AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

174-5990 CONTROL GP-HYDRAULIC HAND S/N CFC1-UP; CFF1-UP PART OF 174-5988 HYDRAULIC AR D3G TRACK-TYPE TRACTOR


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP
DOOR GP
PROTECTION GP-VANDALISM
HEATER GP

TRACK-TYPE TRACTOR D3G TRACK-TYPE TRACTOR CFC
 D3G XL & LGP TRACK TYPE TRACTORS CFC00001-UP (MACHINE) POWERED BY 3046 Engine SEBP3361 D3G CFC   (2001)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
174-5990 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
178-8032 CONTROL GP-HYDRAULIC HAND
 

#SEBP33610290
 

174-5990: CONTROL GP-HYDRAULIC HAND

174-5990 CONTROL GP-HYDRAULIC HAND
S/N CFC1-UP; CFF1-UP
PART OF 174-5988 HYDRAULIC AR
i01576925 SEBP3361
1745990 CONTROL GP-HYDRAULIC HAND Parts scheme 1745990 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1473 [1] HANDLE  
2. 3W-1482 [1] SHAFT AS  
3. 3W-1491 [1] SUPPORT  
4. 7S-5757 [1] RING-RETAINING  
5. 7X-3374 [1] NUT-FULL (1/2-20-THD)  
6. 7X-7662 [4] ROD END  
7. 7X-7915 [6] ROD END  
8. 8T-0741 [10] SEAL-LIP TYPE  
9. 8T-0798 [10] BEARING-ROLLER  
10. 8Y-2986 [1] LEVER AS  
11. 8Y-5150 [1] LEVER  
12. 8Y-5156 [1] LEVER  
13. 111-9890 [1] LEVER  
14. [1] ROD  
15. 235-6355 [1] PLATE  
16. 178-8458 [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
17. 178-8459 [1] SHAFT AS  
18. 179-6047 [1] YOKE  
19. 179-6048 [1] ROD  
20. 179-6796 [2] ROD  
21. 179-6844 [1] ROD  
22. 179-9393 [1] SHAFT AS  
23. 179-9394 [1] SHAFT AS  
24. 184-7673 [1] COVER AS  
  172-8591 M [8] NUT-CLIP (M6X1-THD)  
25. 235-6353 [1] BOOT  
26. 1B-8704 [1] KEY-WOODRUFF  
27. 5C-7261 M [10] NUT (M8X1.25-THD)  
28. 5C-9553 M [8] BOLT (M6X1X16-MM)  
29. 6V-9189 M [10] LOCKNUT (M8X1.25-THD)  
30. 7X-7729 [4] WASHER (11X25X3-MM THK)  
31. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
33. 8T-4133 M [2] NUT (M10X1.5-THD)  
34. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
35. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
36. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 8T-4908 M [6] BOLT (M8X1.25X25-MM)  
40. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
41. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
42. 201-2115 [1] HOLDER-CUP  
  M   METRIC PART
 

#SEBP33610291
 

178-8032: CONTROL GP-HYDRAULIC HAND

178-8032 CONTROL GP-HYDRAULIC HAND
S/N CFC1-UP; CFF1-UP
PART OF 174-5983, 194-1083 HYDRAULIC AR
AN ATTACHMENT
i01549180 SEBP3361
1788032 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5G-0432 [1] BOOT  
2. 7X-7915 [2] ROD END  
3. 8T-4229 [1] KNOB (BALL)  
4. 180-0182 [1] ROD  
5. 180-0471 [1] ROD  
6. 183-5320 [1] FILM (RIPPER RAISE, LOWER)  
7. 201-2120 [1] LEVER AS  
8. 201-2121 [1] SHAFT  
9. 096-4885 M [1] LOCKNUT (M16X2-THD)  
10. 170-4735 [1] RING-RETAINING  
11. 1H-3135 [2] BUSHING-TERMINAL  
12. 5C-7261 M [2] NUT (M8X1.25-THD)  
13. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
14. 7X-0510 [1] WASHER-HARD (15.5X29X3-MM THK)  
15. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4244 M [2] NUT (M12X1.75-THD)  
17. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
18. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#SEBP33610292
 

183-3282: CONTROL GP-JOYSTICK

183-3282 CONTROL GP-JOYSTICK
S/N CFC1-UP; CFF1-UP
PART OF 174-5968 CONTROL GP-STEERING & XMSN
i01594298 SEBP3361
1833282 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-8683 [1] PIN-SPRING  
2. 177-2278 [1] BOOT  
3. 208-6100 [1] CONTROL GP-HANDLE  
4. 185-1107 [1] BASE AS (JOYSTICK CONTROL)  
  6V-9673 M [4] SCREW-MACHINE (M5X0.8X12-MM)  
  8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
  208-3689 [2] BLOCK-WEAR  
5. 191-8300 [1] DETENT GP-CONTROL (JOYSTICK, EJECTOR)  
  033-9139 [1] RING-RETAINING  
  107-1964 [4] SCREW-PAN HEAD (6-19X0.5-IN)  
  193-4476 M [4] SCREW-PAN HEAD (M4X0.7X35-MM)  
  151-4977 [4] WASHER (4.445X9.525X1.092-MM THK)  
6. 191-8301 [1] DETENT GP-CONTROL (JOYSTICK, BOWL)  
  107-1964 [4] SCREW-PAN HEAD (6-19X0.5-IN)  
  193-4476 M [4] SCREW-PAN HEAD (M4X0.7X35-MM)  
  151-4977 [4] WASHER (4.445X9.525X1.092-MM THK)  
7. 257-2531 [1] SENSOR GP-POSITION (MAX DUTY CYCLE)  
8. 257-2528 [1] SENSOR GP-POSITION (MIN DUTY CYCLE)  
9. 175-3265 [1] SCREW (8-16X0.63-IN)  
10. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
11. 8T-7500 M [8] SCREW-MACHINE (M4X0.7X35-MM)  
12. 209-3563 [1] CLIP  
13. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 8T-8729 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
15. 8T-8737 [1] PLUG-SEAL  
17. 3B-4501 [8] LOCKWASHER  
18. 151-4977 [4] WASHER (4.445X9.525X1.092-MM THK)  
  M   METRIC PART
 

#SEBP33610293
 

179-6471: DOOR GP-CAB

179-6471 DOOR GP-CAB -RH
S/N CFC1-UP; CFF1-UP
PART OF 175-6680 ROPS GP
AN ATTACHMENT
i01575938 SEBP3361
1796471 DOOR GP-CAB Parts scheme 1796471 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6647 E SEAL (405-CM)  
2. 7K-1181 [5] STRAP-CABLE  
3. 108-3188 [2] GROMMET  
4. 109-1390 M [4] BOLT (M6X1X25-MM)  
5. 125-8175 [1] BLADE AS-WIPER (450-MM)(DOOR, RH)  
6. 138-8454 M [4] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
7. 155-2263 [1] WEDGE-PLUG LOCK (6-PIN)  
8. 172-2383 [1] LINK AS  
8A. 6V-8185 [1] NUT (1/4-20-THD)  
8B. 108-5471 [1] CLEVIS  
9. 177-5279 [1] HARNESS AS-CAB (DOOR, RH)  
  144-1636 [5] PIN-CONNECTOR (14-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(12-CM)  
10. 179-4811 Y [1] MOTOR GP-WINDOW WIPER (DOOR, RH)  
11. 180-3129 [1] STRIKER  
12. 180-3136 [1] ARM AS-WIPER  
12A. 305-9191 [1] NOZZLE AS-WASHER  
13. 180-3145 [1] LATCH AS-ROTARY  
14. 190-1188 [1] PLATE  
15. 200-7836 [1] HANDLE AS (PULL)  
16. 213-4761 [1] DOOR AS (RH)  
17. 213-4767 [1] COVER  
18. 213-4769 [1] WINDOW  
19. 213-4771 [1] LINKAGE AS  
20. 155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
21. 178-2593 [2] BUMPER  
22. 5C-7261 M [6] NUT (M8X1.25-THD)  
23. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 6V-7636 [2] PIN AS-SPRING  
25. 7X-7729 [7] WASHER (11X25X3-MM THK)  
26. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
27. 8T-4138 M [5] BOLT (M6X1X20-MM)  
28. 8T-4171 M [2] BOLT (M6X1X12-MM)  
29. 9X-2038 [2] WASHER (7X19X2-MM THK)  
30. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
31. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610294
 

179-6472: DOOR GP-CAB

179-6472 DOOR GP-CAB -LH
S/N CFC1-UP; CFF1-UP
PART OF 175-6680 ROPS GP
AN ATTACHMENT
i01575917 SEBP3361
1796472 DOOR GP-CAB Parts scheme 1796472 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6647 E SEAL (405-CM)  
2. 7K-1181 [4] STRAP-CABLE  
3. 108-3188 [2] GROMMET  
4. 109-1390 M [4] BOLT (M6X1X25-MM)  
5. 125-8175 [1] BLADE AS-WIPER (450-MM)(DOOR, LH)  
6. 138-8454 M [4] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
7. 155-2263 [1] WEDGE-PLUG LOCK (6-PIN)  
8. 172-2383 [1] LINK AS  
8A. 6V-8185 [1] NUT (1/4-20-THD)  
8B. 108-5471 [1] CLEVIS  
9. 177-5280 [1] HARNESS AS-WINDOW WIPER (LH)  
  144-1636 [5] PIN-CONNECTOR (14-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
10. 179-4810 Y [1] MOTOR GP-WINDOW WIPER (DOOR, LH)  
11. 180-3129 [1] STRIKER  
12. 180-3137 [1] ARM AS-WIPER  
12A. 305-9190 [1] NOZZLE AS-WASHER  
13. 180-3146 [1] LATCH AS (ROTARY)  
14. 190-1188 [1] PLATE  
15. 200-7836 [1] HANDLE AS (PULL)  
16. 213-4762 [1] DOOR AS (LH)  
17. 213-4768 [1] COVER  
18. 213-4770 [1] WINDOW  
19. 213-4772 [1] LINKAGE AS  
20. 155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
21. 178-2593 [2] BUMPER  
22. 5C-7261 M [6] NUT (M8X1.25-THD)  
23. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 6V-7636 [2] PIN AS-SPRING  
25. 7X-7729 [7] WASHER (11X25X3-MM THK)  
26. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
27. 8T-4138 M [5] BOLT (M6X1X20-MM)  
28. 8T-4171 M [2] BOLT (M6X1X12-MM)  
29. 9X-2038 [2] WASHER (7X19X2-MM THK)  
30. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
31. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610295
 

190-1198: DOOR GP-CAB

190-1198 DOOR GP-CAB -BRUSH GUARD, LH
S/N CFC1-UP; CFF1-UP
PART OF 203-4400 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i01576536 SEBP3361
1901198 DOOR GP-CAB Parts scheme 1901198 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6647 E SEAL (405-CM)  
2. 7K-1181 [5] STRAP-CABLE  
3. 108-3188 [2] GROMMET  
4. 109-1390 M [4] BOLT (M6X1X25-MM)  
5. 125-8175 [1] BLADE AS-WIPER (450-MM)(DOOR, LH)  
6. 138-8454 M [4] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
7. 155-2263 [1] WEDGE-PLUG LOCK (6-PIN)  
8. 172-2383 [1] LINK AS  
8A. 6V-8185 [1] NUT (1/4-20-THD)  
8B. 108-5471 [1] CLEVIS  
9. 177-5280 [1] HARNESS AS-WINDOW WIPER (LH)  
  144-1636 [5] PIN-CONNECTOR (14-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
10. 179-4810 Y [1] MOTOR GP-WINDOW WIPER (DOOR, LH)  
11. 180-3129 [1] STRIKER  
12. 180-3137 [1] ARM AS-WIPER  
12A. 305-9190 [1] NOZZLE AS-WASHER  
13. 180-3146 [1] LATCH AS (ROTARY)  
14. 190-1188 [1] PLATE  
15. 200-7836 [1] HANDLE AS (PULL)  
16. 213-4762 [1] DOOR AS (LH)  
17. 213-4768 [1] COVER  
18. 213-4772 [1] LINKAGE AS  
19. 213-8634 [1] WINDOW (PLASTIC, LH)  
20. 155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS WEDGE & INTERFACE SEAL)
21. 178-2593 [2] BUMPER  
22. 5C-7261 M [6] NUT (M8X1.25-THD)  
23. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 6V-7636 [2] PIN AS-SPRING  
25. 7X-7729 [7] WASHER (11X25X3-MM THK)  
26. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
27. 8T-4138 M [5] BOLT (M6X1X20-MM)  
28. 8T-4171 M [2] BOLT (M6X1X12-MM)  
29. 9X-2038 [2] WASHER (7X19X2-MM THK)  
30. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
31. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610296
 

190-1199: DOOR GP-CAB

190-1199 DOOR GP-CAB -BRUSH GUARD, RH
S/N CFC1-UP; CFF1-UP
PART OF 203-4400 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i01576591 SEBP3361
1901199 DOOR GP-CAB Parts scheme 1901199 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6647 E SEAL (405-CM)  
2. 7K-1181 [6] STRAP-CABLE  
3. 108-3188 [2] GROMMET  
4. 109-1390 M [4] BOLT (M6X1X25-MM)  
5. 125-8175 [1] BLADE AS-WIPER (450-MM)(DOOR, LH)  
6. 138-8454 M [4] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
7. 155-2263 [1] WEDGE-PLUG LOCK (6-PIN)  
8. 172-2383 [1] LINK AS  
8A. 6V-8185 [1] NUT (1/4-20-THD)  
8B. 108-5471 [1] CLEVIS  
9. 177-5279 [1] HARNESS AS-CAB (DOOR, RH)  
  144-1636 [5] PIN-CONNECTOR (14-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(12-CM)  
10. 179-4811 Y [1] MOTOR GP-WINDOW WIPER (DOOR, RH)  
11. 180-3129 [1] STRIKER  
12. 180-3136 [1] ARM AS-WIPER  
12A. 305-9190 [1] NOZZLE AS-WASHER  
13. 180-3145 [1] LATCH AS-ROTARY  
14. 190-1188 [1] PLATE  
15. 200-7836 [1] HANDLE AS (PULL)  
16. 213-4761 [1] DOOR AS (RH)  
17. 213-4767 [1] COVER  
18. 213-4771 [1] LINKAGE AS  
19. 213-8633 [1] WINDOW (PLASTIC, RH)  
20. 155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
21. 178-2593 [2] BUMPER  
22. 5C-7261 M [6] NUT (M8X1.25-THD)  
23. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 6V-7636 [2] PIN AS-SPRING  
25. 7X-7729 [7] WASHER (11X25X3-MM THK)  
26. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
27. 8T-4138 M [5] BOLT (M6X1X20-MM)  
28. 8T-4171 M [2] BOLT (M6X1X12-MM)  
29. 9X-2038 [2] WASHER (7X19X2-MM THK)  
30. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
31. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610297
 

174-5875: GUARD GP-VANDALISM

174-5875 GUARD GP-VANDALISM
S/N CFC1-UP; CFF1-UP
PART OF 174-5849, 174-5851 CHASSIS AR
i01569090 SEBP3361
1745875 GUARD GP-VANDALISM Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6602 E SEAL (13-CM)  
2. 8C-7332 E TRIM-EDGE (12-CM EACH)  
3. 8Y-5726 [1] SOCKET-LATCH  
4. 9R-8538 [1] PLUNGER (LATCH)  
5. 126-8509 [1] LOCK AS-CYLINDER  
6. 178-0632 [1] GUARD AS  
7. 6V-7357 M [1] BOLT (M6X1X25-MM)  
8. 7X-2619 M [1] BOLT (M6X1X10-MM)  
9. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
10. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
11. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP33610298
 

176-8303: HEATER GP-CAB

176-8303 HEATER GP-CAB
S/N CFC1-UP; CFF1-UP
FOR USE WITH ROLLOVER GP-PROTECTION
AN ATTACHMENT
i01549495 SEBP3361
1768303 HEATER GP-CAB Parts scheme 1768303 HEATER GP-CAB Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5672 D SEAL (0.7-M)  
2. 5P-5673 D SEAL (0.8-M)  
2A. 5P-5673 D SEAL (0.8-M)  
3. 8T-5372 D SEAL (1.1-M)  
4. 7K-1181 [3] STRAP-CABLE  
5. 8Y-6967 [1] LOUVER AS-VENT  
6. 103-6281 Y [1] ALTERNATOR GP-CHARGING  
7. 105-9980 [2] CLIP  
8. 146-6371 [4] LOUVER AS  
9. 177-5284 Y [1] CONTROL GP-AIR & TEMPERATURE (OPEN ROPS)  
10. 185-1557 Y [1] HEATER GP-CAB (OPEN ROPS)  
11. 186-0872 Y [1] LINES GP-HEATER  
12. 196-6863 Y [1] WIRING GP-HEATER  
13. 215-5694 [1] TRIM-DASH  
14. 200-2422 [1] FILTER ELEMENT AS-CAB AIR (CAB)  
15. 200-8668 [1] FILM (DASH, LOWER)  
16. 211-1094 [1] PLATE  
17. 4P-8134 [1] CLIP (LADDER)  
18. 5C-9553 M [2] BOLT (M6X1X16-MM)  
19. 8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
20. 8T-3998 M [2] BOLT (M4X0.7X12-MM)  
21. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4133 M [8] NUT (M10X1.5-THD)  
23. 9X-2026 [2] WASHER (6.5X17X1-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610299
 

185-1557: HEATER GP-CAB

185-1557 HEATER GP-CAB
S/N CFC1-UP; CFF1-UP
OPEN ROPS
PART OF 176-8303 HEATER GP-CAB
AN ATTACHMENT
i01694867 SEBP3361
1851557 HEATER GP-CAB Parts scheme 1851557 HEATER GP-CAB Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-6708 [2] WASHER (7X28.6X4.1-MM THK)  
2. 111-4013 [1] GROMMET  
3. 115-1615 [1] RELAY AS (12-VOLT)(BLOWER)  
4. 139-3900 [1] RESISTOR  
5. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(BLOWER)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
6. 304-8965 [1] BLOWER GP-CAB  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7T-0093 [2] PIN-CONNECTOR (12-GA TO 14-GA)  
7. 178-9589 [1] DIFFUSER AS  
8. [1] COVER AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
9. 180-2455 [1] BRACKET  
10. 185-4305 [1] HARNESS AS-HEATER  
  6T-6505 [2] HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  3E-5519 [1] PLUG AS-CONNECTOR (5-PIN)  
  177-9648 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7T-0094 [2] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
11. 185-6683 [1] COIL AS-HEATER  
12. 188-2712 [1] VALVE-DRAIN (AIR CONDITIONER)  
13. 194-5622 [1] VALVE AS-WATER (WATER)(AIR CONDITIONER)  
  6V-6717 [1] SCREW-WASHER HEAD (8-32X9.52-MM)  
  124-0312 [2] SCREW-PAN HEAD (8-16X0.32-IN)  
14. [1] BRACKET  
15. [1] BRACKET  
16. [1] COVER  
17. 212-1457 [1] GASKET  
18. 212-1459 [1] GASKET  
19. [1] BRACKET  
20. 213-0030 [1] CASE AS  
21. 129-3178 M [2] LOCKNUT (M6X1-THD)  
22. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
23. 4B-1219 [4] SCREW-MACHINE (6-32X0.375-IN)  
24. 5P-8394 [2] SCREW-MACHINE (8-32X0.75-IN)  
25. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
26. 6V-3320 [1] SCREW-MACHINE (1/4-20X7.5-IN)  
27. 6V-6717 [2] SCREW-WASHER HEAD (8-32X9.52-MM)  
28. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
29. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
30. 8T-4138 M [6] BOLT (M6X1X20-MM)  
31. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
32. 5P-5930 D SEAL (0.26-M)  
33. 5P-5673 D SEAL (0.28-M)  
34. 3L-8187 [4] LOCKWASHER  
35. 5P-4116 [15] WASHER-HARD (8.8X20.5X2-MM THK)  
36. 6V-8368 [4] NUT (6-32-THD)  
37. 8T-4189 M [15] BOLT (M8X1.25X20-MM)  
38. 8T-9082 [12] RIVET-POP  
39. 9X-2488 [2] CLAMP-HOSE  
40. 136-1953 E HOSE (14.2-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D3G :

CONTROL GP-GOVERNOR & BRAKE
174-5863 CONTROL GP-GOVERNOR & BRAKE
CONTROL GP-AIR & TEMPERATURE
179-6480 CONTROL GP-AIR & TEMPERATURE
CONTROL GP-AIR & TEMPERATURE
177-5284 CONTROL GP-AIR & TEMPERATURE
CONDENSER GP-REFRIGERANT
180-5927 CONDENSER GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
183-4739 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1908 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
187-7692 COMPRESSOR & MTG GP-REFRIG
CAB AR-ENCLOSED ROPS
203-4400 CAB AR-ENCLOSED ROPS
CONTROL GP-HYDRAULIC HAND
178-8032 CONTROL GP-HYDRAULIC HAND
CONTROL GP-JOYSTICK
183-3282 CONTROL GP-JOYSTICK
DOOR GP-CAB
179-6471 DOOR GP-CAB
DOOR GP-CAB
179-6472 DOOR GP-CAB
DOOR GP-CAB
190-1198 DOOR GP-CAB
DOOR GP-CAB
190-1199 DOOR GP-CAB
GUARD GP-VANDALISM
174-5875 GUARD GP-VANDALISM
HEATER GP-CAB
176-8303 HEATER GP-CAB

Truck sale:

Caterpillar D3G
 
Caterpillar D3G
- Crawler dozers
ZIEGLER CAT
 
41,903 
Caterpillar D3GX, Crawler dozers, Construction


Caterpillar D3GX, Crawler dozers, Construction
37,900 
Caterpillar D3GX, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D3GL, Rupsdozers, Bouw
39.512 
Caterpillar D3GL, Rupsdozers, Bouw

MICHIGAN CAT
Caterpillar 2.75 YD3 GP BUCKET, bucket, Construction
4,069 
Caterpillar 2.75 YD3 GP BUCKET, bucket, Construction
- bucket
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.