202-4150 WIRING GP-STEERING S/N 3PN2500-UP PART OF 202-4153 AXLE AR-REAR AN ATTACHMENT TH103 TELEHANDLER

202-4150: WIRING GP-STEERING

202-4150 WIRING GP-STEERING
S/N 3PN2500-UP
PART OF 202-4153 AXLE AR-REAR
AN ATTACHMENT

Parts for your TH103 TELEHANDLER:

Pos.	Part No	Qty	Parts name
1.	3S-2093 B	[5]	STRAP-CABLE
2.	117-7451	[1]	SWITCH AS (SUPPLEMENTARY STEERING)
	111-7899	[1]	GASKET
3.	140-9378	[1]	RELAY AS (12-VOLT)(12 VOLT)
4.	141-8050	[1]	SWITCH AS (STEERING)
	111-7899	[1]	GASKET
5.	202-4151	[1]	HARNESS AS (STEERING)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	B		USE AS REQUIRED

200-7583: AXLE AR-REAR

AXLE AR-REAR

200-7583 AXLE AR-REAR
S/N 3PN2500-UP
WITHOUT SELF-ALIGNING REAR STEERING
AN ATTACHMENT

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-0387	[1]	SWITCH AS (MODE SELECT)
	111-7899	[1]	GASKET
2.	200-2424 Y	[1]	AXLE GP-DRIVE & STEERING (REAR)
3.	6V-8723	[2]	ELBOW (90 DEGREE)
	3K-0360	[2]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
4.	7X-2488 M	[4]	BOLT (M20X2.5X160-MM)
5.	8T-4123	[8]	WASHER (3.62X5.75X0.375-MM THK)
6.	8T-4131 M	[4]	NUT (M20X2.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

202-4153: AXLE AR-REAR

AXLE AR-REAR

202-4153 AXLE AR-REAR
S/N 3PN2500-UP
WITH SELF-ALIGNING REAR STEERING
AN ATTACHMENT

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Part No	Qty	Parts name
197-6047 Y	[1]	AXLE GP-REAR
202-4150 Y	[1]	WIRING GP-STEERING
Y		SEPARATE ILLUSTRATION

168-7445: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

168-7445 AXLE GP-DRIVE & STEERING
S/N 3PN2500-UP
PART OF 197-6047 AXLE GP-REAR
AN ATTACHMENT

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8201 M	[3]	BOLT-SOCKET HEAD (M16X2X45-MM)
2.	198-7806	[1]	FITTING-GREASE
3.	199-0651	[1]	FITTING-GREASE
4.	198-7807	[2]	STRAP (STEERING)
5.	198-7808	[2]	CAP (PROTECTION)
6.	219-8795	[1]	CAP (PLASTIC)
7.	197-9155	[1]	BREATHER (DRIVE AXLE)
8.	198-7810	[4]	DOWEL
9.	198-7811	[3]	DOWEL
10.	198-7812	[1]	ADAPTER-BREATHER
11.	198-7813	[1]	BUSHING (INNER)
12.	198-7815	[2]	BUSHING
13.	152-6144	[1]	PLUG AS-DRAIN (MAGNETIC)
	6V-6228	[1]	SEAL-O-RING
14.	199-0677	[13]	BOLT (M14X2X40-MM)
15.	157-0744	[1]	SEAL-LIP TYPE
16.	198-7816	[1]	WASHER-THRUST
17.	198-7817	[1]	BUSHING (TRUNNION)
18.	198-7818	[1]	FITTING-GREASE
19.	199-0683 M	[8]	BOLT (M16X2X38-MM)
20.	198-7821	[1]	BUSHING (OUTER)
21.	198-7822	[2]	SEAL
22.	3N-4968	[2]	CONE-BEARING (UPPER)
23.	198-7824	[2]	BEARING AS (LOWER)
24.	198-7825	[2]	SEAL (KINGPIN)
25.	198-7826	[2]	SEAL (KINGPIN)
26.	198-7827	[1]	WASHER-THRUST
27.	198-7828	[1]	BUSHING (INNER)
28.	198-7829	[1]	BUSHING (OUTER)
29.	198-7830	[1]	TRUNNION-REAR
30.	198-7831	[1]	TRUNNION
31.	198-7832	[1]	SEAL
32.	199-0783 M	[8]	BOLT (M16X2X38-MM)
33.	199-0798 Y	[1]	WHEEL & FINAL DRIVE GP (RH)(RH)
34.	199-0799 Y	[1]	WHEEL & FINAL DRIVE GP (LH)(LH)
35.	198-7835 M	[2]	NUT-TIE ROD (M27X1.5-THD)
36.	198-7838	[2]	PIN (UPPER)
37.	198-7839	[2]	PIN (LOWER)
38.	198-7840 Y	[1]	DIFFERENTIAL & BEVEL GEAR GP
39.	198-7846	[1]	CYLINDER GP-STEERING
	217-2903	[1]	FLANGE
40.	214-1971	[1]	HOUSING AS
41.	229-5098	[1]	SENSOR-SPEED
42.	198-7834	[2]	TIE ROD GP
43.	5P-3864	[2]	SEAL-O-RING
44.	6D-1734	[2]	CUP-BEARING
45.	098-5747 M	[4]	NUT (M16X2-THD)
46.	198-7814	[2]	BOLT (M16X2X100-MM)
47.	199-0705	[2]	BOLT (M16X130-MM)
48.	198-7841 B	[8]	SHIM (0.15-MM THK)
49.	198-7842 B	[4]	SHIM (0.2-MM THK)
50.	198-7843 B	[8]	SHIM (0.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

200-2424: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

200-2424 AXLE GP-DRIVE & STEERING
S/N 3PN2500-UP
PART OF 200-7583 AXLE AR-REAR
Type 1
AN ATTACHMENT

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	204-5863	[1]	BOLT
2.	199-0648	[4]	NUT-JAM (M16X2-THD)
3.	198-7806	[2]	FITTING-GREASE
4.	198-7808	[1]	CAP
5.	197-9155	[1]	BREATHER
6.	198-7810	[4]	DOWEL
7.	198-7811	[3]	DOWEL
8.	198-7812	[1]	ADAPTER-BREATHER
9.	198-7813	[1]	BUSHING (INNER)
10.	198-7814	[2]	BOLT (M16X2X100-MM)
11.	198-7815	[2]	BUSHING
12.	152-6144	[1]	PLUG AS-DRAIN (MAGNETIC)(AXLE)
13.	199-0677	[12]	BOLT (M14X2X40-MM)
14.	157-0744	[1]	SEAL-LIP TYPE
15.	198-7816	[1]	WASHER-THRUST
16.	198-7817	[1]	BUSHING
17.	198-7818	[1]	FITTING-GREASE
18.	199-0683 M	[8]	BOLT (M16X2X38-MM)
19.	198-7819	[4]	BUSHING
20.	199-0705	[2]	BOLT (M16X130-MM)
21.	198-7821	[1]	BUSHING (OUTER)
22.	198-7822	[2]	SEAL
23.	198-7823	[2]	BEARING AS (UPPER)
24.	198-7824	[2]	BEARING AS (LOWER)
25.	198-7825	[2]	SEAL
26.	198-7826	[2]	SEAL
27.	198-7827	[1]	WASHER-THRUST
28.	198-7828	[1]	BUSHING
29.	198-7829	[1]	BUSHING
30.	198-7830	[1]	TRUNNION-REAR
31.	198-7831	[1]	TRUNNION
32.	198-7832	[1]	SEAL
33.	199-0783 M	[8]	BOLT (M16X2X38-MM)
34.	198-7834	[2]	TIE ROD GP
			(EACH INCLUDES)
	217-2909	[1]	TIE ROD
	217-2910	[1]	BALL JOINT
	217-2911	[1]	NUT (M28X1.5-THD)
35.	198-7835 M	[2]	NUT-TIE ROD (M27X1.5-THD)
36.	198-7836 Y	[1]	WHEEL & FINAL DRIVE GP (RH)
37.	198-7837 Y	[1]	WHEEL & FINAL DRIVE GP (LH)
38.	198-7838	[2]	PIN (UPPER)
39.	198-7839	[2]	PIN (LOWER)
40.	198-7840 Y	[1]	DIFFERENTIAL & BEVEL GEAR GP
41.	198-7841 B	[8]	SHIM (0.15-MM THK)
42.	198-7842 B	[4]	SHIM (0.2-MM THK)
43.	198-7843 B	[8]	SHIM (0.5-MM THK)
44.	199-0864	[1]	CYLINDER GP-STEERING
45.	214-1971	[1]	HOUSING AS
47.	069-4707	[1]	SEALANT (GASKET)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

200-2424: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

200-2424 AXLE GP-DRIVE & STEERING
S/N 3PN2500-UP
PART OF 200-7583 AXLE AR-REAR
Type 2
AN ATTACHMENT

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	095-0687 CM	[3]	BOLT-SOCKET HEAD (M14X2X45-MM)
2.	198-7806	[2]	FITTING-GREASE
3.	199-0651 C	[1]	FITTING-GREASE
4.	198-7808	[2]	CAP (PROTECTION)
5.	219-8795 C	[1]	CAP (PLASTIC)
6.	197-9155	[1]	BREATHER (DRIVE AXLE)
7.	198-7810	[4]	DOWEL
8.	198-7811	[2]	DOWEL
9.	198-7812	[1]	ADAPTER-BREATHER
10.	198-7813	[1]	BUSHING (INNER)
11.	198-7815	[2]	BUSHING
12.	152-6144	[1]	PLUG AS-DRAIN (MAGNETIC)(DRIVE AXLE)
	6V-6228	[1]	SEAL-O-RING
13.	199-0677 C	[13]	BOLT (M14X2X40-MM)
14.	157-0744	[1]	SEAL-LIP TYPE
15.	198-7816	[1]	WASHER-THRUST
16.	198-7817	[1]	BUSHING
17.	198-7818	[1]	FITTING-GREASE
18.	199-0683 CM	[8]	BOLT (M16X2X38-MM)
19.	198-7821	[1]	BUSHING (OUTER)
20.	198-7822	[2]	SEAL
22.	198-7824	[2]	BEARING AS (LOWER)
23.	198-7825	[2]	SEAL (KINGPIN)
24.	198-7826	[2]	SEAL (KINGPIN)
25.	198-7827	[1]	WASHER-THRUST
26.	198-7828	[1]	BUSHING (INNER)
27.	198-7829	[1]	BUSHING (OUTER)
28.	198-7830	[1]	TRUNNION-REAR
29.	198-7831	[1]	TRUNNION
30.	198-7832	[1]	SEAL
31.	199-0783 M	[8]	BOLT (M16X2X38-MM)
32.	199-0798 CY	[1]	WHEEL & FINAL DRIVE GP (RH)
33.	199-0799 CY	[1]	WHEEL & FINAL DRIVE GP (LH)
34.	198-7835 M	[2]	NUT-TIE ROD (M27X1.5-THD)
35.	198-7838	[2]	PIN (UPPER)
36.	198-7839	[2]	PIN (LOWER)
37.	198-7840 Y	[1]	DIFFERENTIAL & BEVEL GEAR GP
38.	199-0864	[1]	CYLINDER GP-STEERING
	217-2901	[1]	ROD AS
	217-2903	[1]	FLANGE
	231-0722	[1]	KIT-SEAL
			(INCLUDES SEALS)
39.	214-1971	[1]	HOUSING AS
40.	198-7834	[2]	TIE ROD GP
			(EACH INCLUDES)
	217-2909	[1]	TIE ROD
	217-2910	[1]	BALL JOINT
	295-6358 M	[1]	NUT (M28X1.5-THD)
41.	198-7841 BC	[8]	SHIM (0.15-MM THK)
42.	198-7842 BC	[4]	SHIM (0.2-MM THK)
43.	198-7843 BC	[8]	SHIM (0.5-MM THK)
44.	3N-4968	[2]	CONE-BEARING
45.	6D-1734	[2]	CUP-BEARING
46.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

168-7444: AXLE GP-FRONT

AXLE GP-FRONT

168-7444 AXLE GP-FRONT
S/N 3PN2500-UP
PART OF 197-6053 AXLE GP-FRONT

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8201 M	[3]	BOLT-SOCKET HEAD (M16X2X45-MM)
2.	198-7806	[1]	FITTING-GREASE
3.	199-0651	[1]	FITTING-GREASE
4.	133-2900	[2]	RING-RETAINING
5.	199-0656	[2]	BEARING-TAPERED ROLLER
6.	199-0663 L	[1]	SEAL-O-RING
7.	198-7808	[2]	CAP
8.	199-0667	[1]	DOWEL
9.	219-8795	[1]	CAP
10.	198-7810	[4]	DOWEL
11.	199-0670	[2]	SCREW-PURGE
12.	198-7811	[4]	DOWEL
13.	199-0672	[6]	SPACER-SPECIAL
14.	198-7813	[1]	BUSHING (INNER)
15.	198-7814	[1]	BOLT (M16X2X100-MM)
16.	198-7815	[2]	BUSHING
17.	152-6144	[2]	PLUG AS-DRAIN (MAGNETIC)(AXLE, FRONT)
			(EACH INCLUDES)
	6V-6228	[1]	SEAL-O-RING
18.	199-0675 M	[2]	NUT (M104X2-THD)
19.	199-0678 L	[2]	WASHER (45.5X55X2-MM THK)
20.	199-0680 L	[1]	SPACER (47X50X19.2-MM THK)
21.	199-0681	[6]	WASHER (6.2X16.5X2-MM THK)
22.	157-0744	[1]	SEAL-LIP TYPE
23.	198-7816	[1]	WASHER-THRUST
24.	198-7817	[1]	BUSHING
25.	198-7818	[1]	FITTING-GREASE
26.	199-0683 M	[8]	BOLT (M16X2X38-MM)
27.	199-0695 M	[2]	BOLT (M6X1X14-MM)
28.	199-0697	[1]	SEAL
29.	199-0701	[6]	COVER-BRAKE
30.	199-0702	[6]	SPRING (INNER)
31.	199-0703	[6]	SPRING (OUTER)
32.	198-7821	[1]	BUSHING (OUTER)
33.	198-7822	[2]	SEAL
34.	199-0711 L	[1]	GEAR GP-BEVEL
35.	199-0717	[1]	YOKE
36.	199-0750	[6]	DISC-BRAKE
37.	199-0752	[2]	PISTON-BRAKE
38.	199-0757	[2]	HUB-BRAKE
39.	199-0759	[2]	SEAL-O-RING
40.	199-0773	[1]	HOUSING (RH)
41.	198-7824	[2]	BEARING AS
42.	198-7825	[2]	SEAL
43.	198-7826	[2]	SEAL
44.	198-7827	[1]	WASHER-THRUST
45.	198-7828	[1]	BUSHING (INNER)
46.	198-7829	[1]	BUSHING (OUTER)
47.	198-7830	[1]	TRUNNION-REAR
48.	198-7831	[1]	TRUNNION
49.	198-7832	[1]	SEAL
50.	199-0782	[1]	BRACKET-CALIPER
51.	199-0783 M	[8]	BOLT (M16X2X38-MM)
52.	199-0785 L	[1]	WASHER (30.5X58X10-MM THK)
53.	199-0786	[8]	PLATE
54.	199-0787	[6]	PIN
55.	199-0788	[1]	HOUSING (LH)
56.	199-0798 Y	[1]	WHEEL & FINAL DRIVE GP (RH)
57.	199-0799 Y	[1]	WHEEL & FINAL DRIVE GP (LH)
58.	198-7835 M	[2]	NUT-TIE ROD (M27X1.5-THD)
59.	198-7838	[2]	PIN (UPPER)
60.	198-7839	[2]	PIN (LOWER)
61.	199-0858	[2]	RETAINER
62.	199-0864	[1]	CYLINDER GP-STEERING
	217-2901	[1]	ROD AS
	217-2903	[1]	FLANGE
	231-0722	[1]	KIT-SEAL
			(INCLUDES SEALS)
63.	199-0865	[1]	HOUSING-CENTER
64.	212-5712	[12]	BUSHING
65.	212-5702 LM	[1]	NUT (M30X2-THD)
66.	212-5713	[2]	PLUG AS
			(EACH INCLUDES)
	033-6041	[1]	SEAL-O-RING
67.	095-1041	[1]	BEARING-TAPERED ROLLER
68.	093-8828	[1]	BEARING AS
69.	212-5710 Y	[1]	DIFFERENTIAL GP
70.	238-5247	[1]	HOUSING AS-BRAKE (RH)
71.	238-5248	[1]	HOUSING AS-BRAKE (LH)
72.	3N-4968	[2]	CONE-BEARING
73.	6D-1734	[2]	CUP-BEARING
74.	6V-2315 M	[6]	BOLT (M6X1X35-MM)
75.	6V-3822 M	[6]	BOLT (M10X1.5X35-MM)
76.	1R-5396 M	[6]	BOLT (M6X1X35-MM)
77.	055-1990	[1]	VENT
78.	5P-3864	[2]	SEAL-O-RING
79.	199-0700	[2]	SEAL-O-RING
80.	198-7834	[2]	TIE ROD GP
			(EACH INCLUDES)
	217-2909	[1]	TIE ROD
	217-2910	[1]	BALL JOINT
	217-2911	[1]	NUT (M28X1.5-THD)
83.	1U-8846 B		SEALANT-GASKET
84.	250-6064 J	[1]	BRAKE GP-HYDRAULIC CALIPER
85.	4L-6454	[1]	BOLT (3/8-16X1-IN)
86.	8C-7587 M	[26]	BOLT-SOCKET HEAD (M16X2X160-MM)
87.	098-5747 M	[1]	NUT (M16X2-THD)
88.	095-0674 M	[4]	BOLT-SOCKET HEAD (M12X1.75X65-MM)
97.	198-7841 B	[8]	SHIM (0.15-MM THK)
	198-7843 B	[8]	SHIM (0.5-MM THK)
98.	198-7842 B	[4]	SHIM (0.2-MM THK)
100.	199-0684 B	[1]	SHIM (2.5-MM THK)
	199-0685 B	[1]	SHIM (2.6-MM THK)
	199-0686 B	[1]	SHIM (2.7-MM THK)
	199-0687 B	[1]	SHIM (2.8-MM THK)
	199-0688 B	[1]	SHIM (2.9-MM THK)
	199-0689 B	[1]	SHIM (3-MM THK)
	199-0690 B	[1]	SHIM (3.1-MM THK)
	199-0691 B	[1]	SHIM (3.2-MM THK)
	199-0692 B	[1]	SHIM (3.3-MM THK)
	199-0693 B	[1]	SHIM (3.4-MM THK)

			AVAILABLE REPAIR KIT(S):
	293-8751 L	[1]	KIT-BEVEL GEAR
	166-9413 J	[1]	KIT-CAM (COUNTERCLOCKWISE)
			(INCLUDES CAMS, BEARINGS & RETAINER)
	238-5272 J	[1]	KIT-BRAKE CALIPER
			(INCLUDES SLEEVES, BOLTS, WASHERS, NUTS, LINING AS & THRUST BEARING)
	238-5273 J	[1]	KIT-BRAKE LINING
			(INCLUDES LINING AS, SPRING & GREASE)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICE(S) PARTS MARKED J
	L		KIT MARKED L SERVICE(S) PARTS MARKED L
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

197-6053: AXLE GP-FRONT

AXLE GP-FRONT

197-6053 AXLE GP-FRONT
S/N 3PN2500-UP
PART OF 199-7911 POWER TRAIN AR

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-7444 Y	[1]	AXLE GP-FRONT
2.	188-3206	[1]	BRACKET AS
3.	188-3209	[1]	PLATE
4.	198-6003	[4]	BOLT (M20X2.5X280-MM)
5.	208-7492 M	[4]	NUT (M20X2.5-THD)
6.	148-8318	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8634	[1]	CONNECTOR
7.	148-8336	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
8.	148-8367	[3]	ELBOW AS
			(EACH INCLUDES)
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW (90 DEGREE)
9.	7X-2488 M	[4]	BOLT (M20X2.5X160-MM)
10.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
11.	8T-4131 M	[8]	NUT (M20X2.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

197-6047: AXLE GP-REAR

AXLE GP-REAR

197-6047 AXLE GP-REAR
S/N 3PN2500-UP
PART OF 202-4153 AXLE AR-REAR
AN ATTACHMENT

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-7445 Y	[1]	AXLE GP-DRIVE & STEERING (REAR)
2.	6V-8723	[2]	ELBOW (90 DEGREE)
	3K-0360	[2]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
3.	7X-2488 M	[4]	BOLT (M20X2.5X160-MM)
4.	8T-4123	[8]	WASHER (3.62X5.75X0.375-MM THK)
5.	8T-4131 M	[4]	NUT (M20X2.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

198-7840: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

198-7840 DIFFERENTIAL & BEVEL GEAR GP
S/N 3PN2500-UP
PART OF 168-7445, 200-2424 AXLE GP-DRIVE & STEERING
AN ATTACHMENT

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	199-0656	[2]	BEARING-TAPERED ROLLER
2.	199-0663	[1]	SEAL-O-RING
3.	152-6144	[1]	PLUG AS-DRAIN (MAGNETIC)(AXLE, REAR)
	6V-6228	[1]	SEAL-O-RING
4.	199-0675 M	[2]	NUT (M104X2-THD)
5.	199-0678	[2]	WASHER (45.5X55X2-MM THK)
6.	199-0680	[1]	SPACER (47X50X19.2-MM THK)
7.	199-0684 B	[1]	SHIM (2.5-MM THK)
8.	199-0695 M	[2]	BOLT (M6X1X14-MM)
9.	199-0697	[1]	SEAL
10.	199-0698	[1]	SLINGER
11.	199-0785	[1]	WASHER (30.5X58X10-MM THK)
12.	199-0792	[1]	GEAR SET-BEVEL
13.	199-0855	[1]	YOKE
14.	199-0858	[2]	RETAINER
15.	095-1041	[1]	BEARING-TAPERED ROLLER
16.	212-5702 M	[1]	NUT (M30X2-THD)
17.	212-5710 Y	[1]	DIFFERENTIAL GP
18.	199-0685 B	[1]	SHIM (2.6-MM THK)
	199-0686 B	[1]	SHIM (2.7-MM THK)
	199-0687 B	[1]	SHIM (2.8-MM THK)
	199-0688 B	[1]	SHIM (2.9-MM THK)
	199-0689 B	[1]	SHIM (3-MM THK)
	199-0690 B	[1]	SHIM (3.1-MM THK)
	199-0691 B	[1]	SHIM (3.2-MM THK)
	199-0692 B	[1]	SHIM (3.3-MM THK)
	199-0693 B	[1]	SHIM (3.4-MM THK)
19.	093-8828	[1]	BEARING AS
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
TH103 Telehandler

Battery Electrolyte Level - Check
TH103 Telehandler

Battery or Battery Cable - Replace
TH103 Telehandler

Fuses and Relays - Replace
TH103 Telehandler

Battery or Battery Cable - Inspect/Replace
TH103 Telehandler

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers

Service Letter-Asia

Systems Operation

Switch (Boom)
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System

Wiring Diagram
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System

Switch (Boom)
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers

Testing and Adjusting

Switch (Boom) - Test
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System

System Schematic
Machine Security System

Switch (Boom) - Adjust
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System

Electric Starting System - Test
3054 Engine

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

Electrical Component and Connector Locations
Machine Security System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Alternator Lamp Should Be Checked During Startup {1406}
1998/06/08

Correction To Operational Check And Zero Check For LSI (Type 2 System) {7455,7400,1706,1408}
1998/08/17

8I-5949 Switch Assembly Can Be Serviced By Modifying The 6R-7916 Switch {4343,7332,1435}
1999/05/10

New Frame Leveling Valve Available{5144}
1999/05/24

Access Platform Schematics For Telehandler {7566,5050}
1999/11/22

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Correction to Sender Specifications Chart on Electrical Schematic, RENR3405 {1273, 7566}
2000/07/03

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Improved Service Meter Used {7478}
2004/05/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog TH103 :

Truck sale:

CATERPILLAR TH103 2001
- TELEHANDLER
WYOMING CAT
- Casper - United States

CATERPILLAR TH103 2001
- TELEHANDLER
BLANCHARD MACHINERY

2002 CAT TH103

Iron Bound Solutions
Texas

USD $50,000

2013 CAT TH103

Brokers Laguna, S. A. de C. V.

USD $24,500

2000 CAT TH103

M. Nolan Farms
Lapeer, Michigan