112-7463 CYLINDER & MTG GP-SIDESHIFT S/N ALZ1-UP PART OF 162-5603 GENERAL AR 120H MOTOR GRADER

HYDRAULIC SYSTEM

CYLINDER GP

0. 112-7463 CYLINDER &
1. 8W-2290 CYLINDER &
2. 8W-2737 CYLINDER &
3. 198-8305 CYLINDER G
4. 131-7191 CYLINDER G
5. 6E-1754 CYLINDER G
6. 6E-4724 CYLINDER G
7. 132-4926 CYLINDER G
8. 165-2510 CYLINDER G
9. 165-2510 CYLINDER G
0. INFORMATION

MOTOR GRADER 120H MOTOR GRADER ALZ
120H Motor Grader ALZ00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3330 120H ALZ (2000)

HYDRAULIC SYSTEM

CYLINDER GP

8X-1946 CYLINDER & MTG GP-CENTERSHIFT

8W-2913 CYLINDER & MTG GP-SCARIFIER

112-7463 CYLINDER & MTG GP-SIDESHIFT

8W-2290 CYLINDER & MTG GP-STEERING

8W-2737 CYLINDER & MTG GP-WHEEL LEAN

198-8305 CYLINDER GP-ARTICULATION

#SEBP33300760

112-7463: CYLINDER & MTG GP-SIDESHIFT

CYLINDER & MTG GP-SIDESHIFT

112-7463 CYLINDER & MTG GP-SIDESHIFT
S/N ALZ1-UP
PART OF 162-5603 GENERAL AR

i00123265 SEBP3330

1127463 CYLINDER & MTG GP-SIDESHIFT Parts scheme

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6H-0211	[2]	WASHER (1.563X2.75X0.06-IN THK)
2.	5T-5295	[1]	PIN
3.	1B-2886	[1]	BOLT (1/2-13X3.75-IN)
5.	1K-6872	[1]	LOCKNUT (1/2-13-THD)
6.	3B-4647	[1]	PIN-COTTER
7.	5T-8417	[1]	PIN
8.	112-7462	[1]	BRACKET
9.	2A-1538	[4]	BOLT (3/4-10X2.25-IN)
10.	5P-8248	[4]	WASHER-HARD (20X36.5X3.5-MM THK)
11.	112-5575 Y	[1]	CYLINDER GP-SIDESHIFT
	Y		SEPARATE ILLUSTRATION

#SEBP33300761

8W-2290: CYLINDER & MTG GP-STEERING

CYLINDER & MTG GP-STEERING

8W-2290 CYLINDER & MTG GP-STEERING
S/N ALZ1-UP
PART OF 162-5603 GENERAL AR

i01432856 SEBP3330

8W2290 CYLINDER & MTG GP-STEERING Parts scheme

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2H-3786	[2]	NUT-JAM (1-14-THD)
2.	8D-2429	[2]	PIN AS
			(EACH INCLUDES)
	8D-2428	[1]	PLATE
3.	8D-2638	[4]	SPACER (1.016X1.25X0.39-IN THK)
4.	130-9041 CY	[1]	CYLINDER GP-STEERING (LH)
5.	130-9042 CY	[1]	CYLINDER GP-STEERING (RH)
6.	131-3736	[2]	TIE ROD GP
			(EACH INCLUDES)
	2F-8057	[1]	NUT-SLOTTED
	132-1143	[1]	SEAL-BOOT
7.	3B-4618	[2]	PIN-COTTER
8.	5S-7379	[2]	BOLT (3/8-16X0.875-IN)
9.	8D-2811	[2]	WASHER (1.25X1.94X0.032-IN THK)
10.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP33300762

8W-2737: CYLINDER & MTG GP-WHEEL LEAN

CYLINDER & MTG GP-WHEEL LEAN

8W-2737 CYLINDER & MTG GP-WHEEL LEAN
S/N ALZ1-UP
PART OF 162-5603 GENERAL AR

i00122489 SEBP3330

8W2737 CYLINDER & MTG GP-WHEEL LEAN Parts scheme

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6H-1717	[2]	BOLT (1/2-13X1.125-IN)
	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
2.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)(WHEEL LEAN)
3.	2G-8609	[1]	PIN
4.	6G-7187	[1]	LOCK
5.	121-9242 Y	[1]	CYLINDER GP-WHEEL LEAN
6.	2G-5667	[1]	RETAINER
7.	0S-1592	[1]	BOLT (5/8-11X1.25-IN)
	4D-3704	[1]	WASHER-HARD (17X30X5-MM THK)
8.	433-7105	[4]	SEAL-PIN
	Y		SEPARATE ILLUSTRATION

#SEBP33300763

198-8305: CYLINDER GP-ARTICULATION

CYLINDER GP-ARTICULATION

198-8305 CYLINDER GP-ARTICULATION
S/N ALZ1-UP
76.2MM BORE X 284.3MM STROKE
PART OF 193-1475 CYLINDER & MTG GP-ARTICULATION

i01821071 SEBP3330

1988305 CYLINDER GP-ARTICULATION Parts scheme

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-4090	[1]	PISTON
2.	9T-2446	[1]	CYLINDER AS
3.	184-9843	[1]	HEAD
4.	198-8306	[1]	ROD AS
5.	167-2190	[1]	SEAL AS-BUFFER
6.	351-8628	[1]	SEAL-U-CUP
7.	308-1880	[1]	SEAL-WIPER
8.	173-9779 M	[1]	BOLT (M24X3X80-MM)
9.	175-7896	[1]	SEAL-O-RING
10.	4T-6907	[1]	RING-WEAR
11.	6J-1972	[1]	SEAL AS
12.	6J-5731	[1]	RING-BACKUP
13.	6J-5733	[1]	RING-WEAR
14.	6V-8237	[1]	WASHER (26X44X4-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP33300764

131-7191: CYLINDER GP-BLADE TIP

CYLINDER GP-BLADE TIP

131-7191 CYLINDER GP-BLADE TIP
S/N ALZ1-UP
69.85-MM (2.75-IN)BORE X 307.00-MM (12.09-IN) STROKE
PART OF 8X-1943 CYLINDER & MTG GP-BLADE TIP

i00995297 SEBP3330

1317191 CYLINDER GP-BLADE TIP Parts scheme

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-7194	[1]	CYLINDER AS
	2D-8652	[1]	BEARING
2.	178-2991 M	[1]	BOLT-SELF-LOCKING (M20X2.5X70-MM)
3.	8T-3282	[1]	WASHER-HARD (22X35X3.5-MM THK)
4.	5J-7010 J	[1]	SEAL AS
5.	8J-0112 J	[1]	RING-WEAR
6.	9T-2457	[1]	PISTON
7.	175-7895 J	[1]	SEAL-O-RING
8.	4J-9225 J	[1]	RING-BACKUP
9.	6E-4940	[1]	HEAD
10.	131-7195	[1]	ROD AS
	2D-8652	[1]	BEARING
11.	4T-6780 J	[1]	RING-WEAR
12.	167-2186 J	[1]	SEAL AS-BUFFER
13.	167-2294 J	[1]	SEAL-U-CUP
14.	226-8202 J	[1]	SEAL-WIPER

			AVAILABLE REPAIR KIT(S):
	233-9204 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	472-8025	[1]	KIT-HYDRAULIC CYLINDER SEAL
			(INCLUDES RINGS & SEALS)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP33300765

6E-1754: CYLINDER GP-CENTERSHIFT

CYLINDER GP-CENTERSHIFT

6E-1754 CYLINDER GP-CENTERSHIFT
S/N ALZ1-UP
76.2 MM BORE X 590.0 MM STROKE
PART OF 8X-1946 CYLINDER & MTG GP-CENTERSHIFT

i00122156 SEBP3330

6E1754 CYLINDER GP-CENTERSHIFT Parts scheme

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-1634	[1]	CYLINDER AS
2.	173-9683 M	[1]	BOLT (M30X3.5X90-MM)
3.	3S-7023	[1]	WASHER (34X57X6-MM THK)
4.	6E-1131	[1]	PISTON
5.	6E-1857	[1]	ROD AS
6.	175-7896 J	[1]	SEAL-O-RING
7.	6J-5731 J	[1]	RING-BACKUP
8.	148-2593	[1]	HEAD
9.	6J-5733 J	[1]	RING-WEAR
10.	6J-1972 J	[1]	SEAL AS
11.	308-1845 J	[1]	SEAL-WIPER
12.	289-2946 J	[1]	SEAL-U-CUP
13.	289-2935 J	[1]	SEAL AS-BUFFER
14.	4T-5613 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	238-4462 J	[1]	KIT-SEAL
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART

#SEBP33300766

6E-4724: CYLINDER GP-HYDRAULIC

CYLINDER GP-HYDRAULIC

6E-4724 CYLINDER GP-HYDRAULIC -RIPPER
S/N ALZ1-UP
88.9-MM (3.5-IN) BORE X 329.3-MM (12.96-IN) STROKE
PART OF 208-9698 CYLINDER & LINES GP-RIPPER
AN ATTACHMENT

i00122177 SEBP3330

6E4724 CYLINDER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-4725	[1]	CYLINDER AS
2.	173-9683 M	[1]	BOLT (M30X3.5X90-MM)
3.	3S-7023	[1]	WASHER (34X57X6-MM THK)
4.	6E-4581	[1]	PISTON
5.	4T-8054 J	[1]	SEAL AS
6.	7J-9885 J	[1]	RING-WEAR
7.	4T-5613 J	[1]	RING-WEAR
8.	289-2935	[1]	SEAL AS-BUFFER
9.	167-2304 J	[1]	SEAL-U-CUP
10.	308-1845	[1]	SEAL-WIPER
11.	6E-2447	[1]	ROD AS
12.	6E-4974	[1]	HEAD
13.	175-7898 J	[1]	SEAL-O-RING
14.	4J-9224 J	[1]	RING-BACKUP

			AVAILABLE REPAIR KIT(S):
	376-9011 J	[1]	KIT-HYD CYLINDER SEAL
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP33300767

132-4926: CYLINDER GP-LIFT

CYLINDER GP-LIFT

132-4926 CYLINDER GP-LIFT
S/N ALZ1-UP
76.2 MM BORE X 1170.0 MM STROKE
PART OF 8X-1948 CYLINDER & MTG GP-BLADE LIFT

i00123886 SEBP3330

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	132-4927	[1]	CYLINDER AS
	8J-6384	[2]	BUSHING
2.	173-9683 M	[1]	BOLT (M30X3.5X90-MM)
3.	3S-7023	[1]	WASHER (34X57X6-MM THK)
4.	6J-1972 J	[1]	SEAL AS
5.	6J-5733 J	[1]	RING-WEAR
6.	6E-1131	[1]	PISTON
7.	175-7896 J	[1]	SEAL-O-RING
8.	6J-5731 J	[1]	RING-BACKUP
9.	148-2593	[1]	HEAD
10.	119-8666	[1]	ROD AS
11.	308-1845 J	[1]	SEAL-WIPER
12.	289-2946 J	[1]	SEAL-U-CUP
13.	289-2935 J	[1]	SEAL AS-BUFFER
14.	4T-5613 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	238-4462 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP33300768

165-2510: CYLINDER GP-SCARIFIER

CYLINDER GP-SCARIFIER

165-2510 CYLINDER GP-SCARIFIER
S/N ALZ1-UP
76.2-MM (3-IN) BORE X 406.5-MM (16-IN) STROKE
PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER
Type 1
AN ATTACHMENT

i01184176 SEBP3330

1652510 CYLINDER GP-SCARIFIER Parts scheme

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-4211	[1]	PISTON
2.	168-9108	[1]	CYLINDER AS
3.	168-9110	[1]	ROD AS
4.	184-9843	[1]	HEAD
5.	167-2190 J	[1]	SEAL AS-BUFFER
6.	167-2300	[1]	SEAL-U-CUP
7.	231-3539	[1]	SEAL-WIPER
8.	173-9779 M	[1]	BOLT (M24X3X80-MM)
9.	175-7896 J	[1]	SEAL-O-RING
10.	4T-6907 J	[1]	RING-WEAR
11.	6J-1972 J	[1]	SEAL AS
12.	6J-5731 J	[1]	RING-BACKUP
13.	6J-5733 J	[1]	RING-WEAR
14.	6V-8237	[1]	WASHER (26X44X4-MM THK)

			AVAILABLE REPAIR KIT(S):
	376-9017 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP33300769

165-2510: CYLINDER GP-SCARIFIER

CYLINDER GP-SCARIFIER

165-2510 CYLINDER GP-SCARIFIER
S/N ALZ1-UP
76.2-MM (3-IN) BORE X 406.5-MM (16-IN) STROKE
PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER
Type 2
AN ATTACHMENT

i04013789 SEBP3330

For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-4211	[1]	PISTON
2.	168-9108	[1]	CYLINDER AS
3.	168-9110	[1]	ROD AS
4.	184-9843	[1]	HEAD
5.	167-2190 J	[1]	SEAL AS-BUFFER
6.	439-4526 CJ	[1]	SEAL-U-CUP
7.	308-1880 CJ	[1]	SEAL-WIPER
8.	173-9779 M	[1]	BOLT (M24X3X80-MM)
9.	175-7896 J	[1]	SEAL-O-RING
10.	4T-6907 J	[1]	RING-WEAR
11.	9X-7337 J	[1]	SEAL AS
12.	6J-5731 J	[1]	RING-BACKUP
13.	6J-5733 J	[1]	RING-WEAR
14.	6V-8237	[1]	WASHER (26X44X4-MM THK)

			AVAILABLE REPAIR KIT(S):
	376-9017 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Centershift Cylinder Socket - Lubricate
120H and 135H Motor Graders

Centershift Cylinder Socket - Check/Adjust/Replace
120H and 135H Motor Graders

Blade Lift Cylinder Socket - Check/Adjust/Replace
120H and 135H Motor Graders

Blade Lift Cylinder Socket - Lubricate
120H and 135H Motor Graders

Wheel Lean Bearings - Lubricate
120H and 135H Motor Graders

Wheel Lean Cylinder Bearings - Lubricate
120H and 135H Motor Graders

Wheel Lean Bar Bearings - Lubricate
120H and 135H Motor Graders

Ripper Cylinder Bearings - Lubricate
120H and 135H Motor Graders

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}
Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Sideshift Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Wheel Lean Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Blade Lift Cylinder Mounting
120H and 135H Motor Graders Hydraulic and Steering System

Wheel Lean Cylinder and Mounting
120H and 135H Motor Graders Hydraulic and Steering System

Centershift Cylinder and Mounting
120H and 135H Motor Graders Hydraulic and Steering System

Blade Tip Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Articulation Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Steering Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Articulation Cylinder Mounting
120H and 135H Motor Graders Hydraulic and Steering System

Blade Lift Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Centershift Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Ripper Lift Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Scarifier Cylinder
120H and 135H Motor Graders Hydraulic and Steering System

Ripper Cylinder and Lines
120H and 135H Motor Graders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Testing and Adjusting

Cylinder Cycle Time - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Hydraulic Cylinder Drift - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Steering System - Purge
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Bench Test Procedures

Disassembly and Assembly

Blade Lift Cylinder - Remove and Install
120H and 135H Motor Graders Machine Systems

Blade Tip Cylinder - Remove and Install
120H and 135H Motor Graders Machine Systems

Wheel Lean Cylinder - Remove and Install
120H and 135H Motor Graders Machine Systems

Steering Cylinder - Remove and Install
120H and 135H Motor Graders Machine Systems

Sideshift Cylinder - Remove and Install
120H and 135H Motor Graders Machine Systems

Centershift Cylinder - Remove and Install
120H and 135H Motor Graders Machine Systems

Articulation Cylinder - Remove and Install
120H and 135H Motor Graders Machine Systems

Ripper Lift Cylinder - Remove and Install
120H and 135H Motor Graders Machine Systems

Service Magazine

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 120H :

8W-2913 CYLINDER & MTG GP-SCARIFIER

8X-1946 CYLINDER & MTG GP-CENTERSHIFT

8X-1943 CYLINDER & MTG GP-BLADE TIP

8X-1948 CYLINDER & MTG GP-BLADE LIFT

193-1475 CYLINDER & MTG GP-ARTICULATION

208-9698 CYLINDER & LINES GP-RIPPER

265-7820 CONTROL AR-HYDRAULIC

265-7818 CONTROL AR-HYDRAULIC

8W-2290 CYLINDER & MTG GP-STEERING

8W-2737 CYLINDER & MTG GP-WHEEL LEAN

198-8305 CYLINDER GP-ARTICULATION

131-7191 CYLINDER GP-BLADE TIP

6E-1754 CYLINDER GP-CENTERSHIFT

6E-4724 CYLINDER GP-HYDRAULIC

132-4926 CYLINDER GP-LIFT

165-2510 CYLINDER GP-SCARIFIER

Truck sale:

Caterpillar 120H
- motor graders
CAVPOWER

105,000

Caterpillar 120H, motor graders, Construction

105,000

Caterpillar 120H, motor graders, Construction

105,000

Caterpillar 120H, motor graders, Construction

RING POWER CORP.

Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI