BASIC ENGINE
DAMPER GPHOUSING GP-FLYWHEEL
GEAR GP
CRANKSHAFT GP
BASIC ENGINE
DAMPER GP
#SEBP33510090
209-3646: GUARD GP-DAMPER
209-3646 GUARD GP-DAMPER
MOLDED PLASTIC
FOR USE WITH 16 INCH OD DAMPER
AN ATTACHMENT
MOLDED PLASTIC
FOR USE WITH 16 INCH OD DAMPER
AN ATTACHMENT
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS#SEBP33510091
254-6038: GUARD GP-DAMPER
254-6038 GUARD GP-DAMPER
FOR USE WITH SIX GROOVE PULLEY, 16 INCH DAMPER, ALTERNATOR MOUNTING OFF OF THE FRONT HOUSING ON THE MARINE ENGINES
AN ATTACHMENT
FOR USE WITH SIX GROOVE PULLEY, 16 INCH DAMPER, ALTERNATOR MOUNTING OFF OF THE FRONT HOUSING ON THE MARINE ENGINES
AN ATTACHMENT
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 350-7770 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 2. | 352-9715 | [1] | GUARD AS-ALTERNATOR | |
| 254-6037 | [1] | GUARD | ||
| 3. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 4. | 351-2247 | [3] | BOLT (3/8-16X1.5-IN) | |
| 5. | 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 6. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) |
#SEBP33510092
254-6039: GUARD GP-DAMPER
254-6039 GUARD GP-DAMPER
FOR USE WITH 16 INCH DAMPER, ALTERNATOR MOUNTING OFF OF THE FRONT HOUSING ON THE MARINE ENGINES
AN ATTACHMENT
FOR USE WITH 16 INCH DAMPER, ALTERNATOR MOUNTING OFF OF THE FRONT HOUSING ON THE MARINE ENGINES
AN ATTACHMENT
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 350-7770 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 2. | 352-9716 | [1] | GUARD AS-ALTERNATOR | |
| 254-6022 | [1] | GUARD | ||
| 3. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 4. | 351-2247 | [3] | BOLT (3/8-16X1.5-IN) | |
| 5. | 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 6. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) |
#SEBP33510093
278-1322: GUARD GP-DAMPER
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8R-8088 | [4] | SPACER (11.66X15.88X18-MM THK) | |
| 2. | 278-1327 | [1] | GUARD | |
| 3. | 279-5063 | [1] | BRACKET | |
| 4. | 279-5064 | [1] | BRACKET AS | |
| 5. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 6. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 7. | 2A-2677 | [2] | SPACER (10.7X17.14X19.05-MM THK) | |
| 8. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 9. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 11. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 5S-7383 | [2] | BOLT (3/8-16X1.75-IN) | |
| 13. | 6V-8801 | [2] | NUT (3/8-16-THD) |
#SEBP33510094
278-1323: GUARD GP-DAMPER
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8R-8088 | [4] | SPACER (11.66X15.88X18-MM THK) | |
| 2. | 278-1328 | [1] | GUARD | |
| 3. | 279-5063 | [1] | BRACKET | |
| 4. | 279-5064 | [1] | BRACKET AS | |
| 5. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 6. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 7. | 2A-2677 | [2] | SPACER (10.7X17.14X19.05-MM THK) | |
| 8. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 9. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 11. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 5S-7383 | [2] | BOLT (3/8-16X1.75-IN) | |
| 13. | 6V-8801 | [2] | NUT (3/8-16-THD) |
#SEBP33510095
198-1295: HOUSING GP-FLYWHEEL
198-1295 HOUSING GP-FLYWHEEL
S/N CKH1-2173
FOR USE WITH @@@@@196-0220@@@@@
AN ATTACHMENT
S/N CKH1-2173
FOR USE WITH @@@@@196-0220@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5F-0304 | [1] | PLUG (FLYWHEEL HOUSING) | |
| 2. | 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(FLYWHEEL HOUSING) | |
| 3. | 159-3955 | [1] | SEAL | |
| 4. | 169-4703 | [1] | SEAL | |
| 5. | 198-1294 | [1] | HOUSING-FLYWHEEL | |
| 6. | 165-3929 | [8] | BOLT (3/8-16X1.5-IN)(MARKED X) | |
| 7. | 165-3931 | [5] | BOLT (3/8-16X1.75-IN)(MARKED Y) | |
| 8. | 165-3934 | [2] | BOLT (3/8-16X2.75-IN) | |
| 9. | 2A-1162 | [1] | GASKET | |
| 10. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN)(MARKED Z) | |
| 11. | 5M-2894 | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 7X-7731 | [4] | PLUG-PIPE (3/4-14-THD) | |
| 14. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) |
#SEBP33510096
198-1295: HOUSING GP-FLYWHEEL
198-1295 HOUSING GP-FLYWHEEL
S/N PLE1-UP; CKH2174-UP
FOR USE WITH @@@@@196-0220@@@@@
ALSO AN ATTACHMENT
S/N PLE1-UP; CKH2174-UP
FOR USE WITH @@@@@196-0220@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5F-0304 | [1] | PLUG (FLYWHEEL HOUSING) | |
| 2. | 319-0785 Y | [1] | SEAL GP-CRANKSHAFT (REAR)(REAR FLYWHEEL HOUSING) | |
| 3. | 268-5589 C | [1] | SEAL | |
| 4. | 268-5582 C | [1] | SEAL | |
| 5. | 198-1294 | [1] | HOUSING-FLYWHEEL | |
| 6. | 165-3929 | [7] | BOLT (3/8-16X1.5-IN)(MARKED X) | |
| 7. | 165-3931 | [6] | BOLT (3/8-16X1.75-IN)(MARKED Y) | |
| 8. | 165-3934 | [2] | BOLT (3/8-16X2.75-IN) | |
| 9. | 2A-1162 | [1] | GASKET | |
| 10. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN)(MARKED Z) | |
| 11. | 5M-2894 | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 7X-7731 | [4] | PLUG-PIPE (3/4-14-THD) | |
| 14. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 15. | 7G-1239 | [1] | SPACER (10.5X19X4.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33510097
206-1211: HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
S/N CKH1-1505
PROVIDES FRONT HOUSING WITH BOLTS REMOVED FOR FUEL LINES AND HEAT EXCHANGER BRACKET AT THE TOP REAR OF THE FRONT HOUSING
AN ATTACHMENT
S/N CKH1-1505
PROVIDES FRONT HOUSING WITH BOLTS REMOVED FOR FUEL LINES AND HEAT EXCHANGER BRACKET AT THE TOP REAR OF THE FRONT HOUSING
AN ATTACHMENT
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-3968 | [1] | BRACKET-SUPPORT | |
| 2. | 101-3120 | [2] | SPACER (10.5X25X20-MM THK) | |
| 3. | 120-9243 | [2] | STUD-SPECIAL (BRAKE) | |
| 4. | 126-1757 | [7] | WASHER (10.85X19.3X1.27-MM THK) | |
| 5. | 129-5427 | [2] | WASHER-SPECIAL (SEALING) | |
| 6. | 129-5428 | [12] | STUD (BRAKE) | |
| 7. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 8. | 158-8881 | [1] | PLATE | |
| 9. | 166-9144 | [1] | GASKET | |
| 10. | 175-1483 | [1] | HOUSING AS-FRONT | |
| 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | ||
| 11. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 12. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 13. | 0S-1588 | [7] | BOLT (3/8-16X1.25-IN)(MARKED X) | |
| 14. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 15. | 0T-0055 | [9] | BOLT (3/8-16X4.25-IN) | |
| 16. | 5M-2894 | [30] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 18. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 19. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| 20. | 9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP33510098
206-1211: HOUSING GP-FRONT
206-1211 HOUSING GP-FRONT
S/N PLE1-UP; CKH1506-UP
PROVIDES FRONT HOUSING WITH BOLTS REMOVED FOR FUEL LINES AND HEAT EXCHANGER BRACKET AT THE TOP REAR OF THE FRONT HOUSING
ALSO AN ATTACHMENT
S/N PLE1-UP; CKH1506-UP
PROVIDES FRONT HOUSING WITH BOLTS REMOVED FOR FUEL LINES AND HEAT EXCHANGER BRACKET AT THE TOP REAR OF THE FRONT HOUSING
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-3968 | [1] | BRACKET-SUPPORT | |
| 2. | 101-3120 | [2] | SPACER (10.5X25X20-MM THK) | |
| 3. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 4. | 166-9144 | [1] | GASKET | |
| 5. | 175-1483 | [1] | HOUSING AS-FRONT | |
| 5A. | 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | |
| 6. | 353-9979 Y | [1] | PLATE AS-FRONT HOUSING | |
| 7. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 8. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 9. | 0S-1588 | [7] | BOLT (3/8-16X1.25-IN)(MARKED X) | |
| 10. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 11. | 0T-0055 C | [5] | BOLT (3/8-16X4.25-IN) | |
| 12. | 5M-2894 C | [28] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 14. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 15. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33510099
243-6718: KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your C18 MARINE ENGINE:
CATERPILLAR SISInformation:
BASIC ENGINE
DAMPER GP
Operation and Maintenance Manual
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Truck/Ag/Marine
Specifications
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TORQUEING THE FASTENERS THAT ATTACH THE FRONT PULLEY TO THE DAMPER ON CERTAIN 3406E, C15, AND C18 ENGINES
Testing and Adjusting
Disassembly and Assembly
Caterpillar Parts SIS Catalog C18 :
Truck sale:
34,700
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
34,800
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
32,850
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
36,800
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates