AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

185-3581 BLADE AR-PWR ANGLE & TILT -(XL) S/N CFC1-UP; CFF1-UP AN ATTACHMENT D3G TRACK-TYPE TRACTOR


WORK TOOLS
BLADE GP
WINCH GP
HYDRAULIC SYSTEM
CONTROL GP-WINCH HYDRAULIC

TRACK-TYPE TRACTOR D3G TRACK-TYPE TRACTOR CFC
 D3G XL & LGP TRACK TYPE TRACTORS CFC00001-UP (MACHINE) POWERED BY 3046 Engine SEBP3361 D3G CFC   (2001)

WORK TOOLS

BLADE GP
185-3581 BLADE AR-PWR ANGLE & TILT
BLADE GP-ANGLING
183-2405 BLADE GP-ANGLING
BLADE GP-ANGLING
183-9066 BLADE GP-ANGLING
BLADE GP-ANGLING
184-5413 BLADE GP-ANGLING
 

#SEBP33610360
 

185-3581: BLADE AR-PWR ANGLE & TILT

185-3581 BLADE AR-PWR ANGLE & TILT -(XL)
S/N CFC1-UP; CFF1-UP
AN ATTACHMENT
i01574914 SEBP3361
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  183-9066 Y [1] BLADE GP-ANGLING (XL)  
  150-5131 Y [1] LINK GP-PITCH  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610361
 

183-2405: BLADE GP-ANGLING

183-2405 BLADE GP-ANGLING
S/N CFC1-UP; CFF1-UP
LOW GROUND PRESSURE
PART OF 185-3580 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01574364 SEBP3361
1832405 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 6Y-5838 Y [1] EDGE GP-BIT & CUTTING  
3. 8J-0729 [3] RETAINER  
4. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
5. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
6. 179-5755 [1] CAP-BEARING  
7. 183-2406 [1] BLADE AS-ANGLING  
7A. 139-5215 [1] PIN  
7B. 179-5755 [1] CAP-BEARING  
8. 183-5297 B [22] SHIM (0.8-MM THK)  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610362
 

183-9066: BLADE GP-ANGLING

183-9066 BLADE GP-ANGLING -XL
S/N CFC1-UP; CFF1-UP
PART OF 185-3581 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i01575378 SEBP3361
1839066 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 6Y-5837 Y [1] EDGE GP-BIT & CUTTING  
3. 8J-0729 [3] RETAINER  
4. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
5. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
6. 179-5755 [1] CAP-BEARING  
7. 183-5297 B [22] SHIM (0.8-MM THK)  
8. 183-9067 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610363
 

184-5413: BLADE GP-ANGLING

184-5413 BLADE GP-ANGLING
S/N CFC1-UP; CFF1-UP
115 INCH BLADE
PART OF 185-3583 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01549100 SEBP3361
1845413 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 179-2897 Y [1] EDGE GP-BIT & CUTTING  
3. 8J-0729 [3] RETAINER  
4. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
5. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
6. 179-5755 [1] CAP-BEARING  
7. 183-5297 B [22] SHIM (0.8-MM THK)  
8. 188-4368 [1] BLADE AS-ANGLING  
8A. 179-5755 [1] CAP-BEARING  
8B. 139-5215 [1] PIN  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610364
 

208-5548: BRAKE & PLANETARY GP-WINCH

208-5548 BRAKE & PLANETARY GP-WINCH
S/N CSK1-UP
PART OF 179-9513 WINCH AR
AN ATTACHMENT
i01606843 SEBP3361
2085548 BRAKE & PLANETARY GP-WINCH Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-1586 [2] SEAL  
2. 211-8166 Y [1] BRAKE & PLANETARY GP-WINCH  
3. 3K-0360 [1] SEAL-O-RING  
4. 7X-0288 [7] BOLT (3/8-16X1.625-IN)  
5. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9S-8005 [1] PLUG (3/4-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610365
 

211-8166: BRAKE & PLANETARY GP-WINCH

211-8166 BRAKE & PLANETARY GP-WINCH
S/N CSK1-UP
PART OF 208-5548 BRAKE & PLANETARY GP-WINCH
AN ATTACHMENT
i01606848 SEBP3361
2118166 BRAKE & PLANETARY GP-WINCH Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3312 [1] RING-RETAINING  
2. 203-6631 [1] SHAFT  
3. 211-8168 Y [1] BRAKE GP-WINCH  
4. 211-8169 Y [1] PLANETARY GP-WINCH  
5. 211-8171 Y [1] GEAR GP-WINCH TRANSFER  
6. 211-8753 [1] COUPLING-MOTOR  
7. 211-8754 [1] RING-THRUST  
8. 4L-6454 [2] BOLT (3/8-16X1-IN)  
9. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33610366
 

211-8168: BRAKE GP-WINCH

211-8168 BRAKE GP-WINCH
S/N CSK1-UP
PART OF 211-8166 BRAKE & PLANETARY GP-WINCH
AN ATTACHMENT
i01616759 SEBP3361
2118168 BRAKE GP-WINCH Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-7321 [6] DISC-FRICTION  
2. 203-6618 [1] HOUSING (BRAKE)  
3. 203-6620 [1] PLATE  
4. 203-6621 [1] SEAL  
5. 203-6623 [7] DISC-BRAKE  
6. 203-6626 [1] RETAINER (BRAKE)  
7. 211-8215 [8] SPRING  
8. 211-8216 [1] SPACER (SPRING)  
9. 211-8217 [1] PISTON  
10. 211-8218 [1] PLUG-ORIFICE  
11. 3Y-9267 [1] BALL  
12. 6V-4495 [1] RING-RETAINING  
13. 8M-4704 [1] SEAL-O-RING  
 

#SEBP33610367
 

208-5546: CASE GP-WINCH

208-5546 CASE GP-WINCH
S/N CSK1-UP
PART OF 179-9513 WINCH AR
AN ATTACHMENT
i01606841 SEBP3361
2085546 CASE GP-WINCH Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9436 [3] PLUG  
2. 8C-6868 [1] CONNECTOR  
3. 203-6608 [1] BLOCK  
4. 203-6609 [1] BLOCK  
5. 203-6611 [1] TUBE AS  
6. 208-0013 [1] CASE AS  
7. 053-1578 [2] DOWEL  
8. 3D-2824 [3] SEAL-O-RING  
9. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
10. 6V-8397 [4] SEAL-O-RING  
11. 6V-8994 [1] UNION (STRAIGHT)  
12. 6V-9850 [1] ELBOW  
13. 7J-9108 [1] SEAL-O-RING  
14. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
 

#SEBP33610368
 

208-5552: CLUTCH & GEAR GP-WINCH

208-5552 CLUTCH & GEAR GP-WINCH
S/N CSK1-UP
PART OF 179-9513 WINCH AR
AN ATTACHMENT
i01606846 SEBP3361
2085552 CLUTCH & GEAR GP-WINCH Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6U-1989 [1] VALVE-RELIEF  
2. [1] CLUTCH-FREESPOOL (34 TEETH)  
3. 162-0175 [1] SPRING  
4. 162-0180 [1] RING  
5. 162-2766 [1] RING-BACKUP  
6. 172-0307 [1] PISTON AS  
7. 203-6640 [1] GASKET  
8. 211-1856 [1] COVER-GEAR  
9. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
10. 3H-3385 [1] SEAL-O-RING  
11. 3J-7354 [1] SEAL-O-RING  
12. 8M-4986 [1] SEAL-O-RING  
13. 8T-4896 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 9B-7237 [14] BOLT (3/8-16X1.25-IN)  
15. 9S-8002 [1] PLUG (7/16-20-THD)  
 

#SEBP33610369
 

180-6193: CONTROL GP-WINCH

180-6193 CONTROL GP-WINCH
S/N CFC1-UP; CFF1-UP
PART OF 174-5993 INSTALLATION AR-WINCH
AN ATTACHMENT
i01597371 SEBP3361
1806193 CONTROL GP-WINCH Parts scheme 1806193 CONTROL GP-WINCH Parts scheme
  For full view, you need register

Parts for your D3G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-9525 [4] BAND-MARKER (ORANGE, R1)  
2. 4I-9531 [4] BAND-MARKER (RED)  
3. 4I-9532 [4] BAND-MARKER (YELLOW)  
4. 4I-9533 [2] BAND-MARKER (BLUE)  
5. 4I-9534 [2] BAND-MARKER (BROWN)  
6. 4I-9535 [2] BAND-MARKER (ORANGE)  
7. 4I-9536 [2] BAND-MARKER (WHITE)  
8. 7K-1181 [2] STRAP-CABLE  
9. 8J-6875 [1] VALVE GP-SHUTTLE  
10. 8T-6907 [1] VALVE-BALL  
11. 180-6195 I [1] HOSE AS  
12. 180-6196 I [1] HOSE AS  
13. 180-6198 I [1] HOSE AS  
14. 180-6199 I [1] HOSE AS  
15. 180-7339 Y [1] VALVE GP-PILOT  
16. 183-6106 I [1] HOSE AS  
17. 183-6107 I [1] HOSE AS  
18. 183-6109 I [1] HOSE AS  
19. 183-6627 [1] ROD  
20. 187-6339 [1] FILM (WINCH CONTROL)  
21. 213-7164 I [1] HOSE AS  
22. 2R-1939 [3] CLIP  
23. 3J-1907 [13] SEAL-O-RING  
24. 4J-5477 [9] SEAL-O-RING  
25. 6V-8397 [16] SEAL-O-RING  
26. 6V-8555 [1] NUT-FACE SEAL (1-14-THD)  
27. 6V-8641 [8] CONNECTOR  
28. 6V-8774 [3] TEE  
29. 6V-8934 [1] ADAPTER  
30. 6V-8938 [1] REDUCER  
31. 6V-9001 [1] ELBOW  
32. 6V-9168 [2] NUT (11/16-16-THD)  
33. 6V-9508 [4] PLUG (11/16-16-THD)  
34. 7X-0820 [1] TEE  
35. 7X-2534 M [2] BOLT (M6X1X50-MM)  
36. 8T-2920 [1] GROMMET (27-MM ID)  
37. 8T-3984 [1] KNOB  
38. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 8T-9358 [1] CONNECTOR  
43. 9M-8406 [1] CLIP (LOOP)  
44. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
45. 180-6197 I [1] HOSE AS  
46. 180-6200 I [1] HOSE AS  
47. 183-6108 I [1] HOSE AS  
48. 200-7798 I [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D3G :

WIPER GP-WINDOW
177-5300 WIPER GP-WINDOW
WINDOW GP-CAB
212-4212 WINDOW GP-CAB
WINDOW GP-CAB
212-4211 WINDOW GP-CAB
WINDOW GP-CAB
179-6482 WINDOW GP-CAB
WINDOW GP-CAB
179-6481 WINDOW GP-CAB
WASHER GP-WINDOW
184-4361 WASHER GP-WINDOW
SUSPENSION GP-SEAT
6W-8502 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
160-7165 SUSPENSION GP-SEAT
BLADE GP-ANGLING
183-2405 BLADE GP-ANGLING
BLADE GP-ANGLING
183-9066 BLADE GP-ANGLING
BLADE GP-ANGLING
184-5413 BLADE GP-ANGLING
BRAKE & PLANETARY GP-WINCH
208-5548 BRAKE & PLANETARY GP-WINCH
BRAKE & PLANETARY GP-WINCH
211-8166 BRAKE & PLANETARY GP-WINCH
BRAKE GP-WINCH
211-8168 BRAKE GP-WINCH
CASE GP-WINCH
208-5546 CASE GP-WINCH
CLUTCH & GEAR GP-WINCH
208-5552 CLUTCH & GEAR GP-WINCH

Truck sale:

Caterpillar D3G
 
Caterpillar D3G
- Crawler dozers
ZIEGLER CAT
 
41,903 
Caterpillar D3GX, Crawler dozers, Construction


Caterpillar D3GX, Crawler dozers, Construction
37,900 
Caterpillar D3GX, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D3GL, Rupsdozers, Bouw
39.512 
Caterpillar D3GL, Rupsdozers, Bouw

MICHIGAN CAT
Caterpillar 2.75 YD3 GP BUCKET, bucket, Construction
4,069 
Caterpillar 2.75 YD3 GP BUCKET, bucket, Construction
- bucket
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.