL
i02438188 SEBP3330
2813160 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-7055 [1] BODY  
2. 309-1876 [2] ORIFICE AS  
    (EACH INCLUDES)
  5F-9144 [1] SEAL-O-RING  
  8E-7714 [1] ORIFICE  
4. 8E-9894 [4] SPOOL  
5. 9U-8068 [4] SLUG  
6. 9U-9316 [4] SPRING  
7. 9U-9282 [4] SPRING  
9. 9U-8067 [4] RETAINER  
10. 8E-9895 [4] PISTON-LOAD  
11. 4J-2506 [1] SEAL-O-RING  
12. 6F-4855 [4] SEAL-O-RING  
13. 8E-9896 [4] PISTON-SELECTOR  
14. 4M-1751 B [4] SPACER (15.09X0.4-MM THK)  
15. 5J-1036 B [15] SHIM (0.8-MM THK)  
16. 3D-4245 [4] SEAL-O-RING  
17. 9W-7410 [1] SPRING  
18. 7T-0570 [3] SPRING  
19. 8E-1143 [1] SLUG  
20. 9U-8668 [1] SPOOL AS  
  3D-8317 [1] RING-RETAINING  
  4B-9880 [1] BALL  
  4M-2381 [1] SPRING  
  8E-9893 [1] SPOOL-RELIEF  
  9U-8669 [1] RETAINER  
21. 9U-9595 [1] SPRING  
22. 9N-4500 [1] SPRING  
23. 9N-4498 [1] SPRING  
24. 8E-9897 [1] SPOOL  
25. 9W-0898 [1] SLUG  
27. 8E-6570 [1] MANIFOLD  
28. 186-1526 Y [4] VALVE GP-SOLENOID (24-VOLT)(SPEED, RANGE, TRANSMISSION)  
31. 8C-6965 M [4] BOLT-SOCKET HEAD (M6X1X45-MM)  
32. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 8T-8442 M [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
34. 309-1877 [1] ORIFICE AS  
  5F-9144 [1] SEAL-O-RING  
  9U-8620 [1] ORIFICE  
35. 309-2995 [4] PLUG AS  
    (EACH INCLUDES)
  4J-7533 [1] SEAL-O-RING  
  9G-7132 [1] PLUG-ORIFICE  
37. 183-7263 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  9S-8002 [1] PLUG (7/16-20-THD)  
38. 162-0177 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
40. 108-6523 [5] ADJUSTER AS  
    (EACH INCLUDES)
  4K-2039 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  9U-8069 [1] PLUG  
  095-1207 M [1] NUT (M12X1.75-THD)  
  101-9754 [1] SCREW-ADJUSTMENT (M12X1.75X18-MM)  
41. 309-2996 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  6Y-4638 [1] PLUG-HEX SOCKET (1-5/16-12-THD)  
42. 309-1878 [1] ORIFICE AS  
  5F-9144 [1] SEAL-O-RING  
  8E-7713 [1] ORIFICE  
43. 9W-7412 [3] SPRING  
44. 7G-5453 [1] SPRING  
45. 108-3129 [1] STOP  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33300447
 

154-3064: VALVE GP-SOLENOID

154-3064 VALVE GP-SOLENOID
S/N ALZ1-UP
24-VOLT
PART OF 174-3705 VALVE & MTG GP-DIFF LOCK
FIELD REPLACEMENT FOR 144-6294 VALVE GP-SOLENOID
i01510427 SEBP3330
1543064 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-9987 [1] WASHER (8.3X28X2.5-MM THK)  
2. 111-0343 [1] LOCKNUT (5/16-18-THD)  
3. 142-0350 [1] CARTRIDGE AS  
  8C-9987 [1] WASHER (8.3X28X2.5-MM THK)  
  111-0343 [1] LOCKNUT (5/16-18-THD)  
4. 218-9894 [1] COIL AS (24-VOLT)  
  1S-9593 [2] STRAP-CABLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
   
    AVAILABLE REPAIR KIT(S):
  6G-5979 [1] KIT-SEAL (DIFFERENTIAL LOCK VALVE)  
    (INCLUDES 0-RING SEALS)
 

#SEBP33300448
 

186-1526: VALVE GP-SOLENOID

186-1526 VALVE GP-SOLENOID
S/N EDB1-UP; BJN1-99999
24-VOLT
PART OF 184-1130, 184-1132, 281-3160 VALVE GP-SELECTOR & PRESS CONT
i01436251 SEBP3330
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  396-7070 Y [1] VALVE GP-SOLENOID (12-VDC)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33300449
 

396-7070: VALVE GP-SOLENOID

396-7070 VALVE GP-SOLENOID -12-VDC
S/N EDB1-UP; BJN1-99999
PART OF 186-1526 VALVE GP-SOLENOID
FIELD REPLACEMENT ORDER @@@@@186-1526@@@@@
i06301375 SEBP3330
3967070 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 301-3118 [1] COIL AS  
2. 443-1076 [1] NUT (9/16-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  7T-4515 [1] KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES SEALS)
 

Information:

Operation and Maintenance Manual
Transmission and Differential Oil - Change
120H and 135H Motor Graders
Transmission and Differential Oil Level - Check
120H and 135H Motor Graders
Transmission and Differential Oil Sample - Obtain
120H and 135H Motor Graders
Specifications
Speed Sensor (Transmission Output)
120H and 135H Motor Graders Power Train
Transmission
120H and 135H Motor Graders Power Train
Temperature Sensor (Transmission Oil)
120H and 135H Motor Graders Power Train
Speed Sensor (Transmission Input)
120H and 135H Motor Graders Power Train
Transmission Case
120H and 135H Motor Graders Power Train
Tool Operating Manual
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Transmission
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Graphic Color Codes
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Initial Pressures - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Clutch Running Clearance - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
Disassembly and Assembly
Transmission - Disassemble
120H and 135H Motor Graders Power Train
Transmission - Assemble
120H and 135H Motor Graders Power Train
Transmission - Remove
120H and 135H Motor Graders Power Train
Transmission - Install
120H and 135H Motor Graders Power Train
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
A New Process for Checking Seal Ring Carrier to Clutch Shaft Clearance {3063, 3155, 3170}
2007/11/19
Procedure for Cleaning the Power Train {3065, 3139}
2014/03/21
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 120H :

TRANSMISSION AR
160-2196 TRANSMISSION AR
250-2180 TIRE & RIM AR
TANDEM & COVER GP
193-1721 TANDEM & COVER GP
TANDEM & COVER GP
193-1721 TANDEM & COVER GP
SHAFT GP-INPUT
176-6465 SHAFT GP-INPUT
SHAFT GP-DRIVE
8W-5621 SHAFT GP-DRIVE
SHAFT GP-DRIVE
8W-5621 SHAFT GP-DRIVE
SCREEN GP-MAGNETIC
9W-5134 SCREEN GP-MAGNETIC
TRANSMISSION AR
160-2196 TRANSMISSION AR
UNIVERSAL JOINT GP
8X-5006 UNIVERSAL JOINT GP
VALVE & MTG GP-DIFF LOCK
174-3705 VALVE & MTG GP-DIFF LOCK
VALVE GP-SELECTOR & PRESS CONT
184-1130 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
184-1132 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
281-3160 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SOLENOID
154-3064 VALVE GP-SOLENOID
186-1526 VALVE GP-SOLENOID

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.