HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC SYSTEM
CYLINDER GP
#SEBP33500260
207-7843: CYLINDER & VALVE GP-STABILIZER
207-7843 CYLINDER & VALVE GP-STABILIZER
S/N 3PN2500-UP
PART OF 207-7842 STABILIZER GP
AN ATTACHMENT
S/N 3PN2500-UP
PART OF 207-7842 STABILIZER GP
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 131-9203 | [1] | SWITCH AS-PRESSURE | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 2. | 179-6710 I | [1] | HOSE AS | |
| 3. | 179-6712 Y | [1] | LINES GP-STABILIZER | |
| 4. | 184-4896 Y | [1] | CYLINDER GP-STABILIZER | |
| 5. | 205-7555 | [1] | PLATE AS | |
| 6. | 205-7999 | [1] | VALVE GP-CONTROL | |
| 119-3970 | [1] | VALVE-CHECK | ||
| 119-3435 | [2] | SEAL-O-RING | ||
| 119-3969 | [1] | VALVE-COUNTERBALANCE | ||
| 7. | 148-8318 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8634 | [1] | CONNECTOR | ||
| 8. | 3J-1907 | [1] | SEAL-O-RING | |
| 9. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 8T-6869 M | [3] | BOLT (M8X1.25X60-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33500261
214-7408: CYLINDER & VALVE GP-STABILIZER
214-7408 CYLINDER & VALVE GP-STABILIZER
S/N 3PN2500-UP
PART OF 207-7842 STABILIZER GP
AN ATTACHMENT
S/N 3PN2500-UP
PART OF 207-7842 STABILIZER GP
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 131-9203 | [1] | SWITCH AS-PRESSURE | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 2. | 179-6710 I | [1] | HOSE AS | |
| 3. | 184-4896 Y | [1] | CYLINDER GP-STABILIZER | |
| 4. | 205-7555 | [1] | PLATE AS | |
| 5. | 205-7999 | [1] | VALVE GP-CONTROL | |
| 119-3970 | [1] | VALVE-CHECK | ||
| 119-3435 | [2] | SEAL-O-RING | ||
| 119-3969 | [1] | VALVE-COUNTERBALANCE | ||
| 6. | 214-6821 | [1] | HOSE AS | |
| 6V-8397 | [1] | SEAL-O-RING (10.21MM ID) | ||
| 166-7284 | [1] | COUPLING AS | ||
| 214-6814 I | [1] | HOSE AS | ||
| 7. | 148-8318 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8634 | [1] | CONNECTOR | ||
| 8. | 3J-1907 | [1] | SEAL-O-RING (11.89MM ID) | |
| 9. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 8T-6869 M | [3] | BOLT (M8X1.25X60-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33500262
191-1415: CYLINDER GP-BOOM
191-1415 CYLINDER GP-BOOM
S/N 3PN2500-UP
PART OF 191-1413, 197-7793 BOOM & CHASSIS AR
AN ATTACHMENT
S/N 3PN2500-UP
PART OF 191-1413, 197-7793 BOOM & CHASSIS AR
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 4U-1697 | [1] | ADAPTER-BULKHEAD | |
| 3. | 5B-3254 | [1] | NUT-JAM (7/16-20-THD) | |
| 4. | 8I-6381 | [1] | PIN | |
| 5. | 089-7338 | [1] | SLEEVE | |
| 6. | 118-7763 | [1] | PIN AS | |
| 7. | 136-5791 | [1] | HOSE AS | |
| 8. | 188-3210 | [2] | PLATE | |
| 9. | 202-1139 Y | [1] | CYLINDER GP-BOOM | |
| 10. | 2N-1287 | [1] | ELBOW-FLARED | |
| 11. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 12. | 7X-0397 | [2] | BOLT (7/8-9X9-IN) | |
| 13. | 7X-0449 | [2] | NUT-FULL (7/8-9-THD) | |
| 14. | 7X-2569 M | [2] | BOLT (M20X2.5X200-MM) | |
| 15. | 8C-6913 | [2] | WASHER-HARD (24X41.5X4-MM THK) | |
| 16. | 8T-3282 | [2] | WASHER-HARD (22X35X3.5-MM THK) | |
| 17. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4222 | [1] | WASHER-PLATED (11X32X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33500263
202-1139: CYLINDER GP-BOOM
202-1139 CYLINDER GP-BOOM
S/N 3PN2500-UP
PART OF 191-1415 CYLINDER GP-BOOM
AN ATTACHMENT
S/N 3PN2500-UP
PART OF 191-1415 CYLINDER GP-BOOM
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS#SEBP33500264
8I-6093: CYLINDER GP-BOOM
8I-6093 CYLINDER GP-BOOM
S/N 3PN2500-UP
160MM BORE X 1714MM STROKE
PART OF 202-1139 CYLINDER GP-BOOM
AN ATTACHMENT
S/N 3PN2500-UP
160MM BORE X 1714MM STROKE
PART OF 202-1139 CYLINDER GP-BOOM
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-5038 | [1] | PISTON | |
| 2. | 137-5053 J | [1] | SEAL-O-RING | |
| 3. | 137-5052 J | [1] | RING-GUIDE | |
| 4. | 137-5051 J | [1] | SEAL-PISTON | |
| 5. | 137-5050 J | [1] | SCREW | |
| 6. | 137-8451 | [1] | SPACER | |
| 7. | 137-5049 J | [1] | SEAL-O-RING | |
| 8. | 169-1520 | [1] | WASHER (8.56X15.88X2.85-MM THK) | |
| 9. | 169-1516 | [1] | PLUG | |
| 10. | 169-1521 | [1] | WASHER (14.96X23.8X2.85-MM THK) | |
| 11. | 137-5048 | [1] | TUBE AS | |
| 12. | 138-3164 J | [1] | SEAL-O-RING | |
| 13. | 137-5046 J | [1] | RING-BACKUP | |
| 14. | 137-5045 J | [1] | SEAL | |
| 15. | 137-5044 | [1] | COVER | |
| 16. | 137-5043 J | [1] | SEAL-O-RING | |
| 17. | 137-5042 J | [1] | RING-GUIDE | |
| 18. | 137-5041 J | [1] | WIPER | |
| 19. | 137-5040 | [1] | ROD AS-PISTON | |
| 8Q-5938 | [1] | SCREW-SPECIAL | ||
| 20. | 8Q-5902 | [1] | PLATE-WARNING (CYLINDER ASSEMBLY) | |
| 21. | 2U-1516 | [1] | PLUG | |
| 22. | 137-5039 | [2] | BEARING | |
| 23. | 8Q-5941 | [1] | SCREW | |
| 24. | 3B-8488 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 137-5711 J | [1] | KIT-SEAL | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP33500265
166-8013: CYLINDER GP-COMPENSATING
166-8013 CYLINDER GP-COMPENSATING
S/N 3PN2500-UP
90MM BORE X 351MM STROKE
PART OF 173-2445 CYLINDER & MTG GP-COMPENSATING
AN ATTACHMENT
S/N 3PN2500-UP
90MM BORE X 351MM STROKE
PART OF 173-2445 CYLINDER & MTG GP-COMPENSATING
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6734 J | [1] | SEAL-O-RING | |
| 2. | 8Q-5883 J | [1] | SCREW (6X0.5-IN) | |
| 3. | 8Q-5993 J | [1] | RING-LOCK | |
| 4. | 8Q-5995 J | [1] | SEAL | |
| 5. | 183-5708 J | [1] | SEAL-O-RING | |
| 6. | 183-5711 | [1] | CYLINDER AS | |
| 7. | 183-5718 | [1] | ROD AS | |
| 8. | 183-5722 | [1] | HEAD | |
| 9. | 183-5751 | [1] | PISTON | |
| 10. | 184-3461 J | [1] | RING-GUIDE | |
| 11. | 184-3470 J | [1] | SEAL | |
| 12. | 188-2423 | [2] | BEARING | |
| 13. | 189-6073 J | [1] | RING-BACKUP | |
| 14. | 5W-9437 J | [1] | SEAL-O-RING | |
| 15. | 8Q-5998 J | [1] | SEAL-WIPER | |
| 16. | 8T-9599 | [4] | RING-RETAINING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 188-3880 J | [1] | KIT-SEAL | ||
| (INCLUDES SCREW, SEALS, & RINGS) | ||||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP33500266
188-0563: CYLINDER GP-COUPLER
188-0563 CYLINDER GP-COUPLER
S/N 3PN2500-2777
50.8-MM (2-IN) BORE X 231.6-MM (9.1-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
Type 1
AN ATTACHMENT
S/N 3PN2500-2777
50.8-MM (2-IN) BORE X 231.6-MM (9.1-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-3893 | [2] | ROD | |
| 2. | 183-1404 | [1] | VALVE GP-CHECK (COUPLER CYLINDER) | |
| 3J-1907 F | [1] | SEAL-O-RING | ||
| 9S-8004 F | [1] | PLUG (9/16-18-THD) | ||
| 198-1877 F | [1] | PLUG AS | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 180-9872 | [1] | KIT-SEAL (COUPLER CYLINDER) | ||
| (INCLUDES LOCKNUT, TEFLON PISTON SEAL, PISTON O-RING, O-RING SEALS, BACK-UP RING, SQUARE WIRE RETAINER, U-CUP SEAL) | ||||
| F | NOT SHOWN | |||
#SEBP33500267
188-0563: CYLINDER GP-COUPLER
188-0563 CYLINDER GP-COUPLER
S/N 3PN2500-2777
50.8-MM (2-IN) BORE X 231.6-MM (9.1-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
Type 2
AN ATTACHMENT
S/N 3PN2500-2777
50.8-MM (2-IN) BORE X 231.6-MM (9.1-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS#SEBP33500268
190-3085: CYLINDER GP-COUPLER
190-3085 CYLINDER GP-COUPLER
S/N 3PN2778-UP
51-MM (2-IN) BORE X 158-MM (6.22-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
S/N 3PN2778-UP
51-MM (2-IN) BORE X 158-MM (6.22-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-3893 | [2] | ROD | |
| 2. | 190-3611 | [1] | VALVE AS-CHECK (COUPLER CYLINDER) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 180-9872 | [1] | KIT-SEAL (COUPLER CYLINDER) | ||
| (INCLUDES LOCKNUTS, PISTON SEALS, O-RINGS, BACKUP RINGS, O-RING SEALS, U-CUP SEALS, WIPER SEALS, | ||||
| INSTALLATION RINGS & WIRE RETAINERS) | ||||
#SEBP33500269
137-5871: CYLINDER GP-FRAME LEVELING
137-5871 CYLINDER GP-FRAME LEVELING
S/N 3PN2500-UP
PART OF 125-2462 LEVELING GP-FRAME
S/N 3PN2500-UP
PART OF 125-2462 LEVELING GP-FRAME
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISInformation:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Field Installation of the Conversion Arrangement for the Stabilizers
Field Installation of the Conversion Arrangement for the Stabilizers
Field Installation of the Conversion Arrangement for the Stabilizers
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Frame Leveling Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Stabilizer Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Telescoping Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Compensating Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Service Magazine
Correction to Disassembly and Assembly , "Compensating Cylinder - Disassemble and Assemble" {5816}
2002/07/22
2002/07/22
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
