AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

191-1888 INSTALLATION GP-CONTROLS S/N AYB1-UP PART OF 185-7634 OPERATOR AR, 204-4487 OPERATOR AR-OPEN ROPS 950G II


OPERATOR STATION
INSTALLATION GP-CONTROLS
RADIO GP
CAB GP
SEAT GP
CAB GP

WHEEL LOADER 950G II WHEEL LOADER AYB
 950G II Wheel Loader AYB00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3352 950G II AYB   (1999)

OPERATOR STATION

INSTALLATION GP-CONTROLS
INSTALLATION GP-CONTROLS
191-1888 INSTALLATION GP-CONTROLS
INSTALLATION GP-CONTROLS
245-7646 INSTALLATION GP-CONTROLS
 

#SEBP33520820
 

191-1888: INSTALLATION GP-CONTROLS

191-1888 INSTALLATION GP-CONTROLS
S/N AYB1-UP
PART OF 185-7634 OPERATOR AR, 204-4487 OPERATOR AR-OPEN ROPS
i01483560 SEBP3352
1911888 INSTALLATION GP-CONTROLS Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-0830 [1] END-YOKE ROD  
2. 096-0067 [1] PIN-CLEVIS  
3. 173-2115 J [1] FLOOR MAT  
4. 5B-9192 [1] PIN-COTTER  
5. 5C-2874 M [1] NUT (M5X0.8-THD)  
  J   REMOVE THE PERFORATED HOLE IN THE FLOORMAT WHEN INSTALLING SWITCH GP-ROADING
  M   METRIC PART
 

#SEBP33520821
 

245-7646: INSTALLATION GP-CONTROLS

245-7646 INSTALLATION GP-CONTROLS
S/N AYB756-UP
PART OF 204-4487 OPERATOR AR-OPEN ROPS
i02117411 SEBP3352
2457646 INSTALLATION GP-CONTROLS Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-0830 [1] END-YOKE ROD  
2. 243-4860 [1] FLOOR MAT  
3. 096-0067 [1] PIN-CLEVIS  
4. 5B-9192 [1] PIN-COTTER  
5. 5C-2874 M [1] NUT (M5X0.8-THD)  
  M   METRIC PART
 

#SEBP33520822
 

171-8883: INSTALLATION GP-RADIO

171-8883 INSTALLATION GP-RADIO
S/N AYB1-UP
PART OF 185-7632 CAB AR
i01373783 SEBP3352
1718883 INSTALLATION GP-RADIO Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
3. 6T-7695 [2] SPEAKER AS-RADIO  
4. 9U-2331 [1] ANTENNA AS (COMMUNICATION RADIO)  
5. 9U-4431 [1] MOUNT-ANTENNA  
6. 9U-8263 [1] COVER  
8. 173-2200 [1] CABLE AS  
10. 011-7960 [1] GROMMET  
12. 8T-0328 [8] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-0337 M [8] SCREW-MACHINE (M4X0.7X12-MM)  
14. 8T-2268 D [2] TRIM (.06M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP33520823
 

191-0154: INSTALLATION GP-RADIO

191-0154 INSTALLATION GP-RADIO -CB
S/N AYB1-UP
i01590539 SEBP3352
1910154 INSTALLATION GP-RADIO Parts scheme 1910154 INSTALLATION GP-RADIO Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7K-1181 [1] STRAP-CABLE  
3. 9U-2332 [2] ANTENNA AS (CB)  
4. 9U-4431 [1] MOUNT-ANTENNA  
5. 184-3579 [1] CONVERTER-POWER (20-AMPERE)(24-VOLT TO 12-VOLT)  
6. 187-5409 [1] HARNESS AS-RADIO  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  177-9656 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS & WEDGE)
7. 191-5114 [2] CABLE AS (COAX)  
8. 208-3777 [1] BRACKET  
9. 208-3778 [1] BRACKET  
10. 208-3779 [1] BRACKET AS  
11. 2D-0388 [2] GROMMET (25.4-MM ID)  
12. 5C-9553 M [2] BOLT (M6X1X16-MM)  
13. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 6V-7357 M [4] BOLT (M6X1X25-MM)  
15. 6V-9673 M [4] SCREW-MACHINE (M5X0.8X12-MM)  
16. 9U-2330 [1] MOUNT-ANTENNA  
17. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP33520824
 

233-7658: KIT-REPAIR

233-7658 KIT-REPAIR
S/N AYB1-UP
FOR USE WITH SEPD0689 - INSERT REPLACEMENT FOR NON-METALLIC CAB FLOORS
i05770515 SEBP3352
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INCLUDES 10 INSERTS M10X1.5-THD, 10 INSERTS M8X1.25-THD, & 10 INSERTS M6X1-THD)
 

#SEBP33520825
 

397-6405: KIT-SEAT AIR COMPRESSOR

397-6405 KIT-SEAT AIR COMPRESSOR
S/N AYB684-UP
PART OF 191-2933 SUSPENSION GP-SEAT
FIELD REPLACEMENT FOR @@@@@237-3970@@@@@
i05926695 SEBP3352
3976405 KIT-SEAT AIR COMPRESSOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8413 [1] STRAP-CABLE (WHITE)  
2. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
3. 370-9894 [1] COMPRESSOR AS  
4. 372-2158 [1] BRACKET-MOUNTING  
5. 387-0314 [1] WIRE AS (16-GA, ORANGE)  
6. 387-0317 [1] WIRE AS (16-GA, BLACK)  
 

#SEBP33520826
 

212-7779: KIT-SHOCK ABSORBER

212-7779 KIT-SHOCK ABSORBER
S/N AYB684-UP
PART OF 191-2933, 199-5725 SUSPENSION GP-SEAT
i05772910 SEBP3352
2127779 KIT-SHOCK ABSORBER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 7D-6922 [1] LOCKNUT (6-32-THD)  
3. 114-5157 [2] ADJUSTER  
4. 138-8885 [1] BOLT-SOCKET HEAD (6-32X0.5-IN)  
5. 163-1137 [2] BEARING  
6. 192-7811 [2] WASHER (13X22X2-MM THK)  
7. 192-7812 [1] BOLT-SPECIAL  
8. 192-7813 [1] BOLT-SPECIAL  
9. 212-7780 [1] ABSORBER AS-SHOCK  
10. 212-7783 [1] KIT-PULLEY  
    (INCLUDES PARTS MARKED "H" IN GRAPHIC)
11. 213-4754 [1] KNOB  
12. 9M-2904 [1] CLAMP-HOSE  
13. 377-3141 [1] CABLE AS  
14. 138-8886 [1] BOLT-SOCKET HEAD (1/4-20X1.5-IN)  
15. 2D-6235 [3] LOCKNUT (1/4-20-THD)  
16. 2D-6642 [1] BALL  
17. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
18. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP33520827
 

171-8882: LINER GP-CAB

171-8882 LINER GP-CAB
S/N AYB1-UP
PART OF 185-7632 CAB AR
i01548328 SEBP3352
1718882 LINER GP-CAB Parts scheme 1718882 LINER GP-CAB Parts scheme 1718882 LINER GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-4509 [2] PLATE  
2. 5P-7958 [1] SLEEVE-CABLE SPLICE  
3. 6V-8928 [2] HOOK-COAT  
4. 8T-6842 [1] FILM-INSTRUCTION (PULL RING, ALTERNATE EXIT)  
5. 160-9925 [1] LANYARD  
6. 161-3415 [1] STRAP  
7. 173-2178 [1] INSULATION  
8. 173-2185 [1] LINER-CAB  
9. 173-2187 [1] COVER AS  
10. 178-4323 [9] CAP  
11. 180-3450 [1] COVER  
12. 187-1472 [1] COVER  
13. 187-1473 [1] COVER  
14. 187-1475 [1] COVER  
15. 190-5497 [1] COVER AS  
16. 197-2027 [1] BRACKET AS  
17. 197-2072 [1] COVER  
18. 200-9006 [1] FILM (FUSE PANEL)  
19. 205-6455 [2] SPACER (10X16X20-MM THK)  
20. 210-5551 [1] TRAY  
21. 211-0667 [1] COVER AS  
22. 222-3686 [1] BRACKET (LH)  
23. 222-3687 [1] BRACKET (RH)  
24. 233-5036 [2] ANGLE AS  
25. 142-2304 M [2] SCREW-BUTTON HEAD (M8X1.25X35-MM)  
26. 5C-7261 M [4] NUT (M8X1.25-THD)  
27. 8D-6542 [2] GROMMET  
28. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
30. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
31. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
32. 9X-2040 M [6] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
33. 9X-2042 M [10] SCREW-TRUSS HEAD (M6X1X12-MM)  
34. 9X-2045 M [8] SCREW-TRUSS HEAD (M6X1X20-MM)  
35. 9X-2046 M [4] SCREW-TRUSS HEAD (M6X1X35-MM)  
36. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
37. 5P-5927 D SEAL (80-M)  
38. 128-2596 D SEAL (90-M)  
39. 8T-9005 E SEAL (46-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP33520828
 

204-3719: LINER GP-CAB

204-3719 LINER GP-CAB
S/N AYB1-741
PART OF 204-4489 CANOPY AR-OPEN ROPS
i01588978 SEBP3352
2043719 LINER GP-CAB Parts scheme 2043719 LINER GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-4509 [2] PLATE  
2. 6V-8928 [2] HOOK-COAT  
3. 8C-3426 [1] LOCK GP-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
4. 107-5014 [1] KNOB  
5. 161-3415 [1] STRAP  
6. 173-2185 [1] LINER-CAB  
7. 173-2187 [1] COVER AS  
8. 177-4494 [1] BRACKET AS  
9. 178-4323 [9] CAP  
10. 178-5148 [2] ANGLE AS  
11. 197-2027 [1] BRACKET AS  
12. 200-9006 [1] FILM (FUSE PANEL)  
13. 201-1699 [1] BRACKET AS  
14. 206-0033 [1] COVER AS  
15. 209-8310 [1] COVER  
16. 209-8312 [1] PLATE  
17. 209-8313 [1] DOOR AS  
18. 129-3178 M [1] LOCKNUT (M6X1-THD)  
19. 5C-2890 M [4] NUT (M6X1-THD)  
20. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
22. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
23. 9X-2040 M [6] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
24. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
25. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
26. 9X-2045 M [12] SCREW-TRUSS HEAD (M6X1X20-MM)  
27. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
28. 9X-8256 [11] WASHER (6.6X12X2-MM THK)  
29. 5P-5637 D SEAL (0.8-M)  
30. 103-2543 E SEAL (32-CM)  
31. 209-8315 E SEAL (65-CM)  
32. 7X-7877 E STRIP-EDGE (150-CM)  
33. 7X-7898 E TRIM (120-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP33520829
 

204-3719: LINER GP-CAB

204-3719 LINER GP-CAB
S/N AYB742-UP
PART OF 204-4489 CANOPY AR-OPEN ROPS
i02136021 SEBP3352
2043719 LINER GP-CAB Parts scheme 2043719 LINER GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-4509 [2] PLATE  
2. 6V-8928 C [1] HOOK-COAT  
3. 233-4466 C [1] LATCH AS  
4. 233-4463 C [1] CAM  
5. 161-3415 [1] STRAP  
6. 173-2185 [1] LINER-CAB  
7. 173-2187 [1] COVER AS  
8. 222-3686 [1] BRACKET (LH)  
9. 178-4323 C [11] CAP  
10. 233-5036 C [2] ANGLE AS  
    (EACH INCLUDES)
  4E-3956 M [2] BOSS (M6X1X15-MM)  
11. 197-2027 [1] BRACKET AS  
12. 200-9006 [1] FILM (FUSE PANEL)  
13. 222-3687 [1] BRACKET (RH)  
14. 206-0033 [1] COVER AS  
15. 209-8310 [1] COVER  
16. 209-8312 [1] PLATE  
17. 233-1643 C [1] DOOR AS-ACCESS  
18. 8T-4224 C [4] WASHER-HARD (8.8X16X2-MM THK)  
19. 5C-7261 CM [4] NUT (M8X1.25-THD)  
20. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
22. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
23. 9X-2040 M [6] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
24. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
25. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
26. 9X-2045 CM [13] SCREW-TRUSS HEAD (M6X1X20-MM)  
27. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
28. 9X-8256 C [6] WASHER (6.6X12X2-MM THK)  
29. 5P-5643 CD SEAL (10.8-CM)  
30. 103-2543 E SEAL (32-CM EACH)  
31. 209-8315 CE SEAL (70-CM)  
32. 7X-7877 CE STRIP-EDGE (199-CM)  
33. 7X-7898 E TRIM (19.3-CM EACH)  
33A. 7X-7898 E TRIM (28.8-CM)  
33B. 7X-7898 E TRIM (52.7-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 950G II :

HORN GP-ELECTRIC
211-1338 HORN GP-ELECTRIC
HORN GP-ELECTRIC
200-4152 HORN GP-ELECTRIC
HEATER GP-CAB
191-1855 HEATER GP-CAB
HEATER GP-CAB
183-9293 HEATER GP-CAB
GUARD GP-WINDOW
241-8650 GUARD GP-WINDOW
GUARD GP-WINDOW
240-4542 GUARD GP-WINDOW
GUARD GP-VANDALISM
204-4125 GUARD GP-VANDALISM
FLOOR GP-SOUND SUPPRESSION
263-5734 FLOOR GP-SOUND SUPPRESSION
INSTALLATION GP-CONTROLS
245-7646 INSTALLATION GP-CONTROLS
INSTALLATION GP-RADIO
171-8883 INSTALLATION GP-RADIO
INSTALLATION GP-RADIO
191-0154 INSTALLATION GP-RADIO
233-7658 KIT-REPAIR
KIT-SEAT AIR COMPRESSOR
397-6405 KIT-SEAT AIR COMPRESSOR
KIT-SHOCK ABSORBER
212-7779 KIT-SHOCK ABSORBER
LINER GP-CAB
171-8882 LINER GP-CAB
LINER GP-CAB
204-3719 LINER GP-CAB

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.