205-6413 GENERAL AR-GENSET S/N CAH1-UP 500 KVA 3456 GENERATOR SET

Pos.	Part No	Qty	Parts name
1.	1B-3867	[2]	BALL BEARING
2.	4F-7957	[3]	BOLT (1/4-20X0.875-IN)
3.	6I-4575	[1]	GEAR (34 TEETH)
4.	9X-2038	[3]	WASHER (7X19X2-MM THK)
5.	133-9906	[1]	ADAPTER
6.	1H-8647	[1]	RING-SNAP

#SEBP33480012

122-1248: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
S/N 7WG1-UP

i00994567 SEBP3348

1221248 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your 3456 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS (UNIT INJECTOR)
3.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
4.	343-7235	[1]	HARNESS AS-ENGINE (ELECTRONIC UNIT INJECTOR)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	103-8134	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	7E-6513	[6]	CONNECTOR AS
	8T-8729	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	066-8391	[6]	TERMINAL-BLADE (14-GA TO 18-GA)
5.	123-3202	[3]	STRAP-CABLE
6.	5P-5678 B		SEAL (3-M)
7.	289-8215 C	[1]	BASE-VALVE MECHANISM COVER
8.	326-4512	[6]	MOUNTING-CABLE TIE (MARKED BY X)
9.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
10.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP33480013

122-1248: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
S/N 7WG1500-UP

i05957104 SEBP3348

For full view, you need register

Parts for your 3456 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS (UNIT INJECTOR)
3.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
4.	425-6526 Y	[1]	HARNESS AS-ENGINE (ELECTRONIC UNIT INJECTOR)
5.	123-3202	[6]	STRAP-CABLE
6.	272-0390 C	[1]	SEAL
7.	419-3614 C	[1]	BASE-VALVE COVER
8.	326-4512	[6]	MOUNTING-CABLE TIE (MARKED BY X)
9.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
10.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP33480014

130-9710: CAMSHAFT GP

CAMSHAFT GP

130-9710 CAMSHAFT GP
S/N 7WG1-UP

i01520084 SEBP3348

For full view, you need register

Parts for your 3456 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-9089	[1]	COVER
2.	119-0036	[3]	SCREW-FLAT HEAD (5/16-18X0.875-IN)
3.	6V-1197	[1]	SEAL-O-RING

#SEBP33480015

102-2271: COVER GP-CAMSHAFT

COVER GP-CAMSHAFT

102-2271 COVER GP-CAMSHAFT
S/N 7WG1-UP

i01174922 SEBP3348

For full view, you need register

Parts for your 3456 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	146-8438	[1]	SCREW-BUTTON HEAD (5/16-18-THD)
2.	1A-9579	[7]	BOLT (5/16-18X1.5-IN)
3.	5P-4116	[9]	WASHER-HARD (8.8X20.5X2-MM THK)
4.	146-2601	[1]	COVER
5.	103-6045	[1]	SEAL (FRONT COVER)
6.	5S-0003	[2]	NUT (5/16-18-THD)
7.	100-3099	[1]	COVER AS-PANEL
8.	008-1430	[2]	STUD (5/16-18X225-IN)
9.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)

#SEBP33480016

107-6736: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

107-6736 COVER GP-CYLINDER BLOCK
S/N 7WG1-UP

i00970224 SEBP3348

1076736 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 3456 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[2]	BOLT (3/8-16X1-IN)
2.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	4W-9890	[1]	COVER
4.	4N-0699	[1]	GASKET

#SEBP33480017

121-0168: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

121-0168 COVER GP-CYLINDER BLOCK
S/N 7WG1-UP

i00982293 SEBP3348

1210168 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 3456 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
2.	100-7432	[1]	GASKET
3.	6N-1709	[2]	SPACER (0.547X1.0X0.57-IN THK)
4.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	1F-7958	[3]	NUT-FULL (1/2-13-THD)
6.	1W-2488	[1]	COVER

#SEBP33480018

175-2579: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

175-2579 COVER GP-CYLINDER BLOCK
S/N 7WG1-UP
BREATHER OPENING

i01157090 SEBP3348

1752579 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 3456 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	109-7424	[1]	COVER-CYLINDER BLOCK
2.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	0S-1591	[4]	BOLT (3/8-16X1.5-IN)
4.	109-7425	[1]	SEAL-COVER

#SEBP33480019

197-4555: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

197-4555 COVER GP-CYLINDER BLOCK
S/N 7WG1-UP

i01550732 SEBP3348

1974555 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 3456 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	145-9277	[1]	COVER
2.	126-4935	[1]	SEAL-INTEGRAL
3.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
4.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5.	7W-6492	[2]	PLUG-PIPE (1/2-14-THD)

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

How Is Service Information Accessed / Used {1000}
2009/04/27

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Reuse And Salvage Guidelines

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/01/21

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 3456 :

194-4801 GENERAL AR-GENSET

194-4800 GENERAL AR-GENSET

235-3436 ENGINE AR-CORE

192-6490 ENGINE AR-CORE

192-6489 ENGINE AR-CORE

245-4917 ENGINE AR-COMPLETE

245-4916 ENGINE AR-COMPLETE

205-1030 ENGINE AR-COMPLETE

133-9907 ADAPTER GP-PUMP DRIVE

122-1248 BASE GP-VALVE COVER & INJ HARN

130-9710 CAMSHAFT GP

102-2271 COVER GP-CAMSHAFT

107-6736 COVER GP-CYLINDER BLOCK

121-0168 COVER GP-CYLINDER BLOCK

175-2579 COVER GP-CYLINDER BLOCK

Truck sale:

165,000

Caterpillar 3456, Stationary Generator Sets, Construction
- Stationary Generator Sets
PANTROPIC POWER SYSTEMS

290,665

Caterpillar 3456, mobile generator sets, Construction
- mobile generator sets
TOROMONT POWER SYSTEMS

Caterpillar 3456, Stationary Generator Sets, Construction
- Stationary Generator Sets
STOWERS POWER SYSTEMS

Caterpillar 3456, Stationary Generator Sets, Construction