OPERATOR STATION
SEAT GPCAB GP
CANOPY GP
AIR CONDITIONER GP
CONTROL GP-ELECTROHYDRAULIC
OPERATOR STATION
SEAT GP
#SEBP33520760
188-9820: ARMREST GP
188-9820 ARMREST GP -LH
S/N AYB1-UP
PART OF 178-7913, 207-2804 SEAT GP, 267-9431 SEAT GP-SUSPENSION
S/N AYB1-UP
PART OF 178-7913, 207-2804 SEAT GP, 267-9431 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-2219 | [1] | CUSHION AS | |
| 3. | 163-1149 | [1] | BRACKET AS | |
| 4. | 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | |
| 5. | 2M-0849 | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 6. | 3E-4312 | [1] | NUT-SQUARE (3/8-16-THD) | |
| 8. | 6V-2687 | [4] | SCREW-PAN HEAD (10-24X1-IN) | |
| 9. | 8S-7803 | [1] | RING-RETAINING | |
| 10. | 8T-8641 | [1] | WASHER (9.8X16X0.8-MM THK) | |
| 11. | 8Y-5910 | [1] | KNOB AS | |
| 12. | 8Y-5913 | [1] | BASE-ARMREST | |
| 13. | 8Y-5914 | [1] | SPRING | |
| 14. | 9X-8873 | [1] | BOLT (1/2-13X2.25-IN) | |
| 15. | 132-0338 | [1] | WASHER-PLASTIC (13X31.7X0.8-MM THK) |
#SEBP33520761
185-7632: CAB AR
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 208-3915 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (2-FUNCTION) | ||
| 199-2831 Y | [1] | CONTROL GP-FOOT BRAKE | ||
| 191-1856 Y | [1] | CONTROL GP-PARKING BRAKE | ||
| 219-7619 Y | [1] | CONTROL GP-STEERING (COMMAND CONTROL STEERING) | ||
| 171-8888 Y | [1] | DUCT & FILTER GP-CAB AIR | ||
| 263-5734 Y | [1] | FLOOR GP-SOUND SUPPRESSION | ||
| 191-1855 Y | [1] | HEATER GP-CAB | ||
| 171-8883 Y | [1] | INSTALLATION GP-RADIO | ||
| 232-7783 Y | [1] | LIGHTING GP-FLOOD (CAB FRONT) | ||
| 171-8882 Y | [1] | LINER GP-CAB | ||
| 192-7049 Y | [1] | MODULE GP-SPEEDOMETER & TACH | ||
| 206-5145 Y | [1] | PANEL GP-INSTRUMENT (LOWER) | ||
| 171-8881 Y | [1] | PANEL GP-INSTRUMENT (UPPER) | ||
| 207-1759 Y | [1] | PEDAL GP-GOVERNOR | ||
| 173-2136 Y | [1] | ROPS GP-ENCLOSED | ||
| 174-3624 Y | [1] | SEAT GP-SUSPENSION | ||
| 198-8771 Y | [1] | SUPPORT GP-HYDRAULIC CONTROL | ||
| 203-2738 Y | [1] | WIPER GP-WINDOW | ||
| 195-6255 Y | [1] | WIRING GP-CAB | ||
| 117-1410 | [1] | SEALING GP-GLASS | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520762
204-4489: CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 121-3908 | [1] | ADHESIVE | ||
| 208-3915 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (2-FUNCTION) | ||
| 199-2831 Y | [1] | CONTROL GP-FOOT BRAKE | ||
| 191-1856 Y | [1] | CONTROL GP-PARKING BRAKE | ||
| 219-7619 Y | [1] | CONTROL GP-STEERING (COMMAND CONTROL STEERING) | ||
| 204-3664 Y | [1] | DUCT GP-CAB AIR | ||
| 204-4125 Y | [1] | GUARD GP-VANDALISM (INSTRUMENT PANEL) | ||
| 176-7248 Y | [1] | LIGHTING GP-FLOOD (CAB FRONT) | ||
| 204-3719 Y | [1] | LINER GP-CAB | ||
| 192-7049 Y | [1] | MODULE GP-SPEEDOMETER & TACH | ||
| 206-5145 Y | [1] | PANEL GP-INSTRUMENT (LOWER) | ||
| 206-6500 Y | [1] | PANEL GP-INSTRUMENT (UPPER, OPEN ROPS) | ||
| 207-1759 Y | [1] | PEDAL GP-GOVERNOR | ||
| 204-4493 Y | [1] | ROPS GP-OPEN | ||
| 204-4492 Y | [1] | SEAT GP-SUSPENSION | ||
| 152-2114 | [1] | SHEET | ||
| 198-8771 Y | [1] | SUPPORT GP-HYDRAULIC CONTROL | ||
| 207-8617 Y | [1] | WIRING GP-CAB | ||
| 121-3908 | [1] | ADHESIVE | ||
| 208-3915 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (2-FUNCTION) | ||
| 199-2831 Y | [1] | CONTROL GP-FOOT BRAKE | ||
| 191-1856 Y | [1] | CONTROL GP-PARKING BRAKE | ||
| 219-7619 Y | [1] | CONTROL GP-STEERING (COMMAND CONTROL STEERING) | ||
| 204-3664 Y | [1] | DUCT GP-CAB AIR | ||
| 204-4125 Y | [1] | GUARD GP-VANDALISM (INSTRUMENT PANEL) | ||
| 176-7248 Y | [1] | LIGHTING GP-FLOOD (CAB FRONT) | ||
| S/N AYB1-704 | ||||
| 232-7783 Y | [1] | LIGHTING GP-FLOOD (CAB FRONT) | ||
| S/N AYB705-UP | ||||
| 204-3719 Y | [1] | LINER GP-CAB | ||
| 192-7049 Y | [1] | MODULE GP-SPEEDOMETER & TACH | ||
| 206-5145 Y | [1] | PANEL GP-INSTRUMENT (LOWER) | ||
| 206-6500 Y | [1] | PANEL GP-INSTRUMENT (UPPER, OPEN ROPS) | ||
| 207-1759 Y | [1] | PEDAL GP-GOVERNOR | ||
| 204-4493 Y | [1] | ROPS GP-OPEN | ||
| 204-4492 Y | [1] | SEAT GP-SUSPENSION | ||
| 152-2114 | [1] | SHEET | ||
| 198-8771 Y | [1] | SUPPORT GP-HYDRAULIC CONTROL | ||
| 207-8617 Y | [1] | WIRING GP-CAB | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520763
163-0872: COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
S/N AYB1-UP
PART OF 187-8441, 216-9818 COMPRESSOR GP-REFRIGERANT
S/N AYB1-UP
PART OF 187-8441, 216-9818 COMPRESSOR GP-REFRIGERANT
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 314-4018 | [1] | VALVE AS-PRESSURE RELIEF (REFRIGERANT COMPRESSOR) | |
| 3. | 7T-4532 | [1] | PLUG AS | |
| 4. | 9X-7385 | [2] | SEAL-O-RING | |
| 5. | 4C-2959 B | OIL-AIR CONDITIONER | ||
| 6. | 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| B | USE AS REQUIRED | |||
#SEBP33520764
187-8441: COMPRESSOR GP-REFRIGERANT
187-8441 COMPRESSOR GP-REFRIGERANT
S/N AYB1-402
PART OF 185-1639 AIR CONDITIONER AR
S/N AYB1-402
PART OF 185-1639 AIR CONDITIONER AR
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-0872 Y | [1] | COMPRESSOR GP-REFRIGERANT | |
| 2. | 191-5215 | [1] | BELT-SERPENTINE (A/C COMPRESSOR) | |
| 3. | 192-1563 Y | [2] | IDLER GP-BELT (ALTERNATOR, REFRIGERANT COMPR) | |
| 4. | 7X-2538 M | [4] | BOLT (M8X1.25X100-MM) | |
| 5. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520765
216-9818: COMPRESSOR GP-REFRIGERANT
216-9818 COMPRESSOR GP-REFRIGERANT
S/N AYB403-UP
PART OF 217-0926 AIR CONDITIONER AR
S/N AYB403-UP
PART OF 217-0926 AIR CONDITIONER AR
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-0872 Y | [1] | COMPRESSOR GP-REFRIGERANT | |
| 2. | 192-1563 Y | [2] | IDLER GP-BELT (ALTERNATOR, REFRIGERANT COMPR) | |
| 3. | 219-3304 | [1] | BELT-SERPENTINE (A/C COMPRESSOR) | |
| 4. | 7X-2538 M | [4] | BOLT (M8X1.25X100-MM) | |
| 5. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520766
209-5806: CONDENSER & MTG GP-REFRIGERANT
209-5806 CONDENSER & MTG GP-REFRIGERANT
S/N AYB1-UP
PART OF 185-1639, 217-0926 AIR CONDITIONER AR
S/N AYB1-UP
PART OF 185-1639, 217-0926 AIR CONDITIONER AR
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 2. | 125-2873 | [1] | CORE AS-CONDENSER | |
| 3. | 176-0326 | [1] | HINGE AS | |
| 4. | 209-5789 | [1] | BRACKET | |
| 5. | 209-5790 | [1] | BRACKET AS | |
| 6. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 7. | 7X-7729 | [9] | WASHER (11X25X3-MM THK) | |
| 8. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#SEBP33520767
208-3915: CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N AYB1-426
PART OF 185-7632 CAB AR, 204-4489 CANOPY AR-OPEN ROPS
S/N AYB1-426
PART OF 185-7632 CAB AR, 204-4489 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 2. | 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | |
| 3. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 4. | 8R-3695 | [1] | GROMMET | |
| 5. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 6. | 9X-2026 | [9] | WASHER (6.5X17X1-MM THK) | |
| 7. | 3S-2093 | [2] | STRAP-CABLE | |
| 8. | 105-3372 | [1] | SPRING | |
| 9. | 106-1582 | [1] | HOUSING | |
| 10. | 106-1583 | [2] | ROD | |
| 11. | 106-1584 | [2] | SPACER (6.22X9.52X85-MM THK) | |
| 12. | 114-4247 | [4] | BRACKET AS | |
| 13. | 139-1378 | [4] | BEARING | |
| 14. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 15. | 149-3949 | [2] | LEVER-CONTROL | |
| 16. | 161-8979 Y | [2] | SENSOR GP-POSITION (CONTROL LEVER) | |
| 17. | 163-8119 | [2] | SPRING | |
| 18. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 19. | 173-2125 | [1] | COVER | |
| 20. | 173-2127 | [1] | COVER | |
| 21. | 6V-9335 BD | SEAL | ||
| 22. | 188-0955 | [3] | COIL AS-DETENT (CONTROL LEVER) | |
| (EACH INCLUDES) | ||||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 23. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 24. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 25. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 26. | 207-7447 | [2] | PLATE | |
| 27. | 208-3916 | [1] | BRACKET | |
| 28. | 208-3917 | [1] | BRACKET | |
| 29. | 208-3918 | [1] | PLATE | |
| 30. | 208-8333 | [2] | COVER | |
| 31. | 209-9250 | [1] | BRACKET AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 32. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| 33. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 34. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 35. | 5P-8523 | [1] | GROMMET | |
| 36. | 5P-8524 | [1] | GROMMET | |
| 37. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 38. | 6V-7743 M | [4] | LOCKNUT (M6X1-THD) | |
| 39. | 8M-2771 | [2] | CLIP | |
| 40. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 41. | 8T-4970 M | [10] | BOLT (M6X1X14-MM) | |
| 42. | 9X-2044 M | [7] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 43. | 090-4808 BD | SEAL | ||
| 44. | 5P-6120 BD | TRIM-EDGE | ||
| 45. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520768
208-3915: CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N AYB427-UP
PART OF 185-7632 CAB AR, 204-4489 CANOPY AR-OPEN ROPS
S/N AYB427-UP
PART OF 185-7632 CAB AR, 204-4489 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 2. | 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | |
| 3. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 4. | 8R-3695 | [1] | GROMMET | |
| 5. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 6. | 9X-2026 | [9] | WASHER (6.5X17X1-MM THK) | |
| 7. | 3S-2093 | [2] | STRAP-CABLE | |
| 8. | 105-3372 | [1] | SPRING | |
| 9. | 106-1582 | [1] | HOUSING | |
| 10. | 106-1583 | [2] | ROD | |
| 11. | 106-1584 | [2] | SPACER (6.22X9.52X85-MM THK) | |
| 12. | 114-4247 | [4] | BRACKET AS | |
| 13. | 139-1378 | [4] | BEARING | |
| 14. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 15. | 149-3949 | [2] | LEVER-CONTROL | |
| 16. | 214-4862 CY | [2] | SENSOR GP-POSITION (CONTROL LEVER) | |
| 17. | 163-8119 | [2] | SPRING | |
| 18. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 19. | 173-2125 | [1] | COVER | |
| 20. | 173-2127 | [1] | COVER | |
| 21. | 6V-9335 BD | SEAL | ||
| 22. | 188-0955 | [3] | COIL AS-DETENT (CONTROL LEVER) | |
| (EACH INCLUDES) | ||||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 23. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 24. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 25. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 26. | 207-7447 | [2] | PLATE | |
| 27. | 208-3916 | [1] | BRACKET | |
| 28. | 208-3917 | [1] | BRACKET | |
| 29. | 208-3918 | [1] | PLATE | |
| 30. | 208-8333 | [2] | COVER | |
| 31. | 209-9250 | [1] | BRACKET AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 32. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| 33. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 34. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 35. | 5P-8523 | [1] | GROMMET | |
| 36. | 5P-8524 | [1] | GROMMET | |
| 37. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 38. | 6V-7743 M | [4] | LOCKNUT (M6X1-THD) | |
| 39. | 8M-2771 | [2] | CLIP | |
| 40. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 41. | 8T-4970 M | [10] | BOLT (M6X1X14-MM) | |
| 42. | 9X-2044 M | [7] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 43. | 090-4808 BD | SEAL | ||
| 44. | 5P-6120 BD | TRIM-EDGE | ||
| 45. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520769
210-9583: CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYB1-UP
PART OF 192-4677, 202-8012 HYDRAULIC AR-3 VALVE
Type 1
S/N AYB1-UP
PART OF 192-4677, 202-8012 HYDRAULIC AR-3 VALVE
Type 1
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | |
| 2. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 3. | 6T-5600 | [2] | BOSS | |
| 4. | 8R-3695 | [1] | GROMMET | |
| 5. | 8T-0328 | [6] | WASHER-HARD (5.5X10X1-MM THK) | |
| 6. | 9T-4735 | [1] | SPRING | |
| 7. | 9X-2026 | [8] | WASHER (6.5X17X1-MM THK) | |
| 8. | 105-2976 | [4] | FLANGE | |
| 9. | 105-3372 | [1] | SPRING | |
| 10. | 106-1582 | [1] | HOUSING | |
| 11. | 106-1584 | [2] | SPACER (6.22X9.52X85-MM THK) | |
| 12. | 114-4247 | [4] | BRACKET AS | |
| 13. | 114-8165 | [2] | ROD | |
| 14. | 139-1378 | [6] | BEARING | |
| 15. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 16. | 149-3949 | [3] | LEVER-CONTROL | |
| 17. | 150-6287 | [2] | SPACER (6.22X9.52X31-MM THK) | |
| 18. | 161-8979 Y | [3] | SENSOR GP-POSITION (CONTROL LEVER) | |
| 19. | 163-8119 | [3] | SPRING | |
| 20. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 21. | 179-1238 | [1] | COVER | |
| 22. | 184-2616 | [1] | COVER | |
| 23. | 188-0955 | [3] | COIL AS-DETENT (CONTROL LEVER) | |
| (EACH INCLUDES) | ||||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 24. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 25. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 26. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 27. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 28. | 207-7447 | [2] | PLATE | |
| 29. | 208-2479 | [2] | SPACER (10X13.1X5.5-MM THK) | |
| 30. | 208-8333 | [3] | COVER | |
| 31. | 211-7708 | [1] | PLATE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 32. | 211-7710 | [1] | COVER AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 33. | 211-8285 | [1] | PLATE | |
| 34. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| 35. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 36. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 37. | 5P-8523 | [3] | GROMMET | |
| 38. | 5P-8524 | [1] | GROMMET | |
| 39. | 6V-7743 M | [4] | LOCKNUT (M6X1-THD) | |
| 40. | 7X-2533 M | [3] | BOLT (M6X1X35-MM) | |
| 41. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
| 42. | 8C-8451 M | [1] | BOLT (M6X1X40-MM) | |
| 43. | 8M-2771 | [2] | CLIP | |
| 44. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 45. | 8T-4970 M | [10] | BOLT (M6X1X14-MM) | |
| 46. | 9X-2044 M | [6] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 47. | 090-4808 BD | SEAL | ||
| 48. | 6V-9335 BD | SEAL | ||
| 49. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
