185-8277 CAB GP S/N BFE1-UP EXTERIOR PART OF 190-1040 CAB GP 325C EXCAVATOR



OPERATOR STATION
CAB GP
AIR CONDITIONER GP
CONSOLE GP

EXCAVATOR 325C EXCAVATOR BFE
 325C L Excavator BFE00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3353 325C BFE   (2000)

OPERATOR STATION

CAB GP
CAB GP
176-1970 CAB GP
CAB GP
185-8277 CAB GP
CAB GP
189-8884 CAB GP
190-1040 CAB GP
HATCH GP-ROOF
139-7099 HATCH GP-ROOF
HATCH GP-ROOF
189-2849 HATCH GP-ROOF
7Y-0059 LITERATURE GP
VISOR GP-CAB
161-3751 VISOR GP-CAB
 

#SEBP33531010
 

185-8277: CAB GP

185-8277 CAB GP
S/N BFE1-UP
EXTERIOR
PART OF 190-1040 CAB GP
i01624834 SEBP3353
1858277 CAB GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 201-4530 [1] BRACKET AS  
5. 161-3685 [1] ROD  
6. 161-3690 [1] HANDLE AS  
  8T-4132 M [1] NUT (M16X2-THD)  
7. 161-3697 [1] GUARD  
8. 164-0523 [1] LEVER AS  
9. 164-0527 [1] ROD  
10. 164-0528 Y [1] LEVER GP-CAB DOOR  
11. 167-7042 [2] SEAL  
12. 171-7396 [1] COVER AS  
13. 171-7426 [1] CABLE AS  
14. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
15. 176-1942 [1] COVER  
16. 205-6295 [1] LATCH AS  
17. 176-1986 [1] LAMP AS-DOME  
18. 167-7272 [1] FILM-IDENTIFICATION (CATERPILLAR, CAB, REAR)  
19. 185-8196 [1] GROMMET  
20. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
21. 196-1675 [1] HANDLE AS  
22. 085-6452 [2] WASHER  
23. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
24. 105-2169 [3] BOLT AS  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 156-6617 [1] MIRROR  
28. 156-6618 [1] SUPPORT AS  
29. 189-3396 M [5] NUT (M10X1.5-THD)  
30. 1R-5998 [2] LOCKWASHER  
31. 3B-4510 [1] LOCKWASHER  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 095-0755 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
34. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
35. 4I-1205 [2] BUMPER  
36. 4I-1206 [2] GUIDE  
37. 4I-3063 [1] SPRING  
38. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
39. 4I-3144 [2] WASHER-HARD (10.2X22X3.2-MM THK)  
40. 4I-4270 [1] HOLDER-GLASS  
41. 4I-4392 [3] CLIP  
42. 5C-7793 [1] HOOK-COAT  
43. 6V-7636 [4] PIN AS-SPRING  
44. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
45. 8T-4193 M [1] BOLT (M16X2X50-MM)  
46. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
47. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
48. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
49. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
51. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
52. 6I-5470 E SEAL  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33531011
 

189-8884: CAB GP

189-8884 CAB GP
S/N BFE1-UP
PART OF 183-9681 OPERATOR AR
i01356109 SEBP3353
1898884 CAB GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
2. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
3. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
4. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
5. 190-1040 Y [1] CAB GP  
6. 171-7336 [1] COVER  
7. 199-5818 Y [1] COVER GP-STORAGE  
8. 124-7346 [2] LOCKWASHER  
9. 8Y-6967 [4] LOUVER AS-VENT  
10. 128-2136 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
11. 128-2135 M [2] SCREW-TRUSS HEAD (M6X1X13-MM)  
12. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33531012
 

190-1040: CAB GP

190-1040 CAB GP
S/N BFE1-UP
PART OF 189-8884 CAB GP
i01356265 SEBP3353
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
  [1] CAB GP  
  176-1970 Y [1] CAB GP (INTERIOR)  
  185-8277 Y [1] CAB GP (EXTERIOR)  
  189-2793 Y [1] DOOR & MTG GP-CAB (LH)  
  139-7099 Y [1] HATCH GP-ROOF  
  176-1965 Y [1] WINDOW GP-CAB  
  227-5343 Y [1] WINDOW GP-CAB (FRONT, LOWER)(LOWER)  
  139-7101 Y [1] WINDOW GP-CAB (FRONT, UPPER)  
  171-7408 Y [1] WIPER GP-WINDOW (UPPER)  
  190-1020 Y [1] WIRING GP-CAB  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33531013
 

177-6729: CASE GP-HEATER & EVAPORATOR

177-6729 CASE GP-HEATER & EVAPORATOR
S/N BFE1-UP
PART OF 168-4604 AIR CONDITIONER GP
Type 1
i01524175 SEBP3353
1776729 CASE GP-HEATER & EVAPORATOR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 133-8714 [1] GROMMET  
2. 2R-8159 [2] BOLT-SOCKET HEAD (10-32X1.5-IN)  
3. 037-4838 [1] CLAMP  
4. 177-6687 [1] COIL AS-HEATER  
5. 177-6688 [1] COIL AS-EVAPORATOR  
6. 177-6689 [1] PLATE  
7. 177-6690 [2] PLATE  
8. 177-6692 [1] PLATE  
9. 177-6693 [1] PLATE  
10. 177-6694 [1] PLATE  
11. 177-6695 [1] GROMMET  
12. 177-6696 [1] GROMMET  
13. 177-6698 [4] GASKET  
14. 177-6700 [2] TUBE-DRAIN  
15. 177-6701 [1] GASKET  
16. 177-6707 [1] HOUSING  
17. 177-6708 [1] COVER  
18. 177-6710 [1] RING  
19. 177-6723 [1] VALVE (EXPANSION)  
20. 177-6725 [1] TUBE  
21. 177-6726 [1] TUBE  
22. 177-6727 [1] ACTUATOR  
23. 177-6728 [1] MOTOR AS-BLOWER (AIR CONDITIONER, HEATER)  
  1M-1230 [4] NUT-LOCKING (10-32-THD)  
24. 177-6732 [1] DOOR AS  
25. 177-6733 [1] DOOR AS  
26. 179-4673 [1] GASKET  
27. 179-4674 [1] GASKET  
28. 179-4682 [2] LEVER  
29. 179-4683 [1] ROD  
30. 179-6136 [1] GASKET  
31. 187-7719 M [30] SCREW-HEX FLANGE (M5X2.24X14-MM)  
32. 189-2456 [5] CLIP  
33. 191-0979 [1] WHEEL-BLOWER  
34. 193-0702 [1] GASKET  
35. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
36. 133-9014 [1] SENSOR-TEMPERATURE (EVAPORATOR)  
37. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
38. 9X-7380 [1] SEAL-O-RING  
39. 9X-7381 [2] SEAL-O-RING  
40. 9X-7382 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP33531014
 

177-6729: CASE GP-HEATER & EVAPORATOR

177-6729 CASE GP-HEATER & EVAPORATOR
S/N BFE1-UP
PART OF 168-4604 AIR CONDITIONER GP
Type 2
i01969591 SEBP3353
1776729 CASE GP-HEATER & EVAPORATOR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 133-8714 [1] GROMMET  
2. 2R-8159 [2] BOLT-SOCKET HEAD (10-32X1.5-IN)  
3. 037-4838 [1] CLAMP  
5. 177-6687 [1] COIL AS-HEATER  
6. 177-6689 [1] PLATE  
7. 177-6690 [2] PLATE  
8. 177-6692 [1] PLATE  
9. 177-6694 [1] PLATE  
10. 177-6696 C [2] GROMMET  
11. 177-6698 [4] GASKET  
12. 177-6700 [2] TUBE-DRAIN  
13. 177-6701 [1] GASKET  
14. 177-6707 [1] HOUSING  
15. 177-6708 [1] COVER  
16. 177-6710 [1] RING  
17. 177-6725 [1] TUBE  
18. 177-6726 [1] TUBE  
19. 177-6727 [1] ACTUATOR  
20. 177-6732 [1] DOOR AS  
21. 177-6733 [1] DOOR AS  
22. 179-4673 [1] GASKET  
23. 179-4674 [1] GASKET  
24. 179-4682 [2] LEVER  
25. 179-4683 [1] ROD  
26. 179-6136 [1] GASKET  
27. 187-7719 M [30] SCREW-HEX FLANGE (M5X2.24X14-MM)  
28. 189-2456 [5] CLIP  
29. 191-0979 [1] WHEEL-BLOWER  
30. 193-0702 [1] GASKET  
31. 228-9043 C [1] COIL AS-EVAPORATOR  
32. 228-9044 C [1] VALVE (EXPANSION)  
33. 288-1556 [1] MOTOR AS-FAN  
34. 228-9539 [1] PLATE  
35. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
36. 5C-2890 CM [1] NUT (M6X1-THD)  
37. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
38. 9X-7380 [1] SEAL-O-RING  
39. 9X-7381 [1] SEAL-O-RING  
40. 9X-7382 C [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP33531015
 

212-8518: COMPRESSOR GP-REFRIGERANT

212-8518 COMPRESSOR GP-REFRIGERANT
S/N BFE1-UP
PART OF 201-1212 ENGINE AR
i01684611 SEBP3353
2128518 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 8T-3647 M [2] BOLT (M8X1.25X80-MM)  
3. 258-9892 M [2] BOLT (M8X1.25X80-MM)  
4. 305-0324 [1] COMPRESSOR GP-REFRIGERANT  
5. 132-5789 [1] CLIP (LADDER)  
  M   METRIC PART
 

#SEBP33531016
 

178-5598: CONDENSER & MTG GP-REFRIGERANT

178-5598 CONDENSER & MTG GP-REFRIGERANT
S/N BFE1-UP
PART OF 201-3792 INSTALLATION AR-ENGINE
i01558428 SEBP3353
1785598 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 164-0588 [1] CONDENSER AS  
2. 185-8268 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
3. 185-8270 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
6. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
7. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP33531017
 

161-3758: CONSOLE GP-OPERATOR

161-3758 CONSOLE GP-OPERATOR
S/N BFE1-UP
PART OF 183-9681 OPERATOR AR
i01354069 SEBP3353
1613758 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 161-3760 Y [1] CONSOLE GP-OPERATOR (RH)  
2. 161-3759 Y [1] CONSOLE GP-OPERATOR (LH)  
3. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 178-5523 [2] COVER  
6. 176-1914 [2] SUPPORT  
7. 176-1913 [2] GUARD  
8. 176-1915 [2] SUPPORT  
9. 9X-2043 M [16] SCREW-TRUSS HEAD (M6X1X14-MM)  
10. 176-1916 [2] GROMMET  
11. 178-5423 [2] GROMMET  
12. 178-5422 [2] GROMMET  
13. 185-8161 [2] INSULATOR  
14. 7K-1181 [6] STRAP-CABLE  
15. 178-5408 [1] CUSHION AS-ARM  
16. 178-5426 [3] SCREW-TAPPING  
17. 178-5628 [1] STRIKER  
18. 185-8287 M [2] SCREW-PAN HEAD (M4X0.7X12-MM)  
19. 178-5627 [1] HINGE  
20. 185-8162 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
21. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 227-6807 [2] GUARD  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33531018
 

161-3759: CONSOLE GP-OPERATOR

161-3759 CONSOLE GP-OPERATOR -LH
S/N BFE1-UP
PART OF 161-3758 CONSOLE GP-OPERATOR
i01354091 SEBP3353
1613759 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7Y-9096 M [4] SCREW-TRUSS HEAD (M6X1X6-MM)  
2. 128-2135 M [5] SCREW-TRUSS HEAD (M6X1X13-MM)  
3. 178-5401 [1] SUPPORT AS  
4. 178-5408 [1] CUSHION AS-ARM  
5. 178-5426 [9] SCREW-TAPPING  
6. 178-5519 [1] COVER  
7. 178-5520 [1] COVER  
8. 178-5521 [1] COVER  
9. 178-5522 [1] COVER  
10. 178-5524 Y [1] ADJUSTMENT GP-CONSOLE  
11. 178-5530 [1] ASHTRAY  
12. 178-5531 [1] CASE  
13. 284-4566 [1] CASE  
14. 178-5627 [1] HINGE  
15. 178-5628 [1] STRIKER  
16. 178-5629 [1] LATCH  
17. 185-8162 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
18. 185-8287 M [2] SCREW-PAN HEAD (M4X0.7X12-MM)  
19. 2Y-5687 [4] WASHER (8.5X16X1.2-MM THK)  
20. 119-5026 [8] SCREW-PAN HEAD (10-16X0.63-IN)  
21. 155-7099 [8] NUT  
22. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33531019
 

161-3760: CONSOLE GP-OPERATOR

161-3760 CONSOLE GP-OPERATOR
S/N BFE1-UP
PART OF 161-3758 CONSOLE GP-OPERATOR
i01354127 SEBP3353
1613760 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7Y-9096 M [6] SCREW-TRUSS HEAD (M6X1X6-MM)  
2. 128-2135 M [4] SCREW-TRUSS HEAD (M6X1X13-MM)  
3. 178-5400 [1] SUPPORT AS  
4. 178-5426 [8] SCREW-TAPPING  
5. 178-5519 [1] COVER  
6. 178-5522 [1] COVER  
7. 178-5524 Y [1] ADJUSTMENT GP-CONSOLE  
8. 178-5529 [1] COVER  
9. 178-5533 [1] CASE  
10. 178-5548 [1] COVER  
11. 178-5629 [1] LATCH  
12. 178-5632 [1] BRACKET  
13. 185-8163 M [3] SCREW-MACHINE (M5X0.8X8-MM)  
14. 196-1565 [1] BRACKET  
15. 2Y-5687 [6] WASHER (8.5X16X1.2-MM THK)  
16. 119-5026 [5] SCREW-PAN HEAD (10-16X0.63-IN)  
17. 155-7099 [10] NUT  
18. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Improving the Environment of the Operator{7301}
Improving the Environment of the Operator{7301}
Service Magazine
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02

Caterpillar Parts SIS Catalog 325C :

CAB GP
176-1970 CAB GP
BOX GP-STORAGE
142-3840 BOX GP-STORAGE
AIR CONDITIONER GP
190-7375 AIR CONDITIONER GP
AIR CONDITIONER GP
185-4068 AIR CONDITIONER GP
183-9683 AIR CONDITIONER GP
AIR CONDITIONER GP
168-4604 AIR CONDITIONER GP
AIR CONDITIONER GP
168-4604 AIR CONDITIONER GP
ADJUSTMENT GP-CONSOLE
178-5524 ADJUSTMENT GP-CONSOLE
CAB GP
189-8884 CAB GP
190-1040 CAB GP
CASE GP-HEATER & EVAPORATOR
177-6729 CASE GP-HEATER & EVAPORATOR
CASE GP-HEATER & EVAPORATOR
177-6729 CASE GP-HEATER & EVAPORATOR
COMPRESSOR GP-REFRIGERANT
212-8518 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
178-5598 CONDENSER & MTG GP-REFRIGERANT
CONSOLE GP-OPERATOR
161-3758 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
161-3759 CONSOLE GP-OPERATOR

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.