AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

180-6644 DRIVE GP-UNIT INJ HYD PUMP S/N 5JJ251-UP PART OF 125-3431 DRIVE GP-UNIT INJ HYD PUMP 990 II


FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
FILTER GP-FUEL
HEATER GP-FUEL
LINES GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
LINES GP-FUEL
FILTER GP-FUEL

WHEEL LOADER 990 II WHEEL LOADER BCR
 990 Series II Wheel Loader BCR00001-UP (MACHINE) SEBP3340 990 II BCR   (1999)

FUEL SYSTEM

PUMP GP-UNIT INJECTOR HYD
DRIVE GP-UNIT INJ HYD PUMP
125-3431 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
180-6644 DRIVE GP-UNIT INJ HYD PUMP
KIT-SEAL
138-6256 KIT-SEAL
LINES GP-INJECTOR HYD PUMP
109-0399 LINES GP-INJECTOR HYD PUMP
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
 

#SEBP33400100
 

180-6644: DRIVE GP-UNIT INJ HYD PUMP

180-6644 DRIVE GP-UNIT INJ HYD PUMP
S/N 5JJ251-UP
PART OF 125-3431 DRIVE GP-UNIT INJ HYD PUMP
i01324370 SEBP3340
1806644 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-6645 [1] SHAFT AS  
1A. 3S-6605 [1] PLUG-CUP  
2. 150-2392 [1] PLATE-THRUST  
3. 180-6646 [1] GASKET  
4. 180-6647 [1] HOUSING AS  
4A. 2H-1190 [2] DOWEL  
4B. 162-0151 [1] BUSHING (38.1-MM OD)  
4C. 162-0152 [1] BUSHING (94.8-MM OD)  
5. 162-0160 [1] HOUSING AS  
5A. 2A-3746 [1] PLUG-CUP  
5B. 162-0150 [1] BUSHING (28.7-MM OD)  
5C. 162-0151 [1] BUSHING (38.1-MM OD)  
6. 125-5835 [1] PLUG-FELT (UNIT INJECTOR HYDRAULIC PUMP)  
7. 1B-9575 [4] BOLT (5/16-18X1.56-IN)  
8. 0S-1618 [2] BOLT (5/16-18X1-IN)  
9. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
10. 9S-8004 [1] PLUG (9/16-18-THD)  
11. 6V-5049 [1] SEAL-O-RING  
12. 1D-4541 [2] BOLT (5/16-18X3-IN)  
13. 8M-6802 [3] SCREW-HEX SOCKET (1/4-20X1-IN)  
14. 155-6637 [1] GEAR-OIL DRIVE (18-TEETH)  
15. 124-6640 [1] PLATE  
16. 031-2701 [2] BOLT-LOCKING (5/16-18X1.25-IN)  
 

#SEBP33400101
 

131-0463: FILTER GP-WATER SEP & FUEL

131-0463 FILTER GP-WATER SEP & FUEL -PRIMARY
S/N BCR1-UP
PART OF 184-6457 INSTALLATION AR-ENGINE
i00172234 SEBP3340
1310463 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
  7E-5346 [1] VALVE AS (FUEL FILTER)  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
2. 129-0372 [1] FILTER AS-WATER SEP & FUEL (PRIMARY)  
  133-5673 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
  129-0375 [1] BOWL AS-WATER COLLECTION  
  141-0284 [1] KIT-SEAL  
    (INCLUDES GASKET & SEAL)
3. 9S-8002 [4] PLUG (7/16-20-THD)  
4. 6V-5048 [4] SEAL-O-RING  
 

#SEBP33400102
 

8N-9830: HEATER GP-FUEL-COOLANT

8N-9830 HEATER GP-FUEL-COOLANT
S/N BCR1-UP
FOR USE WITH DEFROSTER AND HEATER AR
i00167182 SEBP3340
8N9830 HEATER GP-FUEL-COOLANT Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-1641 [1] CLIP (LOOP)  
2. 6P-8855 [2] SPACER-TUBE  
3. 7C-7397 C [2] CONNECTOR  
4. 9X-2488 [14] CLAMP-HOSE  
5. 9P-6019 [1] HOSE-HEATER INLET  
6. 8S-1879 [4] ELBOW-HOSE  
7. 1P-3956 [1] TUBE  
8. 8N-9707 [1] REGULATOR-FUEL TEMPERATURE  
  2M-9780 [1] SEAL-O-RING  
9. 5P-2955 [1] BOLT (5/16-18X2.5-IN)  
10. 7X-0264 [1] BOLT (1/4-20X2.5-IN)  
11. 8N-9584 [1] ADAPTER  
  1P-0436 [2] GASKET (FUEL PRIMING PUMP)  
12. 8N-9745 [1] BASE AS-FUEL FILTER  
  8N-2101 [2] STUD-HOLLOW  
13. 9S-8004 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
14. 7C-7367 C [2] HEATER AS-FUEL  
  7C-7398 C [2] SEAL  
15. 3S-2093 [1] STRAP-CABLE  
16. 5P-0767 BE HOSE  
17. 5P-0767 BE HOSE  
18. 4L-6454 [2] BOLT (3/8-16X1-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 9N-3666 [2] VALVE-MANUAL  
20. 8L-6005 [2] TEE-PIPE  
21. 3K-7928 [2] ELBOW  
22. 7D-7026 [2] CONNECTOR-HOSE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP33400103
 

209-1995: INJECTOR GP-FUEL

209-1995 INJECTOR GP-FUEL
S/N 5JJ251-1220
PART OF 209-2785 PUMP GP-FUEL INJECTION
i01621192 SEBP3340
2091995 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-3598 [1] ADAPTER-INJECTION  
2. 136-1869 [2] BOLT-SOCKET HEAD  
4. 116-7222 [1] SEAL-RECTANGULAR  
 

#SEBP33400104
 

232-1173: INJECTOR GP-FUEL

232-1173 INJECTOR GP-FUEL
S/N 5JJ1221-UP
PART OF 209-2785 PUMP GP-FUEL INJECTION
FIELD REPLACEMENT ORDER 1-232-1171 INJECTOR GP-FUEL
i03165403 SEBP3340
2321173 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-3598 [1] ADAPTER-INJECTION  
2. 136-1869 [2] BOLT-SOCKET HEAD  
3. 116-7222 [1] SEAL-RECTANGULAR  
 

#SEBP33400105
 

138-6256: KIT-SEAL

138-6256 KIT-SEAL -UNIT INJECTOR HYDRAULIC PUMP
S/N 5JJ251-UP
PART OF 144-0835, 201-4202, 225-0567, 235-2026 PUMP GP-UNIT INJECTOR HYD
i01166964 SEBP3340
1386256 KIT-SEAL Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-9685 [4] SEAL-O-RING  
2. 033-5853 [3] SEAL-O-RING  
3. 109-3206 [1] SEAL-O-RING  
4. 033-6042 [4] SEAL-O-RING  
5. 108-5803 [1] SEAL-O-RING  
6. 6V-5142 [2] SEAL-O-RING  
7. 9X-7680 [6] SEAL-O-RING  
8. 033-6027 [2] SEAL-O-RING  
9. 033-6039 [1] SEAL-O-RING  
10. 133-1705 [1] GASKET-HOUSING  
11. 6V-8676 [1] SEAL-O-RING  
12. 135-2655 [2] SEAL-O-RING  
13. 135-2652 [1] SEAL-O-RING  
 

#SEBP33400106
 

123-1061: LINES GP-FUEL

123-1061 LINES GP-FUEL
S/N BCR1-151
PART OF 185-2365 CHASSIS AR
i00172192 SEBP3340
1231061 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1310 [4] CLIP  
2. 1B-3057 [5] CLIP  
3. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4133 M [9] NUT (M10X1.5-THD)  
5. 9U-0531 [1] TUBE AS  
6. 6V-8398 [6] SEAL-O-RING  
7. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 8T-0081 [3] VALVE-BALL  
9. 3K-0360 [6] SEAL-O-RING  
10. 6V-8625 [1] ELBOW  
11. 5B-5839 [2] SPACER (0.562X1X0.75-IN THK)  
12. 7X-0326 [2] BOLT (1/2-13X3-IN)  
13. 9U-0709 [1] BRACKET  
14. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
15. 6V-8721 [1] ELBOW  
16. 2M-9780 [1] SEAL-O-RING  
17. 6V-8397 [4] SEAL-O-RING  
18. 123-1062 I [1] HOSE AS  
19. 1S-0994 [2] CLIP (LOOP)  
20. 126-6255 [1] TUBE AS  
21. 9U-0533 I [1] HOSE AS  
22. 123-1063 I [1] HOSE AS  
23. 6V-8634 [1] CONNECTOR  
24. 9U-0528 [1] TUBE AS  
25. 9U-0527 [1] TUBE AS  
26. 6V-8639 [1] CONNECTOR  
27. 7X-0732 [1] WASHER-HARD (10X22.5X8-MM THK)  
28. 7B-7501 [1] CLIP  
29. 9S-1350 [1] CLIP  
30. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
31. 6V-8724 [1] ELBOW (90 DEGREE)  
32. 3J-1907 [1] SEAL-O-RING  
33. 8M-2773 [1] CLIP (LOOP)  
34. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
35. 7C-6921 [1] SPACER (11X20X22.8-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33400107
 

123-1061: LINES GP-FUEL

123-1061 LINES GP-FUEL
S/N BCR152-191
PART OF 185-2365 CHASSIS AR
i01831665 SEBP3340
1231061 LINES GP-FUEL Parts scheme 1231061 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-5839 [2] SPACER (0.562X1X0.75-IN THK)  
2. 7C-6921 [1] SPACER (11X20X22.8-MM THK)  
3. 8T-0081 [1] VALVE-BALL  
4. 9U-0527 [1] TUBE AS  
5. 9U-0528 [1] TUBE AS  
6. 9U-0533 I [1] HOSE AS  
7. 9U-0709 [1] BRACKET  
8. 123-1062 I [1] HOSE AS  
9. 123-1063 I [1] HOSE AS  
10. 171-6729 [2] VALVE GP-SHUTOFF (MANUAL)  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  8T-0081 [1] VALVE-BALL  
11. 223-4478 [1] TUBE AS  
12. 223-4479 [1] TUBE AS  
13. 148-8318 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
14. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
15. 1B-3057 [6] CLIP  
16. 1S-0994 [2] CLIP (LOOP)  
17. 2M-9780 [1] SEAL-O-RING  
18. 3K-0360 [2] SEAL-O-RING  
19. 4D-7735 [1] CLIP  
20. 6V-8397 [3] SEAL-O-RING  
21. 6V-8398 [5] SEAL-O-RING  
22. 6V-8625 [1] ELBOW  
23. 6V-8721 [1] ELBOW  
24. 6V-8724 [1] ELBOW (90 DEGREE)  
25. 7X-0326 [2] BOLT (1/2-13X3-IN)  
26. 7X-0732 [1] WASHER-HARD (10X22.5X8-MM THK)  
27. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [8] NUT (M10X1.5-THD)  
29. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
30. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
31. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
33. 9S-1310 [5] CLIP  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33400108
 

123-1061: LINES GP-FUEL

123-1061 LINES GP-FUEL
S/N BCR192-UP
PART OF 185-2365 CHASSIS AR
i01928720 SEBP3340
1231061 LINES GP-FUEL Parts scheme 1231061 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-5839 [2] SPACER (0.562X1X0.75-IN THK)  
2. 7C-6921 [1] SPACER (11X20X22.8-MM THK)  
3. 8T-0081 [1] VALVE-BALL (FUEL SHUTOFF)  
4. 9U-0527 [1] TUBE AS  
5. 9U-0528 [1] TUBE AS  
6. 9U-0533 I [1] HOSE AS  
7. 9U-0709 [1] BRACKET  
8. 123-1063 I [1] HOSE AS  
9. 171-6729 [2] VALVE GP-SHUTOFF (MANUAL)(FUEL LINES SHUTOFF)  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING (16.36MM ID)  
  8T-0081 [1] VALVE-BALL  
10. 223-4478 [1] TUBE AS  
11. 223-4479 [1] TUBE AS  
12. 224-7609 I [1] HOSE AS  
13. 148-8318 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING (16.36MM ID)  
  6V-8397 [1] SEAL-O-RING (12.83MM OD)  
  6V-8634 [1] CONNECTOR  
14. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING (16.36MM ID)  
  6V-8398 [1] SEAL-O-RING (16.03MM OD)  
  6V-8639 [1] CONNECTOR  
15. 1B-3057 [6] CLIP  
16. 1S-0994 [2] CLIP (LOOP)  
17. 2M-9780 [1] SEAL-O-RING  
18. 3K-0360 [2] SEAL-O-RING  
19. 4D-7735 [1] CLIP  
20. 6V-8397 [3] SEAL-O-RING (12.83MM OD)  
21. 6V-8398 [5] SEAL-O-RING (16.03MM OD)  
22. 6V-8625 [1] ELBOW  
23. 6V-8721 [1] ELBOW  
24. 7X-0326 [2] BOLT (1/2-13X3-IN)  
25. 7X-0732 [1] WASHER-HARD (10X22.5X8-MM THK)  
26. 8T-1905 [1] ELBOW (90 DEGREE)  
27. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [8] NUT (M10X1.5-THD)  
29. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
30. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
31. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
33. 9S-1310 [5] CLIP  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33400109
 

205-4943: LINES GP-FUEL FILTER

205-4943 LINES GP-FUEL FILTER
S/N 5JJ251-744
PART OF 184-6458 ENGINE AR
i01638966 SEBP3340
2054943 LINES GP-FUEL FILTER Parts scheme 2054943 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 1R-0749 [2] FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY)  
3. 6N-2946 [1] BASE AS-FUEL FILTER  
  6V-5049 [1] SEAL-O-RING  
  9S-4167 [2] STUD-HOLLOW (1-14X1.47-IN)  
  9S-8004 [1] PLUG (9/16-18-THD)  
4. 6N-4414 [1] COVER-FILTER BASE  
5. 8N-9798 [1] PLATE  
6. 102-2240 [1] SENSOR GP-TEMPERATURE (3-PIN)(FUEL)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-1813 E SLEEVE (31CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 102-7535 Y [1] VALVE GP-CHECK (FUEL)  
8. 115-4316 [1] TUBE AS  
9. 115-4317 [1] TUBE AS  
10. 117-8990 [2] CLIP  
11. 119-0960 [1] BRACKET  
12. 123-0555 [1] MANIFOLD  
13. 125-6797 I [1] HOSE AS  
14. 125-6798 I [1] HOSE AS  
15. 125-6799 I [1] HOSE AS  
16. 205-4944 [1] TUBE AS  
17. 205-4945 [1] TUBE AS  
18. 033-6033 [8] SEAL-O-RING  
20. 0S-1594 [6] BOLT (3/8-16X1-IN)  
21. 1A-1460 [1] BOLT (1/2-13X2-IN)  
22. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
23. 1B-3057 [3] CLIP  
24. 1B-9575 [2] BOLT (5/16-18X1.56-IN)  
25. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
26. 1S-6420 [1] CLIP  
27. 2Y-5829 M [1] NUT (M10X1.5-THD)  
28. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
29. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
30. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 6V-1820 M [1] BOLT (M10X1.5X30-MM)  
32. 6V-5048 [1] SEAL-O-RING  
33. 6V-5049 [17] SEAL-O-RING  
34. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
35. 6V-8634 [1] CONNECTOR  
36. 6V-8636 [1] CONNECTOR  
37. 6V-8724 [2] ELBOW  
38. 6V-8775 [1] TEE-FACE SEAL  
39. 6V-9873 [4] CONNECTOR  
40. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
41. 7D-1649 [3] WASHER-HARD (13.5X32X5-MM THK)  
42. 8L-2779 [4] SEAL-O-RING  
43. 8L-2786 [3] SEAL-O-RING  
44. 8T-6876 [2] ELBOW  
45. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
46. 9S-4182 [1] PLUG (7/16-20-THD)  
47. 9S-4191 [4] PLUG (9/16-18-THD)  
48. 9S-8004 [4] PLUG (9/16-18-THD)  
49. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 9X-8874 [1] BOLT (1/2-13X3-IN)  
51. 116-5819 [1] BRACKET  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Injection Actuation Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3408E and 3412E Engines for Caterpillar Built Machines
Hydraulic Pump Drive
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Troubleshooting
CID 0042 FMI 05 Injector Actuation Valve open circuit
3412E Engine for Caterpillar Built Machines
CID 0042 FMI 06 Injector Actuation Valve short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3412E Engine for Caterpillar Built Machines
E164 High Injector Actuation Pressure
3412E Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Install
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Troubleshooting the Injection Actuation Pressure on Unit Injector Hydraulic Pumps {1714}
2006/11/13

Caterpillar Parts SIS Catalog 990 II :

DRIVE GP-UNIT INJ HYD PUMP
125-3431 DRIVE GP-UNIT INJ HYD PUMP
ADAPTER GP-FAST FILL FUEL
9U-2909 ADAPTER GP-FAST FILL FUEL
ADAPTER GP-FAST FILL FUEL
221-9254 ADAPTER GP-FAST FILL FUEL
ADAPTER GP-FAST FILL FUEL
221-9254 ADAPTER GP-FAST FILL FUEL
ADAPTER GP-FAST FILL FUEL
221-9254 ADAPTER GP-FAST FILL FUEL
ADAPTER GP-FAST FILL FUEL
221-9254 ADAPTER GP-FAST FILL FUEL
TURBOCHARGER GP
201-0262 TURBOCHARGER GP
TURBOCHARGER GP
196-5946 TURBOCHARGER GP
FILTER GP-WATER SEP & FUEL
131-0463 FILTER GP-WATER SEP & FUEL
HEATER GP-FUEL-COOLANT
8N-9830 HEATER GP-FUEL-COOLANT
INJECTOR GP-FUEL
209-1995 INJECTOR GP-FUEL
INJECTOR GP-FUEL
232-1173 INJECTOR GP-FUEL
KIT-SEAL
138-6256 KIT-SEAL
LINES GP-FUEL
123-1061 LINES GP-FUEL
LINES GP-FUEL
123-1061 LINES GP-FUEL
LINES GP-FUEL
123-1061 LINES GP-FUEL

Truck sale:

2005 CAT 990 II
USD $249,500 
2005 CAT 990 II

Kiewit Equipment
Portsmouth, Virginia
2000 CAT 990 II
Call 
2000 CAT 990 II

Chepstow Plant International LTD
Caldicot, England, United Kingdom
 
 
CAT 990 II

H & R Construction Parts & Equipment
Buffalo, New York
1999 CAT 990 II
Call 
1999 CAT 990 II

AS Roger Jensen Trading Co.Ltd.
 
 
CAT 990 II

TAC Parts (Formerly Parts & Equipment)
Uhrichsville, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.