AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

158-7873 LOCK GP-STEERING CYLINDER S/N 3PN2500-UP AN ATTACHMENT TH103 TELEHANDLER


STEERING SYSTEM
CYLINDER GP
STEERING COLUMN GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
CYLINDER GP

TELEHANDLER TH103 TELEHANDLER 3PN
 TH103 TELEHANDLER 3PN02500-UP (MACHINE) POWERED BY 3054 Engine SEBP3350 TH103 3PN   (1996)

STEERING SYSTEM

CYLINDER GP
158-7873 LOCK GP-STEERING CYLINDER
 

#SEBP33500250
 

158-7873: LOCK GP-STEERING CYLINDER

158-7873 LOCK GP-STEERING CYLINDER
S/N 3PN2500-UP
AN ATTACHMENT
i01144020 SEBP3350
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO SERVICEABLE PARTS
 

#SEBP33500251
 

8I-3784: STEERING COLUMN GP

8I-3784 STEERING COLUMN GP
S/N 3PN2500-UP
PART OF 197-1668 CONTROL GP-STEERING
AN ATTACHMENT
i01110753 SEBP3350
8I3784 STEERING COLUMN GP Parts scheme
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6R-7553 [1] STEERING COLUMN AS  
1A. 176-1062 [1] BEARING AS-NEEDLE  
1B. 176-1063 [1] BALL BEARING  
1C. 178-3311 [1] SEAL-LIP TYPE  
2. 8I-3785 [1] SHAFT-LOWER  
3. 6R-7559 [1] KNOB  
4. 6R-7554 [1] FILM  
5. 6R-7551 [2] JOINT AS  
6. 5I-0618 [1] BRACKET-SUPPORT  
7. 084-4078 [1] BRACKET-SUPPORT  
8. 6R-7557 M [2] BOLT-SPECIAL  
9. 5C-9553 M [2] BOLT (M6X1X16-MM)  
10. 8T-4197 M [4] BOLT (M8X1.25X40-MM)  
11. 6V-9189 M [4] LOCKNUT (M8X1.25-THD)  
12. 6R-7558 M [1] BOLT (M10X1.5X160-MM)  
13. 8T-0288 M [1] BOLT (M5X0.8X12-MM)  
14. 6V-7699 [1] WASHER-HARD (5.5X13X1.6-MM THK)  
15. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 6V-8227 M [1] NUT (M18X1.5-THD)  
  M   METRIC PART
 

#SEBP33500252
 

200-7625: CONTROL GP-PILOT OPERATED HYD

200-7625 CONTROL GP-PILOT OPERATED HYD
S/N 3PN2500-UP
AN ATTACHMENT
i01492996 SEBP3350
2007625 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-8438 [1] FILM (BOOM CONTROL)  
2. 200-8069 Y [1] LINES GP-PILOT (BOOM CONTROL)  
3. 153-3819 [1] HARNESS AS-WORK TOOL  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
4. 7K-1181 [1] STRAP-CABLE  
5. 140-9378 [3] RELAY AS (12-VOLT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33500253
 

203-3604: CONTROL GP-PILOT OPERATED HYD

203-3604 CONTROL GP-PILOT OPERATED HYD
S/N 3PN2500-UP
PART OF 213-6821, 213-6824 PLATFORM AR
FOR USE WITH PLATFORM ARRANGEMENT-ACCESS
AN ATTACHMENT
i01493665 SEBP3350
2033604 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-8438 [1] FILM (BOOM CONTROL)  
2. 203-3606 Y [1] LINES GP-PILOT (BOOM CONTROL)  
3. 153-3819 [1] HARNESS AS-WORK TOOL  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
4. 7K-1181 [1] STRAP-CABLE  
5. 140-9378 [3] RELAY AS (12-VOLT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33500254
 

173-2445: CYLINDER & MTG GP-COMPENSATING

173-2445 CYLINDER & MTG GP-COMPENSATING
S/N 3PN2500-UP
PART OF 197-9718 BOOM AR
AN ATTACHMENT
i01320349 SEBP3350
1732445 CYLINDER & MTG GP-COMPENSATING Parts scheme
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-8013 Y [2] CYLINDER GP-COMPENSATING  
2. 168-9869 [4] PIN AS  
3. 089-7338 [4] SLEEVE  
4. 8T-4222 [4] WASHER-PLATED (11X32X2.5-MM THK)  
5. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
6. 124-6696 [4] ADAPTER  
    (EACH INCLUDES)
  5C-6266 [1] BOLT (5/8-11X1-IN)  
7. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
8. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33500255
 

148-7827: CYLINDER & MTG GP-COUPLER

148-7827 CYLINDER & MTG GP-COUPLER
S/N 3PN2500-UP
PART OF 165-3900 COUPLER AR-QUICK
AN ATTACHMENT
i01660984 SEBP3350
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  188-0563 Y [1] CYLINDER GP-COUPLER  
    -OR-
  190-3085 Y [1] CYLINDER GP-COUPLER  
   
  6W-5760 [2] DOWEL  
  6W-5761 [2] PIN  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33500256
 

209-8350: CYLINDER & MTG GP-COUPLER

209-8350 CYLINDER & MTG GP-COUPLER
S/N 3PN2500-2777
PART OF 219-4580 COUPLER GP-QUICK
AN ATTACHMENT
i01671712 SEBP3350
2098350 CYLINDER & MTG GP-COUPLER Parts scheme
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-5761 [2] PIN  
2. 164-3512 [1] PLATE  
3. 188-0563 Y [1] CYLINDER GP-COUPLER  
4. 6W-5760 [2] DOWEL  
5. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33500257
 

209-8350: CYLINDER & MTG GP-COUPLER

209-8350 CYLINDER & MTG GP-COUPLER
S/N 3PN2778-UP
PART OF 219-4580 COUPLER GP-QUICK
AN ATTACHMENT
i01699682 SEBP3350
2098350 CYLINDER & MTG GP-COUPLER Parts scheme
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-5761 [2] PIN  
2. 164-3512 [1] PLATE  
3. 190-3085 CY [1] CYLINDER GP-COUPLER  
4. 6W-5760 [2] DOWEL  
5. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33500258
 

197-9726: CYLINDER & MTG GP-TELESCOPING

197-9726 CYLINDER & MTG GP-TELESCOPING
S/N 3PN2500-UP
PART OF 197-9720 CHAIN GP-BOOM
AN ATTACHMENT
i01488689 SEBP3350
1979726 CYLINDER & MTG GP-TELESCOPING Parts scheme
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5301 [2] PIN-COTTER  
2. 6L-4725 [4] CLAMP-HOSE  
3. 217-0530 [1] TRAY AS  
4. 8I-6495 [1] BRACKET AS  
5. 081-5551 [4] STRIP-RUBBER  
6. 081-5733 [1] PULLEY  
7. 081-5734 [2] SPACER  
8. 089-7324 [1] ROLLER  
9. 089-7334 [1] SHAFT-ROLLER  
10. 089-7335 [2] BUSHING  
11. 089-7336 [1] SHAFT AS  
12. 089-7338 [1] SLEEVE  
13. 197-9725 Y [1] CYLINDER GP-TELESCOPING  
14. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
15. 8T-3282 [2] WASHER-HARD (22X35X3.5-MM THK)  
16. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
17. 8T-4222 [1] WASHER-PLATED (11X32X2.5-MM THK)  
18. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
19. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33500259
 

184-4897: CYLINDER & VALVE GP-STABILIZER

184-4897 CYLINDER & VALVE GP-STABILIZER
S/N 3PN2500-UP
PART OF 179-8141 STABILIZER GP
AN ATTACHMENT
i01324529 SEBP3350
1844897 CYLINDER & VALVE GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your TH103 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-3829 [1] VALVE GP-LOAD CONTROL  
  119-3435 [2] SEAL-O-RING  
  119-3970 [1] VALVE-CHECK  
2. 179-6710 I [1] HOSE AS  
3. 179-6712 [1] LINES GP-STABILIZER  
  6V-8397 [1] SEAL-O-RING  
  166-7284 [1] COUPLING AS  
  179-6710 I [1] HOSE AS  
4. 184-4896 Y [1] CYLINDER GP-STABILIZER  
5. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
6. 7X-0818 M [3] BOLT (M8X1.25X45-MM)  
7. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Steering Cylinder
TH103 MACHINE SYSTEMS DISASSEMBLY AND ASSEMBLY
Steering Tie Rod
TH103 MACHINE SYSTEMS DISASSEMBLY AND ASSEMBLY
Steering Pivot
TH103 MACHINE SYSTEMS DISASSEMBLY AND ASSEMBLY
Steering Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Steering Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Service Magazine
Service Parts Are Now Available For Telehandler Steering Arm Groups {4305}
1999/09/13
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog TH103 :

LINES GP-STEERING
184-0712 LINES GP-STEERING
CONTROL GP-STEERING
207-7339 CONTROL GP-STEERING
CONTROL GP-STEERING
197-1668 CONTROL GP-STEERING
LINES GP-SERVICE BRAKE
203-4527 LINES GP-SERVICE BRAKE
LINES GP-SERVICE BRAKE
191-1416 LINES GP-SERVICE BRAKE
LINES GP-BRAKE
166-7899 LINES GP-BRAKE
LEVER GP-HAND CONTROL
163-0753 LEVER GP-HAND CONTROL
CYLINDER GP-BRAKE
190-5929 CYLINDER GP-BRAKE
STEERING COLUMN GP
8I-3784 STEERING COLUMN GP
CONTROL GP-PILOT OPERATED HYD
200-7625 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
203-3604 CONTROL GP-PILOT OPERATED HYD
CYLINDER & MTG GP-COMPENSATING
173-2445 CYLINDER & MTG GP-COMPENSATING
148-7827 CYLINDER & MTG GP-COUPLER
CYLINDER & MTG GP-COUPLER
209-8350 CYLINDER & MTG GP-COUPLER
CYLINDER & MTG GP-COUPLER
209-8350 CYLINDER & MTG GP-COUPLER
CYLINDER & MTG GP-TELESCOPING
197-9726 CYLINDER & MTG GP-TELESCOPING

Truck sale:

CATERPILLAR TH103 2001
 
CATERPILLAR TH103 2001
- TELEHANDLER
WYOMING CAT
- Casper - United States
CATERPILLAR TH103 2001
 
CATERPILLAR TH103 2001
- TELEHANDLER
BLANCHARD MACHINERY
 
 
2002 CAT TH103

Iron Bound Solutions
Texas
2013 CAT TH103
USD $50,000 
2013 CAT TH103

Brokers Laguna, S. A. de C. V.
2000 CAT TH103
USD $24,500 
2000 CAT TH103

M. Nolan Farms
Lapeer, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.