AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6V-5821 STARTING MOTOR GP-ELECTRIC S/N BFE1-118 24 VOLT PART OF 128-5626 STARTING MOTOR GP-ELECTRIC AN ATTACHMENT 325C


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
SWITCH GP
STARTING AID GP
WIRING GP

EXCAVATOR 325C EXCAVATOR BFE
 325C L Excavator BFE00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3353 325C BFE   (2000)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
128-5626 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
128-5626 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
201-4204 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1511 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-5821 STARTING MOTOR GP-ELECTRIC
 

#SEBP33530220
 

6V-5821: STARTING MOTOR GP-ELECTRIC

6V-5821 STARTING MOTOR GP-ELECTRIC
S/N BFE1-118
24 VOLT
PART OF 128-5626 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i00407582 SEBP3353
6V5821 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
2. 9X-4824 [1] COVER-STARTING MOTOR  
3. 2H-3429 [2] RING-RETAINING  
4. 4B-2049 [3] NUT (10-32-THD)  
5. 8F-1434 [2] LOCKWASHER  
6. 7T-3271 [1] CONNECTOR  
7. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 036-9823 [5] BOLT (1/4-28X1-IN)  
9. 7T-3277 [1] COIL AS-FIELD  
10. 3F-0379 [8] SCREW-POLE SHOE (3/8-24-THD)  
11. 7T-3276 [1] ARMATURE AS (24-VOLT)  
12. 8H-1141 [4] SHOE-POLE  
13. 7T-3454 [1] INSULATOR  
14. 7T-3279 [1] HOUSING AS  
15. 7T-3278 [1] HOLDER AS-BRUSH  
16. 3T-3422 [1] WIRE AS  
17. 8T-8566 [1] TERMINAL AS  
18. 7L-2894 NP [1] GASKET  
19. 6V-8188 [4] NUT (1/2-13-THD)  
20. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
21. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
22. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
23. 8T-8569 [1] INSULATOR-TERMINAL  
24. 9X-9511 [1] SOLENOID AS (24-VOLT)  
25. 036-9821 [1] WASHER  
26. 7T-3269 [1] BOOT  
27. 7T-3270 [1] PLUNGER AS  
28. 9M-7609 [1] SPRING (SHIFT LEVER)  
29. 4M-1828 [1] RETAINER-SPRING  
30. 4M-1827 [1] RETAINER-SPRING  
31. 4M-1831 [1] PLUG-LEVER HOUSING  
32. 105-9702 [1] HOUSING AS  
33. 9X-9510 [1] HOUSING AS  
34. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
35. 6N-3827 [1] DRIVE AS-MOTOR  
36. Z [1] HOUSING  
37. JZ [4] SPRING  
38. JZ [4] BRUSH  
39. JZ [4] SCREW  
40. JPZ [6] SCREW AS  
41. JPZ [2] SEAL-O-RING  
42. LZ [3] INSULATOR  
45. NPZ [1] NUT  
46. NPZ [1] SEAL-O-RING  
47. PZ [1] SEAL-O-RING  
48. Z [1] RETAINER  
49. PZ [1] GASKET  
50. PZ [1] BUSHING  
51. PZ [2] CAP  
52. PZ [1] PLUG-PIPE  
53. PZ [1] PLUG  
54. PZ [1] WICK  
55. PZ [1] PLUG  
56. PZ [1] BUSHING  
57. PZ [1] WASHER  
58. NZ [1] SEAL-O-RING  
59. NZ [1] SEAL-O-RING  
60. PZ [1] RETAINER  
61. PZ [1] SPACER  
62. PZ [1] BUSHING  
63. LZ [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  8C-3655 J [1] KIT-BRUSH (STARTING MOTOR)  
  7T-3267 P [1] KIT-BUSHING (STARTING MOTOR)  
  7T-3268 N [1] KIT-LEVER (STARTING MOTOR)  
  8T-9884 L [1] KIT-INSULATOR (STARTING MOTOR)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   KIT MARKED P SERVICES PART(S) MARKED P
  Z   NOT SERVICED SEPARATELY
 

#SEBP33530221
 

7N-0719: SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N BFE1-UP
PART OF 206-6030, 231-5283, 260-9483 PANEL GP-CIRCUIT BREAKER
i00156217 SEBP3353
7N0719 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 2H-3922 [2] LOCKWASHER  
4. 9F-5644 [2] LOCKWASHER  
5. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
 

#SEBP33530222
 

125-1302: SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC
S/N BFE1-UP
24-VOLT
PART OF 206-6030, 231-5283, 260-9483 PANEL GP-CIRCUIT BREAKER
i01763082 SEBP3353
1251302 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
4. 3B-4504 [2] LOCKWASHER  
5. 5C-2890 M [2] NUT (M6X1-THD)  
6. 9X-1813 E SLEEVE (16-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP33530223
 

223-7577: SWITCH GP-MAGNETIC

223-7577 SWITCH GP-MAGNETIC
S/N 5GG1-UP
24-VOLT
PART OF 194-1686 STARTING AID GP
i01834493 SEBP3353
2237577 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 398-0940 [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)  
1A. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
1B. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
1C. 3F-9556 [2] LOCKWASHER  
1D. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
1E. 6V-8378 [2] NUT (10-32-THD)  
1F. 8F-1434 [2] LOCKWASHER  
 

#SEBP33530224
 

106-0107: SWITCH GP-ROTARY

106-0107 SWITCH GP-ROTARY
S/N BFE1-UP
PART OF 186-4572 WIRING GP-CONSOLE
i02096966 SEBP3353
1060107 SWITCH GP-ROTARY Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 106-0210 [1] SEAL  
3. 8T-8737 [1] PLUG-SEAL  
4. 9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
5. 7Y-5458 M [1] NUT (M12X1-THD)  
6. 7Y-5464 [1] WASHER (12.2X15.4X0.5-MM THK)  
  M   METRIC PART
 

#SEBP33530225
 

9G-7641: SWITCH GP-START

9G-7641 SWITCH GP-START -ENGINE, KEY
S/N BFE1-UP
PART OF 186-4572 WIRING GP-CONSOLE
i00089811 SEBP3353
9G7641 SWITCH GP-START Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8362 [4] SCREW-MACHINE (8-32X0.31-IN)  
2. 9B-7233 [4] LOCKWASHER  
3. 7T-6799 [1] NUT-MOUNTING (1-32-THD)  
 

#SEBP33530226
 

239-1134: VALVE GP-ETHER STARTING

239-1134 VALVE GP-ETHER STARTING
S/N BFE1-UP
24-VOLT, CONTINUOUS
PART OF 255-3009, 307-6799 STARTING AID GP-ETHER
AN ATTACHMENT
i02052285 SEBP3353
2391134 VALVE GP-ETHER STARTING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9801 [1] GASKET  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 358-4889 [1] FILTER (ETHER START)  
 

#SEBP33530227
 

183-1015: WIRING GP-AUXILIARY CONTROL

183-1015 WIRING GP-AUXILIARY CONTROL -COMBINED SYSTEMS 4 & 14
S/N BFE1-UP
PART OF 179-5224 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01555330 SEBP3353
1831015 WIRING GP-AUXILIARY CONTROL Parts scheme 1831015 WIRING GP-AUXILIARY CONTROL Parts scheme 1831015 WIRING GP-AUXILIARY CONTROL Parts scheme 1831015 WIRING GP-AUXILIARY CONTROL Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [33] STRAP-CABLE  
2. 7I-2673 [8] STRAP-CABLE  
3. 7K-1181 [23] STRAP-CABLE  
4. 116-0118 [3] CLIP  
5. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 186-4637 [1] HARNESS AS-AUXILIARY  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [3] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 186-4711 [1] BRACKET AS  
8. 111-4836 [4] CLIP  
9. 111-4837 [1] CLIP  
10. 132-5789 [1] CLIP (LADDER)  
11. 197-4324 [1] BRACKET AS  
12. 4P-7428 [4] CLIP  
13. 7C-4354 [1] CLIP  
14. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
16. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
17. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
18. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
19. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
20. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP33530228
 

183-1017: WIRING GP-AUXILIARY CONTROL

183-1017 WIRING GP-AUXILIARY CONTROL
S/N BFE1-UP
ONE WAY/TWO PUMP FOOT SWITCH
PART OF 179-5161 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01552139 SEBP3353
1831017 WIRING GP-AUXILIARY CONTROL Parts scheme 1831017 WIRING GP-AUXILIARY CONTROL Parts scheme 1831017 WIRING GP-AUXILIARY CONTROL Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
2. 7K-1181 [17] STRAP-CABLE  
3. 3S-2093 [30] STRAP-CABLE  
4. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
5. 4P-7428 [2] CLIP  
6. 116-0118 [1] CLIP  
7. 183-1020 [1] HARNESS AS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9. 111-4837 [1] CLIP  
10. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP33530229
 

190-1020: WIRING GP-CAB

190-1020 WIRING GP-CAB
S/N BFE1-UP
PART OF 190-1040 CAB GP
Type 1
i01362334 SEBP3353
1901020 WIRING GP-CAB Parts scheme 1901020 WIRING GP-CAB Parts scheme 1901020 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10CM)  
4. 163-6795 [16] STRAP-CABLE  
5. 198-5959 [1] HARNESS AS-CAB (CAB)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
8. 163-6810 [1] HARNESS AS-MONITOR  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)  
14. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
15. 163-6719 [1] SWITCH AS-ROCKER (WINDOW WASHER)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [4] TERMINAL (MALE)  
16. 7K-1181 [2] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 167-3492 [1] ANTENNA AS  
  7Y-5285 M [1] SCREW AS (M4X0.7X8-MM)  
  106-0035 [1] ROD AS  
20. 197-0393 M [2] BOLT-SOCKET HEAD  
21. 163-6718 [1] SWITCH AS-ROCKER (WINDOW WIPER)  
  167-3543 [5] TERMINAL (MALE)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
22. 163-6722 [1] SWITCH AS-ROCKER (FINE SWING CONTROL)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
23. 195-8867 Y [1] MONITOR GP-OPERATOR  
24. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
25. 163-6814 [1] COVER (RH)  
26. 163-6813 [1] COVER (LH)  
27. 8T-4970 M [6] BOLT (M6X1X14-MM)  
28. 9X-8256 [12] WASHER (6.6X12X2-MM THK)  
29. 167-3441 [2] LAMP GP-FLOOD (24-VOLT)  
  9X-3463 [1] LAMP-HALOGEN (24-VOLT, 70-WATT)  
30. 8T-4190 M [2] BOLT (M16X2X25-MM)  
31. 167-3437 [1] BRACKET AS (LH)  
32. 167-3456 [2] HARNESS AS-LIGHTING (CAB FLOODLIGHT)  
33. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
34. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
36. 167-3438 [1] BRACKET AS (RH)  
37. 167-7083 [1] SENSOR AS (SUNLIGHT FOR AIR CONDITIONER)  
38. 8T-6411 M [6] SCREW-MACHINE (M6X1X12-MM)  
39. 168-4605 [2] PANEL GP-CONTROL (AIR CONDITIONER)  
40. 169-5509 [1] HARNESS AS-HEATER & AIR COND (TO KEYPAD, SUN SENSOR)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, INTERFACE SEAL & WEDGE
41. 5C-2890 M [2] NUT (M6X1-THD)  
42. 167-3527 [1] HARNESS AS-RADIO  
43. 3S-2093 [6] STRAP-CABLE  
44. 134-1346 [1] CONVERTER GP-ELECTRICAL (24-VOLT TO 12-VOLT)(24 VOLT TO 12 VOLT)  
45. 101-2846 E GUARD (18CM)  
46. M [8] SCREW-PAN HEAD (M4X0.7X16-MM)  
47. 6T-7695 [2] SPEAKER AS-RADIO  
48. 167-7023 [1] BRACKET  
49. 191-6905 [1] COVER  
50. 9X-2045 M [1] SCREW-TRUSS HEAD (M6X1X20-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Specifications
Electric Starting Motor
3126B Engine for Caterpillar Built Machines
Testing and Adjusting
Pinion Clearance - Adjust
3126B Engines
Electric Starting System - Test
3126B Engines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
3126B Engines for Caterpillar Built Machines
Service Magazine
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28

Caterpillar Parts SIS Catalog 325C :

STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1511 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
201-4204 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
128-5626 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
128-5626 STARTING MOTOR GP-ELECTRIC
186-1122 STARTING AR-COLD WEATHER
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
223-7577 SWITCH GP-MAGNETIC
SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
SWITCH GP-START
9G-7641 SWITCH GP-START
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
WIRING GP-AUXILIARY CONTROL
183-1015 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
183-1017 WIRING GP-AUXILIARY CONTROL

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.