AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

250-8276 SEAT GP-SUSPENSION -HEATED, 24-VOLT S/N AYB1-UP PART OF 257-6118, 266-0521 MACHINE AR FOR USE WITH 250-3730 HYDRAULIC AR-MACHINE, 250-3731 HYDRAULIC AR-MACHINE, 250-3728 HYDRAULIC AR-MACHINE, 250-3729 HYDRAULIC AR-MACHINE CANNOT BE USED WITH 204-7243 OPERATOR AR-OPEN ROPS, 204-4488 OPERATOR AR-OPEN ROPS, 204-4487 OPERATOR AR-OPEN ROPS 950G II


OPERATOR STATION
SEAT GP
CAB GP
SUPPORT GP
SUPPRESSION GP
SEAT GP

WHEEL LOADER 950G II WHEEL LOADER AYB
 950G II Wheel Loader AYB00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3352 950G II AYB   (1999)

OPERATOR STATION

SEAT GP
248-6193 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
248-6193 SEAT GP-SUSPENSION
250-8276 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
267-9431 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
267-9433 SEAT GP-SUSPENSION
SUSPENSION GP-SEAT
172-9444 SUSPENSION GP-SEAT
 

#SEBP33520900
 

250-8276: SEAT GP-SUSPENSION

250-8276 SEAT GP-SUSPENSION -HEATED, 24-VOLT
S/N AYB1-UP
PART OF 257-6118, 266-0521 MACHINE AR
FOR USE WITH 250-3730 HYDRAULIC AR-MACHINE, 250-3731 HYDRAULIC AR-MACHINE, 250-3728 HYDRAULIC AR-MACHINE, 250-3729 HYDRAULIC AR-MACHINE
CANNOT BE USED WITH 204-7243 OPERATOR AR-OPEN ROPS, 204-4488 OPERATOR AR-OPEN ROPS, 204-4487 OPERATOR AR-OPEN ROPS
i02106188 SEBP3352
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  248-6193 Y [1] SEAT GP-SUSPENSION (HEATED, 24-VOLT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520901
 

267-9431: SEAT GP-SUSPENSION

267-9431 SEAT GP-SUSPENSION
S/N AYB1-UP
PART OF 248-6193 SEAT GP-SUSPENSION
i03744058 SEBP3352
2679431 SEAT GP-SUSPENSION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-1288 [4] LOCKNUT-FLANGE (3/8-16-THD)  
2. 171-1230 [3] SCREW-BUTTON HEAD (3/8-16X1-IN)  
3. 180-9617 [1] BRACKET AS  
4. 188-9820 Y [1] ARMREST GP (LH)  
5. 267-9433 Y [1] SEAT GP-SUSPENSION (CLOTH)  
6. 4L-6454 [1] BOLT (3/8-16X1-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520902
 

267-9433: SEAT GP-SUSPENSION

267-9433 SEAT GP-SUSPENSION -CLOTH
S/N AYB1-UP
PART OF 267-9431 SEAT GP-SUSPENSION
i03744089 SEBP3352
2679433 SEAT GP-SUSPENSION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-5042 [2] SPACER (11.1X19.5X9.67-MM THK)  
2. 143-1288 [8] LOCKNUT-FLANGE (3/8-16-THD)  
3. 171-6682 [1] BAR  
4. 172-2416 [2] PIN  
5. 173-1028 Y [1] ADJUSTER GP-SEAT  
6. 177-1863 [2] BOLT-PIVOT (3/8-16X2.89-IN)  
7. 184-2298 [1] ROD  
8. 184-2299 [4] WASHER (7X25.4X2.54-MM THK)  
9. 210-2270 Y [1] RECLINER GP-SEAT  
10. 218-2529 [3] PLUG  
11. 223-8340 [1] ROD  
12. 223-8341 [1] COVER  
13. 226-7674 Y [1] PAN GP-BACKREST  
14. 241-5785 Y [1] PAN GP-SEAT (CLOTH, HEATED)  
15. 267-9546 [1] CUSHION AS-SEAT (CLOTH, HEATED)  
16. 095-0843 [2] PIN-COTTER  
17. 171-1230 [6] SCREW-BUTTON HEAD (3/8-16X1-IN)  
18. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 5V-1496 [2] RETAINER  
20. 6V-7646 [2] WASHER-HARD (7.2X25X2-MM THK)  
21. 6V-8969 [4] SCREW-BUTTON HEAD (1/4-20X0.5-IN)  
22. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
23. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520903
 

156-0549: STEERING COLUMN GP

156-0549 STEERING COLUMN GP
S/N AYB1-UP
PART OF 171-8885, 219-7619 CONTROL GP-STEERING
i01227108 SEBP3352
1560549 STEERING COLUMN GP Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-8867 [1] KIT-GAS ASSIST (STEERING COLUMN)  
2. 149-2906 [1] KIT-NUT (STEERING COLUMN)  
3. 149-2907 [1] KIT-TILT LEVER (STEERING COLUMN)  
4. 156-4315 [1] KIT-SHAFT (STEERING COLUMN)  
5. 149-0774 [1] KIT-HOUSING (STEERING COLUMN)  
6. 254-1519 [1] COVER  
 

#SEBP33520904
 

198-8771: SUPPORT GP-HYDRAULIC CONTROL

198-8771 SUPPORT GP-HYDRAULIC CONTROL
S/N AYB1-UP
PART OF 185-7632 CAB AR, 204-4489 CANOPY AR-OPEN ROPS
i01447541 SEBP3352
1988771 SUPPORT GP-HYDRAULIC CONTROL Parts scheme 1988771 SUPPORT GP-HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2027 [1] WASHER (11X18X2-MM THK)  
2. 4E-6523 [1] SUPPORT-SLIDE  
3. 4E-8722 [2] NUT (RETAINER)  
4. 4E-9173 [2] SHAFT-CONTROL  
5. 4E-9174 [2] BEARING  
6. 7V-0445 [1] SPRING  
7. 7X-3310 [1] KNOB-BALL  
8. 9U-0952 [1] PIN  
9. 9U-0953 [1] GUIDE  
10. 9U-0954 [1] STUD  
11. 9U-0955 [1] PIN  
12. 9U-0958 [1] SLIDER  
13. 9U-3925 [4] RING-RETAINING  
14. 9U-3926 [2] STOP  
15. 9U-3927 [1] BEARING  
16. 137-6841 B [2] SHIM (0.2-MM THK)  
17. 173-2217 [1] CUSHION AS  
18. 198-8767 [1] CUSHION AS  
19. 198-8768 [1] BRACKET AS  
20. 200-0728 [1] BRACKET  
21. 200-0729 [1] BRACKET  
22. 198-8769 [1] CONSOLE AS  
23. 198-8770 [1] COVER  
24. 174-4301 [1] LEVER AS  
25. 179-1235 [1] CUSHION AS  
26. 203-9991 [3] KNOB AS  
27. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
28. 3K-4897 [1] PIN-SPRING  
29. 5C-7261 M [4] NUT (M8X1.25-THD)  
30. 6V-9327 M [4] SETSCREW-SOCKET (M6X1-THD)  
31. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
32. 8T-4138 M [9] BOLT (M6X1X20-MM)  
33. 8T-4205 [9] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
35. 9X-2038 [9] WASHER (7X19X2-MM THK)  
36. 9X-2044 M [9] SCREW-TRUSS HEAD (M6X1X16-MM)  
37. 9X-2616 M [2] SCREW-SOCKET (M8X1.25X16-MM)  
38. 8Y-5746 [1] ASHTRAY  
39. 8Y-6333 [1] GASKET (ASHTRAY)  
40. 203-0328 [1] SPACER (16X19X9-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP33520905
 

265-2620: SUPPRESSION GP-CAB SOUND

265-2620 SUPPRESSION GP-CAB SOUND
S/N AYB1-UP
PART OF 267-7088 SUPPRESSION AR-SOUND
i02326113 SEBP3352
2652620 SUPPRESSION GP-CAB SOUND Parts scheme 2652620 SUPPRESSION GP-CAB SOUND Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-2407 [1] INSULATION  
2. 232-1335 [1] INSULATION  
3. 232-1336 [1] INSULATION  
4. 232-1337 [1] INSULATION  
5. 232-1338 [1] INSULATION  
6. 263-6711 [1] INSULATION  
7. 263-6712 [1] INSULATION  
8. 263-6714 [1] INSULATION  
9. 263-7084 [1] INSULATION  
10. 263-7085 [1] INSULATION  
11. 263-7086 [1] INSULATION  
12. 263-7087 [1] INSULATION  
13. 263-7088 [1] INSULATION  
14. 263-7089 [1] INSULATION  
15. 263-7090 [1] INSULATION  
 

#SEBP33520906
 

172-9444: SUSPENSION GP-SEAT

172-9444 SUSPENSION GP-SEAT -AIR
S/N AYB1-UP
24-VOLT
PART OF 178-7915, 207-2745 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
i01447778 SEBP3352
1729444 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-4818 [4] LOCKWASHER (EXTERNAL TOOTH)  
2. 4V-8556 [1] BOLT (3/8-16X2.20-IN)  
3. 8Y-6917 [1] BOOT  
4. 102-6317 [2] BUMPER  
5. 123-8157 [2] SHAFT  
6. 123-9131 [1] ABSORBER AS-SHOCK  
7. 124-7126 [1] SCISSORS AS  
8. 124-7128 [1] BUSHING-RELIEF  
9. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
10. 147-4549 [1] FITTING-ELBOW  
11. 147-6522 [1] SPRING  
12. 149-2399 [1] FITTING  
13. 149-2400 [1] FITTING  
14. 149-2403 [1] VALVE AS  
15. 160-7765 [1] WASHER (16.26X22.23X1.97-MM THK)  
16. 160-7766 B [3] WASHER (16.26X22.23X0.51-MM THK)  
17. 160-7767 B [8] WASHER (3.68X12.57X0.51-MM THK)  
18. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
19. 171-4045 [1] HOUSING AS  
20. 1B-4430 [4] NUT-JAM (1/2-20-THD)  
21. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
22. 4V-7884 [2] BEARING  
23. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
24. 6K-0806 [1] STRAP-CABLE  
25. 8L-8413 [4] STRAP-CABLE (WHITE)  
26. 8M-3267 [1] SCREW-HEX SOCKET (3/8-16X0.75-IN)  
27. 8Y-6922 [1] HOUSING AS  
28. 9M-0164 [1] CLAMP-HOSE  
29. 147-6541 E TUBE (29.4-CM)  
29A. 147-6541 E TUBE (0.9-CM)  
   
  203-7700 F [1] BOLT (3/8-16-THD)  
   
    AVAILABLE REPAIR KIT(S):
  149-2398 [1] KIT-AIR COMPRESSOR  
    (INCLUDES COMPRESSOR AS & SLEEVE)
  8Y-6928 [1] KIT-FASTENER  
    (INCLUDES CLIPS-RATCHET)
  123-9128 [1] KIT-ROLLER  
    (INCLUDES BEARINGS-FLANGED, ROLLERS, & TIE WRAP (SMALL))
  128-0613 [1] KIT-TETHER  
    (INCLUDES TETHER)
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
 

#SEBP33520907
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N AYB684-UP
PART OF 219-8094, 219-8095 SEAT GP-SUSPENSION
Type 1
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
i01960910 SEBP3352
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [33] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 192-7760 [1] SHAFT  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  211-5358 E CONDUIT-FLEXIBLE (64-CM)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 192-7822 [1] SHAFT  
23. 237-3943 [1] BRACKET  
24. 237-3970 Y [1] AIR COMPRESSOR GP-SEAT  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.267-M)  
31A. 5P-6010 D TUBE (0.356-M)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 B [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 ABY [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520908
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N AYB684-UP
PART OF 219-8094, 219-8095 SEAT GP-SUSPENSION
Type 2
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
i05781904 SEBP3352
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  211-5358 E CONDUIT-FLEXIBLE (64-CM)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
23. 372-2158 C [1] BRACKET-MOUNTING  
24. 370-9894 C [1] COMPRESSOR AS  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.27-M)  
31A. 5P-6010 D TUBE (0.36-M)  
32. 387-0314 C [1] WIRE AS (16-GA, ORANGE)  
33. 387-0317 C [1] WIRE AS (16-GA, BLACK)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 ABY [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520909
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N AYB684-UP
PART OF 219-8094, 219-8095 SEAT GP-SUSPENSION
Type 3
FIELD REPLACEMENT FOR @@@@@172-9444@@@@@
i05926665 SEBP3352
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 CY [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.27-M)  
31A. 5P-6010 D TUBE (0.36-M)  
32. 442-8151 C [1] CLIP-CABLE  
33. 3S-2093 C [4] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 ABY [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  397-6405 CY [1] KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G II :

SEAT GP-SUSPENSION
248-6193 SEAT GP-SUSPENSION
248-6193 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
219-8095 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
219-8094 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
207-2745 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
204-4492 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
204-4492 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
178-7915 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
267-9431 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
267-9433 SEAT GP-SUSPENSION
STEERING COLUMN GP
156-0549 STEERING COLUMN GP
SUPPORT GP-HYDRAULIC CONTROL
198-8771 SUPPORT GP-HYDRAULIC CONTROL
SUPPRESSION GP-CAB SOUND
265-2620 SUPPRESSION GP-CAB SOUND
SUSPENSION GP-SEAT
172-9444 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.