AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

216-7388 CYLINDER GP-ANGLING S/N FDC1-520; CFN1-1071 69.85-MM (2.75-IN) BORE X 412.5-MM (16.24-IN) STROKE PART OF 174-5988 HYDRAULIC AR D4G


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
LINES GP-CYLINDER
LINES GP-HYDRAULIC

TRACK-TYPE TRACTOR D4G TRACK-TYPE TRACTOR CFN
 D4G XL & LGP TRACK TYPE TRACTORS CFN00001-01071 (MACHINE) POWERED BY 3046 Engine SEBP3362 D4G CFN   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-ANGLING
216-7388 CYLINDER GP-ANGLING
CYLINDER GP-BULLDOZER LIFT
183-3721 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
192-0891 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
192-0893 CYLINDER GP-RIPPER
CYLINDER GP-TILT
183-8459 CYLINDER GP-TILT
 

#SEBP33620230
 

216-7388: CYLINDER GP-ANGLING

216-7388 CYLINDER GP-ANGLING
S/N FDC1-520; CFN1-1071
69.85-MM (2.75-IN) BORE X 412.5-MM (16.24-IN) STROKE
PART OF 174-5988 HYDRAULIC AR
i02391913 SEBP3362
2167388 CYLINDER GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 216-7386 [1] PISTON  
2. 201-1060 [1] ROD AS  
  2H-5549 [2] RING-RETAINING  
  9J-9812 [1] BEARING  
3. 216-7387 [1] CYLINDER AS  
  4D-0298 [1] BEARING  
  1L-4775 [2] RING-RETAINING  
4. 167-2186 [1] SEAL AS-BUFFER  
5. 167-2294 [1] SEAL-U-CUP  
6. 8C-9131 [1] SEAL-LIP TYPE  
7. 6J-5730 [1] LOCKNUT (1-1/8-12-THD)  
8. 175-7895 [1] SEAL-O-RING  
9. 223-5601 [1] HEAD  
10. 4T-6780 [1] RING-WEAR  
11. 4J-9225 [1] RING-BACKUP  
12. 1H-5728 [1] SEAL-O-RING  
13. 8J-0112 [1] RING-WEAR  
14. 5J-7010 [1] SEAL AS  
15. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
16. 006-8663 [1] RING  
 

#SEBP33620231
 

183-3721: CYLINDER GP-BULLDOZER LIFT

183-3721 CYLINDER GP-BULLDOZER LIFT
S/N FDC1-520; CFN1-1071
88.9-MM(3.5-IN) BORE X 347.4-MM(13.68-IN) STROKE
PART OF 174-5988 HYDRAULIC AR
i01595804 SEBP3362
1833721 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 7J-9886 [1] PISTON  
4. 7J-9887 [1] CROWN  
5. 9T-7346 [1] HEAD  
6. 141-2919 [1] ROD AS  
6A. 9J-9812 [1] BEARING  
6B. 2H-5549 [2] RING-RETAINING  
7. 183-3722 [1] CYLINDER AS  
7A. 9J-9812 [1] BEARING  
7B. 2H-5549 [2] RING-RETAINING  
8. 167-2186 [1] SEAL AS-BUFFER  
9. 167-2294 [1] SEAL-U-CUP  
10. 226-8202 [1] SEAL-WIPER  
11. 2H-3931 [1] SEAL-O-RING  
12. 4J-9224 [1] RING-BACKUP  
13. 4T-6780 [1] RING-WEAR  
14. 4T-8054 [1] SEAL AS  
15. 6K-6967 [1] ADAPTER-PIPE  
16. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
17. 7J-9885 [1] RING-WEAR  
18. 8J-7415 [1] WASHER-HARD (28X51X4.5-MM THK)  
 

#SEBP33620232
 

192-0891: CYLINDER GP-RIPPER

192-0891 CYLINDER GP-RIPPER -RH
S/N BHX1-UP
76.2-MM (3-IN) BORE X 194.1-MM (7.64-IN) STROKE
PART OF 186-6421 RIPPER AR
AN ATTACHMENT
i01595615 SEBP3362
1920891 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 8J-0553 [1] PISTON  
3. 8J-5911 [1] CROWN  
4. 9T-7350 [1] HEAD  
5. 193-1546 [1] ROD AS  
5A. 7K-6365 [1] BUSHING  
6. 167-2186 [1] SEAL AS-BUFFER  
7. 167-2294 [1] SEAL-U-CUP  
8. 226-8202 [1] SEAL-WIPER  
9. 192-0892 [1] CYLINDER AS  
10. 5H-8848 [1] SEAL-O-RING  
11. 5P-8250 [1] WASHER (28X49X5-MM THK)  
12. 6J-1972 [1] SEAL AS  
13. 6J-5731 [1] RING-BACKUP  
14. 6J-5733 [1] RING-WEAR  
15. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
16. 8T-5443 [1] RING-WEAR  
 

#SEBP33620233
 

192-0893: CYLINDER GP-RIPPER

192-0893 CYLINDER GP-RIPPER -LH
S/N BHX1-UP
76.2-MM(3.0-IN) BORE X 194.1-MM(7.64-IN) STROKE
PART OF 186-6421 RIPPER AR
AN ATTACHMENT
i01595648 SEBP3362
1920893 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 8J-0553 [1] PISTON  
3. 8J-5911 [1] CROWN  
4. 9T-7350 [1] HEAD  
5. 192-0894 [1] CYLINDER AS  
6. 193-1546 [1] ROD AS  
6A. 7K-6365 BUSHING  
7. 167-2186 [1] SEAL AS-BUFFER  
8. 167-2294 [1] SEAL-U-CUP  
9. 226-8202 [1] SEAL-WIPER  
10. 5H-8848 [1] SEAL-O-RING  
11. 5P-8250 [1] WASHER (28X49X5-MM THK)  
12. 6J-1972 [1] SEAL AS  
13. 6J-5731 [1] RING-BACKUP  
14. 6J-5733 [1] RING-WEAR  
15. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
16. 8T-5443 [1] RING-WEAR  
 

#SEBP33620234
 

183-8459: CYLINDER GP-TILT

183-8459 CYLINDER GP-TILT
S/N FDC1-520; CFN1-1071
88.9-MM(3.5-IN) BORE X 148.0-MM(5.83-IN) STROKE
PART OF 174-5988 HYDRAULIC AR
i01595814 SEBP3362
1838459 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 7J-9886 [1] PISTON  
3. 7J-9887 [1] CROWN  
4. 220-6337 [1] ROD AS  
4A. 4D-0298 [1] BEARING  
4B. 3Y-2768 [2] RING  
5. 9T-7346 [1] HEAD  
6. 183-8643 [1] CYLINDER AS  
6A. 4D-0298 [1] BEARING  
6B. 3Y-2768 [2] RING  
7. 167-2186 [1] SEAL AS-BUFFER  
8. 167-2294 [1] SEAL-U-CUP  
9. 226-8202 [1] SEAL-WIPER  
10. 2H-3931 [1] SEAL-O-RING  
11. 3B-8486 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4J-9224 [1] RING-BACKUP  
13. 4T-6780 [1] RING-WEAR  
14. 4T-8054 [1] SEAL AS  
15. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
16. 7J-9885 [1] RING-WEAR  
17. 8J-7415 [1] WASHER-HARD (28X51X4.5-MM THK)  
 

#SEBP33620235
 

174-5983: HYDRAULIC AR

174-5983 HYDRAULIC AR
S/N FDC1-520; CFN1-1071
FOR USE WITH PAT BLADE AND RIPPER
AN ATTACHMENT
i03436420 SEBP3362
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  178-8032 Y [1] CONTROL GP-HYDRAULIC HAND  
  194-1082 Y [1] LINES GP-REAR ATTACHMENT  
  172-0972 Y [1] VALVE GP-BANK 4  
    -OR-
  216-1634 Y [1] VALVE GP-BANK 4  
    -OR-
  228-1638 Y [1] VALVE GP-BANK 4  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33620236
 

174-5988: HYDRAULIC AR

174-5988 HYDRAULIC AR
S/N FDC1-520; CFN1-1071
PART OF 174-5841, 174-5843 GENERAL AR
i01595771 SEBP3362
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  174-5990 Y [1] CONTROL GP-HYDRAULIC HAND  
  216-7388 Y [2] CYLINDER GP-ANGLING  
  183-3721 Y [2] CYLINDER GP-BULLDOZER LIFT  
  183-8459 Y [1] CYLINDER GP-TILT  
  183-6216 Y [1] LINES GP-ANGLE & TILT  
  174-5991 Y [1] LINES GP-HYDRAULIC  
  174-5992 Y [1] LINES GP-PUMP (IMPLEMENT)  
  137-0300 Y [1] PUMP GP-GEAR  
  194-3098 Y [1] TANK GP-HYDRAULIC  
  174-5995 Y [1] VALVE & MTG GP-CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33620237
 

194-1083: HYDRAULIC AR

194-1083 HYDRAULIC AR
S/N FDC1-520; CFN1-1071
FOR USE WITH PAT BLADE AND REAR ATTACHMENT WITH WINCH
AN ATTACHMENT
i02499892 SEBP3362
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  178-8032 Y [1] CONTROL GP-HYDRAULIC HAND  
  180-3494 Y [1] LINES GP-REAR ATTACHMENT  
  172-0972 Y [1] VALVE GP-BANK 4  
    -OR-
  216-1634 Y [1] VALVE GP-BANK 4  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33620238
 

183-6216: LINES GP-ANGLE & TILT

183-6216 LINES GP-ANGLE & TILT
S/N FDC1-520; CFN1-1071
PART OF 174-5988 HYDRAULIC AR
i01572133 SEBP3362
1836216 LINES GP-ANGLE & TILT Parts scheme 1836216 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-9052 [1] GUARD  
2. 184-1137 [2] PLATE  
3. 184-1138 [2] CLAMP  
4. 184-1139 [2] PLATE  
5. 184-1142 I [2] HOSE AS  
6. 184-1143 I [2] HOSE AS  
7. 184-1144 I [2] HOSE AS  
8. 184-1145 I [2] HOSE AS  
9. 184-1146 I [2] HOSE AS  
10. 184-1149 [2] TUBE AS  
11. 184-1150 [2] TUBE AS  
12. 199-5778 [1] PLATE AS  
13. 199-5779 [1] PLATE AS  
14. 199-5782 I [1] HOSE AS  
15. 199-5783 I [1] HOSE AS  
16. 200-0719 [1] TUBE AS  
17. 200-0720 [1] TUBE AS  
18. 203-2097 [2] HOSE AS  
19. 217-0556 [2] PLATE AS  
20. 100-4336 [2] CLIP  
21. 139-4617 [2] HOSE AS  
22. 1S-0994 [4] CLIP (LOOP)  
23. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
24. 3K-0360 [6] SEAL-O-RING  
25. 3S-2093 [2] STRAP-CABLE  
26. 5P-7462 [3] CLIP (SLOT)  
27. 5P-7463 [3] CLIP (TAB)  
28. 6V-0683 [3] GROMMET  
29. 6V-8397 [19] SEAL-O-RING  
30. 6V-8634 [4] CONNECTOR  
31. 6V-8723 [2] ELBOW  
32. 6V-8936 [1] REDUCER  
33. 8L-5008 [2] ELBOW-PIPE  
34. 8T-1885 [4] CLIP (SLOT)  
35. 8T-1886 [4] CLIP (TAB)  
36. 8T-4121 [30] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
39. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
40. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
41. 8T-4186 M [8] BOLT (M10X1.5X40-MM)  
42. 8T-4192 M [3] BOLT (M12X1.75X25-MM)  
43. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33620239
 

174-5991: LINES GP-HYDRAULIC

174-5991 LINES GP-HYDRAULIC
S/N FDC1-520; CFN1-1071
PART OF 174-5988 HYDRAULIC AR
i01576882 SEBP3362
1745991 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D4G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-9569 I [4] HOSE AS  
2. 179-1293 [1] TUBE AS  
3. 179-1315 [1] TUBE AS  
4. 232-2590 [1] TUBE AS  
5. 232-2591 [1] TUBE AS  
6. 232-2592 [1] TUBE AS  
7. 232-2594 [1] TUBE AS  
8. 229-2051 [1] TUBE AS  
9. 232-2593 [1] TUBE AS  
10. 180-4724 [1] TUBE AS  
11. 180-8645 [1] TUBE AS  
12. 194-3750 I [1] HOSE AS  
13. 194-3751 I [1] HOSE AS  
14. 229-2049 [1] TUBE AS  
15. 209-8707 [2] BRACKET AS  
16. 2M-9780 [6] SEAL-O-RING  
17. 3K-0360 [4] SEAL-O-RING  
18. 3P-5903 [2] CLIP (TAB)  
19. 3P-5904 [2] CLIP (SLOT)  
20. 6V-8398 [18] SEAL-O-RING  
21. 6V-8639 [4] CONNECTOR  
22. 6V-8642 [6] CONNECTOR  
23. 6V-8790 [1] TEE-FACE SEAL  
24. 6V-8981 [2] ELBOW  
25. 6V-9043 [1] TEE  
26. 6V-9169 [4] NUT (13/16-16-THD)  
27. 6V-9352 [2] TEE-BULKHEAD  
28. 7G-2950 [2] CLIP (SLOT)  
29. 7G-2951 [2] CLIP (TAB)  
30. 7J-9108 [15] SEAL-O-RING  
31. 7X-7729 [4] WASHER (11X25X3-MM THK)  
32. 8T-1885 [2] CLIP (SLOT)  
33. 8T-1886 [2] CLIP (TAB)  
34. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [4] NUT (M10X1.5-THD)  
36. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
37. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8T-7529 [4] CLIP  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D4G :

PUMP GP-CHARGE
212-7037 PUMP GP-CHARGE
CONTROL GP-STEERING & XMSN
230-7338 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
220-1135 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
174-5968 CONTROL GP-STEERING & XMSN
174-5905 UNDERCARRIAGE AR
174-5904 UNDERCARRIAGE AR
241-4897 TRACK GP
235-2567 TRACK GP
CYLINDER GP-BULLDOZER LIFT
183-3721 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
192-0891 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
192-0893 CYLINDER GP-RIPPER
CYLINDER GP-TILT
183-8459 CYLINDER GP-TILT
174-5983 HYDRAULIC AR
174-5988 HYDRAULIC AR
194-1083 HYDRAULIC AR
LINES GP-ANGLE & TILT
183-6216 LINES GP-ANGLE & TILT

Truck sale:

Caterpillar D4G
 
Caterpillar D4G
- Crawler dozers
MACALLISTER MACHINERY CO., INC
 
40.000 
Caterpillar D4G, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D4GX, Bulldozer, Bau-Und Bergbauausrüstung
35.512 
Caterpillar D4GX, Bulldozer, Bau-Und Bergbauausrüstung
- Crawler dozers
MICHIGAN CAT
Caterpillar D4G, Construction
37,000 
Caterpillar D4G, Construction
- Crawler dozers
ALTORFER INDUSTRIES
Caterpillar D4G, Construction
80,228 
Caterpillar D4G, Construction
- Crawler dozers
WESTRAC PTY. LTD. (NSW)
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.