OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICCONTROL GP-HANDLE
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#SEBP33520770
210-9583: CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYB1-458
PART OF 192-4677, 202-8012 HYDRAULIC AR-3 VALVE
S/N AYB1-458
PART OF 192-4677, 202-8012 HYDRAULIC AR-3 VALVE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | |
| 2. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 3. | 6T-5600 | [2] | BOSS | |
| 4. | 8R-3695 | [1] | GROMMET | |
| 5. | 8T-0328 | [6] | WASHER-HARD (5.5X10X1-MM THK) | |
| 6. | 9T-4735 | [1] | SPRING | |
| 7. | 9X-2026 | [8] | WASHER (6.5X17X1-MM THK) | |
| 8. | 105-2976 | [3] | FLANGE | |
| 9. | 105-3372 | [1] | SPRING | |
| 10. | 106-1582 | [1] | HOUSING | |
| 11. | 106-1584 | [2] | SPACER (6.22X9.52X85-MM THK) | |
| 12. | 114-4247 | [4] | BRACKET AS | |
| 13. | 114-8165 | [2] | ROD | |
| 14. | 139-1378 | [6] | BEARING | |
| 15. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 16. | 149-3949 | [3] | LEVER-CONTROL | |
| 17. | 150-6287 | [2] | SPACER (6.22X9.52X31-MM THK) | |
| 18. | 161-8979 Y | [3] | SENSOR GP-POSITION (CONTROL LEVER) | |
| 19. | 163-8119 | [3] | SPRING | |
| 20. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 21. | 179-1238 | [1] | COVER | |
| 22. | 184-2616 | [1] | COVER | |
| 23. | 188-0955 | [3] | COIL AS-DETENT (CONTROL LEVER) | |
| (EACH INCLUDES) | ||||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 24. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 25. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 26. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 27. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 28. | 207-7447 | [2] | PLATE | |
| 29. | 208-2479 | [2] | SPACER (10X13.1X5.5-MM THK) | |
| 30. | 208-8333 | [3] | COVER | |
| 31. | 211-7708 | [1] | PLATE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 32. | 211-7710 | [1] | COVER AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 33. | 211-8285 | [1] | PLATE | |
| 34. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| 35. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 36. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 37. | 5P-8523 | [1] | GROMMET | |
| 38. | 5P-8524 | [1] | GROMMET | |
| 39. | 6V-7743 M | [4] | LOCKNUT (M6X1-THD) | |
| 40. | 7X-2533 M | [3] | BOLT (M6X1X35-MM) | |
| 41. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
| 42. | 8C-8451 M | [1] | BOLT (M6X1X40-MM) | |
| 43. | 8M-2771 | [2] | CLIP | |
| 44. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 45. | 8T-4970 M | [10] | BOLT (M6X1X14-MM) | |
| 46. | 9X-2044 M | [6] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 47. | 090-4808 BD | SEAL | ||
| 48. | 6V-9335 BD | SEAL | ||
| 49. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 50. | 3S-2093 C | [6] | STRAP-CABLE | |
| 51. | 5F-9757 C | [2] | GROMMET | |
| 52. | 5P-6120 BCD | TRIM-EDGE | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520771
210-9583: CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYB1-UP
PART OF 234-0423 HYDRAULIC AR, 192-4677, 234-0426 HYDRAULIC AR-3 VALVE
Type 2
S/N AYB1-UP
PART OF 234-0423 HYDRAULIC AR, 192-4677, 234-0426 HYDRAULIC AR-3 VALVE
Type 2
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | |
| 2. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 3. | 6T-5600 C | [4] | BOSS | |
| 4. | 8R-3695 | [1] | GROMMET | |
| 5. | 8T-0328 | [6] | WASHER-HARD (5.5X10X1-MM THK) | |
| 6. | 9T-4735 | [1] | SPRING | |
| 7. | 9X-2026 | [8] | WASHER (6.5X17X1-MM THK) | |
| 8. | 105-2976 | [3] | FLANGE | |
| 9. | 105-3372 | [1] | SPRING | |
| 10. | 106-1582 | [1] | HOUSING | |
| 11. | 106-1584 | [2] | SPACER (6.22X9.52X85-MM THK) | |
| 12. | 114-4247 | [4] | BRACKET AS | |
| 13. | 114-8165 | [2] | ROD | |
| 14. | 139-1378 | [6] | BEARING | |
| 15. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 16. | 149-3949 | [3] | LEVER-CONTROL | |
| 17. | 150-6287 | [2] | SPACER (6.22X9.52X31-MM THK) | |
| 18. | 214-4862 CY | [3] | SENSOR GP-POSITION (CONTROL LEVER) | |
| 19. | 163-8119 | [3] | SPRING | |
| 20. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 21. | 210-6782 C | [1] | COVER | |
| 22. | 210-6780 C | [1] | COVER | |
| 23. | 188-0955 | [3] | COIL AS-DETENT (CONTROL LEVER) | |
| (EACH INCLUDES) | ||||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 24. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 25. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 26. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 27. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 28. | 207-7447 | [2] | PLATE | |
| 29. | 208-2479 | [2] | SPACER (10X13.1X5.5-MM THK) | |
| 30. | 208-8333 | [3] | COVER | |
| 31. | 211-7708 | [1] | PLATE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 32. | 211-7710 | [1] | COVER AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 33. | 211-8285 | [1] | PLATE | |
| 34. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| 35. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 36. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 37. | 5P-8523 | [1] | GROMMET | |
| 38. | 5P-8524 | [1] | GROMMET | |
| 39. | 6V-7743 M | [4] | LOCKNUT (M6X1-THD) | |
| 40. | 7X-2533 M | [3] | BOLT (M6X1X35-MM) | |
| 41. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
| 42. | 8C-8451 M | [1] | BOLT (M6X1X40-MM) | |
| 43. | 8M-2771 | [2] | CLIP | |
| 44. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 45. | 8T-4970 M | [10] | BOLT (M6X1X14-MM) | |
| 46. | 9X-2044 M | [3] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 47. | 090-4808 BD | SEAL | ||
| 48. | 6V-9335 BD | SEAL | ||
| 49. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 50. | 3S-2093 C | [3] | STRAP-CABLE | |
| 51. | 5F-9757 | [2] | GROMMET | |
| 52. | 5P-6120 BD | TRIM-EDGE | ||
| 53. | 8L-8413 C | [3] | STRAP-CABLE (WHITE) | |
| 54. | 9X-2045 M | [3] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520772
210-9583: CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AYB735-UP
PART OF 192-4677, 234-0426 HYDRAULIC AR-3 VALVE
S/N AYB735-UP
PART OF 192-4677, 234-0426 HYDRAULIC AR-3 VALVE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | |
| 2. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 3. | 262-6873 | [2] | SPACER | |
| 4. | 8R-3695 | [1] | GROMMET | |
| 5. | 8T-0328 | [6] | WASHER-HARD (5.5X10X1-MM THK) | |
| 6. | 9N-6249 | [1] | SPRING-RETAINING | |
| 7. | 9X-2026 | [8] | WASHER (6.5X17X1-MM THK) | |
| 8. | 105-2976 | [2] | FLANGE | |
| 9. | 105-3372 | [1] | SPRING | |
| 10. | 106-1582 | [1] | HOUSING | |
| 11. | 106-1584 | [2] | SPACER (6.22X9.52X85-MM THK) | |
| 12. | 114-4247 | [4] | BRACKET AS | |
| 13. | 114-8165 | [2] | ROD | |
| 14. | 139-1378 | [6] | BEARING | |
| 15. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 16. | 149-3949 | [3] | LEVER-CONTROL | |
| 17. | 262-6875 | [2] | SPACER | |
| 18. | 214-4862 Y | [3] | SENSOR GP-POSITION (CONTROL LEVER) | |
| 19. | 163-8119 | [3] | SPRING | |
| 20. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 21. | 210-6782 | [1] | COVER | |
| 22. | 238-2771 C | [1] | COVER | |
| 23. | 188-0955 | [3] | COIL AS-DETENT (CONTROL LEVER) | |
| (EACH INCLUDES) | ||||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 24. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 25. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 26. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 27. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 28. | 207-7447 | [2] | PLATE | |
| 29. | 208-2479 | [2] | SPACER (10X13.1X5.5-MM THK) | |
| 30. | 208-8333 | [3] | COVER | |
| 31. | 262-6870 C | [1] | PLATE AS | |
| 32. | 211-7710 | [1] | COVER AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 33. | 211-8285 | [1] | PLATE | |
| 34. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| 35. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 36. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 37. | 5P-8523 | [1] | GROMMET | |
| 38. | 5P-8524 | [1] | GROMMET | |
| 39. | 6V-7743 M | [4] | LOCKNUT (M6X1-THD) | |
| 40. | 7X-2533 M | [3] | BOLT (M6X1X35-MM) | |
| 41. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
| 42. | 8C-8451 M | [1] | BOLT (M6X1X40-MM) | |
| 43. | 8M-2771 | [2] | CLIP | |
| 44. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 45. | 8T-4970 M | [10] | BOLT (M6X1X14-MM) | |
| 46. | 9X-2044 M | [3] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 47. | 090-4808 D | SEAL (0.16-M) | ||
| 47A. | 090-4808 D | [2] | SEAL (0.07-M EACH) | |
| 48. | 6V-9335 CD | SEAL (0.16-M) | ||
| 48A. | 6V-9335 CD | SEAL (0.50-M) | ||
| 49. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 50. | 3S-2093 | [3] | STRAP-CABLE | |
| 51. | 5F-9757 | [2] | GROMMET | |
| 52. | 5P-6120 D | TRIM-EDGE (0.85-M) | ||
| 53. | 8L-8413 | [3] | STRAP-CABLE (WHITE) | |
| 54. | 9X-2043 CM | [3] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 55. | 262-6872 | [1] | PLATE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520773
213-6015: CONTROL GP-ELECTROHYDRAULIC
213-6015 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N AYB638-UP
CANNOT BE USED WITH @@@@@266-0521@@@@@, @@@@@189-4829@@@@@, @@@@@192-4677@@@@@, @@@@@234-0423@@@@@, @@@@@217-0955@@@@@, @@@@@239-3430@@@@@, @@@@@257-6118@@@@@, @@@@@218-3833@@@@@, @@@@@233-0208@@@@@, @@@@@233-0209@@@@@
S/N AYB638-UP
CANNOT BE USED WITH @@@@@266-0521@@@@@, @@@@@189-4829@@@@@, @@@@@192-4677@@@@@, @@@@@234-0423@@@@@, @@@@@217-0955@@@@@, @@@@@239-3430@@@@@, @@@@@257-6118@@@@@, @@@@@218-3833@@@@@, @@@@@233-0208@@@@@, @@@@@233-0209@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 3. | 205-8210 | [1] | CUSHION AS | |
| 4. | 205-8211 | [1] | PLATE | |
| 5. | 205-8212 | [1] | CUSHION AS | |
| 6. | 210-6783 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 7. | 213-6016 | [1] | BRACKET AS | |
| 6V-9632 M | [18] | NUT-WELD (M6X1-THD) | ||
| 188-9038 | [3] | BOSS | ||
| 8. | 213-6020 | [1] | COVER | |
| 9. | 226-8664 Y | [1] | CONTROL GP-JOYSTICK (2-FUNCTION) | |
| 10. | 233-6564 | [1] | FILM-CONTROL (JOYSTICK, 2-FUNCTION) | |
| 11. | 236-2526 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 180-0050 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 12. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 13. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 16. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 19. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 20. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 21. | 9X-2044 M | [16] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 22. | 5P-6120 D | TRIM-EDGE (0.7-M) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520774
218-3833: CONTROL GP-ELECTROHYDRAULIC
218-3833 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N AYB638-UP
FOR USE WITH @@@@@192-4677@@@@@, @@@@@234-0423@@@@@, @@@@@217-0955@@@@@, @@@@@239-3430@@@@@
CANNOT BE USED WITH @@@@@189-4829@@@@@, @@@@@257-6118@@@@@, @@@@@266-0521@@@@@, @@@@@213-6015@@@@@, @@@@@233-0208@@@@@, @@@@@233-0209@@@@@
S/N AYB638-UP
FOR USE WITH @@@@@192-4677@@@@@, @@@@@234-0423@@@@@, @@@@@217-0955@@@@@, @@@@@239-3430@@@@@
CANNOT BE USED WITH @@@@@189-4829@@@@@, @@@@@257-6118@@@@@, @@@@@266-0521@@@@@, @@@@@213-6015@@@@@, @@@@@233-0208@@@@@, @@@@@233-0209@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 3. | 205-8210 | [1] | CUSHION AS | |
| 4. | 205-8211 | [1] | PLATE | |
| 5. | 205-8212 | [1] | CUSHION AS | |
| 6. | 210-6783 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 7. | 213-6016 | [1] | BRACKET AS | |
| 6V-9632 M | [18] | NUT-WELD (M6X1-THD) | ||
| 188-9038 | [3] | BOSS | ||
| 8. | 213-6020 | [1] | COVER | |
| 9. | 226-8665 Y | [1] | CONTROL GP-JOYSTICK (3-FUNCTION) | |
| 10. | 233-6566 | [1] | FILM-CONTROL (JOYSTICK, 3-FUNCTION) | |
| 11. | 236-2526 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 7K-1181 | [1] | STRAP-CABLE | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 180-0050 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT-PLUG INCLUDES PLUG ASSEMBLY & WEDGE) | ||||
| 12. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 13. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 16. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 19. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 20. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 21. | 9X-2044 M | [16] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 22. | 5P-6120 BD | TRIM-EDGE | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520775
233-0208: CONTROL GP-ELECTROHYDRAULIC
233-0208 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION WITH AUTODIG
S/N AYB638-UP
Type 1
FOR USE WITH @@@@@189-4829@@@@@, @@@@@257-6118@@@@@, @@@@@266-0521@@@@@
CANNOT BE USED WITH @@@@@192-4677@@@@@, @@@@@234-0423@@@@@, @@@@@217-0955@@@@@, @@@@@239-3430@@@@@, @@@@@218-3833@@@@@, @@@@@233-0209@@@@@, @@@@@213-6015@@@@@
S/N AYB638-UP
Type 1
FOR USE WITH @@@@@189-4829@@@@@, @@@@@257-6118@@@@@, @@@@@266-0521@@@@@
CANNOT BE USED WITH @@@@@192-4677@@@@@, @@@@@234-0423@@@@@, @@@@@217-0955@@@@@, @@@@@239-3430@@@@@, @@@@@218-3833@@@@@, @@@@@233-0209@@@@@, @@@@@213-6015@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 3. | 205-8210 | [1] | CUSHION AS | |
| 4. | 205-8211 | [1] | PLATE | |
| 5. | 205-8212 | [1] | CUSHION AS | |
| 6. | 210-6783 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 7. | 213-6016 | [1] | BRACKET AS | |
| 6V-9632 M | [18] | NUT-WELD (M6X1-THD) | ||
| 188-9038 | [3] | BOSS | ||
| 8. | 213-6020 | [1] | COVER | |
| 9. | 220-6102 Y | [1] | CONTROL GP-JOYSTICK (2-FUNCTION WITH AUTODIG) | |
| 10. | 233-6565 | [1] | FILM-CONTROL (JOYSTICK, 2-FUNCTION WITH AUTODIG) | |
| 11. | 236-2526 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 180-0050 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 12. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 13. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 16. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 19. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 20. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 21. | 9X-2044 M | [16] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 22. | 5P-6120 D | TRIM-EDGE (0.4-M) | ||
| 22A. | 5P-6120 D | TRIM-EDGE (0.115-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520776
233-0208: CONTROL GP-ELECTROHYDRAULIC
233-0208 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION WITH AUTODIG
S/N AYB638-UP
Type 2
FOR USE WITH @@@@@189-4829@@@@@, @@@@@257-6118@@@@@, @@@@@266-0521@@@@@
CANNOT BE USED WITH @@@@@192-4677@@@@@, @@@@@234-0423@@@@@, @@@@@217-0955@@@@@, @@@@@239-3430@@@@@, @@@@@218-3833@@@@@, @@@@@233-0209@@@@@, @@@@@213-6015@@@@@
S/N AYB638-UP
Type 2
FOR USE WITH @@@@@189-4829@@@@@, @@@@@257-6118@@@@@, @@@@@266-0521@@@@@
CANNOT BE USED WITH @@@@@192-4677@@@@@, @@@@@234-0423@@@@@, @@@@@217-0955@@@@@, @@@@@239-3430@@@@@, @@@@@218-3833@@@@@, @@@@@233-0209@@@@@, @@@@@213-6015@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 3. | 205-8210 | [1] | CUSHION AS | |
| 4. | 205-8211 | [1] | PLATE | |
| 5. | 213-6016 | [1] | BRACKET AS | |
| 6V-9632 M | [18] | NUT-WELD (M6X1-THD) | ||
| 188-9038 | [3] | BOSS | ||
| 6. | 213-6020 | [1] | COVER | |
| 7. | 220-6102 Y | [1] | CONTROL GP-JOYSTICK (2-FUNCTION WITH AUTODIG) | |
| 8. | 233-6565 | [1] | FILM-CONTROL (JOYSTICK, 2-FUNCTION WITH AUTODIG) | |
| 9. | 236-2526 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 180-0050 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 8T-8730 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 218-4935 | [1] | SUPPRESSOR-ARC | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 10. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 11. | 8T-4205 C | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 13. | 9X-2044 CM | [12] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 14. | 5P-6120 D | TRIM-EDGE (0.4-M) | ||
| 14A. | 5P-6120 D | TRIM-EDGE (0.2-M EACH) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520777
233-0209: CONTROL GP-ELECTROHYDRAULIC
233-0209 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION WITH AUTODIG
S/N AYB638-UP
FOR USE WITH @@@@@217-0955@@@@@, @@@@@234-0423@@@@@, @@@@@192-4677@@@@@, @@@@@189-4829@@@@@, @@@@@257-6118@@@@@, @@@@@266-0521@@@@@, @@@@@239-3430@@@@@
CANNOT BE USED WITH @@@@@213-6015@@@@@, @@@@@218-3833@@@@@, @@@@@233-0208@@@@@
S/N AYB638-UP
FOR USE WITH @@@@@217-0955@@@@@, @@@@@234-0423@@@@@, @@@@@192-4677@@@@@, @@@@@189-4829@@@@@, @@@@@257-6118@@@@@, @@@@@266-0521@@@@@, @@@@@239-3430@@@@@
CANNOT BE USED WITH @@@@@213-6015@@@@@, @@@@@218-3833@@@@@, @@@@@233-0208@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 3. | 205-8210 | [1] | CUSHION AS | |
| 4. | 205-8211 | [1] | PLATE | |
| 5. | 205-8212 | [1] | CUSHION AS | |
| 6. | 208-6060 Y | [1] | CONTROL GP-JOYSTICK (3-FUNCTION WITH AUTODIG) | |
| 7. | 210-6783 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8. | 213-6016 | [1] | BRACKET AS | |
| 6V-9632 M | [18] | NUT-WELD (M6X1-THD) | ||
| 188-9038 | [3] | BOSS | ||
| 9. | 213-6020 | [1] | COVER | |
| 10. | 233-6567 | [1] | FILM-CONTROL (JOYSTICK, 3-FUNCTION, AUTODIG) | |
| 11. | 236-2526 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 7K-1181 | [1] | STRAP-CABLE | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 180-0050 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 12. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 13. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 16. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 19. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 20. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 21. | 9X-2044 M | [16] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 22. | 5P-6120 D | TRIM-EDGE (0.4-M) | ||
| 22A. | 5P-6120 D | TRIM-EDGE (0.115-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520778
206-7417: CONTROL GP-HANDLE
206-7417 CONTROL GP-HANDLE -LIFT, TILT, AUXILIARY
S/N AYB638-UP
PART OF 226-8665 CONTROL GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@446-4917@@@@@
S/N AYB638-UP
PART OF 226-8665 CONTROL GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@446-4917@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9B-1117 | [2] | LOCKWASHER | |
| 2. | 175-4170 | [2] | SCREW-PAN HEAD (6-19X1.625-IN) | |
| 3. | 345-7994 | [1] | CONTROL GP-SWITCH (JOYSTICK) | |
| 4. | 208-6081 | [1] | SLEEVE | |
| 5. | 218-7136 E | SLEEVE (36-CM) | ||
| 6. | 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | |
| 7. | 6V-1614 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.5-M EACH) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP33520779
206-7419: CONTROL GP-HANDLE
206-7419 CONTROL GP-HANDLE -LIFT, TILT, AUTODIG
S/N AYB638-UP
PART OF 220-6102 CONTROL GP-JOYSTICK
S/N AYB638-UP
PART OF 220-6102 CONTROL GP-JOYSTICK
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 175-4170 | [2] | SCREW-PAN HEAD (6-19X1.625-IN) | |
| 2. | 9B-1117 | [2] | LOCKWASHER | |
| 3. | 6V-1668 | [1] | WASHER (6.5X29.1X3-MM THK) | |
| 4. | Z | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 4A. | Z | [1] | SWITCH AS-PUSH BUTTON (AUTODIG) | |
| 5. | 144-0331 | [2] | CAP-PUSH BUTTON (YELLOW) | |
| 6. | 218-7136 B | SLEEVE (36-CM) | ||
| 7. | 6V-1614 | [1] | TUBE-HEAT SHRINK (9.52-MM DIA) | |
| 8. | 208-6081 | [1] | SLEEVE | |
| B | USE AS REQUIRED | |||
| Z | NOT SERVICED SEPARATELY | |||
