AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

157-0955 GEAR GP-OUTPUT TRANSFER S/N A1A1-UP; LMP1-UP PART OF 191-2351, 214-9075 TRANSMISSION AR 950G II


POWER TRAIN
GEAR GP
AXLE GP
KIT
COOLER GP

WHEEL LOADER 950G II WHEEL LOADER AYB
 950G II Wheel Loader AYB00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3352 950G II AYB   (1999)

POWER TRAIN

GEAR GP
GEAR GP-OUTPUT TRANSFER
114-8947 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
114-8947 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
157-0955 GEAR GP-OUTPUT TRANSFER
 

#SEBP33520380
 

157-0955: GEAR GP-OUTPUT TRANSFER

157-0955 GEAR GP-OUTPUT TRANSFER
S/N A1A1-UP; LMP1-UP
PART OF 191-2351, 214-9075 TRANSMISSION AR
i01831020 SEBP3352
1570955 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-5052 [1] CASE-TRANSFER  
2. 6T-7061 [1] EYE-LIFTING  
3. 6V-4248 M [27] BOLT (M10X1.5X25-MM)  
4. 4S-8603 [1] SCREEN GP-MAGNETIC  
5. 4S-8598 [1] SCREEN-SUCTION  
6. 8P-3251 [1] COVER AS  
  8P-1722 [1] COVER  
6A. 7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
6B. 7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
7. 8H-7521 [1] SEAL-O-RING  
8. 8T-0375 M [1] BOLT (M16X2X45-MM)  
9. 7S-8554 [1] SEAL-O-RING  
10. 125-3375 [1] GEAR-TRANSFER (68-TEETH)  
11. 5P-0891 [2] CONE-BEARING  
12. 5P-0890 [2] CUP-BEARING  
13. 157-5547 [1] SHAFT-OUTPUT  
14. 2P-8987 [2] CONE-BEARING  
15. 2P-8986 [2] CUP-BEARING  
16. 115-0527 [1] CAGE-BEARING  
17. 5F-3144 [1] SEAL-O-RING  
18. 8T-0358 M [2] BOLT (M16X2X90-MM)  
19. 138-1509 C [1] DRAIN GP-ECOLOGY (POWER TRAIN OIL)  
19A. 8F-0212 [1] SEAL-O-RING  
19B. 7M-8485 [1] SEAL-O-RING  
  138-1510 [1] PLUG  
21. 125-3376 [1] GEAR-TRANSFER (74-TEETH)  
22. 9G-6258 [2] COVER-TRANSMISSION  
23. 9G-6257 [2] GASKET-COVER  
24. 6V-6317 M [12] BOLT (M10X1.5X20-MM)  
25. 3J-0634 [1] SEAL-O-RING  
26. 6I-8496 [1] CAGE-BEARING  
27. 6I-8497 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
28. 9X-7743 [2] SEAL-LIP TYPE  
29. 115-1326 [1] YOKE AS  
29A. 7S-8158 [1] GUARD  
30. 155-1634 [2] RETAINER  
31. 2H-3088 [2] SEAL-O-RING  
32. 3E-4353 [10] WASHER-HARD (11X25X3-MM THK)  
33. 188-5149 [1] CAGE AS-BEARING  
33A. 8T-5414 M [4] STUD (M12X1.75X50-MM)  
34. 188-5046 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
35. 2N-7006 [1] COVER  
36. 2N-7007 [1] GASKET  
37. 6V-8149 M [4] NUT (M12X1.75-THD)  
38. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.1)  
38A. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.2)  
39. 200-1315 Y [1] BRAKE GP-PARKING  
40. 6V-5686 M [4] BOLT (M16X2X50-MM)  
41. 155-5609 [1] DRUM  
42. 7X-0622 [8] WASHER (13X24X2.5-MM THK)  
43. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
44. 129-6329 [1] LEVER  
45. 191-1831 [1] YOKE  
46. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
47. 115-4783 [1] TUBE AS  
48. 2H-3927 [1] SEAL-O-RING  
49. 1H-9696 [1] SEAL-O-RING  
50. 110-7453 [1] TUBE AS  
51. 3H-2652 [1] SEAL-O-RING  
52. 9G-5127 [1] BREATHER (ATMOSPHERIC)(TRANSMISSION)  
53. 6V-8197 M [1] BOLT (M12X1.75X40-MM)  
54. 6V-5696 M [1] BOLT (M12X1.75X80-MM)  
55. 6V-1820 M [10] BOLT (M10X1.5X30-MM)  
57. 1H-8720 [1] SEAL-O-RING  
59. 6V-0852 [1] CAP-DUST  
60. 3J-1907 [1] SEAL-O-RING  
61. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
62. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
63. 1V-6341 [2] SEAL  
64. 9H-1024 [4] WASHER-HARD (17X30X6-MM THK)  
65. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520381
 

112-0769: HOUSING GP-FIXED AXLE

112-0769 HOUSING GP-FIXED AXLE
S/N AYB1-402
PART OF 112-0768, 126-7843, 138-3122 AXLE AR-FIXED
i01067032 SEBP3352
1120769 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5315 [2] SEAL GP-DUO-CONE  
2. 6Y-2538 [2] CONE-BEARING  
3. 2P-1373 [2] CUP-BEARING  
4. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
5. 5H-3701 [2] SCREW-PURGE  
6. 143-4907 [1] HOUSING AS-FIXED  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
7. 1U-8846 B SEALANT-GASKET (28ML)  
8. 9C-8421 [2] SHAFT-AXLE  
9. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
10. 9X-2027 [6] WASHER (11X18X2-MM THK)  
11. 6V-5686 M [10] BOLT (M16X2X50-MM)  
12. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
13. 8T-0336 [1] FITTING-PRESSURE RELIEF  
14. 4H-6520 [1] SEAL-O-RING  
15. 9C-6021 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
16. 9C-9193 [1] HOUSING-PINION  
17. 4E-8534 [1] RETAINER-SEAL  
18. 123-4003 [1] SEAL-LIP TYPE  
19. 9C-6041 [3] DOWEL  
20. 9X-6493 M [24] BOLT (M16X2X180-MM)  
21. 127-5092 [2] HOUSING-AXLE  
22. 5P-4484 [1] PLUG-MAGNETIC  
23. 3B-0551 [1] PLUG-PIPE  
24. 6C-5304 M [24] BOLT (M16X2X110-MM)  
25. 7M-8485 [3] SEAL-O-RING  
26. 9S-4181 [2] PLUG (1-5/16-12-THD)  
27. 5P-3119 [2] RING-RETAINING  
28. 9C-8419 [2] NUT-BEARING  
29. 8B-6342 [2] CONE-BEARING  
30. 8B-6343 [2] CUP-BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP33520382
 

112-0769: HOUSING GP-FIXED AXLE

112-0769 HOUSING GP-FIXED AXLE
S/N AYB1-402
PART OF 112-0768, 138-3122 AXLE AR-FIXED
i01740192 SEBP3352
1120769 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5315 [2] SEAL GP-DUO-CONE  
2. 6Y-2538 [2] CONE-BEARING  
3. 2P-1373 [2] CUP-BEARING  
4. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
5. 5H-3701 [2] SCREW-PURGE  
6. 192-9121 [1] HOUSING AS  
  095-0673 CM [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
7. 1U-8846 B SEALANT-GASKET (28ML)  
8. 9C-8421 [2] SHAFT-AXLE  
9. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
10. 9X-2027 [6] WASHER (11X18X2-MM THK)  
11. 6V-5686 M [10] BOLT (M16X2X50-MM)  
12. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
13. 8T-0336 [1] FITTING-PRESSURE RELIEF  
14. 4H-6520 [1] SEAL-O-RING  
15. 9C-6021 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
16. 9C-9193 [1] HOUSING-PINION  
17. 4E-8534 [1] RETAINER-SEAL  
18. 123-4003 [1] SEAL-LIP TYPE  
19. 9C-6041 [3] DOWEL  
20. 9X-6493 M [24] BOLT (M16X2X180-MM)  
21. 127-5092 [2] HOUSING-AXLE  
22. 5P-4484 [1] PLUG-MAGNETIC  
23. 3B-0551 [1] PLUG-PIPE  
24. 6C-5304 M [24] BOLT (M16X2X110-MM)  
25. 7M-8485 C [4] SEAL-O-RING  
26. 9S-4181 [2] PLUG (1-5/16-12-THD)  
27. 5P-3119 [2] RING-RETAINING  
28. 9C-8419 [2] NUT-BEARING  
29. 8B-6342 [2] CONE-BEARING  
30. 8B-6343 [2] CUP-BEARING  
31. 9S-9334 C [1] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP33520383
 

214-6156: HOUSING GP-FIXED AXLE

214-6156 HOUSING GP-FIXED AXLE
S/N AYB403-UP
PART OF 214-6161, 214-9398, 214-9402 AXLE AR-FIXED
i01789427 SEBP3352
2146156 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-8534 [1] RETAINER-SEAL  
2. 5H-3701 [2] SCREW-PURGE  
3. 8T-0336 [1] FITTING-PRESSURE RELIEF  
4. 226-2684 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
5. 9C-8421 [2] SHAFT-AXLE  
6. 9C-9194 [1] HOUSING-PINION  
7. 9G-5315 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  2M-0344 [2] RING-SEALING  
10. 123-4003 [1] SEAL-LIP TYPE  
11. 192-9121 [1] HOUSING AS  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
12. 372-0715 [2] HOUSING-AXLE  
13. 2P-1373 [2] CUP-BEARING  
14. 3B-0551 [1] PLUG-PIPE  
15. 4H-6520 [1] SEAL-O-RING  
16. 5P-3119 [2] RING-RETAINING  
17. 5P-4484 [1] PLUG-MAGNETIC  
18. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
19. 6V-5686 M [10] BOLT (M16X2X50-MM)  
20. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
21. 6Y-2538 [2] CONE-BEARING  
22. 7M-8485 [4] SEAL-O-RING  
23. 8B-6342 [2] CONE-BEARING  
24. 8B-6343 [2] CUP-BEARING  
25. 8T-0649 M [24] BOLT (M16X2X110-MM)  
26. 8T-5002 M [24] BOLT (M16X2X180-MM)  
27. 9C-6041 [3] DOWEL  
28. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (AXLE)  
29. 9C-8419 [2] NUT-BEARING  
30. 9S-4181 [2] PLUG (1-5/16-12-THD)  
31. 9S-9334 [1] PLUG  
32. 9X-2027 [6] WASHER (11X18X2-MM THK)  
33. 1U-8846 B SEALANT-GASKET (62-ML)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP33520384
 

112-0724: HOUSING GP-OSCILLATING AXLE

112-0724 HOUSING GP-OSCILLATING AXLE
S/N AYB1-402
PART OF 112-0723, 126-7845, 126-7846 AXLE AR-OSCILLATING
i01067034 SEBP3352
1120724 HOUSING GP-OSCILLATING AXLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-6041 [3] DOWEL  
2. 5H-3701 [2] SCREW-PURGE  
3. 8T-0336 [1] FITTING-PRESSURE RELIEF  
4. 9S-4181 [2] PLUG (1-5/16-12-THD)  
5. 7M-8485 [3] SEAL-O-RING  
6. 5P-4484 [1] PLUG-MAGNETIC  
7. 112-0764 [1] SUPPORT-TRUNNION  
8. 5P-8247 [78] WASHER-HARD (17X32X3.5-MM THK)  
9. 6V-5686 M [30] BOLT (M16X2X50-MM)  
10. 112-0765 [1] SUPPORT-TRUNNION  
11. 4V-5099 [1] COVER  
12. 9C-8421 [2] SHAFT-AXLE  
13. 9G-5315 [2] SEAL GP-DUO-CONE  
14. 6Y-2538 [2] CONE-BEARING  
15. 2P-1373 [2] CUP-BEARING  
16. 8B-6342 [2] CONE-BEARING  
17. 8B-6343 [2] CUP-BEARING  
18. 127-5091 [2] HOUSING-AXLE  
19. 1U-8846 B SEALANT-GASKET  
20. 4H-6520 [1] SEAL-O-RING  
21. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
22. 9X-2027 [6] WASHER (11X18X2-MM THK)  
23. 4E-8534 [1] RETAINER-SEAL  
24. 9C-9194 [1] HOUSING-PINION  
25. 9C-6021 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
26. 5P-3119 [2] RING-RETAINING  
27. 9C-8419 [2] NUT-BEARING  
28. 3B-0551 [1] PLUG-PIPE  
29. 6C-5304 M [24] BOLT (M16X2X110-MM)  
30. 9C-9191 [1] TRUNNION  
31. 2K-0715 [2] WASHER-THRUST (5.03X6.71X0.250-IN THK)  
32. 109-4731 [1] PLATE  
33. 6V-3531 M [4] BOLT (M20X2.5X50-MM)  
34. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
35. 2K-0713 [1] BUSHING  
36. 143-4902 [1] HOUSING AS-OSCILLATING  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
37. 9X-6493 M [24] BOLT (M16X2X180-MM)  
38. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
39. 123-4003 [1] SEAL-LIP TYPE  
40. 3K-0159 [1] RING-RETAINING  
41. 3K-0109 [1] BUSHING  
42. 3K-0158 [2] SEAL-LIP TYPE  
43. 6K-2430 [1] SEAL-LIP TYPE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP33520385
 

112-0724: HOUSING GP-OSCILLATING AXLE

112-0724 HOUSING GP-OSCILLATING AXLE
S/N AYB1-UP
PART OF 112-0723, 126-7845, 126-7846 AXLE AR-OSCILLATING
i01740183 SEBP3352
1120724 HOUSING GP-OSCILLATING AXLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-6041 [3] DOWEL  
2. 5H-3701 [2] SCREW-PURGE  
3. 8T-0336 [1] FITTING-PRESSURE RELIEF  
4. 9S-4181 [2] PLUG (1-5/16-12-THD)  
5. 7M-8485 C [4] SEAL-O-RING  
6. 5P-4484 [1] PLUG-MAGNETIC  
7. 112-0764 [1] SUPPORT-TRUNNION  
8. 5P-8247 [78] WASHER-HARD (17X32X3.5-MM THK)  
9. 6V-5686 M [30] BOLT (M16X2X50-MM)  
10. 112-0765 [1] SUPPORT-TRUNNION  
11. 4V-5099 [1] COVER  
12. 9C-8421 [2] SHAFT-AXLE  
13. 9G-5315 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  2M-0344 [2] RING-SEALING  
14. 6Y-2538 [2] CONE-BEARING  
15. 2P-1373 [2] CUP-BEARING  
16. 8B-6342 [2] CONE-BEARING  
17. 8B-6343 [2] CUP-BEARING  
18. 372-0716 [2] HOUSING-AXLE  
19. 1U-8846 B SEALANT-GASKET  
20. 4H-6520 [1] SEAL-O-RING  
21. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
22. 9X-2027 [6] WASHER (11X18X2-MM THK)  
23. 4E-8534 [1] RETAINER-SEAL  
24. 9C-9194 [1] HOUSING-PINION  
25. 226-2684 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
26. 5P-3119 [2] RING-RETAINING  
27. 9C-8419 [2] NUT-BEARING  
28. 3B-0551 [1] PLUG-PIPE  
29. 8T-0649 M [24] BOLT (M16X2X110-MM)  
30. 9C-9191 [1] TRUNNION  
31. 2K-0715 [2] WASHER-THRUST (5.03X6.71X0.250-IN THK)  
32. 109-4731 [1] PLATE  
33. 6V-3531 M [4] BOLT (M20X2.5X50-MM)  
34. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
35. 213-1370 C [1] BUSHING  
36. 192-9128 C [1] HOUSING AS-OSCILLATING  
37. 8T-5002 M [24] BOLT (M16X2X180-MM)  
38. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (AXLE)  
39. 123-4003 [1] SEAL-LIP TYPE  
40. 3K-0159 [1] RING-RETAINING  
41. 213-1365 C [1] BUSHING  
42. 3K-0158 [2] SEAL-LIP TYPE  
43. 6K-2430 [1] SEAL-LIP TYPE  
44. 9S-9334 C [1] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP33520386
 

261-5714: KIT-FINAL DRIVE BEARING

261-5714 KIT-FINAL DRIVE BEARING -FINAL DRIVE
S/N AYB1-UP
KIT CONTAINS ANTI-FRICTION BEARINGS, SLEEVE BEARING/BUSHINGS, THRUST WASHERS/THRUST DISCS. ROLL PINS/SPRING PINS, NUT-STAKE, BEARING CAGE LOCKS, BENDABLE LOCKS, BRAKE WEAR INDICATOR DOWEL, BRAKE PISTON SEALS. PLUG, BEARING LOCATOR DOWELS AND DOWEL HOLE CAPS.. BEARING CAGE RETAINING PIN, DUO-CONE SEAL GROUP, SEALS, GASKETS, LIP SEALS, AND THRUST WASHER. RETAINING SCREWS.
FOR USE WITH @@@@@112-0723@@@@@, @@@@@112-0768@@@@@, @@@@@138-3122@@@@@
i06008070 SEBP3352
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9C-7727 [6] BUSHING  
  1J-4757 [1] CONE-BEARING  
  2D-9455 [1] CONE-BEARING  
  6Y-2538 [2] CONE-BEARING  
  6Y-2539 [1] CONE-BEARING  
  8B-6342 [2] CONE-BEARING  
  030-0061 [1] CONE-BEARING  
  1J-2860 [1] CUP-BEARING  
  2D-9454 [1] CUP-BEARING  
  2P-1373 [2] CUP-BEARING  
  6Y-2540 [1] CUP-BEARING  
  8B-6343 [2] CUP-BEARING  
  030-0060 [1] CUP-BEARING  
  117-1801 [2] DOWEL  
  4E-3897 [2] LOCK  
  9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
  4E-4031 [2] PIN  
  8T-2925 [6] PIN-SPRING  
  9X-2619 [4] PIN-SPRING  
  9X-2620 [4] PIN-SPRING  
  138-1645 [6] PIN-SPRING  
  112-0759 [2] PLUG  
  325-3781 [2] RING-BACKUP  
  8R-9207 [2] SEAL  
  325-3780 [2] SEAL  
  9G-5315 [2] SEAL GP-DUO-CONE  
  123-4003 [1] SEAL-LIP TYPE  
  2H-3088 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  4H-6520 [1] SEAL-O-RING  
  7M-8485 [3] SEAL-O-RING  
  150-4651 [2] SEAL-O-RING  
  293-3609 [6] SPRING  
  9C-9537 [12] WASHER-THRUST  
  M   METRIC PART
 

#SEBP33520387
 

191-9329: KIT-TRANSMISSION BEARING

191-9329 KIT-TRANSMISSION BEARING -TRANSMISSION
S/N AYB1-UP
CONTAINS ANTI-FRICTION BEARINGS, SLEEVE BEARINGS/BUSHINGS, METAL SEAL RINGS. THRUST WASHERS/THRUST DISCS, ROLL PINS/SPRING PINS, BEARING LOCATOR DOWELS AND DOWEL HOLE CAPS.
i06007856 SEBP3352
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7B-7515 [1] BALL BEARING  
  379-2185 [2] BALL BEARING  
  129-2380 [1] BALL BEARING  
  1S-3743 [1] BALL BEARING  
  1T-0043 [1] BALL BEARING  
  8E-5247 [1] BALL BEARING  
  5P-3131 [3] BEARING AS-ROLLER  
  5P-3930 [8] BEARING AS-ROLLER  
  7S-4534 [8] BEARING-CAGED  
  143-4642 [1] BEARING-SPECIAL  
  3T-2094 [4] BUSHING  
  9G-7683 [2] BUSHING  
  2P-8987 [2] CONE-BEARING  
  155-6648 [2] CONE-BEARING  
  2P-8986 [2] CUP-BEARING  
  155-6647 [2] CUP-BEARING  
  8E-8297 [6] DISC-THRUST  
  8E-8299 [32] DISC-THRUST  
  9W-0519 [1] DISC-THRUST  
  4S-8537 [1] DOWEL  
  4S-8541 [2] DOWEL  
  8S-3426 [1] DOWEL  
  3S-8109 [16] PIN-SPRING  
  4H-4737 [4] PIN-SPRING  
  3K-1432 [2] RING-METAL SEAL  
  8P-8950 [2] RING-METAL SEAL  
  9M-1503 [1] RING-METAL SEAL  
  6Y-8030 [1] RING-SEAL  
  8P-9723 [1] RING-SEAL  
  1T-1621 [1] RING-SEAL  
  1T-1622 [1] RING-SEAL  
  3P-7019 [2] SEAL-METAL  
 

#SEBP33520388
 

190-7409: LINES GP-AXLE OIL COOLER

190-7409 LINES GP-AXLE OIL COOLER
S/N AYB1-553
PART OF 191-3314 COOLER & MTG AR-AXLE OIL
i01481315 SEBP3352
1907409 LINES GP-AXLE OIL COOLER Parts scheme 1907409 LINES GP-AXLE OIL COOLER Parts scheme 1907409 LINES GP-AXLE OIL COOLER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-5458 [1] SPACER (0.406X0.75X0.5-IN THK)  
2. 7K-1181 [7] STRAP-CABLE  
3. 7X-7958 [1] CLAMP-HOSE  
4. 8J-0426 [4] PLUG  
5. 8T-7970 [1] ELBOW  
6. 9R-4764 [1] ROD  
8. 114-9224 [1] SPACER (11.13X19.05X47-MM THK)  
9. 116-4491 [1] BRACKET AS  
10. 118-6878 [1] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
11. 119-4167 [1] ROD  
12. 130-9505 [2] FILTER-MAGNETIC (AXLE OIL COOLER)  
13. 151-4506 [1] TUBE AS  
14. 151-4507 [1] TUBE AS  
15. 151-4508 I [1] HOSE AS  
16. 153-3495 [1] BRACKET AS  
17. 153-5100 [2] MANIFOLD AS  
18. 155-5510 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
19. 162-8352 [2] U-BOLT  
20. 191-5739 I [1] HOSE AS  
21. 191-5740 I [1] HOSE AS  
22. 191-5742 [1] TUBE AS  
23. 191-5743 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
24. 191-5744 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
25. 191-8038 I [1] HOSE AS  
26. 191-8039 I [1] HOSE AS  
27. 192-4263 [1] TUBE AS  
28. 192-4264 [1] TUBE AS  
29. 192-4265 I [1] HOSE AS  
30. 192-8994 I [1] HOSE AS  
31. 192-8995 I [1] HOSE AS  
32. 192-8996 I [1] HOSE AS  
33. 192-8997 I [1] HOSE AS  
34. 192-8998 [1] BRACKET AS  
35. 197-8009 [1] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
36. 200-5209 I [1] HOSE AS  
37. 212-7755 [1] BRACKET AS  
38. 110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
39. 2M-9780 [2] SEAL-O-RING  
40. 3D-2824 [2] SEAL-O-RING  
41. 3J-1907 [4] SEAL-O-RING  
42. 3K-0360 [3] SEAL-O-RING  
43. 3P-2404 [1] CLIP  
44. 5K-9090 [10] SEAL-O-RING  
45. 5P-7468 [3] CLIP (SLOT)  
46. 5P-7469 [3] CLIP (TAB)  
47. 5P-8444 [3] GROMMET (37-MM ID)  
48. 6D-4244 [1] CLIP (LOOP)  
49. 6V-1889 [12] CLIP (LOOP)  
50. 6V-8397 [4] SEAL-O-RING  
51. 6V-8398 [6] SEAL-O-RING  
52. 6V-8635 [1] CONNECTOR  
53. 6V-8640 [1] CONNECTOR  
54. 6V-8714 [1] CONNECTOR  
55. 6V-8724 [4] ELBOW  
56. 6V-8733 [2] UNION  
57. 6V-8734 [1] UNION  
58. 6V-8789 [2] TEE  
59. 6V-9746 [12] SEAL-O-RING  
60. 7C-4354 [1] CLIP  
61. 7D-4092 [4] CLIP  
62. 7D-7233 [2] CLIP (LOOP)  
63. 7M-8485 [10] SEAL-O-RING  
64. 7X-0752 M [2] BOSS-WELD (M10X1.5X65-MM)  
65. 8C-5723 [1] CONNECTOR  
66. 8C-6875 [4] CONNECTOR  
67. 8C-8762 [2] ELBOW  
68. 8T-4121 [36] WASHER-HARD (11X21X2.5-MM THK)  
69. 8T-4133 M [10] NUT (M10X1.5-THD)  
70. 8T-4136 M [11] BOLT (M10X1.5X25-MM)  
71. 8T-4137 M [11] BOLT (M10X1.5X20-MM)  
72. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
73. 8T-5389 [1] ELBOW  
74. 9C-6809 M [4] BLOCK (M10X1.5-MM)  
75. 9S-4181 [2] PLUG (1-5/16-12-THD)  
76. 9S-4185 [3] PLUG (3/4-16-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33520389
 

190-7409: LINES GP-AXLE OIL COOLER

190-7409 LINES GP-AXLE OIL COOLER
S/N AYB554-UP
PART OF 191-3314 COOLER & MTG AR-AXLE OIL
i01912596 SEBP3352
1907409 LINES GP-AXLE OIL COOLER Parts scheme 1907409 LINES GP-AXLE OIL COOLER Parts scheme 1907409 LINES GP-AXLE OIL COOLER Parts scheme 1907409 LINES GP-AXLE OIL COOLER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-5458 [1] SPACER (0.406X0.75X0.5-IN THK)  
2. 7K-1181 [9] STRAP-CABLE  
3. 7X-7958 [1] CLAMP-HOSE  
4. 8J-0426 [4] PLUG  
5. 8T-7970 [1] ELBOW  
6. 9R-4764 [1] ROD  
7. 091-1735 [1] BLOCK  
8. 114-9224 [1] SPACER (11.13X19.05X47-MM THK)  
9. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 119-4167 [1] ROD  
11. 251-6351 [2] FILTER-MAGNETIC (AXLE OIL COOLER)  
12. 151-4506 [1] TUBE AS  
13. 151-4507 [1] TUBE AS  
14. 151-4508 I [1] HOSE AS  
15. 153-3495 [1] BRACKET AS  
16. 153-5100 [2] MANIFOLD AS  
17. 155-5510 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
18. 162-8352 [2] U-BOLT  
19. 191-5739 I [1] HOSE AS  
20. 191-5742 [1] TUBE AS  
21. 191-5743 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
22. 191-5744 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
23. 191-8039 I [1] HOSE AS  
24. 192-4263 [1] TUBE AS  
25. 192-4264 [1] TUBE AS  
26. 192-4265 I [1] HOSE AS  
27. 192-8998 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
28. 200-5209 I [1] HOSE AS  
29. 223-9995 I [1] HOSE AS  
30. 223-9996 I [1] HOSE AS  
31. 223-9998 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
33. 224-0001 [1] BRACKET  
34. 224-3329 I [1] HOSE AS  
35. 224-3331 I [1] HOSE AS  
36. 110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
37. 2M-9780 [2] SEAL-O-RING  
38. 3D-2824 [2] SEAL-O-RING  
39. 3J-1907 [4] SEAL-O-RING  
40. 3K-0360 [3] SEAL-O-RING  
41. 3P-2404 [1] CLIP  
42. 5D-0718 [3] CLIP (LOOP)  
43. 5K-9090 [10] SEAL-O-RING  
44. 5P-7468 [3] CLIP (SLOT)  
45. 5P-7469 [3] CLIP (TAB)  
46. 5P-8444 [3] GROMMET (37-MM ID)  
47. 6D-4244 [1] CLIP (LOOP)  
48. 6V-1889 [6] CLIP (LOOP)  
49. 6V-8397 [4] SEAL-O-RING  
50. 6V-8398 [6] SEAL-O-RING  
51. 6V-8635 [1] CONNECTOR  
52. 6V-8714 [1] CONNECTOR  
53. 6V-8724 [4] ELBOW  
54. 6V-8789 [2] TEE  
55. 6V-8998 [1] UNION  
56. 6V-9172 [1] NUT (1-7/16-12-THD)  
57. 6V-9746 [8] SEAL-O-RING  
58. 7C-4354 [1] CLIP  
59. 7D-4092 [2] CLIP  
60. 7D-7233 [3] CLIP (LOOP)  
61. 7M-8485 [10] SEAL-O-RING  
62. 7X-0752 M [1] BOSS-WELD (M10X1.5X65-MM)  
63. 8C-5723 [1] CONNECTOR  
64. 6V-9875 [4] CONNECTOR  
65. 8C-8762 [2] ELBOW  
66. 8T-4121 [30] WASHER-HARD (11X21X2.5-MM THK)  
67. 8T-4133 M [9] NUT (M10X1.5-THD)  
68. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
69. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
70. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
71. 8T-4935 M [1] BOSS-WELD (M10X1.5X45-MM)  
72. 8T-5389 [2] ELBOW  
73. 9C-6809 M [4] BLOCK (M10X1.5-MM)  
74. 9S-4181 [2] PLUG (1-5/16-12-THD)  
75. 9S-4185 [3] PLUG (3/4-16-THD)  
76. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
77. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
78. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
79. 2S-4078 [4] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 950G II :

GEAR GP-OUTPUT TRANSFER
114-8947 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
114-8947 GEAR GP-OUTPUT TRANSFER
GEAR GP-BEVEL & PINION
157-0340 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0738 GEAR GP-BEVEL & PINION
FILTER GP-OIL
249-1750 FILTER GP-OIL
FILTER GP-OIL
197-1993 FILTER GP-OIL
HOUSING GP-FIXED AXLE
112-0769 HOUSING GP-FIXED AXLE
HOUSING GP-FIXED AXLE
112-0769 HOUSING GP-FIXED AXLE
HOUSING GP-FIXED AXLE
214-6156 HOUSING GP-FIXED AXLE
HOUSING GP-OSCILLATING AXLE
112-0724 HOUSING GP-OSCILLATING AXLE
HOUSING GP-OSCILLATING AXLE
112-0724 HOUSING GP-OSCILLATING AXLE
261-5714 KIT-FINAL DRIVE BEARING
191-9329 KIT-TRANSMISSION BEARING
LINES GP-AXLE OIL COOLER
190-7409 LINES GP-AXLE OIL COOLER

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.