AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

219-8096 SEAT GP-SUSPENSION -AIR S/N BAD292-UP PART OF 188-9672 SEAT GP-SUSPENSION 962G II WHEEL LOADER


OPERATOR STATION
SEAT GP
CONTROL GP-STEERING
SUPPORT GP
SUPPRESSION GP
SEAT GP

WHEEL LOADER 962G II WHEEL LOADER BAD
 962G II Wheel Loader BAD00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3339 962G II BAD   (1999)

OPERATOR STATION

SEAT GP
SEAT GP-SUSPENSION
202-0443 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
204-4491 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
219-8096 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
230-4126 SEAT GP-SUSPENSION
SUSPENSION GP-SEAT
172-9444 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
 

#SEBP33390680
 

219-8096: SEAT GP-SUSPENSION

219-8096 SEAT GP-SUSPENSION -AIR
S/N BAD292-UP
PART OF 188-9672 SEAT GP-SUSPENSION
i02015983 SEBP3339
2198096 SEAT GP-SUSPENSION Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-9289 J [4] BLOCK-SLIDER  
2. 173-5787 J [4] SETSCREW (1/4-20-THD)  
3. 178-7914 Y [1] SEAT GP (SUSPENSION)  
4. 191-2933 Y [1] SUSPENSION GP-SEAT (AIR)  
5. 203-7703 J [2] WASHER-HARD (10.2X22.22X2.38-MM THK)  
6. 4F-4879 J [1] BOLT (3/8-16X0.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  173-7035 J [1] KIT-SLIDER BLOCK (SUSPENSION SEAT)  
  J   KIT MARKED J SERVICED BY PARTS MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP33390681
 

230-4126: SEAT GP-SUSPENSION

230-4126 SEAT GP-SUSPENSION -VINYL
S/N BAD1-UP
PART OF 204-4491 SEAT GP-SUSPENSION
i01986087 SEBP3339
2304126 SEAT GP-SUSPENSION Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-5054 HJ [1] KIT-COVER (BACK)  
2. 110-5058 JN [1] KIT-COVER (BOTTOM)  
3. 110-5059 J [1] KIT-SEAT (BOTTOM)  
4. 110-5056 J [1] KIT-SEAT (BACK)  
5. 110-5060 [1] KIT-ARMREST  
6. 110-5061 [1] KIT-ARMREST  
7. 110-5052 J [1] KIT-FRAME AS (SEAT)  
8. 7I-6756 [1] KIT-CABLE ADJUSTER  
9. 110-5062 [1] KIT-SPRING (HEIGHT RISER)  
10. 110-5064 [1] KIT-LEVER AS (HEIGHT RISER)  
11. 110-5067 [1] KIT-HANDLE  
12. 110-5074 [1] KIT-SUSPENSION BEARING  
13. 110-5063 [1] KIT-HEIGHT RISER  
14. 110-5072 [1] KIT-SLIDE RAIL  
15. 110-5065 [1] KIT-DAMPER  
16. 152-9818 [1] SUSPENSION AS-SEAT  
17. 128-2678 [1] KIT-TETHER  
18. 110-5068 [1] KIT-ADJUSTER (SUSPENSION)  
19. 110-5066 [1] KIT-STOP  
20. 152-9821 [1] KIT-SUSPENSION COVER  
   
    AVAILABLE REPAIR KIT(S):
  110-5051 J [1] KIT-UPPER AS  
  235-4878 AH [1] KIT-COVER (BACK)  
  235-4879 AN [1] KIT-COVER (SEAT)  
  A   NOT PART OF THIS GROUP
  H   KIT MARKED H IS A SERVICE REPLACEMENT FOR PART MARKED H
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  N   KIT MARKED N IS A SERVICE REPLACEMENT FOR PART MARKED N
 

#SEBP33390682
 

223-3667: STEERING COLUMN GP-ADJUSTABLE

223-3667 STEERING COLUMN GP-ADJUSTABLE
S/N BAD1-UP
PART OF 141-8802 CONTROL GP-STEERING
i03070283 SEBP3339
2233667 STEERING COLUMN GP-ADJUSTABLE Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-9111 [1] KIT-CONTACT  
    (INCLUDES HORN CONTACT AS, LOCKWASHERS & SCREWS)
2. 6V-8227 M [1] NUT (M18X1.5-THD)  
3. 271-9108 [1] KIT-GAS STRUT  
    (INCLUDES GAS STRUT, PIN & RETAINING RINGS)
4. 271-9109 [1] KIT-TILT LEVER  
    (INCLUDES BOLTS, DOWEL, SPRING & TILT LEVER)
5. 271-9110 [1] KIT-PIVOT  
    (INCLUDES BUSHINGS & PINS)
6. 186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  M   METRIC PART
 

#SEBP33390683
 

185-5311: SUPPORT GP-HYDRAULIC CONTROL

185-5311 SUPPORT GP-HYDRAULIC CONTROL
S/N BAD1-UP
PART OF 185-7631 CAB AR-ENCLOSED ROPS
i01484828 SEBP3339
1855311 SUPPORT GP-HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 8Y-5746 [1] ASHTRAY  
3. 8Y-6334 [1] GASKET (ASHTRAY)  
4. 187-2082 [1] LEVER-CONTROL  
5. 149-2582 [1] PLATE AS  
6. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
7. 173-2217 [1] CUSHION AS  
8. 185-5315 [1] BRACKET  
9. 185-5316 [1] SUPPORT AS  
10. 219-0467 [1] SUPPORT AS  
11. 185-5319 [1] COVER  
12. 219-0465 [1] COVER AS  
13. 201-0575 [1] SUPPORT AS  
14. 187-1878 [1] WASHER-PLASTIC (8.1X19X3.2-MM THK)  
15. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
16. 7X-7729 [3] WASHER (11X25X3-MM THK)  
17. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
18. 8T-4138 M [2] BOLT (M6X1X20-MM)  
19. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 9X-2041 M [13] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
21. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
22. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
23. 5P-6120 D TRIM-EDGE (.1M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP33390684
 

222-2789: SUPPORT GP-HYDRAULIC CONTROL

222-2789 SUPPORT GP-HYDRAULIC CONTROL
S/N BAD1-UP
PART OF 203-9835 CANOPY AR-OPEN ROPS
i01851292 SEBP3339
2222789 SUPPORT GP-HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 8Y-5746 [1] ASHTRAY  
3. 8Y-6334 [1] GASKET (ASHTRAY)  
4. 187-2082 [1] LEVER-CONTROL  
5. [1] PLATE AS  
6. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
7. 173-2217 [1] CUSHION AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
8. 185-5315 [1] BRACKET  
9. 185-5316 [1] SUPPORT AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
10. 219-0467 [1] SUPPORT AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [2] LINK  
  8T-3490 M [5] NUT-WELD (M10X1.5-THD)  
  8T-3851 M [1] BOSS-WELD (M10X1.5X17.5-MM)  
11. 185-5319 [1] COVER  
12. 219-0465 [1] COVER AS  
13. 201-0575 [1] SUPPORT AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  7T-1099 [3] LINK  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3851 M [1] BOSS-WELD (M10X1.5X17.5-MM)  
14. 187-1878 [1] WASHER-PLASTIC (8.1X19X3.2-MM THK)  
15. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. [1] ANGLE  
17. 3T-4509 [1] PLATE  
18. 8T-4138 M [2] BOLT (M6X1X20-MM)  
19. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 9X-2041 M [15] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
21. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
22. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
23. 5P-6120 D TRIM-EDGE (0.1-M)  
24. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4133 M [4] NUT (M10X1.5-THD)  
26. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
27. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP33390685
 

229-8216: SUPPRESSION GP-CAB SOUND

229-8216 SUPPRESSION GP-CAB SOUND
S/N BAD289-UP
PART OF 185-7631 CAB AR-ENCLOSED ROPS
i02086020 SEBP3339
2298216 SUPPRESSION GP-CAB SOUND Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4168 [1] INSULATION  
2. 228-4428 [1] INSULATION  
 

#SEBP33390686
 

172-9444: SUSPENSION GP-SEAT

172-9444 SUSPENSION GP-SEAT -AIR
S/N BAD1-UP
PART OF 178-7916 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
i01487065 SEBP3339
1729444 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-4818 [4] LOCKWASHER (EXTERNAL TOOTH)  
2. 8Y-6917 [1] BOOT  
3. 102-6317 [2] BUMPER  
4. 123-8157 [2] SHAFT  
5. 123-9131 [1] ABSORBER AS-SHOCK  
6. 124-7126 [1] SCISSORS AS  
7. 124-7128 [1] BUSHING-RELIEF  
8. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
9. 147-4549 [1] FITTING-ELBOW  
10. 147-6522 [1] SPRING  
11. 149-2399 [1] FITTING  
12. 149-2400 [1] FITTING  
13. 149-2403 [1] VALVE AS  
14. 160-7765 [1] WASHER (16.26X22.23X1.97-MM THK)  
15. 160-7766 B [3] WASHER (16.26X22.23X0.51-MM THK)  
16. 160-7767 B [8] WASHER (3.68X12.57X0.51-MM THK)  
17. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
18. 171-4045 [1] HOUSING AS  
19. 1B-4430 [4] NUT-JAM (1/2-20-THD)  
20. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
21. 4V-7884 [2] BEARING  
22. 4V-8556 [1] BOLT (3/8-16X2.20-IN)  
23. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
24. 6K-0806 [1] STRAP-CABLE  
25. 8L-8413 [4] STRAP-CABLE (WHITE)  
26. 8M-3267 [1] SCREW-HEX SOCKET (3/8-16X0.75-IN)  
27. 8Y-6922 [1] HOUSING AS  
28. 9M-0164 [1] CLAMP-HOSE  
29. 147-6541 E TUBE (38CM)  
30. JZ [1] COMPRESSOR AS  
31. JZ [1] SLEEVE  
32. LZ [30] CLIP  
33. NZ [4] BEARING  
34. NZ [4] ROLLER  
35. VZ [2] TETHER  
   
    AVAILABLE REPAIR KIT(S):
  149-2398 J [1] KIT-AIR COMPRESSOR  
  8Y-6928 L [1] KIT-FASTENER  
  123-9128 N [1] KIT-ROLLER  
    (INCLUDES TIE WRAP)
  128-0613 V [1] KIT-TETHER  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REPAIR KIT MARKED J INCLUDES PART(S) MARKED J
  L   REPAIR KIT MARKED L INCLUDES PART(S) MARKED L
  N   REPAIR KIT MARKED N INCLUDES PART(S) MARKED N
  V   REPAIR KIT MARKED V INCLUDES PART(S) MARKED V
  Z   NOT SERVICED SEPARATELY
 

#SEBP33390687
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N BAD1-UP
PART OF 219-8096 SEAT GP-SUSPENSION
i01816125 SEBP3339
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [33] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 192-7760 [1] SHAFT  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  211-5358 E CONDUIT-FLEXIBLE (64-CM)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 192-7822 [1] SHAFT  
23. 237-3943 [1] BRACKET  
24. 237-3970 Y [1] AIR COMPRESSOR GP-SEAT  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.267-M)  
31A. 5P-6010 D TUBE (0.356-M)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 B [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33390688
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N BAD292-UP
PART OF 219-8096 SEAT GP-SUSPENSION
Type 1
i05781895 SEBP3339
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  211-5358 E CONDUIT-FLEXIBLE (64-CM)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
23. 372-2158 C [1] BRACKET-MOUNTING  
24. 370-9894 C [1] COMPRESSOR AS  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.27-M)  
31A. 5P-6010 D TUBE (0.36-M)  
32. 387-0314 C [1] WIRE AS (16-GA, ORANGE)  
33. 387-0317 C [1] WIRE AS (16-GA, BLACK)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP33390689
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N BAD292-UP
PART OF 219-8096 SEAT GP-SUSPENSION
Type 2
i05823827 SEBP3339
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 962G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 CY [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (29-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (43-CM)  
32. 442-8151 C [1] CLIP-CABLE  
33. 3S-2093 C [5] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  452-6716 CY [1] KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT)  
    (INCLUDES SCREWS, COMPRESSOR AS, BRACKET, STRAPS & HOSE)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Seat
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Seat Belt - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Seat Belt - Inspect
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Seat Belt
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Technical Information Bulletin
Operator Seat Belt Not Retracting {7327}
Operator Seat Belt Not Retracting {7327}
Systems Operation
Mechanical Suspension
Contour Series Seat
Comfort Seat Air Suspension with Air Compressor
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar, Side Controls, and Slide Swivel
Comfort Series Seat For Caterpillar Machines
Serial Number Effectivity
Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with System Air
Comfort Series Seat For Caterpillar Machines
Comfort Seat Controls
Comfort Series Seat For Caterpillar Machines
Optimized Seat Air Suspension with Air Compressor
Comfort Series Seat For Caterpillar Machines
Optimized Seat Controls
Comfort Series Seat For Caterpillar Machines
Optimized Seat with Lumbar, Side Controls, and Slide Swivel
Comfort Series Seat For Caterpillar Machines
Seat Maintenance Interval Schedule
Comfort Series Seat For Caterpillar Machines
General Information
Comfort Series Seat For Caterpillar Machines
Component Descriptions
Comfort Series Seat For Caterpillar Machines
Troubleshooting
Comfort Series Seat For Caterpillar Machines
General Information
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Component Descriptions
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Testing and Adjusting
Troubleshooting Chart
Comfort Series Seat For Caterpillar Machines
Troubleshooting
Troubleshooting
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Disassembly and Assembly
Swivel Seat - Disassemble
Contour Series Seat
Swivel Seat - Assemble
Comfort Series Seat For Caterpillar Machines
Air Suspension With Toggle Switch Height Adjustment - Disassemble
Contour Series Seat
Air Suspension With Toggle Switch Height Adjustment - Assemble
Contour Series Seat
Air Suspension With System Air - Disassemble
Comfort Series Seat For Caterpillar Machines
Air Suspension With System Air - Assemble
Contour Series Seat
Mechanical Suspension With Fixed Damper - Disassemble
Comfort Series Seat For Caterpillar Machines
Mechanical Suspension With Fixed Damper - Assemble
Comfort Series Seat For Caterpillar Machines
Mechanical Suspension With Variable Damper - Disassemble
Contour Series Seat
Mechanical Suspension With Variable Damper - Assemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar Option and Side Controls - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar Option and Side Controls - Assemble
Comfort Series Seat For Caterpillar Machines
Seat - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Seat - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Air Suspension with Air Valve Knob Height Adjustment - Disassemble
Comfort Series Seat For Caterpillar Machines
Air Suspension With Air Valve Knob Height Adjustment - Assemble
Contour Series Seat
Comfort Seat Air Suspension with Air Compressor - Assemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with Air Compressor - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Front Controls - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Front Controls - Assemble
Comfort Series Seat For Caterpillar Machines
Optimized Seat with Front Controls - Disassemble and Assemble
Comfort Series Seat For Caterpillar Machines
Service Magazine
An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}

Caterpillar Parts SIS Catalog 962G II :

SEAT GP-SUSPENSION
204-4491 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
202-0443 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
202-0443 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
188-9672 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
188-9672 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
178-7916 SEAT GP-SUSPENSION
152-4821 SEAT GP-SUSPENSION
SEAT GP
489-6483 SEAT GP
SEAT GP-SUSPENSION
230-4126 SEAT GP-SUSPENSION
STEERING COLUMN GP-ADJUSTABLE
223-3667 STEERING COLUMN GP-ADJUSTABLE
SUPPORT GP-HYDRAULIC CONTROL
185-5311 SUPPORT GP-HYDRAULIC CONTROL
SUPPORT GP-HYDRAULIC CONTROL
222-2789 SUPPORT GP-HYDRAULIC CONTROL
SUPPRESSION GP-CAB SOUND
229-8216 SUPPRESSION GP-CAB SOUND
SUSPENSION GP-SEAT
172-9444 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT

Truck sale:

CATERPILLAR 962GII 2003
 
CATERPILLAR 962GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
PATTEN INDUSTRIES
United States
CATERPILLAR 962GII 2004
 
CATERPILLAR 962GII 2004
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 962GII 2005
 
CATERPILLAR 962GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FOLEY EQUIPMENT CO. (KS/MO)
1550 S. West Street - Wichita - Kansas
 
 
CATERPILLAR 962G II 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
2002 CAT 962G II
Call 
2002 CAT 962G II

Smeets & Zonen
Peer, BELGIUM, Belgium
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.